Number of files opened by Agent is...

Similar Questions

• RN104: 6.4.1: could not open the folder with a large number of files

  Hello world.

  I have a situaton that I can not open a previous file created with a large number of files stored in it.

  There at least 2000 photographs, and when I try to browse, the content is never displayed.

  Curiously, traversing a small file with say, 1000 records, it opens right.

  I have reset the permissions without effect and I can't open it with RAIDar is.

  Any suggestons? I'm about to happen for the pallets of the defibrillatior!

  Thank you!

  Hello Stephen

  I was finally able to recover my files 3000 + using 'snapshot' and download the files on my computer!

  I found a date where they were all visible.

  I bought a new RN204 and move them to the new unit, as well as all my other data.

  It is much faster with more memory as well.

  Thank you

• CC of Dreamweaver on iMac very slow to open sites with a large number of files

  In recent weeks, a site I've worked regularly for several years began to take 10-15 minutes to open. A pop up says it checks the files, but the button that should allow you to escape this process does not work. The site has about 120 000 files located in different folders, and this was never a problem in the past. To access the site, the only way is to wait until the course ends and the spinning ball to go. I read the thread on the port of Skype settings, but I think that this may be a different problem because even though I have installed Skype I rarely running and only one of my sites is affected.

  Any ideas?

  With a large number of files, it would be a good idea to disable the cache of Dreamweaver for this site.

  1. Site > Manage Sites.
  2. Select the site, then click on the pencil icon to change site settings.
  3. Select Advanced settings > local news in the list on the left of the Site Setup dialog box.
  4. Uncheck the Enable Cache.
  5. Save > fact.

  Another possibility is that your Dreamweaver cache is corrupted (probably with as many files). See remove a corrupt cache file.

• Illustrator - "unable to set a maximum number of files to open.

  HI - downloaded & installed the trial version of Adobe Illustrator CS6 on my Mac 10.6.8 but can't open it - get the error message "failed to set the maximum number of files to open?

  Error at launch. Unable to set the maximum number of files... | CS6 | Mac OS

  Mylenium

• "Failed to set the maximum number of files to open."

  This is the message I get when I open adobe illustrator and then it closes just, what do I do?

  I'm on a Macbook pro

  Error at launch. Unable to set the maximum number of files... | CS6 | Mac OS

  Mylenium

• CS6 "Unable to set a maximum number of files to open." YET.

  CS6 "Unable to set a maximum number of files to open." Just got the whole production and everything installed on my Mac, everything works fine to illustrator who only works very well on one not at all on the other. I tried everything I found on the forums here to my knowledge and without success. I just spent 2 hours on call on hold with adobe support and no one picked up. Extremely frustrated, any help would be greatly appreciated.

  Hey eldriario-

  I just fell on it myself. I ran this doc to help adobe (link below) shell script once, quit Illustrator, repaired permissions, rebooted and was then able to start normally.

  Mind you, I would not the least bit surprised if the error returns again tomorrow, but for now it seems to work.

  Good luck and hope this helps.

  http://helpx.Adobe.com/Illustrator/KB/unable-set-maximum-number-files1.html

• Leader: Open Recent works do not. It appears as recent File: Open: clear all.

  Leader: Open Recent works do not. It appears as recent File: Open: clear all.

  Hi guy,

  Maybe a recent system update has reset your system preferences > General > recent items to zero.

  

  Type a number (for example, 10);

  Quit the system preferences;

  Leave the Pages then revive Pages;

  Open some documents to repopulate open the recent item.

  Any improvement?

  If no improvement, shut down your computer and restart.

  "Recent articles" are at the level of the system and refers to other applications, not just the Pages.

  Kind regards

  Ian.

• CVI - Course excel files open "windows in.

  Hello

  I'm working on a project en CVI (8,0), who must deal with Excel files.

  The problem is that my software don't control the file which is open: its name and its location are not known normal program.

  My idea is to browse excel files open, to verify the presence of the characteristic for some characters in.

