Can you simultaneously connect Officejet Pro 8600 wired or wireless?

Similar Questions

• How can I stop my Officejet Pro 8600 one beep every hour on the hour...

  HP Officejet Pro 8600 works very well but the hourly beep is very annoying.

  Hello The_Majar,

  Welcome to the HP Forums!

  I understand that your Officejet 8600 beeps every hour. I will do my best to help you! Please make sure that the printer is connected to a live wall, not a surge protector. I recommend this step, that the printer can not get enough power.

  Then, try to reset the printer for more information, then 60 seconds.

  Please post your results, I'll be looking forward to hear from you.

• When you print envelopes Officejet Pro 8600

  I replaced my set two Officejet 7410 due to age, with the top two Officejet Pro 8600. Default tray position #1 (above) works fine and prints the paper standard and photographic paper nicely. Lac #2 (bottom) may receive envelopes #10.

  I use Win XP Pro service pack #3 and the suite MS Office (Word SP3) 2002. When I write a letter, it will be printed correctly in the default tray paper #1, Word allows you to go to the fall of the low 'TOOLS' to select "envelopes, their size, (#10), printing the job-oriented and if you want to add a postal bar code, and then you select the status bar (#2) and click on print.»

  This is the problem, it is unable to select a #2 tray package, even after you ask him to take the envelope tray #2 (low) instead, it takes the default bin #1 a page and print the address on this subject information!

  HP Tech support response was to "Exchange the trays' when printing envelopes! How lame is that? Over the years I owned the model 7410, I never been faced with this question...

  Before buying the 8600, I asked him at dealerships and even supported HP, if the 8600 worked similarly to my 7410 loving... The consensus was Yes.

  Which seems not to be true (at least for me). Please advise me how to solve this evolution very dissappointing. Thank you

  Hello: Unfortunately this model does not support the envelopes from the T2, you can change your settings and load the envelopes in the Tray1 and the Plains media on tray 2,

  Here is a link to the "user guide".

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&LC=en&product=4323648&

  Please look at page 165, there is a table which shows all the formats supported by shelf support.

  Please indicate the position that solved your problem as "acceptable Solution".
  I am employed by HP

• OfficeJet Pro 8600 N911A: fax wireless

  I need to be able to SEND faxes.  Is it possible to configure my Fax on my Wireless HP Officejet Pro 8600 model N911A?

  Welcome to the community of HP @BARBEO,

  I understand that you are looking to set up your HP Officejet Pro 8600 fax functionality. I'll be happy to help you.

  It is possible to configure your HP Officejet Pro 8600 to fax, however, fax can be used through your wireless network, so the printer will be connected with a telephone cord. Below, I've posted a link to a document that has some instructions on how to configure the functionality of your HP Officejet Pro 8600 fax. Please try all the steps in order and get back to me with the results.

  HP Officejet Pro 251dw, 276dw, and printers of the 8600 series - set up the all-in-one to send and receive faxes

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• OfficeJet Pro 8600: USB connected OfficeJet Pro 8600: scanning on a network: is it possible?

  Hello world.

  I have a 8600 OfficeJet Pro connected to a computer via the usb port. This computer is running Windows 7 Professional and is connected to an ethernet network.

  The printer is shared with other computers (currently running either Win & and XP Pro) connected to the network can view and print to the printer without problem. However, there is no option for network computers to scan from the 8600. This option is available on the computer that is connected to the printer via the USB port.

  Network scanning is possible even if, in this configuraiton or if the printer must be connected to the network via ethernet or Wi - Fi to take advantage of this feature?

  Thank you.

  It is better to simply connect a network cable from the printer or turn on wireless (so both as a printer usb to the computer and the printer to network for the rest).

• OfficeJet Pro 8600 loses the wireless connection

  I have a 8600 OfficeJet Pro (n911a), which has lost its connection with the PC. The computer is running Windows 7 (64) and work very well for several months. Recently, when you try to print, the following message is displayed. I did several searches on the web and found that this has been a problem in class, but no clear solution. The only thing I tried was changing layout alarm ink 'always' to 'then of printing"that someone has suggested, but that did not help. Other bids I found indictate that this problem occurs when the printer is idle for a few hours, but restart it restores. This isn't the case here. The following error message:

  

  Any advice/suggestions/etc are welcome. Thank you in advance.

