NULL to follow the path of the form a mask

Similar Questions

• Error: not able to analyse the form of mask on Clipboard

  can someone tell me why when I opened a new composition, I get an error message that says: "after effects error: could not parse the form of mask on clipboard" then I click ok... which brings me to a new composition, then I try to import an image and it gives me the same message only is not import the image? IM new to this and trying to teach myself, any help much appreciated woould

  This has to do with a pixel-image on the Clipboard of the AI. Even if you are trying to paste in AE, AE generates an error. It should give this error until the user actually attempts to access the Clipboard, in my opinion.

  After I rebooted my system, it has been resolved. Workaround must be (not tested) to copy some vectorshape the Clipboard to HAVE to get rid of the pixelimage.

• Structure of Javascript and XML in the form of masking

  Hello

  Is there a way to hide Javascript code in the form of people who have Designer?  I design a form for a client that will be downloaded on the web and completed.  They do not, however, want to see the backend code with the designer or the structure of the XML data in the form.

  Thank you!

  Yes, you can put a password behind it.

  Data file /-> properties-> Security

  I don't know if this way is quite right... because I have no English version of LC. But you should be able to find good

  I did the same thing... but had to cut the password later since it has been classified as 'viral' so I had to shut off again

• Bug in dialog box "... the form" adjustment of the mask?

  I just posted this in the Adobe bug report, but wanted to make sure it is a bug of software, not a personal fault. Did anyone else encounter this problem and have you found a solution?  Thank you!

  Problem: Definition left and right side a rectangular mask to the same number in the mask dialog box "Form."... "causes the mask to be unusable.

  Steps to reproduce the Bug:

  1. create a new model of px 500 x 500, new comp solid size and double-click Rect. mask tool to create a full size mask.

  2 adjust the mask using the "Shape" dialog box to set the left and right to 250. Output dialog.

  3.re - enter in the dialog box and try to make any changes to the left and to the right, or try to reset the rectangular box.

  Results:

  The changes will not be saved out of the dialog box.  This is the case when you work with keyframes or not. It should also be noted that if a mask is done this way, then a new keyframe, the mask is "reset", the shape will not change, but I noticed that points are.

  It seems that when the mask sharing the left and right sides identical, it confuses the points and cannot properly open the mask up.

  Hi Greg,.

  I saw your bug report and was able to reproduce the problem.

  The problem occurs only when the left/right or up/down pairs have exactly the same value. Changing the value of the left or top will also change the law or low value, respectively. and change the value to the right or bottom is not saved when you OK from the dialog box.

  My hunch is that this bug is related to the logic in the form of mask Panel that corrects the values so that the left value can never be greater than the fair value or the value never greater than the background value. (This logic ensures that left is always left or right and top are always above the background.)

  This bug seems to have been in After Effects at least several years (9.0 or a previous version). Anyway, apologies for the disruption.

• Form of mask for path problem

  So, I'm probably doing something stupid, but here goes.

  I have imported a null and drew a shape with the pen tool.  Then, I clicked on the shape of the mask and copied.  Finally, I stuck to the position of the Null value.

  So, what happens is that both the original shape of the mask and the path then shift in different directions, or who are where I drew at the origin of the shape.

  I tried this on when everything was 2D and where everything was 3D, but I can't make it work right.

  Any thoughts?  Thank you.

  Your workflow is obstructed to the top because you expect to have the mask with a stay of layer while the position of the layer is changed.

  Try your mask path of drawing on a solid that is the same size as the model and make sure that the scale is set to 100%. Then:

  • Set an image of the unique key for the mask path holding doen the key Alt/Option and press M
  • Copy this key frame
  • Set an image of unique key for your null by selecting the value null and pressing Alt/Option + m, and then paste.
  • The null exactly follow the path on the solid layer.

  Transform a mask path to a path of position will not work correctly if the layer is scaling. Using the keyframe trick ensures that you will always have the success of converting a mask path to a path of position.

  If you copy a layer mask and then paste the path as position will change the data on the same layer mask position and moves the shape layer. It is a normal behavior. If you want that the mask path to stay in the same place in the comp you can not move the layer without changing anchor. or use the Pan tool behind. To make your workflow works, you must keep the Null value in the same position by adding the path data to the position and by using an expression to reverse the position for the anchor point data. This would defeat the motion of the null value.

• Solid and sketched movement Null follow the same path, but in different places.

  I'm editing on After Effects cs6. First, I will describe two situations and what I 'm able to do it, then I will explain what is the heart of the problem.

  First situation: when you use 'motion tracker', I'm going to "Change the target" of a null I titled 'Tracker '. As you know, this will allow my null to track movement on caterpillars and synchronization with the movement of my video. It worked well.

