Number of alarm for a custom dashboard report

Similar Questions

• SWF file for customized dashboards unifying creation tool

  Hi all

  I'm looking for a tool that can allow me to create SWF files to use for the custom dashboard. I know third-party SWF, swf templates can be created using tools to create files and we can build dashboards customized unifier.

  Can anyone provide me with the list of tools to create SWF files you used for unifying dashboards.

  Thank you

  The only tool that SWF dashboards have been designed to work with are Xcelcius. Please keep in mind that only Skire inherited who had created dashboards SFW clients the possibility to use SWF dashboards.

• During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't

  During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't chat. Please advise!

  MoeGhazal I have reviewed your account and it seems that you have upgraded to a volume license CS4 Design Premium for an upgrade of retail Design Premium 5.5.

  I also shows that you have made two purchases of CS5.5 Design Premium, but the second purchase was cancelled.  Make sure that you use the serial number that ends in 7886.

  If you are using the correct serial number, then it is likely, that the installer won't recognize your serial number of volume license CS4 as being valid for upgrade.  If you can contact our support team you can be traversed through an unlocking procedure to allow you to proceed with the installation.  You can contact our team of support directly in Contact with the customer.  You can try to install a web browser, you have not previously used.  It of probably a toolbar or other software applications affect your ability to access the media cat successfully.

  If you are unable to reach our support team, then please check your account information is accurate.  If you can please then update this discussion after the confirmation of this so I can ask a member of our support team contact you directly.

  I would recommend again reaching out directly if possible it will be the most effective method to resolve your current error.

• Change of automatic tab for custom dashboards

  Hello

  We have several dashboards custom designed and would like to show them as a monitoring on a large screen. But this is only useful if we have the possibility to automatically every 60 seconds on an another dashboard. Have anyone an idea how to get account only?

  Thank you and best regards,

  Christian

  Because you are using a custom dashboard, I would say that you use the Advanced/Enterprise license. You can configure the tab rotation in ' dashboards-> reorder tabs... ". ». From there, you can set what dashboards (Automatic Transition) and the time (inseconds) and the tab following (this tab). Do not forget to loop to the first tab if you want to loop forever.

  In addition, you might want to disable the time-out of the user interface. Check out my blog about this: http://www.jume.nl/entry/vcops-ui-session-timeout (or do a Google: vcops ui timeout).

• How can we get the details of the traffic for the spaces for example, users access report by place (all users)

  How can we get the details of the traffic for the spaces for example, users access report by space (for all users), DB tables can be used to get information, such as for example: users who have logged in - never

  You can use analytics. WebCenter Analytics comes with a number of events out-of-the-box for which it brings together measures which are very useful.

  You can check in the WebCenter Analytics database schema. WebCenter Analytics Dashboards are present in the scheme of ACTIVITIES and are modeled in the form of a star schema.

  The schema includes 2 types of tables. FACTS analytical tables are used to store instances of specific events. For each event, a specific FACT table is present, for example for page views, the views of space, connections and so on. These tables contain a timestamp for the moment, that the event is occurred and integer ID these descriptive reference data stored in DIMENSION tables.

  DIMENSION tables contain descriptive information about the entities associated with events. Size examples are pages, applications, groupspaces, users and so on.

  See the details of the table all the under http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_app_aschema.htm#JPSDG10767

  If you want to custom event.that track, as you can get. see this blog entry

  Quobell technology - portal WebCenter: WebCenter Analytics: define and save custom events

• Need help to see an alarm for an AP story/event

  I need help to see an alarm last occurred about two months ago, here's the information:

  I had a point to access Cisco 1524 down has a location around the week of April 15.  This access point is in a very remote place and is very rarely used so I did not have to examine the problem until about a month later.  It turns out that the Cat5 cable was damaged in an act of vandalism and the AP returned to the top after I solved the problem of cable.

  An investigation is underway and I wish I could say the detective the exact moment wherever the AP first reported down to the WCS.  I know that the alarm was there as I just never took the time to record the date and time.

  When I go to the alarms it go far enough to see when this happened.  Is - this information stored anywhere so I can pull a report and see the date and time of the AP are down?  I have searched and searched the boat launch of the report, but for the life of me, I can't find this information.

