Re: Accidentally uninstalled Synaptics TouchPad

Similar Questions

• Accidentally uninstalled paved synaptics touch

  I accidentally uninstalled the Synaptics Touchpad on my Compaq Presario CQ50-115-NR. This happened several updates so I think that the restoration will not help more there. I don't have anything about it because I was using a usb mouse, sound now that the mouse is pointing upwards I want as my touch pad to work. I spent at synaptics and downloaded their drivers and they do always not so I think I need more than just a driver. I need help!

  Hello I Saenz,

  When you purchased the computer first you did a set of recovery discs? Normally, you are requested to make a record of recovery "of the applications and drivers. The Synaptics application should be on it. Try the Compaq site to see if it is available there. I recently bought a Packard Bell (Acer) laptop and I always remove any OEM operating system and install my own full commercial copy of the operating system. However, before doing so, I always do a put reocvery disc so I can return the rear machine factory if I need to sell the machine afterwards. Of course, install the new opertaing system meant that I too lost the use of the touch pad. However, by inserting my drivers and demand recovery disk, I could re - install the synaptic software.

  The alternative is to restore the machine in factory conditions, ensuring that you backup the files/folders/documents that are important before you do. You should consult your user manual to find out how to restore the original configuration. You can, however, re - install all the software that you added after you bought your machine.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Accidentally uninstalled EDT Ware Touchpad Support

  Hello! I have an Acer laptop V3 - 772 G-9820.

  I accidentally uninstalled the EDT Ware support for my touchpad, and now I can't use my touchpad correctly. I can't drag the side or use two fingers down a Web page. I attempted to try and re - download, but so far have failed. If someone could direct me to a download link, I would be eternally grateful that I use my touchpad a lot and I tried to download a software that only made it worse.

  Thank you!

  You still have your recovery partitions?

  http://Acer-in.custhelp.com/app/answers/detail/A_ID/26946/~/reinstall-drivers-or-applications-with-a...

• accidentally uninstalled

  I was uninstalling programs unwanted of my HP Pavillion laptop and accidentally uninstalled my two-finger scrolling feature

  I went on the program of Recovery Manager, but I could not understand that one to reinstall.

  Without knowing what model you have, it is difficult to say for sure 100% that touchpad you have. Who says - search Recovery Manager Synaptics driver.

• Synaptics touchpad folder

  I have a HP Pavilion dv7-6c95dx Entertainment PC that has the Synaptics Touchpad.  Recently, I accidentally uninstalled the Synaptics Touchpad folder and its files that control my touchpad.  He now is erratically, shows an orange light on and turned little matter what I do.  I need to download a copy of the Synaptics Touchpad and install the driver to recover my touchpad features.  Where can I find this download?

  Hello cbuckner7789,

  I don't know what OS you have, but you can select here, then you should see the list of drivers available for download.  It will be inside the section, 'driver - keyboard, mouse and input devices.

  You can also use Recovery Manager to restore your software and drivers.

  Please let me know if it helps.

  Good luck!

• Synaptics Touchpad not working not

  My touchpad driver stopped working yesterday evening. In the morning it was working perfectly and suddenly he stopped. I've uninstalled and reinstalled the driver but its still does not. Please help me

  Uninstall the Synaptics Touchpad drivers via Control Panel > programs and features, restart the computer and install it on day one from here

• Qosmio X 500-116 - Pinch Zoom on Synaptics touchpad sometimes does'nt work!

  Model - Qosmio X 500-116 (windows 7)

  Hi all

  I m occasional annoying problems with my Synaptics touchpad V7.2

  Every now and again the Pinch Zoom on Synaptics Touchpad does not work (it happens about once every 5 cycles). When this happens, I m impossible to enlarge/reduce the size of the screen of internet browsers or msoffice documents. Although I can still use the keyboard to increase or decrease the size.

  I tried to uninstall and reinstall the driver it came with (version - 13.2.7.3) but the problem remains the same.

