Computer failed to recognize 'Expert MMO Gaming Mouse Razer Naga' after each reboot.

Similar Questions

• My computer does not recognize my Wireless Mobile Mouse 3500 more

  I just bought this mouse about 1 month ago. It worked perfectly today until the connection has been lost suddenly while I was installing some drivers and programs... I tried out the USB and then place it into other usb ports, but that has not worked. I also tried to stop my computer and turn it back on then tried usb thereafter, but that did not work either. I don't think his damaged in anyway but maybe it has something to do with the connection bluetooth if it I really don't know...   Any help would be appreciated, thanks

  PS: when you choose a category for this question I have not found one for microsoft products...

  Hi, thank you for your answer, but I refreshed windows 8.1 until I received your answer and that solved the problem. Thank you once again.

• Accessory computer printer gone after each reboot, sometimes earlier

  Need to remove the printer and reinstall to get the connection to the printer via USB.  XP Pro - SP3 on Dell D600, about 1.5 Gig of RAM.   The printer is HP laserjet 1606dn.   Three sessions with HP Tech so far but the problem persists.   Printer itself works perfectly.   Have tried different cables, same result.  Device Manager shows no problems with the USB ports.

  This problem has arisen after that I was absent and installed an inkjet Lexmark for temporary use; does not occur during the first nine months of the use of this printer.  Have removed all traces localizable temporary printer, file, drivers and registry.   Thanks for your suggestions.

  Hi BobbieVA,

  1. The printer doesn't disappear after restarting the computer?
  2. Did you the latest changes on the computer?

  Method1

  I suggest you check out the link below and run the fixit tool available, check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  Method 2

  If the previous step fails then I would suggest that you check in Add/Remove programs for all software associated with the printer and remove it.

  See the link below and try the steps to connect the printer to USB connection.

  Install the product to a USB connection software in Windows

   

  Also install firmware update available on the HP site and check if it helps.

• my computer doesn't recognize my usb device and mouse

  MY COMPUTER DOESN'T RECOGNIZE THE DEVICE USB AND MOUSE IT NOT THERE NO COMMUNICATION BETWEEN THE COMPUTER AND THE MOUSE ALSO COMPUTER AND PORTABLE USB

  Thank you

  You must indicate what is the brand of mouse and the model? Whjat transponder type does the mouse have? The mouse has ever worked? Your laptop has 4 USB ports. No device works in one of the ports?

  The USB FLASH DRIVE is recognized if plug you it into a USB port on a different computer com?

• Microsoft 7 button Habu Laser Gaming mouse does not recognize

  Original title: 7Button of Microsoft Habu Laser Gaming Mouse

  I have windows 7 64 bit and mouse automatically installs as described but the razer Configurator will not detect the mouse and says to scan the usb ports, when I click on Yes for ever the scanner does not recognize it so I can't change the mouse settings.  Is there any fixes for this?  or I'm doing something wrong...

  Hi RKDeLozier,

  I suggest you follow the steps in the article and see if the problem still occurs.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Let us know if that helps.

• "Core security check failed" and the computer hang when I plug the USB mouse

  Hello

  Whenever I plug my mouse into the USB port, my computer crashes and gives me the error "Kernel Security Check Failure". I tried to uninstall the mouse driver, but it does not work. The mouse works fine after restarting the computer. Thank you for your help.

  Here is the link to the single minidump file, I managed to download (with other permissions issues):
  https://SkyDrive.live.com/redir?RESID=AB9340451E9919AC%21161

  Let me know if there is anything you need. Thank you.

  Hello

  The attached file of the DMP is the verification of bug KERNEL_SECURITY_CHECK_FAILURE (139) .

  This bug check indicates that the kernel has detected a critical data structure corruption.

  Error checking 139, {3, ffffd00022411350, ffffd000224112a8, 0}

  Parameter 1 error checking is 3, indicating that a LIST_ENTRY has been tampered. Code 3, LIST_ENTRY corruption. This type of bug control can be hard to track down and indicates an inconsistency introduced in a list to double bond (detected when an input list element is added or removed from the list).

  Cannot load the image NMgamingms.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for NMgamingms.sys
  ERROR: Module load completed but symbols can be loaded for NMgamingms.sys
  Probably caused by: NMgamingms.sys ( NMgamingms + 1cbb )

  ^^ Primax and/or optical mouse USB Dell driver (CHECK OEM - system manufacturer). This is a highly problematic device driver in Windows or 8.1 simply due to the fact that it's drivers did not support for 8/8.1, so block you on connect. The only thing you can do is to check the website of the manufacturer of the mouse and check for a driver 8/8.1.

  Kind regards

  Patrick

• Computer will not recognize Pro Duo or removable drives.

  Computer Vista will not read my Pro Duo chip, or it will show all removable drives except ROM USB where I have an optical mouse wirelesss connected (when I check my computer).  The import wizard shows only a USB where prior that he showed, f, g, h, etc.

  Thank you.

  Thank you for these two answers, unfortunately the first did not work, and the second deals with USB.  The computer will not recognize any location chip memory, they do not appear on the Import Wizard, or MY computer.  The only two drives that appear are drive C and drive J, which is where I have a wireless mouse hooked up.   Just before this problem I had... and still not... a bottom of screen message "one of the USB devices attached to this computer has malfunctioned... Click this message for more information."  The only connected usb is the mouse, and it works fine.  Solutions that deal with USB issues aren't really questions I have, except that in the future (if the problem remains) USB ports do not appear on my computer either.  Someone who has some said knowledgge I need to re - map the hard drive, or something?

