Now, formatted recovery partition cannot install Windows 8.

Similar Questions

• Back to the recovery partition after installing Windows 10

  Trying without much success to help a friend with a Lenovo ideacentre B310.

  He had apparently been does not work properly under its native operating system Windows 7 and the owner has tried the free update of Windows 10. The cmnputer has not since then start beyond the blue logo of the Windows 10 flag.

  I tried a reset by using the F11 key which got through the whole process of restoration and reinstallation of probably Windows 10 but then frozen 100%.

  I have since installed successfully from a WIN Pro 10 CD, but it's understandable without a free license has been applied as it was a clean install.

  What I want to know, it's the recovery on the still Partition PC contains the original OS? If this how I start and recover to factory condition of the PC having in mind that the PC is currently the trial version of WIN 10 with a limited number of days of use before a product key must be purchased.

  Data loss is not a problem, I just need to go back to factory State and then move on from that.

  Problem all sorted. I didn't realize that you could install the applicable version of REMPORTER 10 of the tool of creation of media these days and use the product key from the COA of WIN 7.

  I'm assuming that I come back to a working version of WIN 7 before I could then upgrade to a licensed version of WIN 10.

  Thanks for all the help.

• Cannot install windows 7, error: Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  Original title: Install windows 7 on GTP style partition

  Nice day

  I try to install windows 7 on my laptop but there is a massege
  Say cannot install windows on the selected drive cos it's GTP
  Partion of style, I was using before windows 8 but then format
  My hard drive please guide me on how to archive this because only through
  I'm really frastrated

  Hi Nnrmalata,

  1. you are trying to install 32-bit or 64-bit Windows 7?

  2. What is the brand and model of your computer?

  Boot from GPT is only supported for 64-bit of Windows 7 on UEFI-based systems.

  For more details, refer to this link:

  http://msdn.Microsoft.com/en-us/Windows/hardware/gg463525.aspx

  If your computer does not support UEFI, back up your important data to an external drive and delete all partitions on hard drives and create a new partition.

  (a) start from the Windows 7 DVD

  (b) click on install now

  (c) in the configuration screen, click Custom (Advanced)

  (d) click on drive Options

  (e) select the partitions to format

  (f) click on Format - this will erase EVERYTHING on this partition

  (g) create a new partition, and then select a partition to install Windows on.

  (h) follow the on-screen instructions and install Windows.

  Note: Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  You can check the link for reference:

  http://TechNet.Microsoft.com/en-us/library/dd799232 (WS.10) .aspx

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If above did not help, please refer to the steps in this link.

  Note: Backup your important data to an external drive

  Change a Table of Partition GUID drive on a main boot drive

  http://TechNet.Microsoft.com/en-us/library/cc725797.aspx

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  The Recovery Manager starts well. He correctly completed the following steps:
  1 format HDD

  2. copy the files from the CD to the drive. It copies all the 3 CD.

  Then he ask the driver (the 4th CD) CD. Once I have this CD, then after awhile I get messge below:

  Contact HP support

  In most cases, recover the hard disk will solve your problems.

  If your problem persists, you may have to contact HP support. Find details of support HO in the documentation of your PC.

  After that I see above meaage the only button I can click is "Finish". Once I click on finish, then in a minute, I get a message that "recovery completed successfully.

  The laptop restarts and displays the message on the screen "Bootmger" not found

  I called HP support and asked to run the hard drive and memory test and he succeeded.

  I can install windows on another CD I have with.

  But I can't install WIndows using the recovery CD, I received from HP. It's the 2nd CD series that I received these don't work or the other.

  I have two identical laptops. Tried installing on both and having the same problem on both.

  Can you please help with this.
  HP sends fake CDs?

  Kind regards

  Hello

  Here is another solution, you can try to see if you can get Windows 7 to install correctly.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Cannot install Windows on this disk selected disk.the has a MBR partition table. On EFI systems, windows can be installed only on GPT disks.

  Cannot install Windows on this disk selected disk.the has a MBR partition table.

  On EFI systems, windows can be installed only on GPT disks.

  When I try to install WS2008R2 in my turn lenovo G580 i5-3210 as a dual-boot option.

  Hello Pratap ReddyBh,

  As you try to install Windows Server 2008 R2, it would be better for you to ask your question in the TechNet Windows Server forums.
  Click on the link here for TechNet.

