Now you see me... Now you don't have!

Similar Questions

• What happened to the button on the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? I use it all the time and it is not on FF4.

  What happened to the button on the left end of the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? You can look at the drop down window of pages and just choose whatever you want. I use it all the time and it is not on FF4. I want to go back to the old FF.

  If you right click on your back button, or click and hold down the mouse button, it will display the list. (I prefer a click-right, because sometimes my fingers slide when I try to click and hold)

• I bought a gift card a while and now I don't have the balance for her and when I try to buy I can not because I already bought it. Help, please

  I bought a gift card a while and now I don't have the balance for her and when I try to buy I can not because I already bought it. Help, please. If I can't do my 15 birthday money are wasted. He said as I already had a gift card in my account, but somehow everything is over now when I was not yet buy anything!

  A gift card is redeemable only once, it is useless to try to buy it back again.

  To see what, if any, balance you have left on the account you share you: see your credit balance - Apple Support iTunes

  To see what you bought on the account and therefore potentially used some/all of it: see your purchase history in iTunes on Mac or PC - Apple Support store

• Disabled user account control, when try to turn on the States of error message "you don't have the appropriate permissions to perform this action.

  Disabled user account control, when try to turn on the States of error message "you don't have the appropriate permissions to perform this action.

  What type of account selected for this account you upward?

  And your administrator account is now or not?

  go in Start > Control Panel > user accounts see what is written under your username.

• In Windows 7 RC, try to get a local domain, error ' you don't have permission to save in this location. Contact the administrator for approval. »

  I installed Windows 7 RC today and trying the route of a local domain in C:/Windows/System32/drivers/etc/hosts, but get an error when you try to save it with Notepad:

  "You don't have permission to save in this location. Contact the administrator for approval. »

  If I try to save it to my documents and then copy the file over I have another error:

  "You need give the administrator permission to copy to this folder."

  My account is the only account is already an administrator.

  How can I do this?

  See you soon.

  Right click on Notepad, and choose Run as administrator. Click on file, then open, then navigate to

  \Windows\system32\drivers\etc

  In the menu drop-down edit files text (*.txt) to all files (*. *)

  Open the hosts file and change now :-)

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/9446377a-42ab-4079-AFEC-e90a097060c0/

• Hi, I have vista Home Premeium, 32 bit, I got the flash player and now I don't have,

  Hi I have vista Home Premeium, 32 bit, I got the flash player and now I don't have, I installed the uninstall program and ran and reinstalled flash player, I've done this about flash player 6 times and SO I closed all the sercuity, but nothing helps. Help, please...

  Hello CalvinJones,

  Look at the post on the Adobe forums to see if the suggestion he help.
  http://forums.Adobe.com/message/3558717?TSTART=0

  Thank you

  Marilyn

• Error: "you don't have permission to access this folder. ' Click on continue having access to this folder continuously ".

  Original title: cannot access files on a folder on the drive hard usb after you have turned off sharing on a network.

  About a week and a half, I have set up my external hard drive usb to share on my network domestic as well as my brother could access some files on his laptop computer.  I've been playing with the security of some of the files on the hard drive and made sure that he could not access some of them.  I don't remember exactly what I did unfortunately.  After I had changed the security access, I was still able to access all files and my brother could not access it.  He got the files on the hard drive and I turned off my computer.  A few days later, I tried to access the files that I had limited and I was stuck.  When I went back in the drive to recover some files, I received an error "you don't have permission to access this folder.  Click on continue to have access to this folder permanently. "When I click on continue that another dialogue box comes up saying"you refused permission to access this folder.  To access this file you will need to use the Security tab. "I click on the link to Security tab and another dialog box appears asking"to continue, you must be an administrative user with permission to view this object's security properties.  Do you want to continue? "I'm obviously the administrator because I have this computer and I'm the only account on it.  From this point, I don't know what I do or what I'm supposed to do to recover my files.  I played a bit with a couple of things and I was able to get into certain folders, but its an extremely long process that I don't have the time for.  A side effect of which in fact so I can see the files, is that for any movie file, I try to access it, I get an error.  When I try to open it with Windows Media Player, I get the error "Windows Media Player cannot access the file.  The file may be in use (which is not the case), you won't have access to the computer where the file is stored (which is not supposed to because the computer on which it is stored my personal computer), or your proxy settings are may not be not correct (what?). "If I try to use another program like VLC media player, I get a similar problem where an error comes up saying that it was impossible to access the file.  I can see the file and see the properties but I am unable to actually see the film.  I can't move the file anywhere because I don't have administrative rights.  I'm under Windows 7 Ultimate, and if someone could help me please, that would be greatly appreciated.

