NTDLL. Failed module DLL

Similar Questions

• Programs closing failing module NTDLL. DLL

  Failed module NTDLL. DLL

  A couple of days started programs closing without error. When I look at the report in the event viewer, I see that the failed module is ntdll.dll that it becomes really annoying because it hampers my ability to do my job. This affects programs such as Chrome, FireFox, Apache, and Spyware Doctor.

  Do you get this problem if you test in safe mode?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem is not reproducible in Mode safe, see if you can follow the next article and isolate the cause.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  You could also test the problem when you are connected to another user (that you may need to create test purposes).

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  A check for malicious software could be interesting, too.

  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

  SuperAntispyware
  http://SUPERAntiSpyware.com/

• weird problem with Terracopy, failed module name: ntdll.dll.

  LM, I was wondering how to fix this problem:

  Name of the failing application: teracopy.exe, version: 2.3.0.0, time stamp: 0x52a2ba02
  The failed module name: ntdll.dll, version: 6.1.7601.22436, time stamp: 0x521eaa80
  Exception code: 0xc0000005
  Offset: 0 x 00032532
  ID of the process failed: 0 x 710
  Start time of application vulnerabilities: 0x01cfd4875bf40e52
  The failing application path: C:\Program Files\TeraCopy\teracopy.exe
  The failed module path: C:\Windows\SysWOW64\ntdll.dll
  Report ID: a3d32145-407a-11e4-9b85-c3289d97281b

  Hello

  I am happy that the problem didn't happen after the downgrade.

  Ntdll.dll is mainly concerned with system tasks and includes a number of features of kernel mode that allows a "Windows Application Programming Interface (API)". The ntdll.dll is also responsible for messages, timing, threading and synchronization in the operating system.

  Since you don't have any problems, I wouldn't worry about the dll file.

  Answer if you have issues with Windows.

• Windows service crashes with failing module NTDLL. DLL

  I have a Windows service (Controller.exe) written in .NET 3.5 SP1, which runs on 2008 R2. The service blocks with the following entry in the event log:

  Name of the failing application: Controller.exe, version: 0.7.0.1424, time stamp: 0x50d232dc

  The failed module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7c8f9

  Exception code: 0xc0000374

  Offset: 0x00000000000c40f2

  ID of the process failed: 0 x 2048

  Start time of application vulnerabilities: 0x01cde94e239bd028

  The failing application path: K:\Weeden\Worms\Weeden.Worms.Controller.exe

  The failed module path: C:\Windows\SYSTEM32\ntdll.dll

  Report ID: 06f96576-55a2-11e2-8097-d8d385bcce80

  There is nothing in the app logs to indicate that the application has been done nothing at the time wherever it crashed. He has done a few times before (but seldom - once every two weeks or more).

  The only entrance at the time of the error is the one where it says The Windows Error Reporting Service service entered the running state. But I suspect that it is just to log the crash.

  Can someone please advise on the issue?

  Thank you!

  Hello

  Thanks for posting your question in the Microsoft Community Forum.

  According to the information, you're faing questions about Windows Server 2008 R2, Windows Service hangs with NTDLL module failed. DLL.
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums for further assistance. . You can follow the link to your question:

  Technet Windows Server general forums

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• failed module cvirte.dll

  I'm using LabWindows 9.01 and I'm having a problem with the program crash. Following is from the XP application event log.

  (NOTE: this journal entry is deceased at the time of the accident)

  Failing application bluetest.exe, version 1.0.0.0, failing cvirte.dll module, version 9.0.1.375, address 0x0038e11a failure.
  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Accidents always met to address failure 0x0038e11a.

  The following occur 1 to 7 times journal entries before the crash. There are several events of this type before the crash.

  The description for the event (0) in Source (ICB) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: [22:15:04.250] [FATAL] [LRemoveItem] [.. \james\list.c:543] assertion failed: 0 (itemPosition > = kEndOfList & itemPosition <= (*thelist)-="">numItems).