  I have the version 6.0.132.0 of the WCS.

  Thanks for any help that can be provided.

  Bucky

  Bucky,

  WCS logs have a finite number of alarms, they can store. If the event is more listed, then he was in and there is no way to recover this message alarm to see exactly when it was generated.

  Sorry...

  Lee

• I am told to close the customer dashboard to complete the installation, but I can't find that anywhere on my Mac.

  How can I close customer dashboard? I experience this problem more whenever there is an update.

  Hello

  I found a similar problem reported on Apple forum https://discussions.apple.com/thread/1850533?start=0&tstart=0

  Copy of the resolved here, reply "dashboard is essentially a stripped-down web browser. Installers usually get Flash Adobe for open web browsers before installing and recommend it be closed before you install it. Then, try to go to the dashboard and then move your mouse over any widget open and then hold down option (or alt) and a small must appear in the upper left corner of the widget. Click to close the widget. Repeat this for all open widgets, and then re-run the installer of Flash. »

  Hope solved you the problem.

  Varun-

• Custom CSV report

  Hello

  I need to create custom CSV reports (in fact the txt file). The report must have the header and the body. All information is stored as columns. For each new column step are added to the body. In addition, header must store first step failed agency name.

  Example:

  DUT SN, name of the Machine, first failure, step 1, step 2, step 3

  XXX, yyy, step 2, pass, fail, pass

  Currently, I'm lost in the process and articles template file of NOR. I don't know what path should I take: changing the entry report reminder or ReportGen_txt.seq or maybe something else?

  I would be grateful for information on how to approach the subject. I never no custom report.

  Thanks in advance

  Hi Michal,

  the report text Simple plugin would be a good starting point. You can find here installation instructions:

  http://zone.NI.com/reference/en-XX/help/370052N-01/tsexamples/infotopics/modelplugin/

  Concerning

• Custom dashboard

  Hi all

  At the present time, I have 1 custom script (i.e. check_telnet) and this script I need to deploy N no time to monitor N not for host + Port each time when I deploy this script on any host it will create a new topology in the data model. Now, with custom dashboard I want to collect all of these host + Port and status in the single table/view, but I fight to achieve it, I thought that I can do it in Configuration->->-> Add application definitions, but I'm not able to combine. Can someone let me know how I can also all this information in a table as below

  Host Telnet_Status port

  1.1.1.1 1 1

  1.1.1.2 2 0

  Thank you

  Shashank Soni.

  Hi Shashank-

  If it's the same instances return the same type of topology agent script, you should be able

  to create a WCF dashboard with a line oriented table to display the data. Here are a few

  Useful links:

  http://eDOCS.quest.com/Foglight/555/files/WCF-ref/docs/component/WCF/table/row-table/

  http://en.community.Dell.com/TechCenter/performance-monitoring/Foglight-administrators/f/4788/t/19552653#5155

  I hope this helps.

  Robert Statsinger

• Production Premium CS6 claims "this serial number is not for a product calling." Please try another. »

  Hello

  I reinstalled Windows not so long ago and wanted to reinstall Production Premium. I have my series here on the box, and when I get it it tells me "this serial number is not for a product calling it.» Please try another. ». The series is for Production Premium CS6, and I installed Production Premium CS6. I'm a bit confused to why it tells me that my series is of no use. If I log in on the website I also see my series listed there also, as "'Adobe Creative Suite Production Premium" version 6.0 "

  Thanks in advance for any help.

  
  David

  Contact personal Adobe via chat (may have to wait a week day):

  You connect the Adobe ID you used for your purchase, click on this link:

  Contact the customer service

  Click on the blue link.

• preference for the present dashboard

  Hello

  By default the time range is 4 hours for metric dashboard data.  I have a dashboard that I want to show in the last 30 days.  He is not one of the slot provided, and I don't want all the users to manually change the time range for the dashboard.  Is there a way to set the default interval for a specific dashboard or view only?  So I want to dash A, all users to see the data for the last 7 days, and for the dashboard B, I want all users to see the latest data of 8 hours.  Is this possible?

  Also, is there a way to create the slot for 30 days, because it is not one of the range of time integrated on the dash?

  Thank you!

  Hi Frank,.

