Similar Questions

• Songs are not playable on the Iphone after itunes syncing

  Hello

  I have a big problem, I synced my iPhone 6 with iTunes on my PC Windows 8.1 (both have the most recent version of the software installed), but now, nearly half of my songs are included on the Iphone but gray and cannot be played with itunes there is no problem playing them.

  

  Not all the songs are bought on itunes, that some are other portals of the time download before I used iTunes and some are CD. Until I synced the majority of my songs worked perfectly fine now with about 50 songs playlist can play around half of the songs is not available... If I click on it I get two different messages:

  

  

  seriously what is that, I do not use Apple, iCloud or game music and that you don't want to listen, I want to just my music files on my computer to be synced my Iphone so I can listen to.

  These are my settings on the iPhone:

  

  What I did yesterday was to remove all music from my iPhone via iPhone options, after I made a link to my PC and sync the iphone without music, then I restarted the iPhone by holding down the home button and lock until she has been reset, after it restarts I have once again it connected to PC and sync all my music (so I thought) back to the iPhone , but after this process even more music was missing, before I had only a few songs don't sync, but now half of the songs is not playable.

  Can someone tell me what is the reason for this and how do I solve it, I want to listen to my music and I don't understand why it does not work, where some dreams perfectly worked well yesterday.

  The following steps should resolve things:

  1. Backup of your device.
  2. Restoration as a new device/factory.
  3. Restore the backup that you made earlier.

  TT2

• can not detect the iphone after upgrading 12.5.1.21

  Set to update to the latest version of itunes (12.5.1.21) and now itunes does not detect my iphone.  tried to remove the lockdown folder. tried to restart all devices.

  Windows 10 with all updates installed. Someone at - it suggestions?

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the alternate build Download iTunes for Windows (64-bit-for older video cards) , which is sometimes a useful workaround.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you're back 12.5.1.21 to 12.4.3.1 or 12.4.2.4, for example, then you will also need to restore the database of the library using the method described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• CPU is not allow to the machine after upgrading ESX 3.5 vSphere4

  I upgrade the host ESX 3.5 to the vSphere4.Upgrade process has been completed successfully, but an error message shows on the screen of welcome to vSphere 4.

  "TSC: 1256115 CPU init:461: The Execute Disable / feature no. Execute CPU is not allow the machine."

  The host machine hardware specification is blew

  Model: IBM eServer BladeCenter H...

  CPU cores: 4CPus x2.333GHz

  Process type: Intel (R) Xeon (R) CPU

  5140 @ 2.33 GHz

  Please help...

  Depending on your server, in select BIOS of the server "Advanced Setup"-> 'CPU Options', you should see 'CPU Execute Disable Bit' and 'Intel Virtualization Technology. Make sure that both are set to "Enabled".

  After you save the BIOS settings, make sure you can completely cycle the server (cold boot).

  André

• Default document do not put in the spotlight after upgrade to CF10

  Windows 2008 R2

  10 ColdFusion

  IIS 7

  We have just upgraded our production server (clone, not yet in production) of CF9 to CF10. The problem seems to be that the document by default/welcome is nto showcased. Example:

  If I go to http://Server/dir/default.cfm everything is cool, but if I go to http://Server/dir/ , I get an error 404

  When we moved from our test box, we had a few problems, but it was not a. I went ahead and delete and added the default docs in IIS, as well as in the web.xml (Tomcat) and applicationHost.config file. I also removed and added the IIS site via wsconfig (and once manually). The IIS server serves all cfm files, fine etc, it is just using the dir only.

  SOLVED

  I activated the errors detailed in IIS and could see as a contradiction with the default document in IIS. He was a clone, so don't know why it was a problem, but I deleted the default documents in IIS for server and left at the local level, I swear I checked that first and saw as local inherit, but you know once you start to manually edit the web.config file, the trouble begins.

• I can't delete the photos that have been sent to the iphone after upgrading to 9.2

  When I start the 9.2 update, the back up has started downloading the pictures from my imac to my phone. I stopped the backup, but those who forced wasn't in the camera where I can remove them. They are new albums and when I select that the trash grey. Is there another way to delete?

  you do the opposite of this Sync photos from your computer to your device via iTunes - Apple Support iOS

• Calendar not syncing with the imac to the iphone

  Since getting my new iphone 6 s, my calendar was not syncing with the iMac. It's with the iPad

  I tried both icloud and itunes with no luck

  Hi Torquoise,

  Thank you for your participation in the communities of Support from Apple.

  I see that your iPhone 6s is not synchronize calendars with your iMac using iCloud or iTunes. You synchronize your iPad using iCloud?

  I would suggest troubleshooting and first with iCloud because you want to synchronize between your Mac and multiple iOS devices.

  Get help using iCloud calendar.

  Best regards.

• How to remove original pictures of the iPhone after sync with computer

  Once upon a time, after syncing my iPhone with my computer (via iTunes), I would get the option ' remove the originals of the phone? These days I can't find any setting that allows me to do. Is this now sort to automatically delete the originals of the iPhone after a synchronization?

  If not, is it possible to remove photos in bulk to the iPhone, apart from the use of select check each photo I want remove? So painful. Even a "Select all" option would be useful.

  Do you use the library to iCloud?

• iTunes could not connect to the iPhone "iPhone", because an invalid response was received from the device.

  So I am a new iphone 7. I had a 6 before that. Everything was fine until the day where I got the 7, I decided to try a manual on itunes for my 6 backup so that I could put this on the new phone. I use now icloud backup but before that he always did on my computer. Its itunes version 12.2.2.25 as it is the most recent, that I can run with 10.7.5 which is the newest my mac pro can work without hacking it. Again, never had a problem before it save and use it to transfer music. Anyway, I received the message "iTunes could not connect to the iPhone"iPhone"because an invalid response was received from the device." I tried 3 different usb cords. I tried both ports to the front of the computer and all 3 in the back. Abandoned and did a backup icloud. Installed on the new phone. Everything transferred except my music library which is real download of my CD via itunes. If something was wrong on the iphone 6, surely the new phone that starts with a clean slate will be very well... wrong.  Same message. Leaves through ports, cables, etc. Is it just a simple matter of ios 10 now works with my version of itunes?

  A new phone will be iOS10.  iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. OSX 10.9 and 10.10 are no longer available. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

• iTunes could not connect to the iPhone, because an invalid response was received from the device.

  Just bought an iPhone 7 today and received the error message "iTunes could not connect to the iPhone because an invalid response was received from the device." Don't know what that means, and I have never had this problem with one of my previous iPhones. Thank you.

  You run iTunes 7.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• Just bought an iMac, can not sync with my iPhone 6, constant vibrates once I plugged.

  bought an iMac, unfortunately can not sync with my iPhone 6 64 GB, constantly vibrates once I plugged. Pls advice.

  Plug the phone on the iMac and follow the instructions to sync your iPhone, iPad or iPod touch with iTunes via USB - Apple Support

• Creative cloud storage limit not sync with the management plan. 2 GB display on the application instead of 100 GB.

  Creative cloud storage limit not sync with the management plan. 2 GB display on the application instead of 100 GB.

  Hi Christian,

  Please check the help below document:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Kind regards

  Sheena

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• -What it means and how to fix it? iTunes could not connect to the iPhone from the iPhone Simon Young, because an invalid response was received from the device.

  iTunes could not connect to the iPhone "IPhone by Simon Young", because an invalid response was received from the device.

  You have upgraded to iTunes 12.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.