  OR

  The description for the event (0) in Source (ICB) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: [17:30:29.135] [FATAL] [LNumItems] [.. \james\list.c:739] assertion failed: 0 (CheckSanity (question)).

  What is the purpose of "list.c" and specifically "(question) CheckSanity" and "itemPosition > = kEndOfList & itemPosition <= (*thelist)-="">numItems '.

  Thanks, Jim

  Hey Jim -.

  I'll guess that you run into the same problem reported here.  You call also Delay() threads other than the main user interface thread?  If so, could you try replacing them with a call to Sleep() (#include windows.h) method?

  Thank you-

  NickB

  National Instruments

• Event 1000, Application error (the default application name: w3wp.exe - name of the failed module: KERNELBASE.dll)

  Hello guys,.

  During the execution of a web app to make me as a mistake: remote server does not. Here are the details of the spectators of the event who were captured at the same time where this error occurred:
  Event 1000, Application error
  The failing application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0eb

  Name of the failed module: KERNELBASE.dll, version: 6.1.7600.16850, time stamp: 0x4e211da1

  Exception code: 0xe053534f

  Offset: 0x000000000000a88d

  ID of the process failed: 0 x %9

  Start time of application vulnerabilities: 0 x % 10

  The failing application path: %11

  Path of the failing module: 12%

  Report ID: 13%
  Event 1001, Windows Error Reporting
  Bucket of error, type 0

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: w3wp.exe

  P2: 7.5.7600.16385

  P3: 4a5bd0eb

  P4: KERNELBASE.dll

  P5: 6.1.7600.16850

  P6: 4e211da1

  P7: e053534f

  P8: 000000000000a88d

  P9:

  P10:

  Attached files:

  C:\Windows\Temp\WERC9CD.tmp.WERInternalMetadata.XML

  C:\Windows\Temp\WERC9CE.tmp.HDMP

  C:\Windows\Temp\WEREE30.tmp.mdmp

  These files are available here:

  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_30877924d6b2c607fe88a8718915f25fb79093_cab_e905f2b0

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: d46a6849-8f6a-11e1-98af-00215e6e4855

  Display state: 4
  It is a priority issue we are facing in IIS. IIS is configured for the 2.0 Framework and underlying operating system is Windows Server 2008 R2 Standard. Please suggest how to solve. Any input related question above is significant.

  Hello

  In dealing with the problem with Windows Server 2008, it would be preferable to send the same in the Technet community for more help.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• NCICore.exe and NCIArchive.exe Module MSVCRT failed. DLL.

  I'm having a similar event with Nstar of Honeywell, software to access security to what happened last year in the spring. I installed the Windows updates yesterday morning and when I rebooted the machine I had the same NCICore.exe/msvcrt.dll flaws question as it happened last year.

  This isn't a problem with KB981793. That is not installed on the card system. I guess there is a new update to the original a similar problem. Has anyone seen this problem? Do you know what was updated, it might be?

  Thank you.

  Event type: error
  Event source: app error
  Event category: (100)
  Event ID: 1000
  Date: 21/04/2011
  Time: 08:02:32
  User: n/a
  Computer: NYC-CARDSYS
  Description:
  Failing application NCICore.exe, version 0.0.0.0, failed module msvcrt.dll, version 7.0.2600.5512, fault address 0 x 00037168.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data:
  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 4 43 49 ure NCI
  0018: 43 6f 72 65 2 65 78 65 Core.exe
  0020: 20 30 2e 30 2e 30 2e 30 0.0.0.0
  0028:20 69 6e 20 6 d 73 76 63 in msvc
  0030:72 74 2e 64 6 c 6 c 20 37 rt.dll 7
  0038: 2nd 2nd 30 32 36 30 30 2e.0.2600.
  0040: 35 35 31 32 20 61 74 20 5512 to
  0048: 6f 66 66 73 65 74 20 30 offset 0
  0050: 30 30 33 37 31 36 38 0037168

  An update for this problem is that a system restore solved the problem, but I still want to install the updates on hold except for the update which breaks nstar.

