Similar Questions

• number format for excel

  Hello

  My problem is to convert my numbers into a format correct excel. numbers are saved in a spreadsheet and with a Publisher file, it looks like this:

  9, 723197E + 0

  8, 229011E-1

  When I filled out an Excel file with the data, it looks like:

  9723,00 and 0,823.

  I tried different things to fix the problem but nothing helped.

  Can someone help me?

  Markus

  Hello Markus,.

  I have two things you could try - helped so much for me. But I would strongly recommend a Cope of the VI, you will have to change, in case that you need the original feature.

  (1) open ...\national instruments\LabVIEW 8.x\vi.lib\addons\_office\_excelsub.llb\Excel_Insert_Table.vi

  (2) remove the two nodes of property Range > value so that the VI looks like the screenshot attached "I.jpg Excel."

  (3) you can additional place a "string of Frag/Exp to number" - function in the VI (see screenshot "Excel II.jpg")

  But I repeat, please make a copy of this VI and save it in a different folder before you make these changes.

  Concerning

  Johannes

• Number format for monetary values of shorthand

  Hello
  
  How can I format monetary values shortened?
  
  IE how do I view 12500 12.5, 2700 as 2.7, 700 0.7 etc?
  
  I tried using various masks but cannot get the results I'm looking for
  
  Thank you
  
  J

  This?

  with my_tab as (select 2700 col1 from dual union all
                  select 12500 col1 from dual union all
                  select 700 col1 from dual)
  -- end of mimicking your data; USE SQL below:
  select col1 / 1000
  from   my_tab;
  
   COL1/1000
  ----------
         2.7
        12.5
          .7
  

• Number format not valid in the data transfer Assistant

  I'm trying to download data from a CSV file in a table via the download data wizard. However, it always seems to fail on some lines with an error "invalid number format". Even if I stick one of these lines in the wizard, it still does not work. There is nothing wrong with the data, and I can do a regular insert Toad with no problems.
  
  The data are:
  28126238,101, RM, 29/01/2011
  
  The table looks like this:
  CREATE TABLE STR_PROD_UPLOAD
  (
  NUMBER OF PROD_CD,
  NUMBER OF STORE_CD
  CHARACTER VARCHAR2 (10 BYTE),
  DATE OF REPL_START_DT
  )
  
  It works very well on Toad:
  INSERT INTO STR_PROD_UPLOAD)
  STORE_CD,
  PROD_CD, line, repl_start_dt)
  VALUES (to_number('101'), to_number('28126238'), 'RM', to_date('1/29/2011','MM/DD/YYYY'));
  
  Anyone have any ideas on what might be wrong or how I can go about the matter of finding?
  
  FYI - evolution STORE_CD of a varchar2 and PROD_CD solves the problem, but I would like to know if it is possible to solve this problem for later use.
  
  Thx John

  Hi John,.

  For some reason, I get the same error. However with the download of the data, you can still provide you own number format in the case where the application could not a defined automatically. In your case, using Date / field number Format (for example: 99999999) will force the system to use the supplied format.

  Concerning
  Patrick

• I'm looking for a list of commands/syntax for number formatting. Example of ^ 1, ^ #, ^ t, etc...

  I'm trying to find a list of command/syntax that can be used in number formatting (bullets and numbering - style - dial number field).  I found a few examples, but I keep a list of available commands.  I searched, but was unable to find it.  Presumably, I'm using the wrong search terms.

  I don't think, because these are only a few. In the automatic numbering of the paragraph style settings dialog box, you have a drop down menu where you can select the formats that are then entered in the form of these shortcuts.

  

• Numbers automatically selects the "date format" for cells.

  Numbers automatically format selects 'date' of certain cells.

  I need "numbers."

  I want to calculate simple interest due on the amount, the interest rate and number of days.

  When I input "number" format of the result cell and calculate the amount * rate * number of days divided by 365 always automatically shows something unwanted and the format "date." Furthermore, I'm not able to change the AutoFormat ("date") in "number".  How to bypass this automatic selection?

  Thanks in advance

  UbiUbu

  Maybe you can share what, exactly, you enter in a cell.  A screenshot is also useful.

  

  Here's a way to do what I think you want:

  Enter amounts in cells B1, B2 and B3

  Select cell B6, and type (or copy and paste it here) the formula:

  =B2*B3*B1/365.25/100

  shortcut for this is:

  B6=B2*B3*B1/365.25/100

• Number format Excel 2003 XP3 hurt after the upgrade to Windows 7

  No other changes made so have to assume this is connected to upgrade Vista Home Premium to Windows 7 Home Premium (32 bit).

  Open Excel, and then type the numbers in a cell, press return and they display badly. Example:

  Type in 4828327059196003 and displays it in the form

  4.82833E + 15

  (Although if you highlight the cell, it displays in the formula in the form 4828327059196000 bar)

  Cell format is the default 'General' value, which is (and always has) accept as typed numbers.

  The problem was reported a few years ago. I also asked a friend who uses Windows XP what will happen after the collage of this number, and it is also automatic format in scientific format for him. Then...

