Novice question - shortening and then recording the smallest Clip under a new name
Brand new - is there an easy way to take a video file, I imported and set a new starting point and the end point, and then save it under a new name? The subject of my video requires a camera to film for a few minutes, but I only get action for 10 seconds. I want to quickly preview the throughout the video and make shorter copies and then begin to work with them on the timeline. So, is there an easy way to shorten a MP4 for example and then save it in the shorter size before you begin to import in the chronology and the PP?
Thank you
If you have a lot of work like this, where you need subitems in the sections named for specific purposes, you might consider using prelude, as it is designed expressly for this workflow. You can view clips, starting points, then tell him what you want to call and where to put it... and it will transcode your 'new' clip anywhere you want. There are a few programs out there 'in the wild' that can supposedly some formats and lop off just before & after an area chosen without re-encoding, but I don't know anything about this other that they exist.
Neil
Tags: Premiere
Similar Questions
-
* Original title: Partition
Hello
I got a new hard drive and I tried to create a new partition on it.
I declined 1 to using windows 7 and then I was give ruined a new disk name, but there say now that it is unallocated space and the top line is now black instead of blue and it won't let me give it a new name.
So, I now have to do to get this space as a new section of road.
Thanks for your help.
He said now there is unallocated space and the top line is now black instead of blue and it wont let me give it a new name.
You must format the partition until you can give it a name.
If that fails, use snippingtool.exe to create a snapshot of the Disk Manager. Save the snapshot on your desktop, and then attach it to your response.
-
How can I install Adobe Acrobat DC Windows XP? Can I download and install Adobe Acrobat XI Pro and then use the serial number of DC for the record?
Hi ckc60777449,
We're sorry, but the serial number would work only for Acrobat DC and not acrobat XI.
You will need to upgrade your operating system to windows 7 to install acrobat DC.
Let us know if you need additional assistance.
Concerning
Sarojini
-
I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?
It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.
-
I have a request that I wrote and have been use and distribute for awhile. The installer I created for this application is an additional installer to install a driver for the USB connection. The USB connection is actually a virtual COM Port. The problem is that the people who drafted modified driver setup the installation program itself. They used to have an installer that would check for 32-bit or 64-bit OS and then install the appropriate driver.
Now, they have two distinct installation programs: one for the other for 32-bit and 64-bit. They let the user know their OS and install the appropriate driver. I'd rather not have to rely on my users to do. From what I've seen the creater Installer provides that an executable to be run after the application installs.
Is it possible to have the installer of the application, check the type of OS and then run the correct executable file after installing my application? I think that I could write an Installer 'wrapper' that checks the type of operating system then executes the correct Installer. But I expect a better solution.
Thank you
JoeSo, I make it work!
The trick is to find a way to determine what type of OS you are using. The method I used was, indeed, read the environment variable. A buddy of mine sent me this link:
http://StackOverflow.com/questions/2401756/how-to-find-if-the-machine-is-32bit-or-64bit One of the phrases he bibliography the Processor_Architecture environment variable.
It seemed like a reasonable idea. So I started to research how read LV it environment variables turns out, you do it by reading a registry key. There is an example of LV on how to read a registry key. But I did not know where they are in the registry. So, I searched the Processor_Architecture registry. I found it in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment.
According to the article in the link, this value will already be x 86 for a 32 bit OS, or something with 64 inside. I just check the response for x 86 string. If it is, I just run the x 86 version of the driver Installer. Otherwise, I run the x 64 version.
It turned out to be as simple as that.
I hope this helps someone.
Joe
-
I uninstalled the touchsmart from hp on vista and then tried the system restore, dad will kill me, how can I get the touch screen to work again?
Hello
You have a specific question for HP, it may be better if you ask in the Forums of HP's Support.
See you soon.
-
It happened once before, but it somehow went away after I restarted my laptop. I restarted my laptop, this time, but it has not worked.
~*~
OK, so I just finished put a video together. It consists of a Hypercam 2 record (which means it's a .avi file), a PNG image, text and a song (which is a WMA file).
