NSX Distributed Firewall - can you firewall connected vNIC distributed to port groups

Similar Questions

• Can you change what core is vmotion ports without going into maintenance mode?

  If you have a host running, with a vswitch standard, can you change what port kernel manages vMotion without putting it in maintenance mode?

  What is happening is that we have a number of blades, all running vSphere 5.1.  Each host has a unique vSwitch with multiple groups of ports and a dedicated port vmkernal for vmotion and another dedicated one for the management network.  We use a VLan to separate the vmotion network.

  Our networking group will do a reconfiguration that will change the VLan dedicated for the vmotion.  What I would like to check the vmotion network management for each host, clear the check box on the Group of ports "vmotion".  The new vmotion VLAN is set up by the network, and then I go back and make the changes on each slide so that the "vmotion" is now enabled and remove the functions of vmotion for the management port.

  I know that it is not recommended to run the vmotion traffic on the management port network, but it will only be short term (probably a week or two).  My biggest concern is whether I can make changes 'live' without affecting the machines running.

  In a note related, if a host loses contact with other hosts on the network vmotion, which will pose a problem (in addition to not being able to vmotion)?  Will be the loss of connectivity on only the port of vmotion cause any kind of response of isolation, failover, etc.. ?

  Basically, you can modify most of the settings of network - including vMotion - without affecting the virtual machine. When you say that they reconfigure VLANS, do you know how long it will take and if the VLAN current will be available during this time? In this case, you would not have to implement no work around, but just update the VLAN groups of vMotion ESXi host ports.

  André

  PS: about your question "will be the loss of connectivity on only the port of vmotion cause any kind of response of isolation, failover, etc..?

  No, it's the management network that is used for HA, so everything what he let go is vMotion/DRS.

• Consolidation and failover for the uplink on the Distributed switch port group

  Hello

  I have a problem with the implementation of a distributed switch, and I don't know I'm missing something!

  I have a few guests with 4 of each physical cards. On the host eash I configured 2 virtual switches (say A and B), with 2 physical network by vSwitch using etherchannel adapter. Everything works fine for etherchannel and route based on the hash of the IP for the latter.

  Recently, I decided to create two distributed switches and move the respective physical ports of virtual switches to this distributed switches. Once again, I want to configure etherchannel and route based on the hash of the IP. But when I open the settings for the uplink port group, aggregation and failover policies are grayed out and cannot be changed. Apparently they inherit configuration also but I don't know where!

  Chantal says:

  Once again, I want to configure etherchannel and route based on the hash of the IP. But when I open the settings for the uplink port group, aggregation and failover policies are grayed out and cannot be changed. Apparently they inherit configuration also but I don't know where!

  You must set the card NIC teaming policy on trade in reality and not on the uplink group more expected.

• Can you simultaneously connect Officejet Pro 8600 wired or wireless?

  I currently have an Officejet Pro 8600 printer and it worked flawlessly when connected wireless over the last few months until yesterday, when all of a sudden could not be connected to my office.  (Note: my wife's cell phone still print on it without problem).  I'm going down in support information in an attempt to return to its former State, running via the wireless, but I was wondering if this printer can be connected both cables (on the desktop) AND wireless (for laptop) at the same time?  If so, how is this dual connection method performed?  Thank you.

  Thanks for your help Jamieson. This perfectl worked.

• Set a vm network distributed port group

  Try to set up the network to a virtual computer to a port group distributed.  There seems to be a quick and easy way to do this - you need a small code snippet that does?

  I was thinking something like this (u_vm is a Vc:VirtualMachine)

  NIC var = new VcVirtualEthernetCardNetworkBackingInfo();

  nic.deviceName = "VGA-myportgroup";

  spec var = new VcVirtualDeviceConfigSpec();

  for each (var edge in u_vm.config.hardware.device)

  {

  If (device.deviceInfo.label is "Network adapter 1")

  {

  Spec.Device = device;

  Spec.Operation = VcVirtualDeviceConfigSpecOperation.edit;

  Spec.Device.backing = nic;

  }

  }

  u_vm.reconfigVM_Task (spec);

  But as the bombs with this error:

  [13:20:42.303 2015-06-23] [I] can't convert the com.vmware.vim.vi4.VirtualDeviceConfigSpec@ffb8e5cd in com.vmware.vim.vi4.VirtualMachineConfigSpec (workflow: meh / Scriptable task (item1) #17)

  What about using the library for this workflow?

  \Library\vCenter\Networking\Distributed Virtual port Group\Connect VM number NIC to distributed virtual port group

• I try to install the Kodak ESP C310 printer, but it is said that a firewall is not blocking the installation. Can you help me?

  I try to install the Kodak ESP C310 printer, but it is said that a firewall is not blocking the installation. Can you help me? I use windows XP. I tried port 5353 and this is what allows to Hello.

  You can check this article, but it's about Firefox itself do not have access.

  http://KB.mozillazine.org/firewalls

  Could you give the exact wording and punctuation of the message and try Googling yourself - when google you do not without importance and punctuation, words of group who are always together as original in quotation marks or hyphens message that google will look for these words together in that order.

• noticed the inscription "fg739p.exe" block as authorized through my firewall program is turned on. Can you tell me if this program is safe?

  Original title: Windows Firewall

  While checking the windows firewall, I noticed the inscription "fg739p.exe" block as authorized through my firewall program is turned on. Can you tell me if this program is safe? Remove from my allowed list will affect my computers performance? Should it be there?

  While checking the windows firewall, I noticed the inscription "fg739p.exe" block as authorized through my firewall program is turned on. Can you tell me if this program is safe? Remove from my allowed list will affect my computers performance? Should it be there?

