NPS server - only Wired VLAN dynamic - Windows 7 - currently no available connection server
Hi all
I have deployed an NPS (Server 2008 R2) server with users added to security groups and configured VLAN DYNAMIC for wired connections (LAN) configured on the switch.
And the concept works fine if the user has already logged on. But if the new user or user ID are set not to cache the user ID won't be able to connect.
"Currently no available connection server ' for Windows 7 clients.
Changes in the local AREA NETWORK CONNECTION for as below for the settings of 802.1 X.
Specify the authentication mode: auth user or computer.
enable single sign on for this network
run immediately before the opening of the session.
Networks through VIRTUAL happen seamlessly once connected, but if the user of the switch or new user whose profile is not connected to the user gets "no server connection.
Objective: Users must be able to connect with their powers even without caching credentails.
Need suggestions or responses on that.
Thank you
Shashi Kumar G
Tags: Windows
Similar Questions
-
Windows 7 - there are currently no available connection server to process the logon request
Hello to all IT experts out there, good day.
Our company currently a problem recently:Problem: Impossible to connect to the pc when outside his functions with Active Directory NT profile/accountWhen: January 9, 2012 until todayThe frequency at which this happen: intermittentlyDescription of the problem/error: there is currently no available connection server to process the logon requestHow many affected system: 4-5 machines with the same laptop model (HP 8540w)O.S Windows 7 64-bit Enterprise and Windows 7 64-bit Enterprise Edition with SP1Action taken:Area return, group update policy, re - create a profile NT, update BIOS, OS reformatting/reinstall.Current solution: connect using the profile/account local and use it at home, back in office, reconnect the LAN and able to connect using NT profile/account and retry again at home.More information: our company have model HP range and never receive such problem reported except this model. There are a lot of employees using this model too but yet get affected, now here's some machine assigned to the breast in the same Department, but we have identified if all 3rd party software installed which make changes of protocol network or element (no) and still we could not find any same software installed on these machines.What I'm looking for?I need some experts advise to identify this regardless of whether a customer number or domain server problem, if the customer, what are the root cause and troubleshooting opportunities we should takeIf the server problem, I'll get assistance by opening a case to our server support team.Help, please. Thank you very much.One of the affected machine network news:C:\Windows\System32>ipconfig/allWindows IP configurationName of the host...: XXXXXXSuffix main Dns...: XXXXXX.comNode... type: hybridActive... IP routing: No.Active... proxy WINS: No.... DNS suffix search list: XXXXXX.comXXXXXX.comAdapter Ethernet Local Area Connection * 17:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: Juniper Network Connect virtual adapterPhysical address.... : 00-FF-10-A0-65-0ADHCP active...: YesAutoconfiguration enabled...: YesWireless network connection Wireless LAN adapter:The connection-specific DNS suffix. : XXXXX.com... Description: Intel Centrino Ultimate-N 6300 AGNPhysical address.... : 00-24-D7-BD-5B-E0DHCP active...: YesAutoconfiguration enabled...: YesAddress IPv6 local link...: fe80::79c9:372 has: 7a7c:e4dc % 15 (Preferred)IPv4 address...: 130.30.87.80 (Preferred)... Subnet mask: 255.255.248.0.Lease obtained...: Thursday, February 2, 2012 07:17:24End of the lease...: Friday, February 3, 2012 07:17:23... Default gateway. : 130.30.80.1.DHCP server...: 130.27.32.128DHCPv6 IOOKING...: 452994263DHCPv6 DUID customer...: 00-01-00-01-15-78-C2-8C-B4-99-BA-E9-86-5EDNS servers...: 130.27.32.128130.27.48.128Primary WINS server...: 130.27.152.52Secondary WINS server...: 130.29.152.153NetBIOS over TCP/IP...: enabledBluetooth network connection Ethernet card:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: Device Bluetooth (personal area network)Physical address.... : CC-52-AF-88-D9-31DHCP active...: YesAutoconfiguration enabled...: YesEthernet connection to the Local network card:The connection-specific DNS suffix. : XXXXX.com... Description: Intel 82577LM Gigabit network connectivityonPhysical address.... : B4-99-BA-E9-86-5EDHCP active...: YesAutoconfiguration enabled...: YesAddress IPv6 local link...: fe80::e8d1:38 ca: e868:9770% 12 (Preferred)IPv4 address...: 130.27.38.17 (Preferred)Subnet mask...Lease obtained...: Thursday, February 2, 2012 07:17:08End of the lease...: Thursday, February 9, 2012 07:17:10... Default gateway. : 130.27.36.1.DHCP server...: 130.27.32.128DHCPv6 IOOKING...: 330602938DHCPv6 DUID customer...: 00-01-00-01-15-78-C2-8C-B4-99-BA-E9-86-5EDNS servers...: 130.27.32.128130.27.48.128Primary WINS server...: 130.27.152.52Secondary WINS server...: 130.29.152.153NetBIOS