  Well, the problem was solved by uninstalling the software, and then reinstall the latest version of HP.

  The only reason why that I did not it was in the first place because many comments I've seen on this issue before said they had already tried that and it didn't work. So, I didn't see no reason to waste my time trying something that might take a lot of time with little chance of success. However, the printer in question was still under warranty, so I was able to communicate directly with HP and it's what they me ultimately do. I was online with them for nearly 90 minutes to try other things first, but this is what worked in the end.

  If you decide to try it yourself, I would say that you do not forget to completely uninstall the current version first. The tech. I chatted with told me that it would be unnecessary, but do not do so caused several other problems. I finally had to do a system restore, and then try again until it would work.

  So far so good.

• OfficeJet Pro 8600 Plus: now really can not print from Officejet Pro 8600 Plus

  It is my second attempt to get help.  First aid made it worse.  I had been unable to print from my printer wireless to my MacBook Pro, iPad, or iPhone.  After 20 hours I managed to do print from a cable (it sees my network but none of my devices can see).  So I posted here asking for help and was told to uninstall the software, repair disk permissions, and then reinstall the software.  But when I downloaded the new software that my computer would not install it because it says it's for Mac system 10.7 or less and I 10.10.  So now I can't print anything at all.  I need this job.  Please help me to fix it for real.  I can't take this more.

  In fact, HP support did not help at all. I finally fixed it myself after a lot of trial and error. The answer was that the printer software was incompatible with the software on my Mac. I removed Rowmote and it started working again. Weird, Rowmote had not been a problem before, but it can be updated. I was told there was new software of the printer of February, but when I went to the driver page with the link that the person a condition he had as the old one. So if he is really a software it should be provided to users. Thank you, they were attentive, though, and I received several phone calls.

• HP Officejet Pro 8600 more N911g wireless, no work of scanning

  Wireless, no work of scanning

  Hello

  I suggest you uninstall / reinstall your printer using the Windows 7 most recent drivers that are available on the HP site for your printer model.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4323648&LC=en&cc=us&DLC=en&lang=en&cc=us

  And also use the troubleshooting TAB steps there, too.

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• I can't print to legal-size paper information. How do I do this on printer Officejet Pro 8600?

  I'm not finding where I can print info on Officejet pro 8600 legal-size paper.  I tried settings.  Anyone?  Can I put paper of legal size in the printer?  Thank you.

  Hello Sharon,

  I suggest to try to change the settings of your printer properties and change it to legal and check if it works for you.

  For more information, you can consult the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• HP Officejet pro 8600 more scan-to-Email problems

  Having a printer above, connected to my network through a static IP address. Interruption of the connection some time after the firewall on the pritner ago was accidentally tunred on and corrected cela by restoring the defaults on the printer control panel. Restored the connection via the EWS cnda wireless printing now laptop, PC and mobile devices all via the wireless.

  It, scan to e-mail settings are exactly as they were before the occurrence of the problem with the firewall (when they worked very well), but now do not work - EWS fails when he tries to test the parameters of ASNA to electronic mail. I use the standard server outbound smtp and port 25 as advised by my electronic internet/mail provider, but nothing helped.

  When I try to activate ePrint, I get a similar message: "unable to connect to the server.

  Is there something that I need to reset or reconfigure the printer?

  Concerning

  RedRoscoe

  Hello RedRoscoe,
  
  I would like to see if I can help with the Officejet Pro 8600 Plus scan to E-mail and Web Services questions. I think that the issues can be addresses by two steps, I hope.

  About scanning to E-mail, you can be blocked by the two-step verification. What is the email client that you want to activate the printer for, MSN, Gmail, etc.?

  Issues of Web Services, try to apply a manual DNS 209.244.0.3 & 209.244.0.4 to the printer's manual I.P address.

  See you soon,.

• HP Officejet Pro 8600 n11a - print multiple copies

  I use a MAC desktop computer.  I never had a problem with a printer this one up.

  It prints several copies, even if only is selected.  I put it to facotry settings, nothing helped.

