Similar Questions

• How to see changes made to the file in Oracle EBS on browser

  Hello

  When I change any file such as Javascript or Base.htm or all the files on the EBS server and it does not reflect on browser until then I restart the server of the EBS. After restarting the server, it reflects the browser but the EBS server restart is not so easy. It takes more time to restart.

  If anyone knows another way to see the changes made to the file on the browser, then please reply to this post.

  Thank you very much

  Othmane

  Othmane,

  Take a look at the link below. It answers your question.

  http://www.appsdba.info/docs/oracle_apps/R12/HowToUpdateJavaCodeClass.PDF

  See also:

  Welcome to my Blogspot Oracle: Bounce Apache Server - Oracle Apps R12

  See you soon

  AJ

• Do a right mouse click on the name of the file causes Windows Explorer stop.

  Do a right mouse click on the name of the file causes Windows Explorer stop.

  The problem is sometimes caused by a third-party extension. ShellExView can be useful to see what shell extensions have been introduced in the Explorer. Lire read on this topic, then scroll down to download the x 86 (32-bit) or x 64 (64 - bit) version here near http://www.nirsoft.net/utils/shexview.html

  When you run it, click the column of company for sequence entries in alphabetical order. Suppose Microsoft entries are in good faith and focus on others. Is something listed that is useless or unknown? If so, select it and click the Red (on top left) task to turn it off. You can find it easier to disable them all and then reactivate (green area) one at a time and try to explore until the culprit is found.

• JAR: Changes made to the file packaged AP Project_1007.ini require restarting services by BDUS to enter into force?

  Hello

  I have a small doubt regarding the changes made on the packaged AP Project_1007.ini AP Imaging project file.

  I have a supplier search button in my auditor and I must make a few changes to the application of it. This provider search query is defined in section search provider OFR the AP packaged Project_1007.ini file.

  I added my additional condition in the where clause of the query to extract from sellers. But when I check in the WebVerifier, I don't see reflected.

  So in general, any changes made to packaged AP Project_1007.ini requires a restart of the services/auditor of WFR etc. of have reflected them?

  Let me know if I am not clear with my question.

  Kind regards

  Srikanth R

  Usually just stop and start the console RTS toured, but sometimes you need to restart the icons green funnel management service. A script is maintained in the project, no not the ini file, you must make sure that you save the project after adding or editing a script in designer of as it warns you not save changes

• List of copy of the files from Windows Explorer in the form of text in an application...

  Windows will always add something, or a menu item to copy a list of files in Windows Explorer in the form of text in an application?  I would like to run a DOS command (dir c: /s > c - example.txt) as I did years ago, but as I'm sure your aware, constantly been availible for years and your virtualization Windows MS-DOS command line is incompatible with my new computer... All solutions would be grately appreciated.

  Thank you
  Dave

  Hi Dave,.

  I have good news for you:

  There are two ways to do what you want:

  The first is the simplest and is already in Windows 7 (and Vista by the way):

  1. highlight one or more files that you want to know the way in Explorer.
  2. press and hold the SHIFT keyand right-click on one of the highlighted files.
  3. when the popup menu appears, click the entry in the path of the copy which appeared as if by magic, because you're now the SHIFT key.

  A slightly better method, IMO, but it takes a little extra work is to add an extension to the send menu to allow you to right-click on one or more files and choose send to-> Clipboard (as name).  This somehow me seems more practical, because I'm used to the way in which the rear PowerToys when.  Such an extension, which also adds a nice Panel to help you manage the menu send to, is a neat package small freeware called send to toys, by Gabriele Ponti, which can be downloaded here: http://www.gabrieleponti.com/software/index.html#sendtotoys

  A nice feature of the program send to toys, is that you can even have it put quotes around any path to file that contains white space.  Practice indeed!

  I hope this helps!

  -Christmas

  P.S., A command line similar to BACK tool is still (and always has been) available.  On the start menu, select: Start -> all programs -> Accessories -> command prompt.  Or you can just run: CMD.exe

• cannot open the file in windows Explorer

  Hello

  Double-click an InDesign file in Windows Explorer does not open the file

  He then shows the window of InDesign, but nothing opens

  Anyone know what this may be?

  2015 CC running on Windows 10 pro 64-bit

  Thank you
  David

  How to move the script to the user profile?

• Why Photoshop does not recognize changes made to the file in Lightroom?

  Hi, I'm new to Lightroom and used Photoshop for many years. I made many adjustments in a psd file in Lightroom, made sure to save metadata to the file... but when I open the file in Photoshop CS6, it reverts to the original version without changes to Lightroom. How can I get Photoshop to recognize the settings to the file?

  OK, what option you choose? You can choose open a copy with Lightroom adjustments...

• Changes made to the files displayed.

  I have changes to the files in a folder will appear if I close and then reopen the file.

  You can "Refresh" the list of folders by right-clicking and selecting Refresh or by pressing the F5 key.

  There are many discussions on the problems of Refresh but I have never seen one that provides a solution.  My PC sometimes starts to be updated manually but then starts to behave again later.  All with without apparent cause, or any attempt at rectification.

• The application's command line arguments get the path to the file in windows Explorer

  Hello

  I am trying to open a file with my labview application .exe, so I thought that windows was sending the file path double clicked in Explorer solutions in the form of argument, but all I get is the name of my exe file.

  

  Does anyone know how to set up windows or the application to get the double click path from the Explorer, which has the file extension has already been associated with my exe?

  Thank you!

  I'm not sure I understand, but I think you want your Labview program to open another file, as a file of perimeter?

  Have three basic choices.

