NTVDM. EXE error because Windows Update yesterday
Since the last version of Windows XP update yesterday, two of my eight computers will not open my program back. I get a message: NTVDM. EXE has encountered a problem and needs to close. AppName ntvdm.exe. AppVer 5.1.2600.5512. ModName kernel32.dll. 5.1.2600.5781 ModVer; Offset 00012afb. This problem is not consistent on all my computers, but is still a big problem for me. Love some tips.
I want to thank all of you for your time and your thoughts. This is what took place:
(1) before I dive deeply on the question, I did an image of the hard drive in question. I took the original disc, step by step repair of Windows, and on the last restart, the system could not load anything on the desktop, or pull up the Windows Activation Wizard. I then proceeded in the service of Microsoft's response and intensified in grade over several sessions and many hours. This path has never produced fruit.
(2) I took the other disk "image" and had two technicians to address them without success. I also did all of your suggestions.
(3) Finally, I made a new image a month ago since my last Backup Exec from Symantec. I did a scan of the CFS and installed 17 updates one at a time. The KB2707511 was again the culprit, and it is removed and hidden. I found it interesting that KB2707511 was not part of my series of update of original disc, but it appeared on this reconstruction of the hard drive.
Lessons learned:
(1) never delete restore points.
(2) not to do a Windows repair without corresponding to the level of the disc at the level of the windows installed - ala remove Service Pack 3
(3) Although the software is a pain, stand the Symantec Backup Exec.
(4) you tech guys are very generous and a great help.
Thanks again,
gfgman
Tags: Windows
Similar Questions
-
I can not also with ntvdm.exe. I'm no computer expert. The message said: "16-bit MS-DOS subsystem" (this on the header of the window). Then the message is C:\Windows\sustem32\ntvdm.exe error when defining the application environment.
I already did a sfc/scannow and Windows Resource Protection did not find any breach of integrity.
I'm trying to run an application on this website http://www.ray-ban.com/international/science/virtual-mirror.
I'd appreciate any help.
Best regards
original title:ntvdm.exe. disorder
Hello
You are able to use your applications without problem?To check what is causing the problem, try the following steps:
1:NTVDM method is bound to display drivers for nVidia.I suggest you to update display drivers on the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Method 2: Clean boot
Put the computer in a clean boot (namely if any third-party software hinders the process)
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.Note: After you find the program causing the problem, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup.
3:Disable method and then check the firewall/security software on the system tray.
Note: Activate the security software after the test -
Initial version of updated title: windows
My "Windows update" is not updated. The problem started recently and its shows the error message "Windows update canoe currently check for updates, because the service is not running. You may have to restart your computer "." I tried it with several reboots, but there still is not up to date. Kindly help.
Hello
Have you made changes on the computer before this problem?
Method 1:
Troubleshoot problems with installing updates.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 2:
Try the procedure described in the following article and check the status of the issue.
http://support.Microsoft.com/kb/822798
Restart the computer and check it please for windows update.
Hope the above information is helpful.
-
have tried to use windows update and get the following error message: Windows update cannot currently check the updates, because the service is not running. You may need to restart you computer. I rebooted several times. Any help would be greatly appreciated as I am not very computer
Original title: update windows
Solution 1:
Try this: http://helpdeskgeek.com/windows-7/cannot-run-windows-update-on-a-windows-7-pc/
Solution 2:
You can try to stop and restart the Windows Update Service (wuauserv). Open a command line window (run as administrator) and enter the following lines:
net stop wuauserv
regsvr32 %windir%\system32\wups2.dll
net start wuauservIf this does not help, try Microsoft Fix It service to reset your Windows Update components:
http://support.Microsoft.com/kb/971058/en-us
I hope this helps.
-
My Sirius internet Player multimedia radio is not working properly because Windows updates are installed on my pc. updates KB971486 KB974455 KB974571 KB975467 KB975517 KB974155 KB976525 KB974470. Tested internet radio/media player for sirius on another computer and there is no problem. Have tried all of the fixes recommended by sirius... This update of windows seems to the source of the problem.
Does anyone have an idea with security update could be the cause of the problem? Should I uninstall this? If I find one that is causing the problem, how can I block it to move again?
Thank you
Hi Smwall,
Welcome to the Microsoft Answers site!
Do you have a particular error when you try to play?