  Hi Ridley,

  I see that this problem is old enough but you (or others) may have problems with it. Here's what I did:
  -Got to your hard drive and right click on the folder that is causing all the trouble.
  -Click on properties.
  -Click on the Security tab
  -Then click on advanced
  -You will see a window with a few user names. Now click on owner in the tabs above.
  -Click on edit, then select the user name you want to open the folder and don't forget to tick the box that says "Replace the owner of subcontainers and objects", then click on apply.
  A pop will come which says something like "You have replaced the property for the selected records" or something in this way. It worked for me and I hope this post is helpful for some people.
  Nina

• "You don't have permission to access to" a computer - Windows 7

  Now, I have 3 laptops in my house.  We're on Windows 7 (let's call it W7) and two are on Vista (we'll call V1 and V2).  On my Windows 7, I can connect (via the network - all PC use the same Linksys wireless router) v1 without problem and see shared files, but I can't connect to V2.  I get the message "you don't have permission to access \\PCName."  Now if I put in place a different id user on W7, I can access the V1 and V2.  I need to stick with my original if possible user id, because this is where I've already implemented a large number of programs that I need for work.

  Any ideas on what could be going on with my original user id?  He worked two weeks ago, although I added a few programs as I finally tried access V2.  Thank you!

  You can 'stick with your original user "; just add it to the machine of V2. See point c below for more details:

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• All trying to open my itunes, it says "itunes library drive is locked, or you don't have permission to write to this file.

  All trying to open my itunes, it says "itunes library drive is locked, or you don't have permission to write to this file. I tried already affecting my folder and subfolders and files read/write homegroup and still does not work. I DON'T want to NOT uninstall and reinstall and lose all my playlits - I currently have 250 of playlists (I'm a dance teacher) and begin to teach Friday. HOW can I fix it as soon as possible?

  Hello

  Please follow the steps.

  a. go to the iTunes folder. In Windows, the default location is: \username\Music\iTunes.
  b. right-click and select Properties.
  c. uncheck Read-only.
  d. click on apply. Click OK to change all subfolders. Click Ok.
  e. now check and see if you can open iTunes.

  I suggest also please contact iTunes for assistance support team.

  http://www.Apple.com/support/iTunes/

• I have a PC with Vista, I tried to install Windows XP, it was rejected, and now I don't have an operating system

  I have a PC with Vista, I tried to install Windows XP, it was rejected, and now I don't have an operating system

  Bruce,

  Do you remember if you wanted to do a new installation or had you partitioned your hard drive to install it in a dual boot with Vista?

  If you do not have a BONE now it sounds lik evous was the first choice that clears your current installation.

  You need to reinstall Vista from your original media to recover your system if this is the case.

  Unfortunately, if this is what you choose, you have lost all the data that was on your hard drive as well.

  Sorry to be the bearer of bad new possible.

  Rich

• System error message -"windows cannot access the specified device path or file. You don't have permission to access it.

  Hello

  Can help you. Had problem with safety messages and now I can't open any programs, get message "windows cannot access the specified device path or file. you don't have permission to access"how to restore the system to clear the message

  No sound as I wrote it. But I've sorted it by running Paretologic Data Recovery

  Thanks for your response

• Try to restore the data file, get error 'you don't have permission to save in this location"in Vista

  I am new to Windows Vista, but relatively competent in older versions. I installed the software on my new desktop computer. I am the only user on this computer and I have administrative rights. I installed the software in the Program Files directory. In the software, there is a folder for the working data file. I now try to 'restore' my data on this new computer file so that I can start working. I get an error message that says "you don't have permission to save in this location. Contact an administrator. "I have considered similar questions on this site and followed the advice to take possession of the file without success. I also created a new folder on the D drive, thinking maybe Vista I just wanted to keep C clean, but it gives me the same message. I can't save to the folder I created. Any advice?

  Program Files is a protected directory. If possible you create the working folder for the data in your user account instead. Is it possible in the options of the program the program in a directory of your user account? Or, if you think that any other user you may need to use this program, you could create the directory Public. MS - MVP - Elephant Boy computers - don't panic!

• where can I get a free anti-virus software, so that you don't have to pay

  where can I get free an antivirus program, you don't have to pay for cannot afford to buy one right now

  http://www.techsupportalert.com/best-free-anti-virus-software.htm

  http://www.AV-Comparatives.org/

  http://www.dslreports.com/Forum/r25776413-2011-anti-virus-poll

• error message "you don't have permission to open this file. Contact the file owner or administrator to get permission. " I am the administrator and the owner of the file.

  My XP computer crashed and now I have Windows 7 on a new PC.  I downloaded my files from an online backup and now when I try and open a Word document, for example, I get the error message "you don't have permission to open this file.  Contact the file owner or administrator to get permission. "  I am the administrator and the owner of the file. Help!  I am locked out of all my files!

  1. Right click on the folder that you want to take control and then click Properties.

  2. Click the Security tab, click Advanced, and then click the owner tab.

  3. Click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. Click on the name of the person you want to give to the property.

  5. If you want that person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.

  6. Click OK.

• I did my credit card has been removed and now I'm not a new card but now my membership has changed, as a free membership. So, I want to pay again. But now, I don't have a plan that has been used in the past. How can I do?

  I did my credit card has been removed, and now I make a new card.

  But now my membership has been changed as a free membership.

  So, I want to pay again.

  But now, I don't have a plan that has been used in the past.

  How can I do?

  I want a quick answer

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• I started downloading CS6 trial but was interrupted. Now I don't have CS6, but Adobe think I do

  I started downloading CS6 trial but was interrupted. Now I don't have CS6, but Adobe think I do

  If you follow the 7 steps, you can dl the trial here: http://prodesigntools.com/adobe-cs6-direct-download-links.html