  Thank you

  Marilyn

• ThinkPad R60 cannot install Windows XP After erasing the HARD drive using the lenovo diagnostic utility

  WinXP pro Setup cannot find that any installed HARD disk so cannot install windows. Unfortunately after many attempts to use rescue and recovery to restore the factory settings and for some reason constantly default... After leaving another utility popped up giving me the opportunity to erase the HARD drive and so I did... After fact as well and all I had was a blank screen, no windows more or no matter what utility to reinstall windows, then I used my winxp pro installation CD, but the program installation would continue not after a certain point by saying that the installation did not find any HARD disk installed. followed by "ensure that any disk HARD r turned on and correctly connected, and that no matter what material associated drive configured correctly, this may involve running a manufacturer provided diagnostic or Setup program. Clearly it took me by surprise. What was supposed to be a cut to white erase and reinstall now me baffled and angry. Formats the HDD of the solution? If so why didn't not the usefulness of lenovo do... If not, what is the problem? Someone help pls

  Welcome to the forum!

  Go into the BIOS (F1 at startup), set the "compatible" SATA mode (NO AHCI), then press F10 to save and exit, and you should be all set.

  Good luck.

• Cannot install windows 8.1, very frustrated :/

  Hey, I have a HP Envy 4 1056-tx and it came with windows 7 Home premium that I currently use. Now. recently I tried to install windows 8.1 in it but it gives this message each time

  "Windows cannot be installed to this disk. The selected disk is a Table of the MBR Partition. On EFI systems, Windows cannot be installed to GPT.

  What does that mean?

  How can I solve this?

  Can I install win 8.1 in my laptop or not?

  Urgent required expert help.

  As soon as a moderator makes visible images, I'll be back on it for you.

  Legacy support can be in reference to inheritance or legacy usb 2.0 BIOS \1.1\1.0 devices. I don't know for certain until I see the pictures you have posted. If this means legacy usb devices, then the usb 3.0 ports will be active and you can use legacy ports. USB 3.0 ports have a SS label on them. This means superspeed.

• Cannot install Windows 8 on the replacement hard drive

  I got the replacement from Dell hard drive which he said would come with Windows 8 and pre-installed drivers. Well, I installed the hard drive and he said no. OS can be found. I didn't have a chance to make my own backup discs, but Dell sent a CD Windows 8 recovery media with the laptop and now with the replacement hard drive.

  When you try to install Windows 8 on the new hard drive, I get to the part where it tells me to choose a partition to install Windows 8 on and none of them will not let me. There are 5 to choose from and I don't know what to do to get past this. The largest partition either 5A about 934 GB of space left out of 1 TB, but as I said I can't choose it or one of the other ones for the installation.

  You just have to click on next, in any case, despite the message?  Otherwise:

  Start on the DVD of Windows 8, instead of install now, click repair your computer, Advanced Options, invites ... when it opens, type the following:

  DiskPart
  Select disk 0
  clean

  Then, try to install.

  The above will remove all the data partition and disk, allowing you to do a clean install on an empty drive (these scores are not required, and Windows will create its own partitions (two) he needs to install and run).

• Cannot install Windows 10 OSX Boot Camp 10.11.8

  I wonder if a solution was developed for the installation of 10 64-bit Windows in Boot Camp again.  I have a hard drive 3 TB of fusion that I partitioned (1 TB for Windows 10) via Boot Camp.   When I start the computer in Windows install (on thumb drive) and choose the partition to install Windows 10 in, I get a message that the partition is formatted in GPT not NTFS.  I click on the format button, but it loop back to that error message about TPG.

  I get no further than that.

  I left and I restarted the mac OSX, entered the windows to manually thinking NTFS partition partitioning regular and formatted program that it would solve the problem.

  When I rebooted on the thumb drive and restarted the Windows installation, I got the same error (INCORRECT FORMAT).

  I read about the solutions of terminal mode using Linux command, but hey, Boot Camp should take care of this without all this extra work that could potentially break the fuser unit I am correct?

  Or is this a Microsoft problem because the format function does not work in the Windows Installer?

  If anyone can help us with that, I would be greatly appreciated.

  See you soon.

  Jon

  See this document

  Use 10 Windows on your Mac with Boot Camp - Apple Support

  10.11.8?

• Cannot install Windows with BootCamp

  Hi guys!

  I have a Macbook Pro 15ich Early 2011 Intel Core i7 2 GHz 16 GB RAM disk 'Captain' with dual operating system, Samsung SSD 840 EVO drive, and HARD drive that came with the laptop is my auxiliary drive.

  I have two problems.

  (1) when I want to make the Boot Camp partition, I opened the app, and I do Boot Camp with the DVD options, I don ' t have the possibility of USB, I try to edit the info.plist is the administrator and I n ' have permission, I lost the permission when I arrived at the happy record.

