Firefox cleans the exceptions list 'Allowed Sites - Installation of modules' after each reboot.

Similar Questions

• There are no programs listed in the exception list allow programs and features in the Windows on Windows 7 firewall

  I try to add a program to the Windows Firewall exceptions list. When I go to control configuration\systeme and Security\Windows Firewall\Allowed programs, I discovered that there were not all of the programs listed.

  If I click on the "Edit settings" button, it becomes grey and nothing happens. I am the Admin so I should have access to it. When I click on the button "Allow another program", any program, I am trying to add will give me an error message saying "firewall cannot add Windows ' [program]" to the list of exceptions.

  This has happened recently. I was able to add programs to the list of exceptions before.

  Thanks for the reply.

  Run a place upgrade to repair your operating system

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
  http://support.Microsoft.com/kb/2255099

  Note: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  Please follow these recommended steps and post if you still experience the problem.

• My desktop icons keep stepping back to the left side down after each reboot.

  Micons office keep movong

  I am running Win XP with Vista Upgrade. All of a sudden my desktop icons keep stepping back to the left side down after each reboot

  I am running Win XP with Vista Upgrade. All of a sudden my desktop icons keep stepping back to the left side down after each reboot

  Try this tutorial. It worked for me when I had Vista 32 bit. I used to have more than 150 shortcuts on deskops, and they tended to move 'by themselves' as you said. This tutorial below worked for me.

  http://www.howtogeek.com/HOWTO/Windows-Vista/save-and-restore-desktop-icon-layout-in-Windows-Vista/

  Note: the tutorial is done for Vista 32 bit.

  Is a 64-bit installation program which I have not tried. I can't guarantee that.

• How to clean the download list

  Hi all, my download list becomes large enough, looked in the help files and research community - no obvious way to clean mentioned.

  any suggestions?   Am running WIN 7 family PREMIUM SP1 64-BIT on a desktop computer.

  mg.

  When you say the download list, where exactly you're talking about, the web browser or your desktop folder?

  Is which web browser?

  If its Internet Explorer, press Ctrl + D on your keyboard

  Click to clear the list in the right corner of the window.

  You can also run Disk Cleanup and use it to remove the older downloads:

  How to free up disk space in Windows

• I tried to upgrade to Firefox Ver 28, but after each reboot it always shows the version 27.0.1

  I had been using Firefox Ver 26 and each time it restarts, there is a prompt to upgrade to version 28. I tried to install the upgrade and even after a reboot, continued the old version. Twelve, I uninstalled Firefox and installed new worm 27.0.1 when I check for the upgrade, it downloads a 15 MB file, but continues with worm 27.0.7 even after reboot. Am I missing something?

  1. Download the installer for the language you are interested in.
     • http://www.Mozilla.org/Firefox/all/
  2. Release of Firefox.
  3. Uninstall Firefox from the control panel. DO NOT tick the option on the deletion of your personal data and customizations.
  4. Run the installer downloaded previously.

• Code 80240016 has received after trying to download Service pack 1 updates, the download listed below will not load even after a computer restart, also I can not update my yahoo Messenger 10.

  Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86

  Download size: 6.8 to 26.6 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  The Microsoft .NET Framework 3.5 Service Pack 1 is a full cumulative update that contains many new features gradually based on .NET Framework 2.0, 3.0, 3.5 and includes the cumulative upkeep updates for .NET Framework 2.0 and .NET Framework 3.0 subcomponents. The .NET Framework 3.5 Family Update provides important application compatibility updates. This update is provided to you and under Windows Vista and Windows Server 2008 license terms.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=133335

  Help and Support:
  http://support.Microsoft.com

  http://support.Microsoft.com/kb/957307

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Having to reinstall the Flash after each reboot.

  Windows 7 - IE9 - Flash version 11.0.1.152 - Plugins and OS update - ESET Smart Securty 4

  I am prompted to install the new version of Flash after a reboot, then, it happens at least once a day.

  I have install Flash and he moved very well and works until the PC starts again.

