Notes - cannot sync between El Capitan and the Mavericks

Similar Questions

• Dual Boot El Capitan and the Mavericks?

  Currently I got a MacBook Pro retina 13inch end of 2013 OS X El Capitan. For various reasons, I need to be able to dual boot my mac with OS X Mavericks (I have to run the suite Adobe CS6 for College) but the same time, I want to be able to keep in front of the new software updates and use cc creative cloud at home, would it possible for me to do this or at least get off at Mavericks? The MacBook is not new, and therefore does not have a warranty so I don't have to worry to invalidate even though I'd like to keep hold of my data.

  Thank you

  In theory that Macbook can be found on the Mavericks, since it was initially delivered with the Mavericks, but not the same disc:

  My guess is that you can try this:

  a. make backups of backups backups, TimeMacine at least one backup.

  b. connect an empty external drive: Diskutility opened and partition: partition 1: table of Partition GUID and Mac OS extended (journaled).

  Run CarbonCopyCloner on your startup disk and clone the boot to the external disk, including the recovery Partition.

  Restart after that, while now the Alt (option) key: the startup list will come to the top, choose the newly formed external to start.

  If everything works this external:

  c. stop the machine again once, start it up while pressing CMD + R + Alt (option): This starts the InternetRecovery partition: choose erase and install the OS (original). This should install the Mavericks.

  Restart the mac: it should be in the Mavericks now. Install apps for the Mavericks. Restore your data to user for these applications.

  (d) given that both drives are bootable, you can now start all holding the key Alt (option) and choose the one you want.

  I'm not really sure that I forgot something, but I'm going to ask some people to enter and contribute. Wait until you are satisfied.

  Lex

• Notes will not sync between my Mac and my iPad

  Hello. I noticed that my Notes are not sync between my iPad and my Mac.

  In my iPad I have iOS 9, in my Mac I have the Mavericks.

  I checked in iCloud dot com, and my notes of the iPad are here,

  but my notes from my Mac are not there.

  I'm not sure but I think that this started happening after I upgraded to iOS 9 on my iPad.

  Any ideas that I can synchronize Notes between my Mac and my iPad?

  Thank you.

  You must upgrade to a later version of Mac OS X, because these Notes are created in the new application 'Notes' that is only supported by iOS 9 and OS X El Capitan.

  http://www.Apple.com/OSX/how-to-upgrade/

  I hope that answers your question.

  Best regards

  Austin

• Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  You have placed your beam to insert at the end of your text on page 13 and then apply Insert menu: Page Break? In the v5.6.2, Pages I just add a new page to a section of four pages to this approach.

• I created a my page book epub file, and it works perfectly in ibooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  I created a my page book epub file, and it works perfectly in iBooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  What's not?

  You must check the iBooks category in your OS X system preferences: Panel iCloud: iCloud Drive: Options: Documents Panel. On iOS, you must have enabled to iCloud and in the iCloud Drive location setting iBooks. Also, in iOS parameters: iTunes and App Store, ensure that iBooks is running.

  The iBook.epub file is a compressed/compressed and renamed folder that represents a single file to any email client. What do you mean, it cannot be sent correctly - and it's your experience, send, or the failure of the recipient to view the ePub document? What email client?

• The more ploblems between El Capitan and opening 3.6

  Following the publication of the last El Capitan and the report that the question of profiling to screen has been resolved, I have a few questions.

  • Are there other issues pending? I heard about thumbnails being backwards.
  • Are claimed in El Capitan Yosemite real speed improvements? (Not specifically an opening issue but relevant).
    • I still use Yosemite and find that very slow compared to the Mavericks despite Apple claims that Yosemite has been faster. I have very long boot time and some applications are taking ages to open or simply crash (E-mail for example).
    • I use a MBP 15 mid2012 with a disk HARD of 500 GB, screen high resolution (not the retina) and 16 GB of RAM.

  Thanks for your help.

  Robert

  Tonight, I installed the update of El Capitan for MacOS X 10.11.2.

  Opening is always present. I have all the problems of speed, but I've ever had.

  But the problem with wrong thumbnails in the list view persists.  I can live with that.

  

• I formatted and reinstalled xp to correct some problems and my multimedia audio and video vga drivers were lost. I do not have a CD with info and the Add Hardware Wizard cannot find the drivers. How can I fix it?

  I formatted and reinstalled xp to correct some problems and my multimedia audio and video vga drivers were lost. I do not have a CD with info and the Add Hardware Wizard cannot find the drivers. How can I fix it?