over TCP/IP...: enabledCard tunnel Local Area Connection * 20:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: #5 Microsoft 6to4 cardPhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard adapt 6TO4 tunnel:State of the media.... : Media disconnectedThe connection-specific DNS suffix. :... Description: Microsoft 6to4 cardPhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 12:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: Microsoft Teredo Tunneling adapterPhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 17:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: Microsoft 6to4 adapt #3Physical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 19:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: #4 Microsoft 6to4 cardPhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 22:The connection-specific DNS suffix. : XXXXX.com... Description: #7 Microsoft 6to4 cardPhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesIPv6 address: 2002:821 b: 2611:821 b: 2611 (Preferred)IPv6 address: 2002:821e:5750:821e:5750 (Preferred)... Default gateway. : 2002:c058:6301:c058:6301DNS servers.... : 130.27.32.128130.27.48.128NetBIOS over TCP/IP...: disabledCard tunnel Local Area Connection * 21:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: #6 Microsoft 6to4 cardPhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesReusable Microsoft 6To4 tunnel map:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: Microsoft 6to4 adapt #2Physical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesTunnel adapter isatap. {251B844B-9080-4D91-A33C-D644B29D87A5}:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: Adapter Microsoft ISATAP #2Physical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesTunnel adapter isatap. {E7AF5244-8866-4417-BCD4-8A7E8CCBF18F}:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: Microsoft ISATAP adapterPhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesTunnel adapter ISATAP.SCS.Agilent.com:State of the media...: Media disconnectedThe connection-specific DNS suffix. : XXXXX.com... Description: Adapter Microsoft ISATAP #3Physical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesPost in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
Why am I not able to connect to my server (Windows Server 2008 R2 Standard)? My error is goes something like this... Currently, there are no available connection server to process the logon request.
I'm sitting in front of the server and I can not connect to it...:)Thank you for visiting the Microsoft answers community.
The question you have posted is related to Windows Server and would be better suited in the MS TechNet Windows Server Forum. Please visit this link to find a community that will provide the support you want.
-
There are currently no available connection server
I installed windows 2008 Server. I did so the domain controller. Then I downloaded the microsoft.com windows updates all updates downloaded and installed successfully, but after the installation of updates cumputer restarted and when login screen lights up and that I have provided the password. strategies of Windows me error "there are currently no server connection.
Update Befire, he worked everything is OK
Please help meMahmood
I'm sorry, but this is the Forum for Windows Vista update.
http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx
Above is the link for 2008 Server Forums.
They will help.
See you soon. Mick Murphy - Microsoft partner
-
authetication affectedly 802.1 x Vlan dynamic by a radius server
Hello
At school, I want to start using authentication for 802. 1 x affectedly Vlan dynamic by Radius Windows Server 2012R2.
When a student logs in, I want it to be placed in the Vlan 'Students', when an Administrative employee logs in, I want it to be placed in the vlan 'Administrative' and when the client is unknown, I want to place in the Vlan "invited".
I have several SG200 switches and I have everything configured as described in the administrative guide but I can't make it work as you want.
What does not work:
-If the client is authorized, the switch enters the State "authorized". (until someone connects to the domain with this customer)
-When a user opens a session which is part of the administrative staff, the switch becomes 'authorized' and when a student logs in, it turns into "unauthorized."So far so good.
But what does not work:
-It does not have the administrative employee in the Vlan 'Administrative', it allows the port of the switch comes, but he leaves in the vlan by default 1.
-I can't find the VLAN comments.Any help would be appreciated.
Hi Wouter,
Yes you are right, 200 series doesn't support DVA. Only 300 or 500 have this level of the interface settings.
Aleksandra
-
Windows Server 2012 Release Candidate, WiFi n, the NPS server. Error 0x800f0922
I can't add the NPS server to the roll, Windows Server 2012 Release Candidate, features no. WiFi connection. I get the error 0x800f0922.
Hello
I would like to inform you that this Site is for support to the consumer.
I would ask you to send the query to Technet.