  The problem is not related to Windows 7. It's something else... And I can not even find a solution. Sometimes you can find some tips to create a macro that allow you automatic formatting the text value.

  If you enter a unique value you can also be preceded by a single apostrophe ' so it will be represented as a string value (apostrophe will not be displayed)

  Also you can try this (because it is simple to change the text format works do not) > select the range of cells > open in the menu data > choose text to columns > Next > Next > select the text option > Finish

• "BOLD" format for fields

  Hi team,

  I have the following screen.

  I need to format the "status" and "First to know" fields with the "BOLD" format. I don't need the word 'Status' not the word "Taken".

  

  I have a following code:

  / * Format for text * /.
  Police font_bold_title = this.getFont () .derive (Font.BOLD);

  _first_aware_title. SetFont (font_bold_title);

  _status_title. SetFont (font_bold_title);

  Add (_firstAwareField);

  Add (_Status);

  Any suggestions?

  Please refer to this sample.

  Comment - formatting text in a RichTextField
  Article number: DB-00124

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800345/...

• Column/data varchar but req number formatting when digital.

  Hello

  I wrote some sql to retrieve data from our Oracle database.

  Number formatting is a bit unfortunate.

  The column reads:

  1 000 000

  0.010

  1 000

  0.0009

  9999999.000

  -

  null

  > NWG

  If its not all of the numbers, but if it is a number, I need to correctly format i.e.

  without decimal places if they are just led 0

  I hope that there is a regular expression that I can use to format numbers ignoring the character entries.

  Any suggestions?

  Hello

  Whenever you have a question, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the accurate results you want from this data, so that people who want to help you can recreate the problem and test their ideas.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

  What do you mean by "if it's a number"?  The following could all be considered numbers:

  • -1
  • -1.2E + 3
  • $9,987,54
  • 123 456,7
  • 3/4

  Depending on what you consider a 'number', you can use expressions regular, perhaps combined with other string manipulation functions, like to TRANSLATE.

  You can consider a function defined by the user who tries to convert it to a NUMBER, but never to raise an error.  See How to determine if a Varchar2 string has characters from a to z?

  Which type of formatting you want for the numbers?  You said that you don't want to end ' 0 decimal, but how about a trailing decimal point?  When you post the sample data and results, examples of all individual cases, you want to manage.

  You may need TO_CHAR and then some channel, for example, RTRIM or REGEXP_REPLACE mainpulation functions.

  As you realize you probably now, it's a really bad design.  You let people in chains that may or may not represent the numbers, then, much later, trying to guess the whehter they meant it to be number, and if so which COMP.  Guess, isn't a very good way to solve problems.  The person who knows the data if it is a number or not - make him tell you at the point where it enters the number.  For example, instead of having 1 VARHCAR2 column, you may have 2 columns (a VARCHAR2 and a NUMBER) and a CHECK constraint that requires at least 1 of them to be null.

• Model number format comma and dot (.) appear as 'u' a bad

  When I saw the pdf at the local level, the number worked well, for example '1000'-> '1 '000.00 '.

  But I run in eBS, the number format do not work, for example, '1000'-> '1u000n00 '.
  I put the number as format below:
  <? format-number: SUM_AMOUNT_D; '9G999G999G999G999D99 '? >

  I also change the format of '9G999G999G999G999D99' to ' #, #, #, #, #. 00'. it still does not work.

  Help, please

  Thank you

  KP

  Model number format comma and dot (.) appear like 'u' and ' don't (Doc ID 760434.1)

• number format

  Hello

  on 10.2.0.4

  I treid the suite, but not an explicit display of

  SQL > select file #, status, checkpoint_change # from v$ datafile, whose name like '% SYS % ';

  STATUS # CHECKPOINT_CHANGE #.

  ---------- ------- ------------------

  1 1.9475E + 12 SYSTEM

  3. RECOVER 1.9475E + 12

  17 RETRIEVE 1.9475E + 12

  18 RETRIEVE 1.9475E + 12

  SQL > select file #, status, TO_CHAR (checkpoint_change #, '$99 990,99') v $ datafile where name like '%sys% ';

  STATUS # TO_CHAR (CHE

  ---------- ------- -----------

  1 SYSTEM #.

  RECOVER 3 #.

  RECOVER 17 #.

  RECOVER 18 #.

  SQL > select file #, status, TO_CHAR (checkpoint_change #, '99999990.000') of v$ datafile whose name like '% SYS % ';

  FOLDER # TO_CHAR (CHECK STATUS

  ---------- ------- -------------

  1 SYSTEM #.

  RECOVER 3 #.

  RECOVER 17 #.

  RECOVER 18 #.

  SQL > select file #, status, TO_CHAR (checkpoint_change #, '9999,9990.000') of v$ datafile whose name like '% SYS % ';

  FOLDER # TO_CHAR (HOSTING STATUS

  ---------- ------- --------------

  1 SYSTEM #.

  RECOVER 3 #.

  RECOVER 17 #.

  Can you help me please?

  Thank you.