Method 1:
You can try to start check and clean boot if the problem persists. Clean boot boot will help you know if all the background programs conflicted with the player. To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
The steps to perform a clean boot are given below:
1 log on to the computer using an account with administrator rights
2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue
3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all
Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility
For more information about the clean boot, follow the below given link:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
2. on the general tab, click the Normal startup option, and then click OK.
3. When you are prompted to restart the computer, click on restart
Method 2:
You can try to uninstall the updates one by one in the windows update window and check if the problem persists.
To uninstall the updates from windows update:
1. open installed updates by clicking the Start button.
2. click on Control Panel.
3. click on programs
4. under programs and features, click view installed updates.
5. click on the update that you want to remove, and then click Uninstall.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
For more details, visit the below given link:
Remove an update
http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update
Method 3:
Alternatively, you can hide the update, which does not allow the player to play.
Follow the below given steps:
1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
2. do one of the following:
· Click the link that tells you important updates are available if you have some updates to hide.
· Click the link that tells you optional updates are available if you have optional updates to hide.
3. Select an update that you want to hide, right-click, and then click hide update. Do this for each update you want to hide.
4. click on OK.
For more information about Windows Update troubleshooting visit the below given link:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Code800F900 'unknown error in windows update' trying to download windows vista service pack 2
try to download windows vista service pack 2. Last update was on May 21, 2010. For a few weeks or months, the computer can be terribly slow. Often a hard drive rattle sound. For this, I tried anti-spyware, last week I installed and ran AdAware from lavasoft. It found nothing except two small cookies. A few weeks earlier, I had done the same thing using windows Defender. Also nothing. Along with a check disk hard I did not find much either. What end of the lifecycle for this computer, now about 3 years? He was one of the first available vista computers. Thank you for your help, Peter
* Original title * Code800F900 'unknown error in windows update', try to download windows vista service pack 2__I have an oem version purchased with HP model s7720.nl
Why did you delete your post where you said that Norton application has been installed at some point in the past?
There is nothing wrong with the guarantee of these forums, but I'd be willing to bet that there is something VERY wrong with the security of your computer!
Let's cut to the Chase. See...
Cleaning a compromised system
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxPersonal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!
HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxTip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029
NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeSee also:
Risks & benefits of P2P file sharing
http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspxMeasures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxIf you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads
If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Hello
I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday. To do this, that every time I try to start the system.Whenever I try to start it gives options to start in safe mode, safe mode with network, safe mode with prompt etc., but all these options find you on the same blue screen with the error mentioned above, then it tries to restart with the same behavior over and over again.
Any guidance will be appreciated. Thnx Nick
Hello
If you meet this new,
http://mikemstech.blogspot.com/2011/12/troubleshooting-0x50.html -
Whenever I log in I get an error message "Windows Update has stopped working".
original title: everytime I log in I get an error message "Windows Update has stopped working". I tried a manual update as well and it does not work.
In details, the error message is:
Signature of the problem:Problem event name: BEXApplication name: wuauclt.exeApplication version: 7.4.7600.226Application timestamp: 4a7b870bFault Module name: StackHash_6bc7Fault Module Version: 0.0.0.0Fault Module Timestamp: 00000000Exception offset: 00404968Exception code: c0000005Exception data: 00000008The system version: 6.0.6001.2.1.0.768.3Locale ID: 2057Additional information 1: 6bc7More information 2: f3f6a1403802118ada460cd45530935bInformation additional 3:6477Additional information 4: d34edb9b57aa7d1aac3252e1a9591198HiTunnywig,
(1) since when are you facing this problem?
(2) are - what you remember for change?
Wuauclt.exe rest reside in the background and checks the Microsoft Web site for updates to the operating system. Originally, wuauclt.exe is a legitimate system process, which is located in C:\Windows\System32, but there are cases where wuauclt.exe is actually a disguised virus, Trojan or worm.
Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2: Put the computer to boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Method 3: Run the fixit available in the article below to reset the Windows Update components
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
How to back up and restore the registry in Windows -
Whenever Norton runs a scan of the live update I have the following message and am not sure how solve the problem - error 800b0100 Windows Update encountered an unknown error runtime security update for Windows Vista (KB967723). What can I do?
Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100":
http://support.Microsoft.com/kb/956702Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I get the error message: Windows update 0 x 80070490 (2015-08-18-T-10_48_47P) not corrected an error when I install Windows updates. How can I fix?
Hello
I apologize for the delay in responding.
This error means that a file (CBS Manifest) that is needed to install updates is corrupt. I suggest to try the procedure described in the following Microsoft Support article and check if it helps. This article consists of the steps to troubleshoot and correct this error.
https://support.Microsoft.com/en-us/KB/958044
For more information, you can consult the following Microsoft Help article.
http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80070490#1TC=Windows-7
Please do not hesitate to visit our Web site for any help with the Windows operating system.
-
43 after device error code Windows update application yesterday.
After that Windows application updated yesterday, Windows disabled my Nvidia GeForce 6800 graphics with code 43. I reinstalled the latest Nvidia drivers, but the error persists. I tried to uninstall the update, but still the Windows system restore fails no matter how far back, I try.
Error code 43 is a driver error. Did you install optional updates Windows (such as the graphics driver)? If so, uninstall the graphics driver update, reboot and reinstall the Nvidia driver.
Never be afraid to ask. This forum has some of the best people in the world to help.
-
I'm trying to remove Pending.xml from winsxs son. When I click on remove it says I need administrative privelages. Please help me, I'm doing this because I can't get windows updates, I havee windows Vista 64-bit edition family. Help, please!
Thank you
Jetta
Try this first.
Ensure that the pending operations are completed
Try a reboot. Before restarting the service (installer of Modules of Windows DisplayName) trustedInstaller to automatic started. Normally it is manual, except if an operation such as windows update requires an installation of starting time.
Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).
trustedinstaller sc config = auto start
Then restart
Then remove the type in a command prompt as above
del c:\windows\WinSxS\pending.xml
or Start - All Programs - Accessories - right click, run as administrator - Windows Explorer.
It's my full post on WinSxS
WinSxS folder
The WinSxs is the central repository of records for Windows. All installed files are placed in the WinSxS folder, including updated files up-to-date. So, you will have a lot of different versions of each file, allowing you to roll back service packs and Windows updates to a previous state.
The current version of a file is hardlinked to the appropriate place in the rest of the file system. A hard link is a file name. All files have at least one hard link. Windows system files (usually) have two links in hard, one in WinSxS and one in c:\windows\system32. The two names pointing to the same bytes on the disk.
As the files have two names, they are counted twice by Solution Explorer, once once of WinSxS and System32.
There are other uses for it as well. It allows several programs to use different versions of DLLs.
Ensure that the pending operations are completed
Try a reboot. Before restarting the service (installer of Modules of Windows DisplayName) trustedInstaller to automatic started. Normally it is manual, except if an operation such as windows update requires an installation of starting time.
Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).
trustedinstaller sc config = auto start
Then restart
The system update tool
Ensures the consistency of the folder WinSxS (Side by Side).
http://Windows.Microsoft.com/en-AU/Windows7/what-is-the-system-update-readiness-tool
For 32-bit Windows
http://www.Microsoft.com/en-US/Download/details.aspx?ID=504
For 64-bit Windows
http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540
To see the results click on Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).
Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log
Then delete this folder to recover the 100 MB.
del /s "C:\Windows\CheckSur".
Start the scavenger
Add or remove a feature from Windows Control Panel - programs and features launches cleanup on Vista.
The sizes are not what they seem
Generally, WinSxS files are hardlinked. A hard link is a file name. Each file has at least one hard link. Files in WinSxS and system32 usually are hard links to the same file. Therefore, you count twice the same file in system32 and WinSxS.
-
Windows Update error code
Hello
I suggest to reset Windows Update components and check if it works. Check out the following link to do the same thing:
http://support.Microsoft.com/kb/971058#appliesToI hope this helps!
-
Error code Windows Update 800700 B & System Restore 0x80071A91 error
Cannot install critical system updates. Download the update error 800700B. Manually and through MS FixIt ran the command fsutil resource setautoreset to clear/clean line newspapers. Has not fixed the problem. Through research found related error on the system restore. Am unable to create a restore point and 0x80071a91 error. A run the command-line recommended by MS to address, cd /d %SystemRoot%\System32\SMI\Store\Machine
attrib s h *.
del *.blf
del * .regtrans-msand get an access error:
C:\windows\system32\smi\store\machine\schema.dat{d3e605ee-4C71-11de-be3f-001d609310af}. TM.blf
The process cannot access the file because it is being used by another processAny ideas?