• Event ID: 1000 Faulting application devenv.exe, version 8.0.50727.762, stamp 45716759, failed module gdiplus.dll, version 5.2.6001.22319, time stamp 4a841b37, debug? 0, address of failure 0x0001bf5e

  My repeateedly of crash of visual studio 2005 in 10-20 minutes

  with the following error

  Event ID: 1000

  Failing application devenv.exe, version 8.0.50727.762, time stamp 45716759, failed module gdiplus.dll, version 5.2.6001.22319, time stamp 4a841b37, debug? 0, address failure 0x0001bf5e.

  Event ID: 1023

  .NET runtime version 2.0.50727.3615 - engine error fatal execution (7A2E1122) (0)

  Hi ashnov,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  Method 1

  I suggest that you install the updated drivers for the graphics card on the computer by visiting the card manufacturer or the manufacturer of the computer Web site to download and install the drivers, check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Method 2

  If the previous step fails, then I suggest that you do the system restore and check if it works.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Method 3

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 4

  If the steps above fail, then reinstall the program and check if that helps.

• Event ID: 1000 - Faulting application vstudio.exe, version 13.0.0.0, failed module msvfw32.dll, version 5.1.2600.5512, fault 0x0000a81a address.

  Failing application vstudio.exe, version 13.0.0.0, failed module msvfw32.dll, version 5.1.2600.5512, address failure 0x0000a81a. After execution of the application for a day or two, the application closes.  The event log has been as above.  I ran "sfc/scannow" but he has no apparent effect.  Nothing in the log of events to indicate any repaired or replaced file.  How do I know if msvfw32.dll is bad, and if it is, how do I replace it.   If this is not bad, what else could be the cause?

  You run Microsoft® Windows® Update?  There are a couple of security updates for Visual Studio, DirectShow and Quartz which involve the msvfw32.dll and vstudio.exe.  Try and let the forum know if this helped.

• LaseJet M1212nf MFP "" name of the failed module: HPM1210GC. "» DLL.

  I have installed HP Laserjet M1212nf MFP on 3 differnet PC (win8/win7) and when I try to print the spooler service stops

  with erro "" name of the failed module: HPM1210GC. "» DLL.

  I did a check on the forum and found out that I have to use universal drivers.

  I can not find them. I can hardly even find HP drivers from the HP site.

  Any ideas where I can find the universal drivers?

  Thanks in advance

  Hi Dyktio,

  Looks like you may have a problem with the spooler service for printing on the operating system of the pc. HP has developed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity:

  HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  http://www.HP.com/go/tools

  I would like to know what are the errors you receive?

• Failed application softwareupdate.exe, version 2.1.3.127, failed module urlmon.dll on Windows 7

  Original title: don't know how to fix this help please

  Failing application softwareupdate.exe, version 2.1.3.127, failed module urlmon.dll, version 8.0.6001.19258, address failure 0 x 00039953.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  This could be any malware or virus. Please a scanner.

  You can download the Microsoft Safety Scanner at the following address:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  It's free and helps remove viruses, malware, spyware and other malicious software.

  Let us know if that helps.

• ITunes.exe disappears in Win7, Exception code: 0xc0000005, failed module name: es.dl

  On a computer laptop 64 bit of Windows 7 Pro SP1 Toshiba Satellite A505, when I run Itunes, no window never appears. If I look at the Task Manager, "itunes.exe * 32" appears briefly and then disappears.

  I ended ipodservice.exe, no diff. ITunes started in SafeMode to Itunes, no diff (in windows Windows safe mode OR normal mode).  I tried to create another user - same question. I tried to disable the antivirus. I have scanned for viruses.  I uninstalled ALL of the apple software and removed ALL the apple on issues (including Hello, apple blah, quicktimes, itunes, etc.), as in
  http://support.Apple.com/kb/HT1923

  The problem persisted. After the most recent removal / reinstall, I went to the event viewer > applications and found the following. I have not found anything online about es.dll and itunes.