~*~
I save the file, and then click Publish Movie. Everything goes well until the last step where the video is actually published. The window made a break for a while before you receive the following message;
~*~
"Cannot complete the movie publish .
The video file cannot be published to the specified location. "Check that the publishing location is still available, that there is enough free space on the disk and then republish the movie again."
~*~
I know there are a lot of free space on the drive on my laptop (it's an Inspiron 1520), and that there is nothing wrong with any of my files. I tried to change places without result. It simply doesn't get it. It would be a great help to me if someone could tell me what is the problem :)
~*~
Thank you very much
Len
Microsoft Windows Movie Maker is not to let me publish my movies
Hello
I suggest you try the steps mentioned in the link given below.
Error message when you try to publish a movie using Windows Movie Maker in Windows Vista: "cannot complete publish movie.
http://support.Microsoft.com/kb/930435
Additional information:
Solve problems with publishing a movie to your computer
-
I was doing a reformat of the factory for windows vista on the laptop of my son (packard bell EasyNote LJ 65) when the battery is dead and the computer turned off. When I started it back up it gives the message: the computer restarted unexpectedly or encountered an unexpected error. Windows Setup cannot continue. To install Windows, click OK to restart the computer, and then restart the installation.
Everything I try, I get no further than this message, I don't know where to go to continue the installation. The computer does not see that the installation was not completed. I tried to enter the menu with F9 where I had to do the reformatting of the factory of windows but it will not give me the option to continue installation, it shows just the vista Windows, but when I click brings back me to the error message
Help, please!http://support.PackardBell.com/UK/
For questions about the recovery process, contact the manufacturer of the computer.
This isn't their recovery process, Microsoft.
See you soon. Mick Murphy - Microsoft partner
-
Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.
Original title: used to install Windows 7
Disconnect any other (additional) internal hard drives and external USB devices.
Look for any loose hard drive power or cables SATA, graphics card or other power cables.First run Memtest86 +:
It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
sticks are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152Hard drive test:
If you do not know your readers of the brand and model, try "Speccy",.
It provides information from the computer/system in detail:
OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
Note: Option RAM indicates number of slots, DRAM Timing.
Works your memory speed (frequency). The nominal frequency of your memory.
http://www.Piriform.com/SpeccyTest your player - create a Bootable CD:
Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.Test your drive with the car manufacture utility.
If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
(bootable CD) and check bad sectors.
SeaTools for information: http://www.seagate.com/support/downloads/seatools/
SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
SeaTools for DOS download:
http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htmHitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilitiesNotice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnosticAlso check Home Edition free Partition Wizard option "Test of disc surface":
http://www.partitionwizard.com/free-partition-manager.htmlJ W Stuart: http://www.pagestart.com
-
As a plug-in? I have problems with an editable IRS form. It gives me "Access denied" and then opens the file as an editable file. I was able to open the form in the library.
I found a few other questions on this forum who have remained unanswered. I found a site citing the problem for drive X - I use XI.
Change to drive XI. Perhaps the reader at the library had this as its default setting.
- In Adobe Reader, clear the check box enable the Mode protected at startup :
- If you have a PDF open, right-click the document, and then click Page Display Preferences.
- If you open Adobe Reader from the shortcut, click on Edit > Preferences.
- In the categories dialog box Preferences pane, click (enhanced) protection, and then clear the box enable the Mode protected at startup .
- Close and reopen Reader.
I have no idea if that setting has been changed in my XI player since I used this version exactly one year ago.
- In Adobe Reader, clear the check box enable the Mode protected at startup :
-
Can´t burn on a DVD. Process went up to 98% and then rejected the disc. Is the message "run time error: unknown exception. . Cannot burn to a folder either. Process finishes, but the folder is empty. The pc has 474 GB of space. The 61-minute video has some photos 1000 x 750 pixels in size; files (.m2ts and .mp4). using DVD - R. What can I do?
Rayo
Thanks for the reply.
Have been able to translate what I wrote in the numbered validation 1? There's a translate button in the bottom right of each message. Just don't combine English and Spanish in the post. Must there not having that one language in the post of the button translate work. Do not know why. But that's the way it seems to be.