  I really appreciate the time you people consume with it.  Any other ideas?

• Why my computer does not recognize the CD when inserted?

  I am trying to install a software on CD, but the computer does not recognize it.  I tried even my audio CD but they is also not recognize it.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Logitech MX 518 Optical Gaming Mouse

  I love my Logitech MX 518 Optical Gaming Mouse. But lately I noticed, it stops all of a sudden (I use Windows 7 64-bit home) and then I heard the sound of "beeboop" something of failing. After a second or two the mouse comes back to life. Then I checked my devices and under the Hardware tab, after my Logitech MX 518 Optical Gaming Mouse in the devices window, right-click, I noticed two entries. #1 (above) is: HID-compliant mouse and #2 (under the previous) is: Logitech HID-compliant G3/MX518 Optical Mouse.

  Is it possible that two (2) different drivers trying to run my mouse and contradictory? Mouse HID-compliant #1 (Top) is microsoft driver which I think could be just the version of the connector and play that he implemented to be compatible with my Microsoft Sidewinder X 6 keyboard. All in 2(Under the previous) # Logitech HID - compliant G3 / MX518 Optical Mouse uses the SetPoint drivers, I guess, Logitech.
  During games when my, the mouse freezes I am dead meat. I'm an avid gamer and this is killing me literally. Any thoughts would be welcome.

  The HID-compliant mouse's settings and default Windows mouse driver, and
  will the basic functions on all mice mouse, but should not be a problem
  (I also have peripheral Logi).

  If the sound you hear the sound you get when plug you something in
  a USB port, try another USB port and see if that helps.

  If that doesn't help, you could try to reinstall or update the Logitech SetPoint software.

  If the mouse just freezes in games you can disable V-sysnc, if it is enabled.

• Computer does not recognize the CD - RM when connect camera on Windows 7 Home Premium

  I have windows 7 Home Premium and just today my computer does not recognize my CD so I can add my camera to my computer. I worked on it for about 6 hours. looking everywhere and tried most everything, but it still doesn't work? Can you help me? Thank you..

  Try to use a DVD cleaning disc to clean the disc.  If this fails so that the reader has probably not and must be replaced.

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• Toshiba Gaming Mouse X 20-need of Drivers

  Hello

  I lost my CD and I can not find the default drivers on the Internet can some share with me or tell me where I can get them? I would like to continue to use this mouse, otherwise I would have to pay a new :(
  Model: Toshiba x 20 game

  Thanks in advance

  P.S. If necessary for admins/mods I can share the evidence that I bought the soap operas etc of the mouse mouse.

  Hey,.

  I checked Toshiba driver download page and for Toshiba Gaming Mouse X 20 no downloads are available :(

  I think you need to contact a service provider authorized in your country. Guys are able to order all the parts of Toshiba and it should be no problem for the guys to organize such a disk of driver for you. ON Toshiba page is a list of all the FSA:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Computer does not recognize Toshiba external 500G HDD - HARD drive

  Sorry, I use a translator, because all the illiterate

  A year and a half used the hard drive, and now the computer does not recognize it, the TV too.
  In Device Manager, it is there, but says "initialization error".

  What should do?
  Thanks for the replies

  You have partitions software installed on the laptop you?
  I guess that the HARD disk does not appear in windows Explorer, but common partition as the partition Wizard tool might be able to recognize the HARD drive.
  You can try to format the HARD disk and to create the new NTFS partition.

  Another solution:
  Usually, you can initialize the disk by DiskManagement.

  In disk management, right-click the disk you want to initialize and then click on initialize disk.
  In the dialog box initialize the disk, select the disk to initialize.
  You can choose to use the master boot record (MBR) or the style of partition GUID partition table (GPT).

  Once a disk is initialized, you can create partitions on it.
  After you create a partition, you can format the partition to create a filesystem (NTFS).

• My computer does not recognize my I - Phone 5s, why?

  My personal I-phone 5s went crazy about 3 weeks.

  • wouldn t blue tooth with my truck-telephone calls
  • connection of the cable with truck, 2 songs, radio and telephone game crashes
  • try to use SoundHound and it changes the mode on my XM radio
  • my computer does not recognize
  • yet my computer recognizes my I - Pad Air

  Did a reset - erase all content and settings;

  • There will be phone calls Bluetooth
  • yet to mess with the radio when you use SoundHound
  • computer doesn't always recognize it
  • Yet computer wife recognizes it?

  PC or Mac?
  When you say "does not recognize" what you want to do?

• My computer does not recognize my new printer correctly

  Well, it's on me.  I got a new printer for the College, a HP Photosmart C4680.  After you run Setup of the printer, I plugged the USB cable on my computer before actually running the pilot, and now my computer refuses to recognize the printer correctly.  I tried to uninstall the driver, restart the computer and the printer, and nothing seems to work.  Is it possible that I can fix or do I definitely made my totally useless printer?

  Hello

  USB cable may be questioned... but one thing... Try your printer with another system and see how it works...

  post the result...