(number of bits) in a number

Similar Questions

• EliteBook 8730w: number of key Windows Vista 32 and 64 bit

  Hello

  XP has been installed from a disk partition (D)

  My laptop has been improved from XP to Vista 32 bit with the CD that I got the pakage.

  In the buttom is a buffer with the key number.

  I have the CD with Vista 32 and Vista 64

  1 is the number of the same key the 32 and 64-bit

  2. I would like to format the C drive.

  3. can I install Vista 64, from the CD?

  Thank you for your help

  No worries. Yes, you can perform an installation of Vista with the DVDs you have. You can reformat the hard drive as part of the installation.

  Before you start, go into the Device Manager to see what wireless adapter, graphics card and network card is installed and write it down. This will allow you to save time.

  You will need the following DVD that you said that the laptop came with...

  Operating system DVD of Windows Vista Business SP1 (64 - en)

  Application and Driver Recovery DVD 32-bit and 64-bit for Windows Vista

  Note the twenty five characters activation of license key before starting. Enter it on the request for the installation of Windows script. Once the installation is complete, use the disk to install the drivers. If HP Support Assistant is available on the disk driver and application, install also.

• Signed NewSubProperty number 64-bit

  I have a very simple question.

  I want to create a local variable programmatically by using the NewSubProperty method:

  Locals.NewSubProperty ("size", PropValType_Number, false, 5)

  If I, a number is created. The type I need must be whole signed 64-bit. How to do?

  Hi Madottati,

  You can assign the type of local variable by using the following expression:

  Locals.FileSize.Type.Representation = PropertyRepresentation_Int64

  I hope this helps.

• How to get the number of bits of Windows?

  Hi all

  How can I get the number of bits of Windows, the application of the LV is running on?

  By using the disabled conditional structure, I can get the number of bits of the application (if it is built in BT 32 or 64), but not the number of bits of windows.

  Thank you

  system variable 'PROCESSOR_ARCHITECTURE '?

• Convert the string of 32 bits to a hexadecimal number of LV 7

  Hello!!

  I have a 32 bit string I need to convert a hexadecimal number, what program I can do?

  Can someone help me?

  Thank you

  Each character in a string is a BYTE.  So you tell each of these I8s are 0 or 1?  If this is the case, then why not just use Boolean values (TRUE or FALSE)?  An array of Boolean would do this very simple since you can simply use the primitive Boolean array of numbers to do the conversion for you.

• SMU-8431/8 RS-422 serial card sends the wrong number of bits

  I use a card series SMU-8431/8 RS-422 configuration for talking to a camera that has the speed of transmission parameters following 38400, 7 data bits, 1 stop bit, odd parity. I confirmed that the device certainly has these settings I can communicate with him using a separate Linux PC.

  When I try to use the serial port of EITHER the device does not react. Then, I connected the serial port OR on my Linux PC to see which sent the port NO. It is garbage. Nonprinting characters, control commands and the other characters are converted (for example I send the ascii character '1' and get the ascii character 'a').

  I made sure to add the terminating resistor 120 ohm NI RX + RX-lines and as mentioned in other posts on these forums, but it is only for the reception and did not solve the problem.

  I put a scope on the TX + and TX-lines from the map OR track seems reasonable that sent bits is correctly 38400 and voltage levels are correct moving between +/-3V. What I've noticed, is that the map series, NEITHER seems to be send to the 11 data bits. I expect 10-bit (1 start bit, 7 data, 1 parity, and 1 stop). I changed to 8 and then 6 bits of data and the total number sent passes to 12, then 10, respectively.

  I get the same behavior if I use Labview screws, Panel VISA for the port of MAX, or to remove the software NOR entirely and use Hyperterminal. This would seem to indicate that the problem is something in the settings of low level on the card itself.

  I tried a second SMU-8431/8 card and the same results, this isn't a fault map (may be two defective cards, I guess!).

  Any ideas?

