NTLDR error on Satellite L35-S1054 lack
I was with my recovery cd and applications to restore my laptop to the orginal way he was, and my child cancelled my recovery and now when I try to boot my laptop it tell me that NTLDR is missing, CTRL/ALT/DEL to restart.
When I restart it, the same message appears.
Can someone tell me what I need to do to fix this problem. My laptop is a Satellite L35-S1054.
Any help will be greatly appreciated.
It seems to be something wrong with the files on your system disk HARD or with the HARD drive itself.
I have read different statements about this error and to be honest that the installation of new OS could contribute to.
If you n t have the recovery CD, you can use an original Windows installation CD, and then you could install the Toshiba drivers downloaded from the driver page.
Good luck and feedback would be appreciated
During the recovery, I get "" error: 10E7160001 "." He gets as much as 90 percent of the disk two and then stops and gives the message that an error has occurred. It has a button 'ok' to stop.
If you reboot, you get a blue screen and then it restarts. It's a phone of friends and he brought to me. It's a laptop Satellite L35-S1054.
Thanks for your time!
Enter the BIOS and you'll find the option set to default settings. After this try to reuse the recovery CD. I can't imagine that there is a problem with the recovery image. If the installation of recovery stops abruptly, it can also be because of the defective HARD drive, maybe some bad sectors.
I can't get the internal WIFI to work! I wiped the day the first HARD drive and reinstalled a fresh XP Pro SP2. I manually installed all drivers except toshiba machine has not properly categorized them. Does anyone have a link for the real for L35-S1054 Atheros wifi driver?
Also, how to turn on the radio for him once it is properly installed? I see a Fn F8 button that looks like the radio, but it does nothing. Do I need a hotkey program to do this work?
And thank you!
The discussion is a little confuse
Have you checked the Device Manager and checked her if the Wlan card driver has been correctly installed? Check it out.
But back to the root. The device seems to be a mobile American. I put t know if the American notebooks come with drivers CD or not, but normally you should have the drivers on the support. If this isn't the case, then the image of Toshiba contains options for creating a CD of drivers and tools clean.
The laptop with Atheros Wlan card supports also an Atheros Wlan client utility.
This sets up the WiFi connection. You have 2 options. You will use the clean Windows configuration or you will disable her and use Atheros client utility.
But in a first time, you must activate the Wlan with the switch on the side of the laptop and the Fn + F8 key combination
I have a Toshiba L35 (Windows Media Center Operating System) with the software WiFi Atheros AR5005G. This machine was purchased in the United States.
While in the United States the Wi - FI connection to a router (Linksys) using Windows to configure was instant without any problem.
I am now in England and when I try to connect to a Modem/Router (3 com), use Windows to configure, connection is spasmodic with what makes a connection on every five attempts. Several times I have to use the repair connection device trying to connect. When it connects the connection is good. When you use the repair it shows unable to renew your IP address if it connects. On other occasions, I use the network connection Panel and 'disable' then 'activate' then most guarantees a connection.
The laptop provides instant connection when you use a card PCMCIA WiFi with Windows to configure. While the card is inserted the s computer WiFi connect instant however when the card is removed and the computer restarted the same problems occur for a computer, free WiFi!
Other laptops have no problems to connect to my Modem/Router. I am convinced that it is working properly.
All regional/language settings in the control panel have been updated with the United Kingdom.
No undates are available for the Atheros Driver or BIOS.
Anyone can help identify the problem/possible settings to change?
Satellite L35 is a portable American designed for the American market. BIOS and drivers should be downloaded from the Toshiba site we and not on Toshiba Europe site.
However, the error message Impossible to renew your IP address is known to me and my brother had the same problem with the Intel card. I just updated the WLan driver and used the Intel Proset utility for WLan configuration.
I see that you have the Atheros card. The Atheros also provide an Atheros WLan client utility. Try to use instead of the clean Windows configuration.