  You can search for the file? If so try to download at this https://www.virustotal.com/

• Can you watch a movie download rented without an internet connection?

  Can you watch a movie download rented without an internet connection?

  If you rented the movie and download it completely, then Yes, you can watch it offline.

  But if you rented the movie and download is not finished yet, that won't work. The film will not download without an internet connection.

• "How can I fix the iCloud" you cannot connect at this time "error?

  I noticed that I was not able to view my use iCloud on my MacBook Pro. To try to solve the problem, I registered on iCloud, but now I'm more able to sign in - it displays you cannot connect at this time. Try to connect again. In addition, I was not able to install anything from the App Store for about a day because it asks me my Apple ID and password and perpetually displays the activity indicator:

  

  Playlists and iCloud tabs are not sync between my Mac and iPhone 6 s either. Strangely, Messages and FaceTime are signed in and it works properly.

  So far, I tried to remove my iCloud Keychain password and delete the folder ~/Library/Application Support/iCloud/accounts - both without success.

  I wanted to create a new Apple ID to test a fresh user, however, create Apple ID link is grayed out and unclickable:

  

  To summarize:

  1. I can not connect on my iCloud account.
  2. Playlists and iCloud tabs are not synchronized.
  3. I can't download anything from the App Store.
  4. I'm not able to create a new Apple ID from my Mac.
  5. Messages and FaceTime are not affected and are still connected.
  6. I tried to remove my iCloud Keychain entry and folder in account iCloud, without success.

  What else can I try? I haven't installed any antivirus software and know that I have not downloaded something fishy to cause a virus problem or malware.

  Try to create a new ID here.

  Apple ID - create

• Can you confirm these messages that I get to update my plug-ins, when I connect on Firefox are legitimate?

  When I connect on Firefox, I get a message to update my plug-ins. Can you confirm to me the message is legitimate and not spam?

  Hello, when he appeared in the InfoBar on the browser, it is legitimate - see some plugins used by this page are out of date for the comparison. Unfortunately your platform (os x 10.4 on powerpc architecture) is no longer supported by apple or the most common plugin vendors, so it is not possible to obtain the latest versions of flash, java etc who work on your system.

  If you want to disable messages on out-of-date plugins, enter "subject: config" in the address bar of the browser, confirm the information dialog box, then find the preference named "plugins.hide_infobar_for_outdated_plugin" and double click it to switch to 'true '.

  Also note that firefox 3.6.28 was the last generation that took place on a powerpc, but if you want to use an updated firefox-based browser, you can switch to "tenfourfox" - Firefox no longer works with Mac OS X 10.4 or PowerPC processors

• Can you connect two cable on wifi networks?

  Basically, I'm trying to build it.  It was much easier in photoshop than to the fact of installation.

  

  There are many features, some wired, some wireless.  I ran son where I can run threads, but it's a bit more difficult that I thought for a domain.

  Basically, I need to connect two wired over wifi networks.   The 2nd must share this wifi via ethernet. (I can exchange picture 2 and 3 if necessary)

  There are also two 4-port switches in the mix for the NAS in the basement and other devices connected.

  Everything works the latest firmware. All computers on the network are running 10.11.4 Mac

  Can you connect two cable on WiFi networks?

  In theory, Yes.  In practice, not if you work with image, video files or other media.

  Honestly, it's a big House of cards, and even if it does not, it will be very SLOW... Since everything will depend on a connection without wire between Imagine and Imagine 3... and wireless will be much less bandwidth of a wired connection, not to mention the much less reliable than a wired connection being.

  If unfortunately, the bottom line here is that a professional, or even a good amateur would never has something like this.

  There are some other questions to ask, but by far the most important would be... is it possible that Imagine and imagine 3A connect using a wired Ethernet cable connection?

• App installed fish cactus, can you connect is no longer at the admin page

  Hi all

  I'm having a problem where after I installed app Cactus of fish I can no longer connect to my admin page. Previously, go to myaddress:80 would bring me to the admin page. Now only myaddress:80 / admin leads me to the admin page and it crashes until he tells me "ReadyNAS 'Admin Page' is in offline mode." I guess it's a problem with the apache configuration (the system uses apache, OK?) I have SSH access, so if anyone can point me in the right direction it would be much appreciated.

  Thank you

  L

  The fixed. There was a site called activated phantom fv-000-http causing trouble. I deleted it, restarted apache and now http://localhost/admin redirects to https://localhost/admin.

• Can you connect directly a Tablet wifi to your computer for the internet

  Can you connect directly a Tablet wifi to your computer for the internet

  Let me answer this way:

  Suppose you have a desktop or workstation that has a wired connection to the internet. Moreover, that this system also has a working wireless card. Another device with a pu wireless device to connect to desktop with a wireless ad-hoc connection. The desktop can be configured for connections to bridge the two and leave the system second to use "Internet connection sharing" to connect to the Internet.

  Start here:

  http://support.Microsoft.com/kb/306126

  Tom Ferguson.

• How can you stop safely remove hardware to appear when there is nothing connected to the USB ports?

  Orifginal title: Aggrevation

  How can you stop safely remove hardware to appear when there is nothing connected to the USB ports? It is causing my screen lock and give an error does not.

  Hi ElginCarelock,

  You can try to restart the computer and check.

  Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer and check.

  Hope this information is useful.

• Can you please guide me how whatsapp will connect even though the proxy?

  We are using the internet security and acceleration 2006 server.we are faced with a question, when we connect whatsapp in mobile through proxy server, it does not connect. Can you please guide me how whatsapp will connect even though the proxy.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum