Now, my Pavilion dv6-3013 falls asleep when I close the top.

Similar Questions

• Pavilion dv6: Intel Centrino Wireless N2230 incompatible with the operating system Windows 10

  Following an upgrade to Windows 10 on a Pavilion dv6 notebook, functionity wireless is disabled because the Intel Centrino wireless N2230 is not supported for this OS.

  Is it possible to replace the WiFi card intel with a REALTEK RTL8188CE and enable wireless connectivity?

  I now have a card Realtek RLT 8188CE and installed the driver available from drivescape.com. Works on Windows 7 and Windows 10.

• I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? suggestion pls

  I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? Someone had this problem? Suggestions please...

  nidgp wrote:

  I left about 80 days of warranty. I'd give to repair?

  Absolutely, examined her!  There is some kind of hardware problem.

  Ciao.

• Hi I have a three month old g6 Pavilion and sometimes when I close the lid of the machine stops.

  When I close the lid on my g6 he died. When I restart it I get the message Windows does not stop correctly.

  I put the instruction for the lid to do nothing on the fence. This anomaly is intermittent.

  G6 laptop computer A5H00EA #ABU

  Windows 7

  64 bit

  I hope someone can help

  Hello

  Like this sound like a hardware problem, you should contact HP and arrange for the laptop repaired while you are still under warranty.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Closed Firefox tabs without giving me a warning, even if I have checked "notify me when I close the tabs.

  So far, Firefox always pop - up would be the "danger; you are about to close x number of tabs"window when I tried closing Firefox with several tabs open. Today, however, it just closes directly on my desktop, regardless of the number of tabs are open. "Warn me when I close the tabs" checked in my menu "Tab of Options", but this still does not work. I always get warned if trying to open too many tabs at once, but he refuses to tell me when I close my tabs.

  I tried checking and unchecking options, restart the computer, checked my plugins for exceeded those (the only potential problem is Shockwave Flash 17, but the other options to aide said Shockwave Flash 16 was the problem), sought user.js and went almost all the suggestions on the forums. Nothing's worked, and at this point I'm stumped.

  (Also, I'd rather have Firefox clear my history when I go out, so just having my restored tabs when I restart Firefox is not my preferred option).

  This problem started this afternoon; It was fine earlier in the day. This is due to an update of windows, an update of Firefox, or some strange virus?

  THE SECOND UPDATE: I managed to locate the problem. Tab Mix Plus add-on is apparently not compatible with the latest Firefox update. Turn it off seems to have solved the problem for now.

• How can I stop Firefox closes when I close the last window open?

  I had to get Windows 7 reloaded and my backup was corrupted (i.e., I couldn't use my custom Firefox.) So I downloaded the new Firefox and now it closes automatically when I close the last window opened. I prefer that Firefox stay open until I chose to close it. How to achieve this?

  Hello 1DKG, do you mean when you close the last open tab? If yes you can replace it as follows:
  enter on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.tabs.closeWindowWithLastTab. Double-click it and change its value to false.

• iPad will not lock when I close the case

  My iPad has locking when I close the case now, it won't.  The setting to lock is activated.  My case is compatible with the lock screen.  Any ideas on why this is happening?

  < image edited by host to remove personal information >

  It's a smart cover Pro iPad, and you tried activating / disabling the setting 'off' and 'on' and tried a soft-reset/reboot of the iPad? And you have access to a second iPad Pro you could try the cover on?

  (I asked the hosts to remove the image from your message as you remove your iCloud id it - it is not a good idea to post personal information on a public forum).

• External screen goes blank when I close the lid Satellite P100

  Hi all.
  I hope someone has an idea as to what is happening here.

  Sometimes I like to watch a dvd or use the center of the media on my HD TV. I use Windows Vista to make it.

  When I had XP installed, I close the lid of the laptop and watch them to my heart's content. Now with Vista, I need to have the lid open be able to watch on the external display. If I close to you then the external screen is empty, as if I unplugged the laptop.

  That makes me free! What worries me is burn-in screen, because the standby screen not turn on as I am watching video.

  Help! Someone! Anyone!

  AFAIK in Vista that you can use the same options as under WXp. check please supply option and you will find an option called when I close the lid. As option, choose no action.

  I think you should be able to close the lid while watching the movie on screen.

• Satellite 1800-314: when I close the lid it won't go in standby mode

  I hope someone can help.
  I recently had my Satellite 1800-314 (Windows XP) re-formatted and now when I close the lid he's going to sleep... the power light flashes orange, when I opened the lid still once, Windows stops and then restarts. I tried to install the Toshiba power settings, defining "when I close the lid, in standby mode", does not.

  Have uninstalled then Toshiba power settings and all the settings of ordinary power in the Panel of 'sleep', etc., but it REST did not return to standby mode.
  I'm tired now.
  Is there a simple solution that I'm missing?

  Grateful in advance for any help!

  Hello

  You know it's very important to install drivers in the correct order.
  The installation of common modules at the beginning is important because some drivers of Tosh need this application to work properly.
  If the energy saver has been installed on the operating system windows power settings will not work.
  Toshiba crash parameters the parameters of Microsoft.

  In addition, please check your BIOS preinstalled. Compare the version with the BIOS on the page. If your uses of the unit the old version, so try to update.
  But be careful. You must use the good BIOS and the right procedure upgrades.

• Satellite A200 AH3 stops instead of standby when I close the lid

  Hello

  I have a laptop Satellite A200 AH3. When I bought Windows Vista was preinstalled (I still drive recovery). When I closed the lid of the previous day (I mean the monitor turn off the HD, the cooling fan and all the rest). The light On / Off on the laptop turned to a flashing orange light.