See the link below for further assistance;
-
Assignment of VLAN dynamic RADIUS ACS 5.2 Server with NAC
We are trying to reduce the number of ssid in our network wireless with assignment of vlan dynamic with the acs. Our problem is that we use Cisco NAC so with assignments of vlan dynamic user will be checked by the NAC. Agent of Cisco sometimes pop up and do nothing to do or give a message cannot locate server. We even got an OOB error. Someone used a VLAN dynamics with the acs and the NAC successfully? The NAC is Out of Band
Hello
I supported oob nac and wireless and your efforts to make the dynamic assignment of VLANs will not work because of the way in which him vlan quarantine and access are mapped to this ssid.
This work in in-band mode, however your design. This WLAN key needs to exist because the Manager sends the snmp trap to move the client from quarantine access.
Just as a note, I'm sure you are aware is that ISE is the evolution of the acs and the NAC. Basically this your solution to reduce the skates and posturing of the customers.
Sent by Cisco Support technique iPad App
-
Assignment of VLAN dynamic by using the WC7520 controller
Hello
I use a few AP WNDAP360 for awhile and consider adding a WC7520 controller.
However, I would use an assignment VLAN dynamic using a RADIUS server.
Whereas it is possible with the 360 in stand-alone mode, it is clear to me if this can be done by using the WC7520 controller.
The (obsolete?) reference manual said not a Word to this topic...
Is there someone to share experiences with the 7520 and this type of configuration?
Hello
Thanks for your help!
After reading the articles you suggested, I was still unable to find a definitive answer, so I asked pre-sales support and quickly received the following response from Tech Support level 2:
There was a feature request to ask to implement, but it looks like it will not be implemented for the WC7520. Also, there is a feature request for the WC7600 which looks more promising, but still not possible currently and is not guaranteed to be implemented.
In short: no, it is not possible, will not be on the WC7520 and could become so on the WC7600.
Too bad, and it makes the much less interesting WC7520 for me, but at least it clearly quickly.
-
Windows 7 workstation loses the connection with the Server 2008 "
Server running Microsoft SBS 2008 Standard. Second location is the use of Remote Desktop. These workstations are very good. Only the workstation in the same place loses the connection periodically. Workstation can reconnect, but never know when it will drop. The user has to go to the remote location to know that the work will not be interrupted.
This particular configuration has worked very well for a few months. Long story short about 2 weeks after main tech (which has implemented) is deceased in August 2010, there was a major issue. No one is really sure of what it is, but everything is back up and running just now lovely annoying drop except for this connection.
I'm scheduled to go on Tuesday. This is a seasonal business and people we're patient but kind of necessity to deal with this finally. I am pretty well convinced that this is not the Peachtree program causing the problem. However, the error indicates that Peachtree is not installed on the server, and yet it is, obviously. That is why we believe that the connection has been interrupted.
All this makes sense? Someone knows the effects of any automatic updates of end of August 2010, which may have caused a situation like this? I know that currently they don't dare to update Java or something does not work well. Thought, that you may know of something that happened at that time that could cause this.
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/
-
Assignment of VLAN dynamic of the Web authentication
In a firmware WLC 4402 v.5.2.157 is possible to assign users to one VLAN dynamic based on the RADIUS response received from ACS?
Yes and no. You can do for a WLAN 802.1 x internal, that the customer does not get an IP address, until they have completed the authentication process. To do this, you use 64/65/81, 64 802, 65 VLAN and to 81 use the name of the interface, not the number VLAN. you will also need to make sure you have AAA Overrided activated under the WLAN.
If, as is said for Web authentication, the answer is no. The client has an IP address before being validated by the AAA server.
HTH,
Steve
-
Microsoft wired keyboard 500 & Windows 7 x 64
I use a microsoft wired keyboard with windows 7 x 64. The software/driver provided by microsoft for this configuration (ITPx64_1033_7.00.260.0) does not work correctly. The software is supposed to programs other than the default value to allow you to reasign dedicated keyboard keys (mail, calculator, etc.). However, most of them have no effect. Any ideas?
Hi pthubbard,
Welcome to the Microsoft Answers Forum!
Uninstall and reinstall the driver software and check if that helps. Try the steps listed in the links below and check, if that helps:
Troubleshoot wired keyboards that do not or only the category wrong characters:
http://support.Microsoft.com/kb/258826
Troubleshoot failures of keyboard shortcuts using three or more keys on the Microsoft keyboards: http://support.microsoft.com/kb/909528
Thank you, and in what concerns:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
new links will be open in a tab, only in the main window
with firefox 21, links will not open a new tab, only in the main window. I put the option of opening tab, but it still does not work
The setting in Firefox/tools > Options > tabs: "new pages should be opened in ': 'a new tab/window' is for links that specify a target window to open the link.