  Checkpoint_change # is probably a number with more digits that you specified in the format.  You must specify a larger format (more numbers). Note: There is zero decimals, so you don't need to specify decimals.

  In sqlplus, you can also generically set numwdith 'N NUMLARGEUR SET' - for example "SET NUMLARGEUR 32" to allow up to 32 digits digital display.  Then, you need not specify a format for the column.

  Hemant K Collette

• How to remove a file in Adobe Acrobat format for the air to the iPad.

  I opened a number of files in Adobe Acrobat format for iPad. I would like to know how to remove the file when I don't need the iPad. Thank you

  Hello

  Please take a look at the following FAQ document.

  How to manage files in Adobe Acrobat, DC format for iOS

  You can change the location of the local file and delete files from your iPad.

  I hope this helps.

• Custom number format function does not return 0 in decimal form

  Hello

  My custom number formatting feature does not work. It was working fine when the site has a standard client server architecture. However, when we changed using the REST API with javascript and HTML 5 function works for most except in cases when I need it displays 0 for decimal numbers.

  Basically, the function accepts arguments a number and the number of decimals and returns the number rounded the number of decimals. Below, I've stripped naked function minimum, even I was testing.

  < cffunction = "dispCostPeriod" access = "remote" returntype = "string" output = "false" hint = "name costs for a specified period at the user" >

  < name cfargument = "in_decCost" type = "numeric" required = "yes" / >

  < name cfargument = "in_iRound" type = "numeric" required = "yes" / >

  < cfset decRoundedNum = NumberFormat (in_decCost, "_" & RepeatString("9",in_iRound)) >

  < cfreturn decRoundedNum / >

  < / cffunction >

  When I pass 55.00089 and 3, the function returns 55.001.

  When I was 55 or 55.000000 or 55.0000089 and 3, the function returns 55

  . And I need to 55,000.

  I tried both for returntype 'string' and 'digital', various masks as _.999, _.000, _. ___.

  I tried NumberFormat (in_decCost, "_.000") straight back.

  Nothing works.

  I use CF10 on Windows Server 2008.

  Any help much appreciated.

  Thank you

  Gena

  Can you explain how the data gets into the browser as a JSON string format?

• Showing the positive sign as the number Format

  Hi all
  
  Is it possible to set the number format (custom format) to show the positive with the positive (+) sign numbers in front of the number (for example, + 2, + 2.3 + 0,0, etc.).
  
  I don't want to ride the number as a string and perform a concatenation. So, is it possible to do this using a custom number format?
  
  Thank you very much!

  Hello

  You can try to use the custom format and specify as below:
  +#,###;-#,###

  I tried this in 10g and seems to work very well.

  Thank you
  Hyder

• Best file format for Illustrator and PS files be placed in the ID

  I am writing a proposal using InDesign. It will output to PDF format for circulation among members of the team; I guess they will be view on a variety of screens and some will be to print on various desktop printers.

  I have a variety of images, all in color, in InDesign, Photoshop, and Illustrator to be included in the proposal. Varies from 5 x 7 to 2 x 2. Some are quite complex with fine detail.

  I just saw the proposal in preview overprinting ID / high quality display. The images don't look great. A lot of jagged lines.

  I usually save all in JPEG format with a quality of 80-90... but it's just a habit, I have no reason or justification for this practice.

  I wonder if I should go back to the original files of ID, PS and and save it back as something else before and then place them again.

  Does anyone have recommendations or thoughts to offer?

  I use CS4 on Mac. My computer is a little underpowered for the project at hand, but I'm willing to put up with a bit of slow performance and lag if it translates into a better final product.

  Irregular line is a feature of low resolution, no type of file or an overview screen lower quality than you think that you are using. Check the display performance settings again to make sure they are really good, and if they are configured to allow object level settings, you will need to make sure that each object is also correctly.

  Beond that record in .jpeg format is always destructive. For the web, it's nice, but for printing, you should never use anything, in my opinion, but the quality parameters for registration of JPEG files, and I recommend using jpeg at all. If your picture is that all raster data (pixels) Save .psd or .tif. If she has live type or any other vector content, save it as a Photoshop PDF. In Illustrator to save as .ai or PDF with Illustrator editing capability. If you change the extension of the files PDF Photoshop PDP they open in Photoshop rather than Acrobat when you use Edit Original.

  As I said, the effects of stairs are a feature of low resolution. We often have people tell us that the file is 300 dpi, but it turns out that it is a very small dimension and the imaga is furred in ID. Both links and information signs can show you the information of resolution of your images. There will be two numbers, real and effective. Effective resolution is the only number that is important. I would like to see a minimum of 150 dpi for printing on a desktop printer, but you could get away with as little as 90 for a non-critical image. Press 300 ppi would be the rule, and a fall below 200 asking trouble.

  How the file looks like ID is not nearly as informative as how a PDF file that was exported in the file looks like, or prints. For a high image resolution in the ID you are still looking at an overview of screen resolution lower, not the actual image, because she will be out. Export settings that downsample too far or apply too much compression to reduce file size also can turn a good document in an old piece of junk.