  Second situation: Let's say I have a white canvas and simply stick to a null value. I take this null and draw a few sketches everywhere motion that I love. Then I take a solid. I have an effect as an 'Individual' to this massive. Now, if I take the "XY Position" of this effect and make a selector to the position of my movement sketched null, the effect will now follow the path that I have outlined. It worked as well.

  My problem: I tried to combine the two situations above, in order to get my movement sketched special effect for synchronization with the video track. I tried this by first taking of null value "Tracker" my goal for motion tracking (1st situation). Then I sketched movement a 2nd null. I pick whipped this 2nd null for "Tracker" and the sketch to synchronize with my video successfully obtained.

  HOWEVER, once I tried a particular effect with the path of my sketch of movement of synchronization (2nd case), I found what happens: my particular effect was indeed following the path of my movement sketched null, but it was displayed in the upper left corner of my screen, WAY OFF from where my movement sketched null has been placed in fact. So sketched movement null and the special effect were both the same way, but not in the same place.

  My question: How can I synchronize my effect go exactly where I want it (with a null value of movement sketched) and still get it to follow along with my video? I know it's difficult to describe without showing it directly in person, but I hope it's a simple question that has a simple answer with him.

  Mylenium

  As described in my first post: when pick - whip sketched movement Null Null in Tracker, following the path outlined particular effect, but was suddenly moved to another point in the frame.
  
  However, there was a simple solution to this problem after all. For those who are interested, once the setting of Position XY of the particular effect pick-whipped in the movement sketched Null, not NOT-selector of the said Null value Null of Tracker. Instead, pick - whip solid [which has the particular effect] on the Tracker Null toured and everything is aligned.

  But thanks for the idea!

• How to effectively check if a field in the form is not null

  Hello

  I'm guessing there's a way to programmatically check if a field has been entered during the loading of the form.  A sort of loop should do the trick...

  I tried to use the following code (from dohanlon for another purpose) which must run through all fields in the form, but I can't plug it in an if/else statement or even check for any value non-zero.

  xfa.resolveNodes (' form1... #field [*] "" ');

  Conceptually, here is how I like to do:

  If (xfa.resolveNodes ("form1... #field [*------]".rawValue!)) = null) {}

  Do it

  }

  Basically, I'm just checking if any field is not null, then I can "do something".  I know that I can't use it to check .rawValue but I can't think of anything.

  I'd appreciate any help (as always).

  
  

  Hello

  I prefer loops, because you can build in a little management as well as errors.

  See an example here: http://assure.ly/H1ksGR.

  Hope that helps,

  Niall

• Art brush not following the path

  I have an art brush I created to achieve an offset on an open path.  In some place the brush does not follow the path.  I have attached a picture.  The thin pink line is the actual path.  The thicker pink line is the art brush I created for the offset.  You can see at the top of the image of what the style is supposed to look like.  Once the road starts to bend down, the path and the brush out of alignment.  I tried to add points, which works on other types of brushes, but doesn't seem to work on artistic forms.

  Can any ideas on how I fix?  Thank you.

  

  It sounds like you did not have a suitable model brush. You must be particularly careful. Basically, it should look like this. I left the invisible lines in it. You don't need them, but you need the invisible rectanlge around each element (emphasis on purple items):

  

• Where should I add the path to the bottom of librearys loaded before working on the form

  Hi all
  
  
  It's Narendra.
  I'm working on oracle technical applications.
  
  I have worked on reports, have little knowledge about the forms.
  
  After Instaliation before working on the forms, must be charged librearys in of local mechian and add this path to somewhere.
  
  (1) where should I add this path?
  (2) where I add down load this librearys?
  
  
  Kind regards
  Narendra.
  [email protected]

  Narendra,

  If you want to open an Oracle Apps with Forms Builder form, then proceed as follows:

  -Copy all the files of pll, TEMPLATE.fmb & APPSTAND.fmb of $AU_TOP/resources on your local computer (C:\ABC)
  -Add (C:\ABC) to FORMS60_PATH in the registry (HKLM > software > Oracle)
  Open/Close Forms Builder
  -Open the form

• Windows Search find files but the mistakes of some of them, which are open normally when it is accessed to follow the path of the error opening

  My client uses Windows Search to help track the files in a fairly large groups. Indexing and everything seem to work very well, but when the user performs a search, it returns the information that are expected, but when you click on some of the files that it generates this error:

  "Cannot find 'file:///s:/XXXXX/XXXXXX.pdf'. "Make sure that Internet address or pat is correct.