  Many thanks in advance,

  Ian

  Discovered it was: used a scope to view the track both the Linux PC and the serial port OR to compare. The trace OR was significantly longer than the Linux. When I measured the width of the track OR whole, it worked to have a frequency of about 33 000, or much less that the 38400 assigned him. I was getting the wrong characters every bit of data from the port because NEITHER was out of sync with the Linux PC.

  I increased the port baud rate NOR and found that setting in 45 000 made it align correctly the Linux PC and I now the communication between the two devices.

  For the record, I don't have the terminating resistor 120 ohm or the anchor line to be included in the cable series between ports OR and Linux.

• 24 bit MSB - LSB in addition to two the number of spell

  Hi all

  I read bits out of an ADC by sbRIO serial 9602 via DIO on P4 connector.

  ADC sends 24 bit MSB first as a supplement to two: How can I convert it to hexadecimal number they represent the FPGA VI?

  is there already a VI that I have not yet found?

  Thanks in advance.

  Hi Mariano76,

  The VI I think you are looking for is "Boolean Array number.  This primitive interprets an array of Boolean integer.  If you must reverse the sign-MSB/front bit for it to go in this function, you can use the function "Reverse 1 table D.  If you want to interpret these hex data in fixed point representation, the cast function is appropriate.  Once the FXP format, you can scale your ADC full scale data (i.e. +/-10V).  You can drag this code in your LabVIEW FPGA block diagram to test.

  

  See you soon,.

  SPEX

• write/read the serial number of 32-bit

  Hello

  I want to read and display the number of 32-bit Seraglio and then want to store in a text file. every time I scan the new serial number, whenever it needs to store the new number.

  What exactly is the problem you are having? The task is very simple and has been discussed before. If you use a bar code scanner, just search the forum which. If you post the code you've written, a person could look and see what the problem is (if in fact you describe the problem).

  And in case you've not seen it before, there are tutorials available.

• How to choose bits to a hexadecimal number?

  I have a list of hexadecimal number (a single column with "n" lines). Leave the list to be named 'A '. Each hexadecimal number, after conversion to binary, I need to 9 bits, choose the right end (d0, d1, d2... D8) and label as X. Then the 9 consecutive following bits (d9, d10,... d17) and label Y. I want to do it for all the "n" elements has and put it to separate the columns X and Y. Can someone help me to do this? Thank you very much.

  Example:

  Suppose a = 11110000111100000111110000 is a binary form of the first item has. So, I want to choose the pieces that, X = 111110000 (bits from the right end of a) and Y = 111100000 (successive 9 bits). I don't like the rest of the bits to the left. A, I ' n number of elements (a1, a2, a3,... a). I want to do for all and make a list of X and Y (two columns).

  Handling a bit will get it there.  The logical shift and AND functions are essential when dealing with this kind of problem.

  

• How to convert a variable point in fixpoint number 18 bits/4Int and represent in the true HEXAGONAL shape (NOT of FFAE * 2 ^-14 for example)

  As an example of what I would do: floating point number can be encoded as true hexagonal like this (fxp) 18/4:

  -1, 6554565429687500e + 00-> 1001 / 1010 / 0111 / 1100 / 1100 as 9A7CC (9 is the part of the signed integer - 1 MSB beacause negativ). Is there a good way to do this translation?

  Simply mount the FXP for a U32, right shift of 14 bits, and display...

  

• How to convert a large number to the spell without truncate to 32-bit.

  I'm trying to convert a hexadecimal number (string). The number is truncated to 32 bits, which is not what I want. For example, the number 28037546508295 (double) must be 0 x 198000000007. LabVIEW truncates and the resulting string is 0x7FFFFFFF, using number of Hex String.vi. I'm stuck. Thank you.

  'Number of hexadecimal string' accepts only data of I32. So, you should see a red dot of coercion when you connect your floating point number.

  You must use "Format of value" (also in the String > number of rope/coercion-pallet) and use '%x' as a format string.

  hope this helps,

  Norbert

• Convert a single number to a hexadecimal string of 32-bit and exchange the high and low bytes

  I need to convert a number single precision floating decimal to hexadecimal format of 32 bits, share the high and low bytes and that convert a hexadecimal string.  I tried to use the 'Word of Swap' function but it seems to have no effect on the unique number.