This option allows to divert these links into a new tab instead of a new window.
Links that do not specify a target will open in the current tab if it does not change JavaScript.
If this is not the case then you can have an extension interfere.
For links that do not specify a target, use a middle click or hold down the Ctrl key and click the link or use the context menu to open the link in a new tab or window.
This applies to the bookmarks and other links so that you can click the view Image in the context menu of an image or click on the address bar to get a new tab with this link, the Reload button.
Click on a JavaScript link to avoid having a blank tab. -
Hello
I upgraded my PC and have my touchpad does not work.
Looking for new drivers for Windows 10, but there is no available drivers for Windows 10. Can only find drivers for Windows 8.1
Please advice how I can solve my problem...
These drivers are also for ACER V3 772 G?
Because I can not find windows 10 drivers for ACER V3 772 G
-
Windows 7 64 bit Pro connects to SQL Server on the Windows Server 2008 R2 Standard domain
I put upgraded to Windows 7 Professional computers to Windows XP Professional, but I have a problem with getting one of software programs management of stock that allows us to connect to our SQL Server 2008 R2 Standard Windows on new Windows 7 computers.
Our computers are connected to a domain, and therefore SQL Server. Computers Windows XP allows each user to standard domain to connect and to connect to SQL Server via the stock management software.
But on the standard domain of Windows 7 Pro computer users unable to connect to SQL Server, but administrator accounts of area on the same Windows 7 Pro computers can connect to SQL Server through the inventory control program.
I have set up the alias of the server, the server name and port number via the SQL Server Client Network utility (
cliconfg.exe
) so I know this isn't the problem because it works when I'm logged on as a domain administrator.There seems to be something to do with permissions of user domain and Windows 7 Pro. There seems to be a change from Windows XP Pro to Windows 7 Pro that does not allow standard domain users to connect to a SQL Server. But I can't find anything about and cannot practice how to solve this problem, except to make all users, domain administrators that is obviously not a good thing to do. So basically I think I need to create a group policy that allows users to connect to SQL Server, but I have no experience in doing this and don't know where to start.
Thank you for all that you guys help and I hope someone can give me the solution to this problem.
This issue is beyond the scope of this site and must be placed on Technet or MSDN
-
Having Windows 7 Service Pack 1. Had to uninstall Java/Pogo games but when you try to reinstall Java a window pops up saying, "this action is only valid for products that are currently installed.
I used Revo UN-install, but when I checked the Panel he showed Java with a folder instead of the Java icon. I tried to find what file or folder, it is the case, find nothing. Please help if you can.
Thank you.
This sounds like your problem? - http://forums.whatthetech.com/index.php?showtopic=104537&hl=This+action+only+valid+products+that+currently+installed+Windows
It lists the reg keys his looking, then you might check to see if you put them before doing anything.
Back up your registry and set a restore point before taking any action - assuming that is your problem.
Also, if you download and run the file, AV check it before running it - just in case.
NOTE: the above was found by google, I have not tried that I have not had the error. I can't say if it works or not.
PS - Also, FYI, while the research I found this http://support.microsoft.com/kb/893048 , but it seems specific to XP - SP2. Don't know if there is an equivalent W7.
Maybe you are looking for
-
Functions of minimization of LVs can minimize a function with a summary in it?
Hi all I'm trying to minimize the U - X, where U is an array of n points of measured data and X = f (U), a function of sum of n points of 7 variables: I made effective Subvi to calculate this function and normally would solve it using an Amoeba as ap
-
Hi, I'm wanting to add text to a form of jpeg image. I can use the link in the menu 'A' to do it now, but I wanted to change the font, etc. I read the content of help on the paint to see if there was a way to change the police etc & he says under th
-
How can I move all the information of the computer without having to hit F1 or F2 at startup and go directly to the windows desktop in Windows XP
-
Hi, I have recently updated my JOINT-2 5.0 (2) to 6.0 E1 (4A). But I couldn't access it during the IDM. Has anyone ever encountered this problem before? I was wondering if I missed something or I need to patch anything. Thanks in advance. Kind regard
-
List of Flash components not filling without setting a breakpoint
Hey there,right now I'm once more.Still works on the same program, but with a different problem this time.When I run the program I want to automatically load data from a txt in a list of flash components.However for some reason any it only works if I