  I checked Toshiba site for the Synaptics Driver updates for my machine. It lists my current driver 13.2.7.3 and also another version of the 14.0.15.0 driver.

  I figured that I d try to install version 14.0.15.0, that he went through the motions of the facility, then at the end, that nothing happened and he n t installed. So I went back to version 13.2.7.3

  Has anyone encountered this problem? If so, any suggestions or ideas would be appreciated!

  Kind regards

  Bren

  Have you tried the driver for the touchpad that is available on the page of the Synaptics driver?
  http://www.Synaptics.com/resources/drivers

  Check it out and report its operation.

• HP ENVY M6-1105dx: Synaptics Touchpad freezes briefly after typing

  The touchpad of my HP Envy M6 1105dx hangs for several seconds after you type on the keyboard, each time. This problem started after I upgraded to windows 10. My drivers are up to date. I tried to uninstall and reinstall the drivers, but that has not worked. I would rather not reinstall windows if I didn't, so I decided to come here. All advice is appreciated.

  Hey, I had the same problem and it's really frustrating.

  Here's what I did to solve the problem, I hope it helps.

  Open 'Control Panel' by clicking on search and enter the control panel.

  Then, open "Synaptics Touchpad", it will have a version number after it I think. Mine did.

  Then click Advanced in the upper tabs.

  Then you should see that a "filter activation time" set it to zero seconds.

  

  Test now by typing and then move the mouse and see if that fixes the problem... it's me.

• Laptop HP dv6 1355dx Pavilion: Synaptics Touchpad Will not scroll in applications Windows 10 - using HP dv6 1355dx Pavallion laptop

  I was wondering if anyone has found a solution to this problem.  I downloaded all the drivers, registry added/changed, ensure that scrolling is checked and researched point nausium.  Hair is gone!

  Any help is appreciated.

  HOW TO TROUBLESHOOT THE TOUCHPAD SETTING RESET

  1. Download version 18 of the Synaptics TouchPad Driver and software.
  • Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model.  Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down.  Find the download in the category 'driver-keyboard, mouse and input devices.  If a Synaptics driver with a version from 18 number figure, download.
  • If a Synaptics driver with a version from 18 number is NOT listed, download the driver directly from HP (http://ftp.hp.com/pub/softpaq/sp68001-68500/sp68198.exe).
  2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
  • In Control Panel, select administrative tools, and open Services.
  • Go to Windows Update and double-click it to view its properties.
  • Click on stop to stop the service to run.
  • Change the Startup Type to manual, and then click OK.
  4. Uninstall the version 19 of the Synaptics TouchPad driver.
  • In Control Panel, select Device Manager.
  • Click on the "+' beside 'mouse and other pointing devices" to expand this category.
  • Double-click the Synaptics TouchPad of SMBus to view its properties.
  • Go to the driver tab and click on uninstall.
  • Check the box to delete the driver for this device, and then click OK to uninstall.
  5. Uninstall the version 19 of the software Synaptics TouchPad (HP control area).
  • In Control Panel, select programs and features.
  • Scroll down to the area of control of HP (published by Synaptics Incorporated) and uninstall it.
  6. Restart your computer.
  7. Install version 18 of the Synaptics TouchPad Driver and software.
  8. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates for the Synaptics TouchPad driver.  (This will block your system automatically reinstall or display of updates for the version 19 of the pilot).
  9. Change back the setting of Windows Update Services to manual automatic (delayed start).
  10. Restart your computer.
  11. Rejoice!  Your TouchPad settings will save eventually in the sessions again.

• The faulty Synaptics Touchpad on x 2 13-m121sa Split driver causing frost and lack of response from the mouse

  Edit: I found a solution, scroll down.

  I had problems with my new Split x 2 similar to those already explained in the forums by other users. The symptoms are:
  
  1. unusual hanging or freezing of the mouse pointer on the screen and the use of gestures temperament (two fingers to scroll, zoom, etc.).
  