  Then

  A single decimal number of entry: 100

  Convert 32 bit hexadecimal string with the low byte first: 0000 42 8

  Anyone have any ideas?

  Thank you

  Slightly lighter, try to cast U32 and exchange words. Same difference.

  (apparently, exchanging words is a NOOP for SGL, but still accepts SGL without constraint. Interesting...)

  

• How to convert a number to a 10-bit array that will go in an external DAC (AD7533)

  Hello

  This here is my situation.  I'm using with LABVIEW to program a CPU in the following way:

  1 Laview calculates the values of a sine wave, according to the number of loop iteration. (i.e. generating a value of the sine at different frequencies).

  2. it is adjusted between-/ + 1.

  3. I connect an array of digital output ports to an external, independent, four quadrants, 10 - bit DAC. The part is AD7533, and I hope I can use it in bipolar configuration.

  My question is, how do I convert the number of sine wave (or triangal, sqr, etc.) in a table of values of T/F can I stream through my DAC and output a sine wave signal?

  I tried number Boolean array with the calculated value of sinus, but do not give me any bits of hard.

  All suggestions greatly apprec.

  RTom

  Post what you have done so far.  Are starting you with a a U16 or I16 whole bit (or more)?  How do you do the scaling between +/-1 and an integer.  It should be just a matter of using the table number of Boolean and then using a subset of the table to reduce up to 10 items boolean.  If you are starting with an integer I16, it may be a matter of taking the element of corresponding table of the sign bit and the 9 elements that correspond to the less significant bits, to put together to make an array of 10 elements.

• How to determine the number XP or XP 64-bit operating systems.

  Hello
  I need to download a driver but need to know if I have Windows XP, XP 64. I run Internet 7 SP3 if that makes a difference. Properties-General-he reads the slot system Microsoft Windows XP Home Edition Version 2002 Service Pack 3. I think this answers the question that it is not XP 64 but want to make sure and would appreciate any help.

  XP Home does not come as an x 64 version.

  How to determine whether a computer is running a 32-bit version or the 64 bit version of the Windows operating system. http://support.Microsoft.com/kb/827218

  Windows XP if you have Windows XP, there are two ways to determine if you are running 32-bit or a 64-bit version. If one does not work, try the other.

  1. Click Startand then click run.
  2. Type sysdm.cpl, and then click OK.
  3. Click the general tab. The operating system is displayed as follows:
     • For a 64-bit version operating system: Windows XP Professional x 64 edition Version < year=""> appears under System.
     • For a 32-bit version operating system: Windows XP Professional Version appears under System.

     Note is a placeholder for a year.

  1. Click Startand then click run.
  2. Type winmsd.exe, and then click OK.
  3. When System summary is selected in the navigation pane, search for processor under item in the details pane. Note the value.
     • If the value that corresponds to processor starts with x 86, the computer is running a 32-bit version of Windows.
     • If the value that corresponds to processor starts with ia64 or AMD64, the computer is running a 64-bit version of Windows.

  If you cannot determine the number of bits of the operating system with these methods, go to the "Next steps" section (of the KB article)

• How can I search for hexadecimal number of 32-bit in .csv file

  Hello

  How can I search for 32-bit in .csv file usinf labview 8.6.1 hexadecimal number

  Mathan,

  This post was not really a solution.  He just ordered Sandy to post in the appropriate forum, which we now know is LabVIEW 8.6.1 LV.

  Sandy,

  You want to read the text file, then use the search/Split String function to find the matching characters that make up your hexagonal pattern.

  What you ask is a little strange wordly since .csv files are text files, and you ask a "32-bit hexadecimal number.  Can you give an example of what you are looking for?  My response assumes you have a 8 string that consists of the characters 0-9, A - F for catch the 4 bytes.  Maybe you are dealing with just 4 bytes that present themselves as ASCII characters in a text file.  In which case you wouldn't have one. CSV file.

  If the response of research/Split String is not useful to you, you will need to provide details about what you are looking for and also an example of your. CSV file.