In addition, place check WLan card properties. You will find energy saving option. Please turn it off and check the Advanced tab
Hi, I just buy a satellite L35-S2151 (SN: 96074254W), this is my first Toshiba laptop. Everything is great, except for the battery, it will last a little short.
So I need to add another battery, my question is what is model number of batteries can be used in L35-S2151, each ending number with "1BRS? Could you give me a list of number of models?
The laptop seems to be designed for the American market. Did you buy it in the United States?
However, if you want to buy a battery for your laptop you should always use the compatible and supported a.
I m not 100% sure, but I think the L30 series uses the same batteries.
On the Europe of Toshiba in the Options box & accessories page I found some batteries for a laptop Satellite L30.
Battery (6 cells, 4300mAh PA3399U-1BRS
Battery (Li-ion, 4000mAh, 6 cells) PA3465U-1BRS
Battery (Li-ion, 4300mAh, 8 cells) PA3457U-1BRS
Extended capacity battery (Li-ion, 6000mAh, 9 cells) PA3478U-1BRS
Battery high capacity Pack (Li-ion, 12 cells, 8600mAh) PA3400U-1BRS
You must pay attention on the value of mAh. A higher mAh value means better performance of battery power.
I think you can order these batteries in the Toshiba authorized service provider and additional, you should ask the compatibility of battery.
I'll replace it the hard drive in my Satellite L35-S2161 next week. (I tried this a couple of weeks, but I couldn't get the wireless or PowerSaver utility to work so I put the hard drive and everthing back in original works)
So what drivers should be installed and in what order. In addition, there is no package Toshiba added value listed in the site Web of Toshiba for my L35 with Windows XP. So is that what I need Toshiba value added package (PVAT), if so where can I find it? I opened my Toshiba restore disk and the folder COMPS1 contains all drivers and utilities that I need. But there is no Toshiba value added package (PVAT).
The only thing I can find in the restore disc is a folder named 'Utilities Toshiba 1' and Notepad in this folder say "+ this package is for the Toshiba Utilities. It includes energy saving, which can help you customize the settings of hardware + your computer and hardware configuration features. ', it's the Toshiba value added package?
Yes, I can use the restore disc, but I would use my retail XP Pro instead. So, if anyone can help with the * correct driver / utility install command *, it will be greatly appreciated
Thanks for any help you can provide.
As I m don't me wrong, Satellite L35-S2161 belongs to the Toshiba US series. All drivers must be placed on the page of the Toshiba driver we.
The package of value added is not created and designed for Win XP. It s only for Vista and Win 7!
Using Win XP you must install the Toshiba Power Saver Utility for Windows XP (v7.03.07Q, 25/08/2006; 6 M) in order to obtain current installed saver.
Regarding the WiFi network:
In my opinion you have not installed the right driver.
There are two possible different WLan cards; WLan or Intel, you will need to install the WLan driver which is compatible with the wireless network card.
I'm upgraded memory in my laptop of buddies, but for all intensive purposes, it will be here on out considered a mine.
The toshiba satellite L35 originally supplied with 1 x 512 MB of RAM, 6 months, I have improved, putting 1x1gb stick in and keeping the 512 to so (it has worked well for all the time I got it). I decided to upgrade again and bought 1x2gb stick.
When I put in, I put 2 GB key on the slot 0 (correct me if this is the wrong term for the slot in the bottom when the laptop upside down) and the stick of 1 GB in slot 1.
When I started the computer should only 1.87 for the RAM, then it should be a little less than 3 years.
I tried all the combinations involving the stick 2 GB
2 GB to location 0, 1 GB in slot 1
2 GB in location 1, 1 GB in slot 0
2 GB at location 0, 512 MB at 1 location
2 GB in slot 1, 512 MB at location 0
For all this he appears as 1.87, no matter where the 2 GB is and what else is there with her.
the 512 MB (original computer) is hynix 512 MB 2Rx16 PC2-4200
the 1 GB (updated 6 months ago) is kingston KVR667D1S0/1 GR
2 GB (brand new) is DDRII533 G.Skill PC2-4200 (F2-4200CL4S-2GBSQ)
I am gets mixed responses from crucial.com and memoryx.net all this notebook can handle.