  (where XXXX/XXXX are the path and name, of course. It varies and is not a specific place, or all in the same places is originally the same error)

  Varies depending on the issue and the only consistency I've found is than that error all tend to share the same name of 'Owner' and those who work divides different. Yet once again, the 'owners' vary. When browsing directly on the elements, following the exact path in error, the files open fine. In our case, 's:' is a mapped network share, but which seem to be the question either, as the other files in the search located on the same mapped share and in the same directory path work very well.

  To make it even more confusing, the search of all works perfectly on another computer. All users have the same access right, reading/writing/execution, in the cases in question. The file doesn't seem to be open and in-use by other users.

  The system in question is running Windows XP Professional SP3 and is connected to a domain active directory running Windows Server 2003. We have tried to do, and it did not help.

  Any ideas? Thanks in advance for anything that can help you!

  -Sean

  Hello Grouchy_M,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the category of server on Technet. Following your question thanks for posting the link below:

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Path creates the form outside the

  Hello!

  I am doing a logo "The Voice". I traced the outline with the pen tool. But when I convert it to a form, it creates a shape on the outside, not inside.

  How can I make the way to make the form inside?

  

  

  Thank you!

  I think that screenshots should have include the Trace Panel.

  When you select the path with the pen or some other tool associates discover path operations in the Options bar and set them as you want them to be.

  

• How to remove the full paths in the form

  Hello!

  I'm new to illustrator but I saw these files on fotolia.com, I wanted to create this type of design, but I wanted to know the way how to remove paths to complete the form or just the anchor points

  

  In this context, a shape like spiral is created, but how the designer shaped. All circles are full. This form is not created just by creating the spiral shape and then creating clipping masks because all the circles are full. Is there any script or not in illustrator, I could do that.

  Any help would be appreciated. Thank you.

  Usually, I'm a big fan of doing the thing using only appearances, but in this case, I'd go with an approach of several paths:

  

  

  So have several brushes applied to some of the paths

  

  Who should multiply, I forgot in the example.

  The brush is so much like

  

• Text bridge will not follow the actual path, says cannot download file

  Im trying to use the path of the text of pipe, but it will not follow the actual path. When I tried to open it with bridge he says cannot download file, not taken in charge or extension file type

  There is a bug in AE. To work, cut the track that she strives to follow and then paste this path on your layer. I think it was workaround.

• I'm filling out a form that is available on a site. When I click on the option to fill out and submit the form 'online' a pdf document is displayed in chrome with the following text "to display all of the content of this document, you need a later version

  I'm filling out a form that is available on a site. When I click on the option to fill out and submit the form 'online' a pdf document is displayed in chrome with the following text

  «To display all of the content of this document, you need a later version the viewer PDF.» You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html for further support, go to www.adobe.com/support/products/acrreader.html"

  Needless to day, I installed the latest version. I even reinstalled using the link in the message, but nothing helped. Whenever I click on the link to go forward, I get the same message. Question: (i) is it my PC/software (Vista), (ii) is the site where I'm trying to submit the form, or (iii) is it the software acrobat reader. Note that I used successfully the last version to fill out and sign forms.

  It is none of them. It's Chrome, which is ignoring Adobe Reader and showing the message.

  Solution: just save the document (with the message) to your desktop. Then open it in Adobe Reader. The 'real' should then display.

• I created a form.  I want to just fix the form of an email, send to be completed by the customer, the customer save the form and email completed for his back to me.  I don't want or need follow-up.  The way I understand adobe procedures is

  How I underdstand procedure with Acrobat Pro DC, it's that I first have to distribute the form.  The client cannot save the form, unless I do it, and then I send the form distributed to the customer.  On the side of the user, I think it will confuse most of the clients that I work with

  There are two ways of submitting the form by e-mail without using Adobe distribution methods and each method has some problems.

  The easiest way is to create a 'normal send button' and set the URL of submit button to point to an email address as "mailto:you[at]domain.com". You need to enable rights of use on the PDF file in order to receive all of the PDF document in your Inbox; because Adobe Reader users are limited to show only data formats (FDF, XFDF and XDP, XML, HTML) only. This method is very reliable; because submission will fail if end-users have not properly installing the software side mail client by default, or if they use the webmail.

  The most reliable method is to define the button submit to point to a script on the side of server such as ASP.net or PHP; because the script bypasses software email client-side and sends the request through a SMTP server. Both methods require that the end-users to submit using Adobe Reader or Adobe Reader browser plug-in. Integrated PDF by default "spectators" of the browser are not able to submit PDF forms, they may not read rights of use of Adobe, and they are not compatible with LiveCycle XFA forms.

  Do you know what type of PDF you use? Acrobat, LiveCycle XFA or XFA dynamic static

  You have a web server? If so, is this a PHP Apache or Microsoft ASP.net host?

  Visit the following Web site for examples of script:

  www.pdfemail.NET/examples/