Notification of App calendar activated after each reboot

Similar Questions

• Firefox cleans the exceptions list 'Allowed Sites - Installation of modules' after each reboot.

  Firefox cleans the exceptions list 'Allowed Sites - Installation of modules' after each reboot. I tried the new own profile - everything works fine. I don't want to installation and implementing all addons after reset of profile, so try to understand the problem.

  Compensation for the "Site Preferences" (in the "Clear recent history" or Ctrl + Shift + Delete) same for the "last time" helped.

  (permissions.sqlite contained an empty table instead of default lines)

• AVG detects viruses, C:\sccfg.sys if I scan and delete, it will appear after each reboot.

  Original title: C:\sccfg.sys

  AVG detects C:\sccfg.sys
  What is a rootkit?
  How can I get rid of it permanently?
  I ask AVG Anti-virus (free) to cope - AVV, then asks me to restart the computer
  After the re - start AVG advises me that the threat has been eliminated.
  AVG analysis finds no problem for the next (approx.) 2-3 weeks
  Then, the threat is detected again.
  I have lived this cycle several times now.
  BUT I want to get rid of the threat for good.

  Internet search suggests this threat comes from a program called "Folder Lock", (which I had installed for several years) but AVG has only been reported as a threat for maybe three months.
  Research on the Internet tells me that the problem cannot be solved by uninstalling "Folder Lock"

  How can I get rid of this threat?

  Hi Leeds,

  It seems that AVG detects C:\sccfg.sys as virus, if you scan and delete, it will appear after each reboot.

  Let's run the virus scan in safe mode with networking:

  Check out this link to start your computer in safe mode with networking:

  A description of the options to boot in Safe Mode Windows XP http://support.microsoft.com/kb/315222

  After starting in safe mode with network, virus using AVG anti-virus scanner.

  With AVG Anti-virus, perform a full scan using the Microsoft Safety Scanner.

  Refer to this link:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps!

• My desktop icons keep stepping back to the left side down after each reboot.

  Micons office keep movong

  I am running Win XP with Vista Upgrade. All of a sudden my desktop icons keep stepping back to the left side down after each reboot

  I am running Win XP with Vista Upgrade. All of a sudden my desktop icons keep stepping back to the left side down after each reboot

  Try this tutorial. It worked for me when I had Vista 32 bit. I used to have more than 150 shortcuts on deskops, and they tended to move 'by themselves' as you said. This tutorial below worked for me.

  http://www.howtogeek.com/HOWTO/Windows-Vista/save-and-restore-desktop-icon-layout-in-Windows-Vista/

  Note: the tutorial is done for Vista 32 bit.

  Is a 64-bit installation program which I have not tried. I can't guarantee that.

• Downloaded Windows 10. Yet, after each reboot, windows 7 restart... no windows 10?

  Original title: Windows 10

  I have a laptop with windows 7 installed. I ran a few the applet to see if the laptop is eligible. He did, and I see the windows icon 10 appearing in the task bar. I click on it to get the upgrade and windows starts the download process. Then after it is downloaded double click on the file and it seems to be the installation. This seems to go to the end and I restarted several times when asked to do so.

  Yet, after each reboot, windows 7 restart... no windows 10.

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Folder permissions resets automatically after each reboot

  Hello

  I have windows 7 x 64 user. There is a problem with google reader I need different from that of the default permissions for C:\Users\\AppData\Local\Temp. I changed the permissions in this way: make a right click-> Security-> advanced-> permissions-> change approval-> clicked on include... inherited permissions and replace the child object permissions... Also, the folder option, I changed the hidden folders. However, after each reboot, I see not hidden files (hidden folder option resets to do not show hidden file) and permissions for resetting folder above. What causes reset of the changed properties? I have no optimizer tool except ccleaner. I use mcafee antivirus. I think that mcafee is unlikely to cause this problem. 
  How can I solve this problem? I tried to make the batch file that runs boot, but I can't use option "inherit permissions". I give you the batch commands:
  ICACLS C:\Users\\AppData\Local\Temp /setowner directors

  ICACLS "C:\Users\\AppData\Local\Temp" / grant everyone: F
  But these commands do not work to change the permissions in the manner described above.
  Help, please. Really need help.

  ICACLS C:\Users\\AppData\Local\Temp /setowner directors

  ICACLS "C:\Users\\AppData\Local\Temp" / grant everyone: F

  But these commands do not work to change the permissions in the manner described above.

  Help, please. Really need help.

  There was a similar post last week which unfortunately has fizzed out (as do about 95% of all messages...).  Maybe you can gather enough energy not only to track down the source of your problem, but also post an answer here.

  The following commands do not work:
  takeown /f "%Temp%" /.
  Cacls "%Temp%" / t/g everyone: F
  (answer Y to the prompt)
  And Yes, I know cacls.exe is deprecated. But it still works!