  Views WCF have "Options Page" that allow you to implement this requirement.

  More precisely, the value

  Configuration

  • Page options
    • Time range options
      • Allow Custom fake
      • Selections
        • last 30 days

  Here is a screenshot of what looks like this configuration in the WCF definition editor:

  

  A dashboard like this can be configured to contain a drag and drop portal planned receptacle portal has been configured to 'Allow this dashboard be included in other custom dashboards'...

  Kind regards

  Brian Wheeldon

• Unable to share the custom dashboard

  Hello

  I have the Version 5.8.2, build 1885282 od VCOPS company.

  It's the update from version 5.8.1.

  I created several dashboards customized in the version 5.8.1 I was able to share them between groups.

  But now in version 5.8.2 I don't see / have the share for dashboards customized button. All I see is:

  Dashboard tools: MODIFY REMOVE CLONE INTERACTIONS CREATE TEMPLATE EXPORT and IMPORT

  I'm in the band directors with all active access right.

  No idea what happened?

  Thank you

  Problem solved.

  The problem is connected to the web browser. Firefox and Chrome do not allow to share custom dashboards. Either a sharing option as there is no problem at all. Share - is the only one missing out of the entire line, and it became very confused to me. Login as administrator, Member of the Admin group, does not. The time I had to go to IE (which is very rarely as you can see) I was able to share the dashboard.

  Thank you very much for the help.

• Can we ignore alarm for the use of the disc on the disc?

  Hello

  There is a data store of close to 2 TB, assigned to a cluster of servers ESXi 5.

  We performed P2V to a number of physical hosts and now only get about 80 GB of free space left.  And we get an alarm for the use of the disc on the disc.

  We wonder if it will be a problem to keep only 80 GB of free space on the disk (we will not add another VM in this datatsore more in the future).

  Your opinion is requested.

  Thank you

  Yes. Veeam - as well as other applications of image - based backup creates a temporary while backup it VMs. depending on the activity of the drive of the guest during this time the snapshot could develop and fill the instant capture data store. More you customers backup simultaneously more risk. Unfortunately there is no rule on the amount of space free disk is needed, but the 80 GB seem to be really low. With a 2 TB data store, I suggest that book you at least 10% (preferably more) for snapshots.

  In addition to this, you need to monitor the disk space on a case where something goes wrong with a backup and snapshot cannot be cleaned automatically!

  André

• CS6 upgrade returns: "this serial number is not for a product calling it".

  I have CS5 and have used it for about 2 years. The serial number for CS5 it is registered to my adobe id.

  So I decided to move to CS6 today. I registered so that my ID adobe as well.

  When I open CS6 and enter my new serial number, it tells me:

  Serial number you provided is valid, but calling it a product was not found on this computer

  Which is strange because CS5 is currently installed and running on this computer

  So he then invites me to choose a previous product I own and enter the serial number for this. So I select CS5 and enter the serial number for my CS5 license.

  However, he then said: "this serial number is not for a product calling." Please try another. "

  But he said not may all in detail below. Why is know not valid?

  Can you help me?

  Thank you!

  I understand John.  It was a rare event as usually the previous version serial number should be accepted.  That's why I recommend you to contact directly our support team in case of series available in respect of the account numbers cannot be used successfully.

  By contacting our support team directly at the Customer Contact then the exact serial number CS5 can be watched and specific corrective measures can be taken.  For example, if the serial number of the Creative Suite 5 is for a volume license then is refused by a retail installer even if there may be a way to upgrade valid.

• How to export Excel dashboard reports in OBIEE 11.1.1.6.0?

  Hi Experts,
  
  How to export Excel dashboard reports in OBIEE 11.1.1.6.0?
  For example:
  Dashboard contains more than one report and add an export button for downloading these reports to Excel.
  
  Is it possible to implement this requirement? Thank you.

  There is no direct option, you can try the following workaround.

  Option-> Print-> page printable Html

  Then the file-> Save Page as

  Pharmasset Save as type as it is-> all files
  File name as Report.xls

  When you open the xls file, if you get a pop up saying problem during a load simply omit it and move forward.
  The report opens in excel.

  Or save the page as html /mht and open it with Excel, it works too.

  Note: I tested this in Mozilla

  Thank you
  Vino