Currently no anit-virus software, but recently (within 2 months) not uninstalled Mcfee... I'll try to get more details from the owner about the software was previously installed Antivirus
You don't have to bother. This is not good. :(
See...
Help: I got hacked. Now what should I do?
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxBackup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!
HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3
After the new installation, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network and before using a USB (flash drive) or the SD card that is not brand new, or has not been freshly formattedotherwise:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxNB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application. [1]
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe==============
[1] I recommend Avira AntiVir & Microsoft Security Essentials (both free) and NOD32 & Kaspersky Anti-virus (not the "suites").~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Automatic update of Windows was put on 'On' on the morning of November 13, 2013, when I received the notice of Microsoft system tray that updates of Windows patches were ready to be installed on my computer (XP sp3, IE8, MSE).
Updates proceeds to installation with the updated bars before the normal close.
Updates is apparently blocked at the first update. I let it run for about 15 minutes before I made a hard stop. I thought that maybe I had lost to the Internet because the update seemed stuck on the first and took too much time, it seemed.
Next start, computer slows almost stopped after a few minutes.
Guilty is svchost.exe SYSTEM alternating between 95 and 99% of my system resources. I turn it off and computer returned to normal.
Has done research on the web, stop automatic updates and processor svchost problem disappeared, unless I went to Microsoft updates and svchost.exe Web page re - would seem to consume almost all of the CPU resources while bars update Microsoft constantly scanned my system for the latest upgrades necessary.
Spending a day to try various fixes posted on the internet. A Microsoft Fixit said that he there had errors in the update and fixed all but one saying registration number was bad (said he couldn't fix that). Despite everything, still the same problem.
On the same day, an error was unable to update the definitions of virus on MSE, but for some reason, the next day (14) updated crossed.
Update: some progress: I leave svchost cogitate on the webpage update from Ms. After about 1/2 hour, the updated hotfix list showed. I tried to install it, but not updates managed to install. I am currently re - try, as suggested on the Web page.
Also tried the command "net stop" method mentioned in several places, as a tool of Malewarebytes Anti-Root running. Nothing.
Tried the fix for IE8 security as suggested, nothing.
Tried system restore, but I must have something wrongly configured with it because it was not able to restore any earlier date, I took. Bad luck.
Never had a big problem with my set-up in all the years I've been running XP sp3, until now.
Next thing I'll try is Park on the side of Windows Update for an hour or two, with the idea that maybe my processor is in need of more time to digest something.
I see that others have had this problem, but not necessarily with patch release on November 12.
UPDATE: some progress, perhaps. 1/2 hour parked page update of Windows, with SVChost churning away, and I got a list of patches. I tried to install, but all of them failed to install. I try a re - install, as suggested.
Let me propose a summary of how to fix the MSE / Windows Update problem and the svchost problem:
1st thing to do is to disable the automatic updates window. This will keep your computer against svchost.exe freeze for now.
2nd, follow the instructions in Xircal to check that you have "BITS" listed in your list of "services". Correct it if not.
3rd, IE remove it from your list of programs, and then reinstall it, making your first update of the IE rollup, as suggested previously.
That he "should" do and you can activate the automatic updates on svchost.exe should return to normal. Proceed with the update of Windows and MSE as usual.
Maybe you are looking for
-
Broken HARD drive and no recovery disk
Hello, everyone! My husband bought a new laptop a few months before and the fact that US aircraft not only any what rescue DVD, we na not create a restore disc, understand us, that we had a lot of time... Except that yesterday one of the dogs was cau
-
I disabled iCloud Photos because I have no space left iCloud. Even if I turn it off, the photos that I already have on my device (and any future image) still on this phone? Or if I do not support until a separate place I lose all?
-
Alias to hide in the partition
If you are willing to write a partition "condensed", avoiding all the rehearsals verse and the chorus , drawing score repeat bar instead, according to the User Guide symbols (Chapter 20: view and edit music notation/display edit alias and in the scor
-
HP: maximum ram on hp 15 r263dx
I would like to upgrade RAM in my new computer HP laptop
-
FT2232HQmini control with I2C in LabVIEW
Hello is there an example works with a FT2232HQmini in LabVIEW? The bus is an I2C bus. Thank you Best regards, patrick