  _______
  Log name: Application
  Source: MsiInstaller
  Date: 31/07/2014-18:07:11
  Event ID: 1039
  Task category: no
  Level: WARNING
  Keywords: Classic
  User: Owner-PC\Owner
  Computer: Owner-PC
  Description:
  Product: iTunes. The application attempted to change a protected Windows registry key \CLSID\{44EC053A-400F-11D0-9DCD-00A0C90391D3}\ProgID.
  ____

  Log name: Application
  Source: Application error
  Date: 31/07/2014-18:09:29
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Owner-PC
  Description:
  Name of the failing application: iTunes.exe, version: 11.3.0.54, time stamp: 0x53bc1265
  Name of the failed module: es.dll, version: 2001.12.8530.16385, time stamp: 0x4a5bda4e
  Exception code: 0xc0000005
  Offset: 0x00006ef9
  ID of the process failed: 0x1aac
  Start time of application vulnerabilities: 0x01cfad253d3a5a2a
  The failing application path: C:\Program Files (x86)\iTunes\iTunes.exe
  Path of the failing module: C:\windows\system32\es.dll
  __

  Log name: Application
  Source: Windows Error Reporting
  Date: 31/07/2014-18:09:33
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: Owner-PC
  Description:
  Fault bucket 378197881, type 17
  Event name: APPCRASH
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1: iTunes.exe
  P2: 11.3.0.54
  P3: 53bc1265
  P4: es.dll
  P5: 2001.12.8530.16385
  P6: 4a5bda4e
  P7: c0000005
  P8: 00006ef9
  P9:
  P10:
  ______

  These indicate any fix that I have not already tried above?

  Yes, I did, including "blah apple."

  That's why I've included the list of apple, if you missed something.

  Did you read this part of my answer?

  "If the advice already given does not, please contact Apple Support for assistance."

  See you soon.

• error when calling NtSetTimerResolution in NTDLL 1097. DLL

  I get 1097 error when calling NtSetTimerResolution in NTDLL. DLL. why?   I scoured most of the posts on this forum describing the 1097 error and tried the solutions without success.

  This is a link to the function prototype (copied below) that I adapted in the node call the attached vi library (you will be asked to locate NTDLL. DLL on your system when opening it)

  NtSetTimerResolution and NtQueryTimerResolution are defined as follows. All hours are stated in hundreds of nanoseconds.

  NTSTATUS NtSetTimerResolution (
  IN ULONG RequestedResolution,
  IN BOOLEAN defined.
  ON PULONG ActualResolution
  );

  Parameters

  RequestedResolution

  The desired timer resolution. Must be the legal scope of the system timer values supported by NT. The standard x 86 systems it's 1 to 10 milliseconds. The values that are within the acceptable limits are rounded to the next higher standard x 86 HAL millisecond limit. This parameter is ignored if the Set parameter is set to FALSE.

  Set

  This is TRUE if we ask a new resolution of the clock, and FALSE if the application is indicating that he hasn't needed a resolution already implemented.

  ActualResolution

  The resolution of timer in effect once the call is returned in this parameter.

  Woohoo! I solved the problem.

  I was using a copy of NTDLL. DLL C:\Drivers\I386\SYSTEM32\NTDLL here. DLL (version 5.1.2600.1106)

  instead of C:\WINDOWS\system32\ntdll.dll here (version 5.1.2600.5755).

  An observation aside Interestingly enough, I did, when I tried to put the old version in C:\WINDOWS\system32 to see if it was just a problem of dependence, rather than a version number, I couldn't do it!  I tried renaming C:\WINDOWS\system32\ntdll.dll C:\WINDOWS\system32\ntdll.dll.old and immediately a replacement c:\windows\system32\ntdll.dll pop up would be in his place! I even tried to drag / drop of C:\Drivers\I386\SYSTEM32\NTDLL. DLL C:\WINDOWS\system32\ntdll.dll, it seemed to replace, but a system of security immediately replaced it with the latest version.   WinXP is smarter than I thought, or maybe something like Microsoft Windows Defender Antispyware installed by our company does this.