  I tried some of the following:

  -Use the Adobe Flash uninstaller before installing

  -Using the stand-alone Installer

  -Checked filter ActiveX and it has been off... turning on the causes

  This same behavior, but the problem I have has nothing to do with the filter

  Not sure when this started, but the user does not have this problem until recently.

  I use ESET Smart Security 4. On all of our systems, and that his PC is the only

  one that has a problem. Need elements pretty hard until I took the trouble

  with uninstall ESET just to see if that would help.

  The part that is really strange... If I manage add on, when it is running,

  I see that the Flash player it and name of Adobe here and that it is enabled.

  After I reboot and go into the Add-ons Manager, Flash is still there and still

  activated, but it now says "Unknown" instead of "Adobe" and is therefore no longer

  other programs Adobe listed. But then, when I reinstall, which becomes

  'fixed' and now, Adobe still says. So it seems almost like a problem of IE9

  and maybe a problem of corruption. No known problems with the PC. I guess

  reload from PC to starting from scratch would fix the problem... at least I hope he would,

  but I'm not ready for the main surgery if there is an easier solution.

  The TakeOwnership script took care of the problem. I'm not 100% OK with it, because it seems to just move UAC and a decrease in security. But at least it now seems to work the way it is supposed to in IE9 and I still probably charge this PC from scratch at an opportune time. Thank you!

• How do I give the answers of my modem in a VI after each command that I send it so that I can see and document his actions?

  Hello colleagues LabVIEW'ers!

  I created a program that will interview a modem which is connected to the serial port on my pc.  I use the VISA starting functions by the serial port set it up and then I plugged into the function WRITE, then the BYTES to the PORT, then the READ function and finally the CLOSE function.  The problem statement is as follows:

  ~ How do they give answers of my modem in the VI after each command, I send it so I can see his actions and ultimately to report query out of it?

  Furthermore, I don't know if my commands syntax is correct.  Otherwise, I used a program called cygwin interface and a single command, I used is "ssh root@"ipaddress"[enter] This brings me to my modem connection control.  The cygwin command syntax would work with my labVIEW VI? If not, then how can I know what the command syntax to use to query my modem to LabVIEW?

  Additional information

  Modem - modem Satellite 'Evolution '.

  Version of LabVIEW - Professional 8.6.1

  Method of communication - Serial Port

  I appreciate all the assistance of those to receive, and I also hope that responses to this question are many who come through it.

  It seems that you have some apples and oranges here. Cygwin is a Linux for Windows environment. It gives you a bit of Linux look-and-feel in Windows. SSH is a secure, shell, which is a network protocol, not RS - 232. The serial port is a different interface. It may or may not have the same commands that you use on ssh - the manual will tell you that.

  Regarding the serial interface that you want to do, it looks like you want to just do something like what did the old LVTerm . You can give that VI a test to see if it does what you want.

• How can I block a site to be seen in Firefox? Internet Explorer allows a list of sites that are blocked for each category of site (Internet, confidence, etc.).

  I want to be able to block a site to be seen in Firefox. Internet Explorer allows a list of blocked sites in each of the categories - for example Internet, confidence, etc. It contains a generic function. How can I do this in Firefox?

  A more direct way to submit a feature suggestion is:

  Help menu > submit your comments

  However, in the early days the community add-on provided extensions such as NoScript and AdBlock Plus to build these features and refine their feedback from users. Unless there is a good reason to integrate these features into the core of the product, I don't think it will be a priority for the developers.

• Give root certificates and the 'green list' which sites they are allowed to check?

  More a feature than anything request: I think it would be a good idea to have a whitelist optional for which sites a certificate root is allowed to check. A common situation would be a company cert root - if the browser can be configured to doesn't have to be a CA for the sites within this company users (employees in this case) could be sure that the company was not spying on their browsing to other sites, while allowing them to create and revoke certificates for their own at will. (But I remember at least a story recently where that would have allowed the general public when a CA started allowing the fake sites.)

  Back to Firefox developers and requests can be made here:
  https://input.Mozilla.org/en-us/feedback

• How to clean the 'new' list from the Office?