  2. slowdown in the computer in general; acting lethargic and freezing during light use or after closing the display.
  
  The symptoms seem to change according to the duration of the computer was operated and are affected by the screen from the dock of disconnection/reconnection.
  
  Being very good with these things, I decided to investigate and discovered the following:
  
  The root cause of both problems is the driver for the Synaptics Touchpad. While the latest version available on the HP website (17.0.10.9) seems to solve all unusual freezing of the pointer it has a large memory leak. In other words, when you move it on the touchpad pointer uses the memory of the computer. This is normal, but the problem is that the driver for the touchpad does not return memory; It cannot be reassigned. In other words, after a few hours of computer use (or to have the display closed) memory reached saturation point and the version of the computer to a halt.

  If you encounter the same problem take a look for yourself: open the Task Manager and look at the performance tab. Under the brief entitled you will find a value for "Non paged pool. With the computer idle, this number will not rise, but move the mouse and you will see it go gradually upwards without return. I have confirmed this to be the Synaptics driver using the Windows tool poolmon.exe - the culprits are the Irp and SynT.

  About the solutions, I tried a lot - but there is no absolute solution.
  
  You can uninstall the Synaptics Touchpad driver and the problem will disappear - the memory usage is no longer freezing or high. But unless the driver that the computer is to use the standard Windows driver - there is therefore no multitouch gestures like scroll or zoom in.
  
  I tried to install the generic Synaptics driver available on their site, and the computer will not allow him. Regardless of this, I forced the installation of the driver, but the generic driver does not work with this Touchpad anyway (error code 10). I tried the latest version (17.0.19) and a former one (16.2.21) without success. Even earlier (e.g. 15.x.x) refused to run on the grounds of incompatibility.

  HP support suggested a "Refresh" of system setting to factory, but put aside from the huge inconvenience of time and losing files - I know that this does not work either. Apparently a clean install worked for a single user - but for this you need an installation of Windows or USB disc that I did not - and I am skeptical that it would work anyway.
  
  So now I use the touchpad driver Windows standard without being able to scroll, zoom or use them slide-in gestures of Windows 8.1.
  
  If a representative from HP is reading this, I strongly suggest that this issue be escalated. A simple update to Synaptics could solve this problem which is causing the computers people freeze and lose your support staff time.
  
  TL; DR: Driver HP Touchpad is defective and causes a memory leak. Synaptics has generic drivers do not work. And the standard Windows drivers are not satisfactory.

  SOLVED!
  
  Through my own research I found a solution. While the most recent driver listed under this model is 17.0.10.9 it is actually a newer version which doesn't have this problem: version 17.0.10.16!
  
  I am always disappointed that HP has not suggest this solution themselves, given this driver was published in November 2013! HP if you're reading this: Please allow this driver for this model in your support pages.

  In any case, the solution is:
  
  1. open Device Manager (Control Panel-> hardware and sound-> Device Manager)

  2 in the 'mice and other pointing devices' open «HID Synaptics TouchPad»

  3. in the "Driver" tab, click "Uninstall".

  4. the pointer will disappear - restart the computer

  5. download the new driver from here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=uk & lc = on & softwareitem = ob-127354-1

  (if that link fails try to search online for 'synaptics driver 17.0.10.16')

  6. open and install the driver

  I hope this helps. HP, please send my consulting fees through PayPal (!)

• My synaptics touchpad will not work

  My synaptics touchpad does not work I uninstalled and did everything in the control panel but I don't know what to do.

  Please help me.

  How to operate?

  Hello

  First, it would really help to know something more on the model of the laptop, installed windows OS, etc.

  Have you tried to activate the touchpad through Fn + F9?

• Satellite L955 - 10K - Synaptics Touchpad Driver is not working properly

  Hello, ASRR here.

  I had a problem with my driver for the Synaptics touchpad yesterday. I'm very used to use the "gestures" to work with my touchpad and the gestures did not work properly (in fact at all) for a while. Scrolling with two fingers, three fingers touch and others (in fact all the gestures) no longer work.