So my question, I guess... I have to send the G.Skill back and get a different 2 GB? What is the compatibility issue?
Should I get a kingston? Or I just do something wrong.
Thank you guys and thanks for the forum in general, I looked here for instructions on how to install memory in a laptop, I've only done so far, desktop computers so I was puzzled and didn't break anything.
The L35 unknown for me. It seems to be a series of laptop designed for the American market.
But the L30 is known to me and I know the L30 is very similar to the L35.
However, the point is that the RAM can be upgraded only up to 2GB.
This means that you can use a 1 GB module in a slot.
A upper memory module size is not supported by the memory locations and therefore the laptop shows about 1.87 GB RAM.
Hope this helps to explain the problem.
I have a Toshiba Satellite L35-S2161. It was initially equipped with a Celeron M 410. Last weekend, I replaced the Celeron with a Pentium Core Duo T2250. Everything works fine. Now, both the Celeron and Pentium seem to run a bit hot.
The beach of temp for both are exactly the same. Honer time between Celcius 55 to 62 degrees Celsius.
Is it possible to set the fan to maintain a temperature between 50 to 55 degrees? If so, how?
Check this http://aps2.toshiba-tro.de/kb0/FAQ7A01ZW0007R01.htm
-It is uncertain whether the new processor is compatible to the system board. Integrated chipsets can take charge of their technical specifications a wide range of processors, but this does not mean that all types of CPU can be used in a mobile system for * integrated cooling systems are designed individually for each set of model in order to ensure the optimal functioning of the machine *. An incorrect CPU can cause the system to overheat and damage the internal system components.
-In most cases, the BIOS does not work with the replaced CPU which causes a malfunction of the machine. The BIOS needs to be rewritten after each Exchange of a CPU that can only be done by an authorized Toshiba service partner.
Hello ervery body.
I have a Tosbiba Satellite L35-SP4090 and I want to buy a 120 GB hard drive.
My question is?
This hard drive will be compatible whith my laptop?
Please, I need their help.
As far as I know the laptop Satellite L35 was equipped of different SATA drives.
I'm 100% sure that it supports a 80 GB and 100 GB of HARD drive
I think you have a good chance that the L35 would support a 120 GB SATA HDD too.
Hi, my laptop Satellite Pro A10 displays IDE #1 error whenever I try to put it on. This message is all I get, even if it is shown for a short period of time - the laptop always comes back to this message, it tries to load blanbk of the screen just go and then this message appears every time! I was wondering if someone could explain what this means and how can I solve this problem?
This error occurs if there is a problem with the CD/DVD drive. For example, this error occurs if you try to use the incompatible reader. It will be interesting to see what happens if the drive is removed.
You did any player upgrade?
I have Vista Business installed on Toshiba Satellite Pro U200
and, in the event log, the following error message:
Log name: Application
Source: Application error
Date: 20.11.2008 18:06:38
Event ID: 1000
Task category: (100)
Application TCrdMain.exe, version 18.104.22.168, time stamp 0x458faba6, failed mscorwks.dll module, version 2.0.50727.1434, time stamp 0x4757b767, exception code 0xc0000409, offset error 0x002b832f, 0xe38, failing application start 0x01c94b322888a3c2 process id.
The event XML:
0 x 80000000000000
someone knows howto fix it or where can I download this software of Flash cards and reinstall?
ist it this software?
Flash Media Driver
http://de.computers.Toshiba-Europe.com/innovation/vista_drivers.jsp?macId=&mode=userMachines&userOS= & action = search & selProduct = 656 & selOS = 26 & selType = 244 & country = 37 & language = 13 & search =
Can someone help me with this and also tell me about.
Everytime I turn on my laptop I get notification message "Configfree has stopped working"... "try to get the solution on the internet... "and I don't know what is the problem and how to fix it.
I have Toshiba Satellite L850-13R, i7, using Windows 7 Starter.