Given that you can't burn your Timeline on disk or on the record, it seems that the problem is probably in the timeline content somewhere.
Please reread what I wrote in post numbered 1 to explore the contents of the timeline. If you did that? I will write more on that the next
If necessary.
If you have problems in communication, please let me know. I'll re - write my suggestions if necessary.
Thank you.
RTA
-
Possible to suspend a virtual machine, and then disconnect the SAN?
I decided to do an interview on a small environment ESX 3.5 and I was wondering if its possible to suspend a VM and then disconnnect the SAN to maintain SAN. If I record data suspends storage local would this work? Is it more fast and stop the virtual machine and the power save? There is the performance of 6 virtual machines on a single host with a single iSCSI SAN.
was wondering if its possible to suspend a VM and then disconnnect the SAN to maintain SAN.
A suspension is identical to a power off, it shows just the guest to Hibernate. So yes, it is safe.
Is it more fast and stop the virtual machine and the power save? There is the performance of 6 virtual machines on a single host with a single iSCSI SAN.
No its not faster, its more fast and more reliable to power off the virtual machine rather than suspend. If you need to follow the process and suspend its critical use, otherwise a scheduled interruption is better.
-
I use RemoterVNC on my iPhone to log remotely on my Mac at home so the children can use the computer without my go physically to the computer. (I admit, I am a bit lazy like that). However, lately when I launch RemoterVNC (on my iPhone), do the business of the connection, and then exit the application, the remote Mac began a disconnection. He also started doing this when I connect from my first Mac via screen sharing. It is a relatively recent behavior. Someone has an idea what setting I have (inadvertently) enabled to prevent the computer from automatically disconnect when the 'access app' is no longer active on the remote device?
Go to System Preferences > energy saving > computer sleep > drag it FOREVER to prevent disconnection of your mac.
Think simple.
-
When I click on a link in a new tab is no longer open in Firefox. Now, I have to copy the link, manually open a tab and then paste the link. Simply, this started happening a few days ago and I haven't changed anything in my settings. Can anyone help? Thank you
This problem may be caused by an extension that is not working properly.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
I suddenly have a 'Bing' screen when I connect on Firefox - and I want to get rid of it. The support section of Firefox says
1 "in the menu at the top of the Firefox window, seledt tools, and then select the Add-ons menu item." - but I don't see any 'menu item' tools, or much less modules.
2. "in the window modules, click the Extensions Panel"- but how to find the Modules window?
3. find the Bing and extended support to search toolbar in the list and then click on disable for each of them. ' - but what and where exactly is - this?At the top of the screen is only an icon of Yahoo to the left and to the right of it, a search box, 'Web search', 'My Apps,' Yellow Pages,""Weather","Updates"and"Skype ". to the right of the people, there is a green cross saying "add more applications. to your toolbar"and to the right of this one kind of gear shift looking icon saying"toolbar settings ".
So, in short, how can I get rid of the Bing screen and how to access these tools?
Thank you.Versions of Firefox 3.6 + have a feature to allow the user to hide the Menu bar.
Press the Alt key to temporarily show the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.
The F10 can also be used on most PCs to temporarily reveal the menu bar.
Maybe you are looking for
-
How can I get rid of the INTEGRATION area who has just started to appear?
He says he is for web developers, that I am not and do not intend to be. or enter the commands at the prompt. There is nothing there that says click here to never show this again.
-
I'm trying to figure out exactly what the protections on the cover of FF32 MITM. IE Https everywhere redundant or are they still covering other things?
-
Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.
-
Satellite C660 - key FN and wireless network detection no longer works
Hi people, As a result of a virus, I put my computer to its factory settings. I have however lost the use of the function fn (end?) of the keyboard since and therefore cannot control the lighting of the screen and so on via the F keys any longer. Als
-
envy20 HP touch smart H3Z91AA: DESKTOP/TOUCHSMART from HP ENVY 20 No. SOUND
HE DIDN'T THERE WAS NO SOUND WHEN I TRY TO WATCH YOU TUBE VIDEOS. PLEASE HELP TO SOLVE THIS PROBLEM OF HIS NO..