  Then I opened the lid and Windows prompted me to the logon screen. This process occurred when the laptop starts on the battery, not when it is plugged. Everything was going fine.

  But I formatted the HD to install WIndows XP that I bought Windows vista seem to be too heavy for my laptop. So I installed Windows XP and the driver and the software available on the Toshiba site. Now when I close the lid, the Windows shut down very quickly (about5-6 seconds). However, it is a real firm. When I reopen it cover anything happen.

  Then I press the power button / stop and start Windows, normally (no screen saying that windows close annormally and no Safe Mode boot option). Even if I change the setting in the control panel/power Option or the Toshiba Power Saver, utility and I put them to sleep, he always make a stop down.

  How do I restore that?

  Hello!

  Have you downloaded the BIOS for Windows XP?
  For the Satellite A200, there are two versions available; one for XP and one for Vista.

  Also, make sure that you have the latest graphics card driver and keep your XP to date.

  Good bye

• Laptop shuts off and turns on when I close the lid

  Hi, I just bought a HP Pavilion 15-n253sv and I noticed that when I close the lid its turns off instead of getting in standby mode. Also when I stopped it, and then I close the lid it lights up. Its like the on off button. Is it a hardware problem that I must return the laptop? I checked out the settings and it is said that when the lid is closed it just goes to the standby mode. I have win 8.1.

  Hi Biliou,

  Welcome to the Forums of HP Support!

  If I understand you correctly, your computer shuts down when you close the lid, and if it is turned off and you close the lid it lights.  I think you are right to think it's a hardware problem. You can contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link to get help from your region number. Contact HP worldwide

  I hope that this helps, please let me know how it goes.

  Thank you and have a great day!

• Windows 8 do not sleep when I close the lid

  I just got the Elitebook 850 G1 and I put all the parameters of sleep when I close the lid and wake up when I open it. I checked the two settings in windows and in the BIOS and it's all good, but when I do actually, he does not wake up but restarts the computer instead. So when I was away typing on Word, fortunately I constantly save it but it's not back to where I left off. I thought it was one of the graphic drivers first, because he has dual graphics, intel and ati. He had a few problems with the ATI card, but I think that I fixed it. I am running windows 8.1 Pro.

  What can I do else?

  Edit:

  I tried changing the settings to hibernate instead, and what he gave me was a BSOD.  Video_dxgkrnl_fatal_error. I remember that what made the first time I tried to do it before when he was on the way 'sleep'. any suggestions?

  is not serious, I fixed it. It turns out that the new graphics driver intel was the culprit. I had to revert to a previous version. works perfectly now

• Takes too long to Hibernate when I close the lid - also the noise of random device when starting

  Hello guys.

  Since I wiped the machine, I had these two problems. When I close the lid, he used to go to bed right now, but now I see the light of sleep (and the power button), flash and flash, and then he goes to sleep.

  Upon awakening, he crosses the start of lenovo screen and resumption of the windows, then it asks for a password, before I used to open the lid and he was asking me the password immediately. I know it was going to sleep because I could hear the beep immediately when I closed and opened, but now it takes just too long.

  In addition, every time I have boot into windows or resume in a sleep state windows, I hear the sound of the device, like something being connected input/output. But there's nothing being plugged or back at the time. I can't to Device Manager fast enough to see who it is who is the cause.

  But all the drivers seem to be correct.

  Thanks in advance.

  Sam.

  EDIT: Also noticed, when the lid is closed, randomly the laptop turns off (beep) one then turns left.

  Weird.

  T420 model number: 4180-PR1 with operating system: Windows 7 Pro 64-bit

  Completely wiped the machine and reinstalled everything. No Acronis this time and work all fine.

• Illustrator crashes when I close the files - help!

  I installed Illustrator CC 2015 and have several problems:

  1. when I open files that nothing appears moreover argues (preview CMYK/GPU) after each file name

  2 - when I close the first file I opened it crashes every time there is any file.

  I'm on a PC running Windows 7

  I've uninstalled and reinstalled Illustrator without result.

  I have a cat of support, and it was a GPU issue. Once I unchecked performance GPU in my preferences of all has been fixed.  Thanks for all the help, I must get back to work now!

• When I close the lid on my MBP, it goes to "Standby" to "Hibernate" why?

  My MacBook Pro for six years had been working perfectly until about a month earlier, when he stopped to stay in Mode standby when I closed the lid.

  With the lid closed, initially, he goes to sleep, but after about 30 seconds, it goes into hibernation mode and to turn on again, I have to press the power button. I then get a grey screen and no use of the trackpad. Shortly after, the gray screen disappears and the machine works perfectly.

  The battery life is very good (68%), I have reset the SMC and I have not loaded the new software. The only thing I can think is that this started to occur at the time of the last update of Safari.

  Does anyone else have this problem?  Comments or suggestions are appreciated.  Thank you.

  Hello, Spring Lake Bob!

  Thank you for using communities Support from Apple. After reviewing your post, I understand that your MacBook Pro sleeps as expected when you close the lid. Instead, it goes into a hibernation mode that requires you to press the power button to interact with him again. I certainly understand wanting to make sure that the computer sleeps when it should wake up how it should. I'd be happy to help you!

  Get help with your situation, I would say using the article below the link to help isolate and solve the problem of sleep.

  If your Mac does not sleep or wake up when expected

  See you soon!