Can someone tell me what is this error and how to fix it? and, also, my laptop is very slow since I got these notifications. I scanned and there are no threats found...
Thank you in advance...
I m not very well why the Utility of Toshiba ConfigFree has stopped working, but I can tell you how you can solve this problem.
I think simple installation ConfigFree could solve this annoying problem.
How the product?
First download easy all the utility driver page ConfigFree Toshiba UE
Please pay attention to the version. There is a ConfigFree utility for 32-bit system and 64-bit.
After the ConfigFree utility has been downloaded, uninstall the previous software installed.
In Control Panel-> programs & features, you should find the ConfigFree
After the tool has been uninstalled, restart the laptop
Then unizip the package downloaded and start the installation.
Reboot once more.
... That's all :)
I installed Windows XP Pro SP2 ENG on laptop Satellite M100-179 (PSMA1E), under my account to download site http://ru.computers.toshiba-europe.com latest versions of drivers and programs.
V.5.90.05 ConfigFree installation just after the departure of setup.exe there is error not supported operating system and the program does not work.
It's wrong? Help!
It is important that you will install all the drivers, tools & utilities in the correct order.
Generally, you will find this guide line in the Installation Instructions which is placed on the page of the Toshiba driver.
Well, buddy, it seems that you have to reinstall the tools again.
But wait... did you use the English version of ConfigFree? It seems that you have downloaded the Russian page tool.
If you use English installing XP Pro, English version
I bought a laptop Satellite A135-S7404 and had a problem with an operating system.
I went to recover the system with the CD that came with it but 3/4 of the way threw the second disc, it stops and gives me a 10-FC12-0017 error message and wants me to stop.
I can't use my phone is there a download or a way to get the mistakes of the past?
I use Vista OS.
I don't know about you, but I guess that this error has something to do with the HARD drive. It must be a problem with the HARD drive. I recommend you to speak with the closest authorized maker Toshiba. I hope that the laptop is still under warranty and if the HARD disk is defective it will be exchanged free of charge.
I have a c50 - A Satellite that has been upgraded to windows 10. All seem to work well, she has recently begun "stuttering". While typing intermittently stops, then stop accepting strikes then restarts the missing parts of words. I understand that it was a problem on the former satellites and was resolved by updating the BIOS. I tried this but it says that ROM is the same version that I downloaded so we can assume this means I'm updating. Someone at - it other ideas on how to solve this problem. Press also intermittently stops responding during short periods of time.
Also installs Toshiba service station for windows 10. Downloads file but says error 2753 file may be corrupted (have tried more than once!)
(10 Windows running free antivirus Bitdefender)
I made some progress with this if someone has a similar problem. I worked on that it all started when Google chrome stopped working. This means that my husband went to use onboard. I got Chrome working by disabling Trusteer report Office such that it has a problem with Chrome at the moment. Stuttering does not appear in Chrome. Then returned on board and he was always there. I tried Internet Explorer and it also stuttered. I stopped the Shockwave plug-in and it went off in Internet Explorer. Edge still has the problem, which is strange because it uses no plug-ins always at least I have 2 browsers I can use it until the edge is sorts.
Maybe you are looking for
I just installed TB 24.4.0, brightening 2.6.4 and the provider for Google Calendar 0.25Earn 8.1 64-bit (I use desktop 99.9999% of the time)Dell XPS 18, 8 GB of RAM, C: has 363 GB free It is on the mail tab the "pane today" always use 1/2 window. I ca
Why and where is the back botton arrow in the upper left corner of the desktop, or the computer? The arrow that you can click if you want to return to the previous page of your screen?
The homepage of app world just does not load if I can access app links page. Help
Hello Someone help me... As if any message or mail will come then respective icons on the homescreen red list * on them if they r not answered How to do the same thing for the application that I developed to send n receive messages. I mean if no msg
Is anyone out there who can tell me how to start cmd with administrator rights in windows 8? I tried to open it by clicking at the bottom right and clicking cmd (administrator)... But it did not work... Another method or solutions... Please help me o