  Hardcode the path with file name in your program http://zone.ni.com/reference/en-XX/help/371361K-01/glang/path_constant/

  Use the file open vi and for the user to select the file to open http://zone.ni.com/reference/en-XX/help/371361J-01/glang/file_dialog/

  Write your program to accept a http://digital.ni.com/public.nsf/allkb/17C3AD70493CE0208625666A00763364 command line argument

• Cannot move all the files as windows explore crashes - it happens every time when you use an external hard drive (several readers have been tested and work on other machines)

  I need to move files on my laptop, but windows crashes Explorer everytime I try this. This also applies when you use an alternative program to explore. It didn't happen last week but regularly spent the last six months. It is now that I need to migrate these files (mainly the images, but also the music and office documents).

  The error in the Event Viewer log States the following: start the application failing application Explorer.EXE, version 6.0.6002.18005, time stamp 0x49e01da5, failed module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, offset 0x02db07e0, process id 0 x 1650 error, time 0x01ca547fd1de6851.

  Thank you

  Make sure that the device is compatible with Vista, the Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx.

  If you need to get pilots to leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  You need to find the NAS device and the NICs in particular - but it would not hurt to look at all the when you're there.

  Go to start / Control Panel / Add Hardware and select the first option (recommended) to see if the system can detect the device.  If this does not work, choose the second and provide the information requested on the device.  You will be asked for drivers - have their practice.  Follow the prompts to install the device (NAS).  Make sure that it is plugged in and turned on when you do so, or he not be recognized.  It's the hard way of installing a hardware device, but your system obviously isn't automatically recognize it then do it manually. Here is a brief tutorial on how to do so: http://www.web-articles.info/e/a/title/Windows-Vista :-Running-the-Add-Hardware-Wizard /.

  I hope this helps.  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• What happens to changes made to the file during a p2v/v2v conversion?

  We are eager to do a V2V conversion on a file server that has a data partition on thick disk of provisioned to get slim with HDD resize.  I started an online conversion (vm under tension) and things are going very well, but what happens to files that are modified on the server while this process takes place?  Virtual machine changes source is written to the destination virtual machine towards the end of the conversion process?  Similar to when you migrate to another host/store data?

  I looked through the converter and the importer a few user guides, but I've seen no mention of this.  They were older documents, I found for esx 3.x.

  Someone at - it a document or advice on this?

  Thank you.

  5 converter has the ability to intercept any change during the P2V conversion of post synchronization. There are two types - a regular synchronization and let the live conversion or a final synchronization that complements the P2V.

• What could be the causes of CC 2015 gel after each edition/changes made to the files on the timeline?

  CPU - Intel Core i7-3770 CPU 3.40 GHZ 32 GB RAM

  Club 3D GTX 650 Ti

  Hi QSUF,

  Try this: turn off the Timelne display settings (key) > overview Composite at Trim

  Thank you
  Kevin

• Spontaneous change of "update" of the files in Windows Explorer

  When I got to work this morning I found that the "update" for all user files has been changed to date of yesterday at 13:14.

  I was working with my computer yesterday at this time there, but of course, was not able to open and edit all THE thousands of files of the user at the same time.

  Modification of files dates have not been modified or changed the dates of the program files

  After I discovered the anomaly I realize a virus to F-Secure Internet Security 2010, verification check found only a cookie program that has been quarantined

  What to do, I need to have the right dates on my files?

  P.S. I also made obvious, restarted the computer, which does not solve the problem

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot open files from Windows Explorer

  Original title:

  All the files in my Windows Explorer now say ((somethingEx:_Documents).library - ms) I need help. What can I do to fix this? I can't open all the files in Windows Explorer?

  Help please. I can't open all the files in Windows Explorer.

  Hello

  1. What is the exact error code?
  2. Have you made changes on the computer before this problem?

  Provide us a screenshot of the Explorer window to SkyDrive so that we can better understand the issue and therefore provide you with the troubleshooting steps.

  Download pictures and files

  http://Windows.Microsoft.com/en-us/SkyDrive/add-photos-files-FAQ

  Please come back with the information needed to get help.

• changes made to the Bundle.js file will disappear after the restart of the AAU

  Nice day
  
  I add javascript code in the file bundle.js in the following path: domain_home\ucm\cs\weblayout\resources\bundle.js .
  the changes are reflected on the University Complutense of MADRID fine, but once the server of the University Complutense of MADRID has reformulated the changes disappeared and the file back to back such; without my changes.
  
  the code that I want to add is:
  
  If ((typeof gamme! == 'undefined') & &!) Range.prototype.createContextualFragment) {}
  Range.prototype.createContextualFragment = {function (html)}
  Frag var = document.createDocumentFragment ();
  div var = document.createElement ('div');
  frag.appendChild (div);
  div.outerHTML = html;
  return of frag;
  };
  }
  
  I want to add because I have a javascript like this error: object does not support property or method 'createContextualFragment', this erro has occurred when the version of Internet Explorer is V.9. ; no javascript errors appear on the Version 8. When I add this piece of javascript in the bundle.js file, it the error disappeared and everything's fine, but as I said earlier after restart of the AAU extra javascript code is over and disappear from the file bundle.js.
  
  For this reason, I wanted to ask, is there a way so that my code and will remain even after reboot? Or is the file downloaded on the restart of a different path?
  
  Any Suggestions?

  It's actually quite simple to explain:

  - domain_home\ucm\cs\weblayout\resources is a directory that contains the version of the runtime resources
  -If you want to persist your changes, you will need to do it in a source directory. 11 g, there are two directories source; one of the standard components and the other for those custom. You must use the latter
  -in fact, if you create a custom component wizard, make your changes it and activate the component, you should be done. The only other thing that you should pay attention is the loadOrder of your resource setting - it should be higher applies.

  For more details, see http://docs.oracle.com/cd/E23943_01/doc.1111/e10807/part4_customize_comp.htm#sthref522