  When I click on the desktop and select NEW, I get a list of options over which one I use nor recognize as useful. I cannot the options I use to be at the top? Can I remove the bitmap, Contact, Journal Document and Briefcase among others?  They obstruct and confuse the list.

  It would be nice if I use move upward again I use the option.

  This might help

  http://www.NirSoft.NET/utils/shell_menu_new.html

• I want to avoid the message "your plugins are not uptodate" appear after each update of the browserpage

  Yes, I know that I have an old iMac to 7 years with a CPU of the stone age.
  Yes, I know that the OS X 10.4 is exceeded.
  Yes, I'm aware that my version of Firefox is no longer supported.
  Yes, I know that some of the plug-ins are outdated.

  But the system works well enough for me, believe it or not, and on the hardware of newer versions do not work. So why call me whenever I update the browserpage these evidences? It's very boring, very unfriendly... (I used almost the words that should never be used in the public space).

  This way of people pushing to abandon something that is always perfectly feasible in my mind not correspond with values than Apple or Mozilla say to maintain, things like "focusing on the satisfaction of users" and "taking care of the environment.

  Please tell me how to disable these messages. Do not I suggest to install Ubuntu on my Mac. I'm about to do already.

  Thanks in advance, fellows.

  P.S. These bad people who might try to hack my machine do not need to know the plugins and versions are on this subject, so I won't list them here. If they took the time to know, they probably already know that I can give you more details.

  Hello quercus_petraea, enter "subject: config" in the location of the browser bar, confirm the information dialog box, then find the preference named "plugins.hide_infobar_for_outdated_plugin" and double click it to switch to 'true '.

  You can also use an addon like flashblock to only enable the flash plugin when you need it (like when you watch a video on youtube) to mitigate the risks while surfing the web.

  Firefox also will not support the ppc architecture longer, however if you want to use an up-to-date browser based on firefox you can switch to "tenfourfox" - on the side tilted, it supports any plugins: Firefox no longer works with Mac OS X 10.4 or PowerPC processors

• My list of carefully arranged search engines started back in alphabetical order, not after each reboot, but irregularly. No idea why this is happening and how can I stop it please?

  This started to happen out of the blue, not after the installation of a new add-on, nor change any settings that I can remember.

  You can (re) order yourself if you click the icon to search on the search bar engine and manage search engine opens.

  Which can happen if the database search.sqlite file was deleted and then recreated.
  
  You can make a backup copy of this file.
  
  Then you can restore it when it happens.

  Do you have a cleaning running software that could be the cause?

• during the reinstallation of vista it asks you to install windows vista after each reboot. Authorization?

  I am reinstalling vista. He asked several times language. Go to the same screen.

  Copy of files, extension files, updated installation up-to-date. Is this normall.

  Hello

  It does not repeat.

  Here's how the normal installation method:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  See you soon.

• my laptop had the error 03F0 twice but it still works after a reboot?

  OK, this happened twice and I'm starting to be scared. My laptop is a HP Pavilion dv6 equipped from Vista 32 bit about 2 years now. I had my laptop on the way 'sleep' and came back an hour later and it's on. When I opened it the screen was black and it is tellling me he couldn't find the hard drive. I turned it off and let it sit for a few minutes and he turned his back. He came and asked if I wanted to start normally or in safe mode so I chose normal. The computer started normally and I had no problem until today. I left there and came back about 40 minutes later and he said something, of not being able to find a boot file? I forgot to write exactly what he says. When I restarted this time I looked in the error logs and he had both two errors 03F0 dated yesterday when he came up the first time. Until now, today he was works well, but I'm a little worried because I have class work tomorrow and I would of course lose him. I keep my laptop on a cooling pad but it's still hot so I don't know if that has anything to do with it.

  Any help would be greatly appreciated!

  Hi Cyd Pryor,

  1. you remember to make changes to the computer, after which the issue started?

  I suggest you to make sure that all device drivers are updated:

  Updated a hardware driver that is not working properly

  Also, take a look at the following reference article link:

  How to fix error BlueScreen (STOP) that cause Windows Vista to shut down or restart unexpectedly (Title of ignore it)

  I hope this helps.