  The cursor moves, and works fine but not gestures.

  When I go to mouse option in the Control Panel, a window appears indicating that the PC is "Unable to connect to the Synaptics Pointing Device Driver." and asks me if I want to uninstall.

  I have tried to uninstall, and then go on to Toshiba support page and download a driver that has been adapted for my model, operating system, etc..

  When I implemented the driver I downloaded and restart the PC, the same window appears when I try to go in mouse options in Control Panel and gestures don't work.

  An interesting thing I noticed though, is the fact that when I back the driver (in the settings to properties then Hardware) gestures do FINE. However, as he always asks you to restart the computer for Rolling back the driver will take place, when I restart it, it defines the Microsoft 2006 touchpad driver. who does not understand the gestures that I need.

  I tried several times to fix it, but I can't. I went the UEFI firmware set up and tried to restore default but without success.

  I really don't know what to do. Could someone please help?

  My Toshiba model is a Satellite L-955-10 K with a 64-bit processor and system of operating Windows 8 initially installed.

  Any help would be greatly appreciated. Thank you

  > I went the UEFI firmware set up and tried to restore default but without success.
  How to understand this? Have you tried to put your laptop to factory settings?
  To be honest I don't understand what the problem is here. I also thought that the new driver installation can help but obviously it didn't help much.

  I don't know if this is an option for you, but you can set laptop to factory again and I hope that everything will work properly again. Before doing this test also to roll back OS to an earlier time using System Restore option.

  One last thing: it has nothing to do with your touchpad problem, but I recommend you create a recovery (recovery backup image) using pre-installed recovery media creator media.

• touchpad does not work until running Synaptics touchpad

  Hello

  I bought the Hp pavilion dv6 - 6 c 55 and I have problem with my touchpad. Its functions (scroll, zoom, two finger scrolling,...) fact does not not after cranking up that I run Synaptics touchpad version 7.5. I am using windows 7 Home premium 64-bit, which was on my laptop when I bought it. I checket from msconfig.exe items and my touchpad driver has been chosen, how can I solve this problem? I appreciate if there is no solution and help me.

  Hi Last_man,

  Thank you for visiting the Forums HP's Support and welcome. I read that your wire on your HP Pavilion dv6 - 6 c 55 Entertainment Notebook and questions with the here is a link to the download version more returned for Windows 7 because I think you are using the version for Windows Vista. You may need to uninstall the version you have now and restart the computer, it should automatically update the new version in for you.

  I hope this helps.

  Thank you.

• HP 15-p097tx: Synaptics TouchPad Driver for Windows 7 64 bit (sp69001 and sp67269) does not work

  Hello

  I just baught HP Pavilian 15-p097tx, which came with Windows 8.1. I like not this OS so I installed windows 7 64-bit Ultimate and after installation of the hp Synaptics TouchPad Driver (sp69001 and sp67269) support, the system Web site goes crazy, I mean windows deselect automatically and when I try to access the touchpad from the Control Panel options the system hangs. Help, please

  Thank you.

  Hi @SushmitMazumdar ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-p097tx and the problems with the driver for the Synaptics TouchPad. If you uninstall the driver and restart the laptop, it will install automatically the best driver.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system.

  I hope this helps.

  Thank you.

• TouchPad not turn after update of the synaptics TouchPad driver

  Once I had updated my synaptics touchpad, there no toggle.

  I started to update from this link:

  http://www.Synaptics.com/resources/drivers

  the other features work well.

  my laptop is pavilion g6-1150sx

  Hello

  It seems that the generic Synaptics driver does not support this function if you want that this possibility of return, so you'll need to reinstall the version of HP as follows.

  First, download the installer of the Synaptics driver on the link below and save it in your downloads folder.

  Driver Synaptics - Windows 7.

  Driver Synaptics - Windows 8.

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K