• I tried to upgrade to Firefox Ver 28, but after each reboot it always shows the version 27.0.1

  I had been using Firefox Ver 26 and each time it restarts, there is a prompt to upgrade to version 28. I tried to install the upgrade and even after a reboot, continued the old version. Twelve, I uninstalled Firefox and installed new worm 27.0.1 when I check for the upgrade, it downloads a 15 MB file, but continues with worm 27.0.7 even after reboot. Am I missing something?

  1. Download the installer for the language you are interested in.
     • http://www.Mozilla.org/Firefox/all/
  2. Release of Firefox.
  3. Uninstall Firefox from the control panel. DO NOT tick the option on the deletion of your personal data and customizations.
  4. Run the installer downloaded previously.

• Having to reinstall the Flash after each reboot.

  Windows 7 - IE9 - Flash version 11.0.1.152 - Plugins and OS update - ESET Smart Securty 4

  I am prompted to install the new version of Flash after a reboot, then, it happens at least once a day.

  I have install Flash and he moved very well and works until the PC starts again.

  I tried some of the following:

  -Use the Adobe Flash uninstaller before installing

  -Using the stand-alone Installer

  -Checked filter ActiveX and it has been off... turning on the causes

  This same behavior, but the problem I have has nothing to do with the filter

  Not sure when this started, but the user does not have this problem until recently.

  I use ESET Smart Security 4. On all of our systems, and that his PC is the only

  one that has a problem. Need elements pretty hard until I took the trouble

  with uninstall ESET just to see if that would help.

  The part that is really strange... If I manage add on, when it is running,

  I see that the Flash player it and name of Adobe here and that it is enabled.

  After I reboot and go into the Add-ons Manager, Flash is still there and still

  activated, but it now says "Unknown" instead of "Adobe" and is therefore no longer

  other programs Adobe listed. But then, when I reinstall, which becomes

  'fixed' and now, Adobe still says. So it seems almost like a problem of IE9

  and maybe a problem of corruption. No known problems with the PC. I guess

  reload from PC to starting from scratch would fix the problem... at least I hope he would,

  but I'm not ready for the main surgery if there is an easier solution.

  The TakeOwnership script took care of the problem. I'm not 100% OK with it, because it seems to just move UAC and a decrease in security. But at least it now seems to work the way it is supposed to in IE9 and I still probably charge this PC from scratch at an opportune time. Thank you!

• Computer failed to recognize 'Expert MMO Gaming Mouse Razer Naga' after each reboot.

  I have a razor naga, I had Software Web site that work very well for the pilots.  I had install a 2.0 synap every sence when I start my computer with my pc does not but the razor on the rise. I have to unplug the mouse and plug it back it to this work.

  Original title: Razer Naga Expert MMO Gaming Mouse

  Hello

  1. What version of the Windows operating system installed on your computer?
  2. What is the model number of mouse?
  3. What is the make and model of computer?

  Try the following basic methods and check after each method:

  Method 1: Run hardware and devices Troubleshooter.

  Method 2: mouse, touchpad and keyboard with Windows problems

  It will be useful.

• I get a blue screen for a few seconds after each reboot.

  Can you help me find how to solve this problem? Whenever the computer is now receiving a blue screen of death about 20 seconds after I see all my icons on the desktop after a reboot. I write this in safe mode on my computer.

  EMERALD ASH BORER

  These were related to fsni32. sys that is a pilot of F-secure.  I remove it and replace it with MSE

  You must also seriously update to SP2, without it, you're an obvious target for malware.

  http://www.Microsoft.com/security_essentials/

• Create a Windows 7 user profile which resets after each reboot.

  I want to configure a limited in Windows 7 user profile that performs the following steps after EACH restart or disconnection:

  • Reset the background / theme
  • Reset the desktop icons / shortcuts
  • Network mapped reset drives
  • Reset saved passwords
  • Delete the data stored since the last session
  • Remove newly installed applications / block the installation of the application
  • Reset the print queue to empty - if it was not already
  • Reset the default printer
  • Reset the homepage Internet Explore & settings
  • Reset the screen resolution

  The idea is to create a profile for workstations in an office of the admin who works a bit like an internet café. They have a couple of shared workstations, a network printer, and they store the data on a file server and work on a local application server.

  The current problem is that they constantly record their passwords, remove network drives and change the General configuration of work stations (by chance), which makes it difficult for other users to work - that they do not recognize the look & feel and now don't know where to do what.

  I want to create a 'shared' user profile where they can log on, and everything looks familiar. All settings are saved as defaults and no matter what you do, as soon as you log out or restart, the parameters of return by default.

  I would appreciate help.

  Here are a few options:

  • Windows steady state (http://www.microsoft.com/windows/products/winfamily/sharedaccess/default.mspx). The product is supported for Windows XP and Vista, but maybe it works for Windows 7 too. Or maybe there is an equivalent Windows 7 somewhere.
  • Create a scheduled task that runs at boot time. You must run this command:
    Robocopy c:\Users\UserName.bak c:\Users\UserName/s / r: 1 w:1 /MIR /IS /IT /np 1 > c:\Windows\temp\restore.log 2 > & 1
    Note this:
    -Before starting, you must use the robocopy command in reverse so that it fills the C:\Users\UserName.bak folder.
    -The task must be run under the system account.
    -The task will run with the highest privileges.
    -Use during the testing of the installation log file. Subsequently you can pass you.
    -L' tool does not reset passwords. You must create a policy that prevents users from changing the password.

• Status of Volume failure redundancy mirrored after each reboot with Windows 7 Ultimate edition.

  I have 2 x 2 TB hard drives that I put as dynamic disks and mirrored Volumes (software through Windows 7). There are data on the disks and when I created first the mirror and he finished re-synchronization status has been set to healthy. Now after restarting the computer the disks come with a warning in management records indicating the failure of redundancy. I can reactivate the disk and it synchronizes and back healthy (which takes all day) but after a reboot it says has a failure of redundancy again.

  Have not been able to find something that helps or stops this from happening.

  I just changed 1 TB for windows changed 2 TB disks numbers of himself...

• iMessage and facetime activation requires after each reboot.

  Hello

  I updated my iphone 6 + with ios10 update and since after that whenever I restart my device I need to reactivate my cell phone for iMessage and facetime and make me pay for activation causing SMS carrier charges.

  To confirm that I'm not changing any how sim or anything like that just a simple reboot and I need to recheck my number every time with activation of SMS.

  Hey pulkitgupta23,

  I understand that you have a problem with your iPhone and iOS 10 where you have to reactivate your phone number for iMessage and FaceTime, every time that you restart your iPhone. We want to help you to get to the bottom of this and resolve this problem, so let's start with a few basic steps. I have some suggestions for you in the following article that could help us solve it correctly:

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

  Check your camera settings

  1. Make sure that you are connected to a Wi - Fi or cellular data. If you use an iPhone, you will need the SMS messaging to activate your phone number with iMessage and FaceTime. Depending on your operator, you might be charged for the SMS.
  2. Go to settings > general > Date & time and make sure that you have configured your time zone correctly.

  Stop and restart iMessage and FaceTime

  1. Go to settings > Messages and turn off of iMessage.
  2. Go to settings > FaceTime and turn off FaceTime.
  3. Restart your device.
  4. Turn on iMessage and FaceTime.

  Try following these procedures, such as written and let us know the results. If the problem is still not resolved, try to provide as much detail as possible in your message tracking, including information on the first time, you have noticed the issue and source of your internet connection when the question is displayed. Thank you for joining the Apple Support communities with your questions!

• Needs to switch WLan activating / deactivating after each reboot on Equium A100-027

  Well my laptop worked fine for centuries, then recently each time the laptop restarts or turn on I have to turn off the WLAN switch and again each turn before the work of Wifi.

  He starts getting really annoying now; There seems to be a software bug / config problem, so I did a factory restore and even then still doesn't work does not correctly!

  Any ideas? It is driving my crazy now!

  OS is Vista home Premium BTW.

  Hello

  Try to update the WLan driver!
  In most cases, this helps!

  In addition I advise to use a tool to configure WLan as Intel ProSet utility for example (only if you use the Intel wireless network adapter)

  I use the Intel ProSet utility and I m very happy. My WiFi connects immediately after that the laptop has started.

• System/drawer/bar task icons are missing after each reboot

  Original title: why every time that I reboot, or start my computer some of my system/drawer/bar task icons are missing.

  Whenever I have to resart my computer there are always one or two icons always absent from the State system, as a time bar IDM is missing and a time MSE icon missing etc, I scan my computer with AVG, Avira and Avast, no viruses not found so far. SO why this continue to happen, is this Windows Bug or what? This never happened to me in Windows XP, the "Notification area icons" settings are fine, nothing wrong with them. Please help me solve this problem...
  Now the Drivermax icon is missing, but I put it to start at the start....
  

  Hi Furqan,

  Thanks for posting your query in Microsoft Community Forum.

  The issue may have been caused due to conflict of third party software. I suggest you to restart the computer in safe mode and perform the clean boot to avoid conflicts.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Also, try to rebuild your icon cache and check.

  (1) close all programs
  2) click Start, and then type CMD (without the quoatation marks) in the search programs and files engine
  (3) then right click on the CMD program that appears in the list, and then select: run as administrator
  4) access: C:\Users\\AppData\Local
  (at the prompt enter: CD /d %userprofile%\AppData\Local now, press the "Enter" key)
  (5) now delete the IconCache.db file as follows: DEL IconCache.db /ah and press the enter"" key.
  (6) close the command window.
  7-restart the computer.

  Important: Microsoft recommends the use of security that one software alone both. With the help of many will create conflicts between them.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.