  Hello SaMac2,

  I understand that you have found several printed copies when you use your Officejet Pro 8600 and Mac. If you make a copy and select only one copy, it print multiples also?

  You can try to uninstall the printer software, repair disk permissions on the Mac, put the Apple icon updated, restart the computer and download / install the software again. (since I don't know the installed Mac version, click on the 'Download' link, select your operating system and then hit next, click driver - product Installation software then download).

  I'll check for your response.

• Upgrade officejet pro 8600 PCL 3 enhanced PCL 5 enhanced via a pilot?

  Can I put an officejet pro 8600 current capacity of PCL 3 enhanced PCL 5 enhanced via a software driver? Also there are books of HP PCL 5 or PCL 3 programming?

  To add to the response of Bob Headrick:
  
  The majority of inkjet devices support only hatched Languages of Description of Page, more based on improved PCL3variants; HP does not seem to publish details of these languages (with the exception of some collaborators under license).
  
  Most LaserJet devices (with the exception of cheap ones) offer three standard s: of PDL

  • PCL5 (PCL5e for monochrome, PCL5c for color)
  • PCL6 (aka PCL XL)
  • PostScript (aka PS)

  Models cheaper LaserJet does not support the PDLs standard, but rather to use other raster "host-based" languages (for example JetReady, which I understand is based on a variant of (very) stripped of PCL XL).
  
  This link provides a brief history of the PCL language and links to technical PCL Reference and also to other PCL5 & PJL manuals manual; Be aware that some of the manuals (in PDF format) are several megabytes of downloads.

  To get the documentation for PCL XL :
  
  Go to the developer web site

  Then select the option "Public Software Development Kits.

  Then select the "LaserJet and Digital Sender" kit box.

  Then select the "printer languages |" PCL 6 | PCL 6 records"folder, which gives access to various documents PCL6 (most are in PDF format)."

• HP Officejet Pro 8600 Premium - black line on pages that pass through the document feeder

  Hello! I have a HP Officejet Pro 8600 Premium. Any time that I scan, fax or copy via the document feeder a black line appears on the document created. Anyone know how to fix this?

  Thank you in advance,

  Lynn

  Hello Lynn_Fritschi.

  I see that you encounter errors of quality on your prints when you use the Officejet Pro 8600.

  Here are two links that should be useful for you. The first is to support your product page and the second is a document that explains errors output quality and the ways to solve them.

  HP Officejet Pro 8600 Support

  Vertical stripes, lines or streaks on Copies, faxes or scan

  Please let me know if they help you.

  -Chauntain

• the officejet pro 8600 can connect more than one wireless router?

  the officejet pro 8600 can connect two separate wireless routers?

  Hi Thetinman,

  No, it is not possible that you can be connected to 1 router at the same time.

• CAN; t enable web service on HP Officejet Pro 8600 N911a

  N911a HP Officejet Pro 8600 that we have installed this printer as a network printer.  Everything works fine except that I can't activate the Web service to printing or scanning to an e-mail.  He says that the printer is unable to access the internet.

  Hello. Power cycle the printer and the router to see if that will clear up the error message. Do disconnect the router and then turn the printer off using the power button. Then plug the router back in and once it is up a running, turn on the printer and try to reconnect to the web services

  Then, if he is still unable to connect, I would set a static DNS on the printer. To set a static DNS, you must Access the built-in web server (EWS). Do so you by entering the IP address of the printer in the address bar of the browser of your choice.

  Once it opens your Officejet EWS, locate the tab titled 'network '. From there, look in the left column on the new page that will pop up and select IPv4, wired or wireless will depend on how the printer is connected to the network. That will bring up the page set static DNS. This will be the 2nd part of this page.

  Set the radial dial to the manual. Then, for the favorite/Primary manual DNS, set it to 8.8.8.8 and the manual Alternative/secondary to 8.8.4.4; then click on apply.
  NOTE: If another message with an option to click on 'OK' is displayed, read this message. Most of the time there is an option to cancel the change you did right and you want to avoid to click on this message. Just sail away this page by clicking on another tab.
  Power cycle the printer. Once the printer is upward and through calibrations to turn on. Try again to connect to web services by touching the icon.