  In any case, I've confirmed lateer version is necessary because when I copied C:\WINDOWS\system32\ntdll.dll to C:\Drivers\I386\SYSTEM32\NTDLL. DLL, it also solves the problem.

  You might well ask why I did not use the correct version in the first place - well not knowing where he was, I only noticed the old version when I searched for it with my Google Desktop.

  Rgds

• Failed application Explorer.EXE, version 6.0.6001.18164, failed module MpegSplitter.ax, version 1.0.0.4

  Explorer.exe hangs in a loop.

  Application Explorer.EXE, version 6.0.6001.18164, time stamp 0x4907e242, module MpegSplitter.ax, version 1.0.0.4, time stamp 0x45edac44, exception code 0xc0000094, offset error 0x0002456b, process id 0 x 944, failed failed application start 0x01cb47413a850af2.

  
  

  http://www.pcmech.com/Forum/Windows-OS-support/192341-mpegsplitter-AX-error.html
   
  --
  ..
  --
  "Singapore Ashutosh Upadhyay" wrote in message
  News: 3859dfb9-5743-40 b 4-9115-f8e46443470d...
  > Explorer.exe hangs in a loop.
  >
  >
  >
  > Faulting application Explorer.EXE, version 6.0.6001.18164, time stamp
  > 0x4907e242, failed module MpegSplitter.ax, version 1.0.0.4, timestamp
  > 0x45edac44, exception 0xc0000094, offset 0x0002456b, process id error code
  > 0 x 944, 0x01cb47413a850af2 application start time.
  >
  >
  >
  >
  >
  >
   
   

• Acrobat Pro XI crashing, failed module: EDITING. API

  Acrobat Pro XI 11.0.4.63 (running on W7 Pro + SP1, 64-bit) suddenly started to crash when you move text fields in forms. Now, I am unable to add or change any text in the text to any PDF form fields. No updates, installations or modifications of the system were made before or at the beginning of this issue.

  I tried: disable antivirus. Use safe mode; repair facility; Install plugin failed out of the way of reference and repair; Uninstall + CNettoyez registry + full reinstall; and reinstall without updates. The Acrobat software is unusable in its current state. I would appreciate help!

  Other Adobe products installed:

  AIR 3.5.0.1060

  Download Wizard 1.2.5

  Flash Player ActiveX 11.9.900.117 11

  Flash Player 11 Plugin 11.9.900.117

  Reader XI 11.0.05

  Error event logs:

  Log name: Application

  Source: Application error

  Date: 15/11/2013-11:44:48

  Event ID: 1000

  Task category: (100)

  Level: error

  Keywords: Classic

  User: n/a

  Description:

  The failing application name: Acrobat.exe, version: 11.0.4.63, time stamp: 0 x 52288928

  Name of the failed module: TouchUp.api, version: 11.0.4.63, time stamp: 0x5228881c

  Exception code: 0xc0000005

  Offset: 0 x 00018640

  ID of the process failed: 0x16e0

  Start time of application vulnerabilities: 0x01cee221f2859d70

  The failing application path: C:\Program Files (x 86) \Adobe\Acrobat 11.0\Acrobat\Acrobat.exe

  Path of the failing module: C:\Program Files (x 86) \Adobe\Acrobat 11.0\Acrobat\plug_ins\TouchUp.api

  Report ID: 3d30639b-4e15-11e3-966b-1803732675a0

  Try the following steps:

  1. download and install 11.0.5 Update: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5673

  2 remove preferences. Here's how to remove preferences:

  (a) Goto C:\Users\\AppData\Roaming\Adobe & erase all the contents of that folder Acrobat file

  (b) Goto C:\Users\anish\AppData\Local\Adobe & remove all content

  Now start the application.