  (2) I can't do the Boot Camp with USB I did a DVD with an external DVD drive. I can make the partition, but my problem comes when my Mac reboots to install W7 and W8 and typical black screen of MSDOS with the underscore "_" appears flashes all the time. I waited for minutes, hours, day and the laptop do not respond.

  What can I do?

  Kind regards
  Alex.

  riiKu wrote:

  (2) I can't do the Boot Camp with USB I did a DVD with an external DVD drive. I can make the partition, but my problem comes when my Mac reboots to install W7 and W8 and typical black screen of MSDOS with the underscore "_" appears flashes all the time. I waited for minutes, hours, day and the laptop do not respond.

  What can I do?

  Kind regards
  Alex.

  During the installation of Windows Setup started and you have the screen which shows your partitions and to choose one, you choose your Bootcamp partition and click on Format of below the list of partitions? You must leave the configuration format the Bootcamp in NTFS partition before installing Windows actually.

• Cannot install Windows 7 Professional 64 bit on HP Envy 4-1053TX (AVL)

  1. product name and the number: HP Envy 4-1053TX (B9K16PA #UUF)

  Windows 2 operating system installed 7 Home Premium 64-bit

  3 error message/symptom: blue screen * STOP: 0x0000007B (0FxFFFFF880009A9928, 0xFFFFFFFFC0000034, 0 x 000.., 0 x 000...)

  4. all changes made to your system until the problem occurred pre-installed Windows 7 Home Premium, trying to get at operating system level to Windows 7 Professional 64-bit using free license.

  5 cannot install Windows 7 Professional 64 bit which is open license. No player appears when Windows DVD/USB boot. Tried to install when Windows is running, appear a blue screen upon restart.

  Hello

  I see that you have a problem in the installation of new Windows USB port. It seems that your HDD was not detected, right? It's because your laptop uses a SATA HDD.

  what you need to do are:

  1. download the driver AHCI SATA website of intel. (just google it)

  2. copy the files (size 700 KB for 6 files) into the new USB

  3. reboot and install your laptop with win 7 (dvd/usb)

  4. by the time win 7 installation reached the drive to install (none detected), click load drivers.

  5. now load your other USB SATA drivers.

  6. then will show all disks in your system.

  7. continue with the installation process.

  hope this helps.

• Cannot install windows XP KB951847

  Cannot install windows XP KB951847.

  Fernando,

  KB951847 is an option, not the security update. Feel free to hide it.

  I. - stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > [OK]
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  II. - remove the contents of the download file:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > [OK]
  Open the download folder and delete its content
  Close the window.

  III. - open Internet Explore (only!) to http://windowsupdate.microsoft.com & run a CUSTOM scan. Uncheck the box/deselect KB951847 and hide ("don't show me this update"). -right click it once HIDE

  Tip: If an update of root certificates is listed in updates software optional (in the menu on the left), install it to take full advantage of enhanced Internet Explorer security, but do NOT install any other optional software , nor updates optional hardware , just hide them, too.

  I V. - start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > [OK]
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  `~`

  The current time and the date now in Baja California, Mexico

  09:19
  Saturday, August 24, 2013
  DST - 0700 UTC
   
  UTC/GMT is 16:19 Saturday, August 24, 2013
              
  Current weather conditions in San Felipe

  Sunny86 ° F / 30 ° C

• Error Microsoft FIXIT and cannot install Windows Media player

  Original title: microsoft solve this report: cannot install Windows Media Player 9 because the folder permissions used by W.M.Player need to be repaired. How can I do this?

  Windows xp pro, windows version - 5.1, arch / x 86 re

  Kostas,

  Thank you for the information required on this issue.
  
  Please provide the following information:
  
  Have you been able to solve the problem after following the methods?
  We would like to know the status of this problem now after following the proposed methods previously.
  We know with the results on this issue.

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Cannot install windows XP on the Satellite Pro A200-1N2

  Jin

  I have a Toshiba Satellite A200 - 1N2 PSAE3E and I don't want Vista on my laptop. I downgraded the bios to V5.30 but still cannot install windows xp and there is still no optin for SATA in the bios.

  Can someone help me?

  Thank you.

  Hello

  Did you install the SATA drivers first?
  You need this driver to recognize the HARD drive!

  You must download the Intel Matrix Storage Manager. You should find it on the page of the Toshiba driver or the Intel Web site.

  You must perform the installation of an external USB FDD drive using the F6 key during the installation of Win XP.