  You may be able to download the drivers from the web site of the manufacturer of the computer.

• Hello! so I create a character with long hair, but the thing is it attached on the face and body, cannot move/dangle by itself. and the eyebrows can not move

  Hello! so I create a character with long hair, but the thing is it attached on the face and body, cannot move/dangle by itself. and the eyebrows can not move

  For groups or layers Warp independently of their parent group, add a "+" to the beginning of the name of the layer in PS / HAVE. It's the same select group in the Panel of puppets and by checking the Warp option independently in the properties panel.

  Once a group is warping independently, it will be attached to its origin at the origin of the group from its parent by default. You can join a different handful in the parent using the fix to the popup in the properties panel. In Preview 3, if you want to move the origin, you need to do in PS / HAVE. In future releases, you will be able to change the origin directly in the Panel of the puppet.

  If this doesn't solve your problem, you can post a screenshot of the hierarchy of layer here, to see if there is another structural problem.

• Is there a way to sync between my table and my phone? I don't want to have my office involved.

  I would like to sync between my Tablet and phone. I don't want to share with the office. Is there a way to do this?

  Hi, you will need to create a sync account on the desktop, but does not synchronize the activity of browsers. After having a key synchronization you can use it between your devices.

• I keep getting "the trust relationship between this workstation and the primary domain failed" error windows 2008R2

  Hi all

  I appreciate your help. And I hope that this issue has been addressed previously, although I couldn't find any solution there.

  I manage a domain windows 2008 with 3 domain controllers. Recently my workstations continue to fall out of the field. I get "the trust relationship between this workstation and the primary domain failed" to many workstations.

  I know how to fix properly, use netdom.exe. But the mistakes keep coming back. I don't know where to look for the source of this error. A possible problem might be the time in any field is out of sync. But all my workstations synchronize with the domain controller with the primary domain controller role and seems to work correctly.

  Are there other sources, that I need to check? This is getting frustrating.

  Thank you much for the help.

  Sincerely,

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer.

  I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer. The computers are connected by a switch, fixed IP addresses that are correctly configured and point to a DNS server outside the network. When I try to open the icon for one of the computers, he asked for credentials. I try to type the user name for the computer that is sharing the resource and the password. It is the user account whose computer is loged on and belongs to the Administrators group. for example: user name (Computer1\username) password (password). It does not work. The Windows Firewall is disabled on all computers. It worked well there 2 days. I can't find anything wrong with the network settings. Does anyone have a solution? Thank you.

  If the portion of the machine has activated - Simple file sharing (i.e. it is XP Home or it is XP Pro with Simple (default) file sharing) - while all file sharing connections authenticate as user 'guest '.  It will not matter what username / password you provide, it will attempt to authenticate as 'guest '.  If the guest user has received a password or the guest account is not active, you will experience the symptoms you describe.

  If the serving machine running XP Pro and Simple file sharing is disabled, then you should be able to connect by specifying the user as computer\user and the password to connect.  To turn off Simple file sharing:

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  Also:
  "Description of the account in Windows XP"
    <>http://support.Microsoft.com/kb/300489 >

  HTH,
  JW

• My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem of password of account, without that we can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid.

  Hi, I hope you can help with this problem. A friend has 6 computers networked to a Tower Server and have a problem. A worker student put computers into hibernation, and since then, nobody can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid. I tried to get into the pc to try removing network and replace it, but I can't get on the Administrators account because it has been disabled. I'm at a loss on how to proceed. My friend cannot afford a service call, so I'll try to help him.  Thank you

  If the computer is on a domain then there are at least two accounts that can be used to remove the computer from the domain:

  • A domain administrator account.
  • A local administrator account.

  When your friend has launched Windows for the first time after buying the machine, he was prompted to enter the name of an account. This account is created automatically with administrator privileges. He should use it now.

• The trust relationship between this workstation and the primary domain failed.

  The trust relationship between this workstation and the primary domain failed.  This only happens on the Windows 7 desktop.  It is sporadic.   Add the computer account to the domain is not a viable solution.  It happens far too often.

  There is nothing coherent we found on systems that are removed from the field.  Some time its workstations users, sometimes its laptops to students and sometimes he posts of laboratory work.  Different types of systems use different images.  All images are syspreped before creating the image.

  Hi Geoffrey,.

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question on the Technet Windows 7 Security Forum

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.