  Normal however, I can't seem to find the fonctionns allowing me to browse these files in the Excel API.

  My idea would be for example:

  Lancer Excel (se connecter, avec le Excel_ActiveApp )
  POUR chaque fichier ouvert FAIRE
       Lire contenu case 'A1'
       Si contenu == "toto" ALORS
          // C'est mon fichier
      SINON
          // C'est pas mon fichier
      FIN SI
  FIN POUR
  

  I tried searching with

  Microsoft Excel 14.0 object library

  and

  Microsoft Excel 9.0 Object Library

  I have not found.

  So I'm looking for help,

  Thanks in advance,

  Cédric.

  I find the solution here:

  http://www.theusenetarchive.com/Usenet-message-CVI-and-Excel-Help-11429335.htm

  This modified callback in excel2000dem sample project lists all opened files in Excel:
  
  //----------------------------------------------------------------------------
  // ConnectApp
  //----------------------------------------------------------------------------
  int CVICALLBACK ConnectApp (int panel, int control, int event,
  void *callbackData, int eventData1, int eventData2)
  {
  long ExcelWorkbooksCount;
  HRESULT error = 0;
  int i;
  char *ExcelWorkbookName;
  
  switch (event)
  {
  case EVENT_COMMIT:
  // Launch App
  // Connect to existing application if available
  SetWaitCursor (1);
  error = Excel_ActiveApp (NULL, 1, LOCALE_NEUTRAL, 0, &ExcelAppHandle);
  SetWaitCursor (0);
  if (error<0)
  goto Error;
  
  // Make App Visible
  error = Excel_SetProperty (ExcelAppHandle, NULL, Excel_AppVisible, CAVT_BOOL, appVisible?VTRUE:VFALSE);
  if (error<0)
  goto Error;
  
  // Get number of open files
  error = Excel_GetProperty (ExcelAppHandle, NULL, Excel_AppWorkbooks, CAVT_OBJHANDLE, &ExcelWorkbooksHandle);
  if (error < 0) goto Error;
  error = Excel_GetProperty (ExcelWorkbooksHandle, NULL, Excel_WorkbooksCount, CAVT_LONG, &ExcelWorkbooksCount);
  if (error < 0) goto Error;
  
  // Iterate through files and get file name
  for (i = 1; i <= ExcelWorkbooksCount; i++) {
  error = Excel_WorkbooksItem (ExcelWorkbooksHandle, NULL, CA_VariantInt(i), &ExcelWorkbookHandle);
  if (error<0)
  goto Error;
  error = Excel_GetProperty (ExcelWorkbookHandle, NULL, Excel_WorkbookName, CAVT_CSTRING, &ExcelWorkbookName);
  // Print file name
  DebugPrintf ("Workbook %d: %s\n", i, ExcelWorkbookName);
  // Free resources
  ClearObjHandle (&ExcelWorkbookHandle);
  CA_FreeMemory (ExcelWorkbookName);
  if (error<0)
  goto Error;
  }
  
  UpdateUIRDimming(panelHandle);
  MakeApplicationActive ();
  excelLaunched = 0;
  break;
  }
  return 0;
  Error:
  if (error < 0)
  ReportAppAutomationError (error);
  
  return 0;
  }
  

• Maximum number of files that a folder can contain

  Title says it all. What is the practical limit to the number of files that can contain a single folder? These would all be tiny files, usually less than 20K, I'm looking for emotional limit of Windows, rather than the clear disk space limit.

  This is on WinXP SP3 and these files would be created in Word.

  Thanks for any idea.

  I think that with Win7, 20,000 of handling should not be a problem.  Depending on how you access them (such as manually via file |) Open who needs time to load all files to choose among them) it will be slow, but even XP that will handle a lot, even though it may be slower.

  Steve

• How can I MIX photos files opened in the Gallery of photos uploaded Photo, has attempted to open in word document too HELP!

  opening files of MIX in the GALLERY

  opening files of MIX in the GALLERY

  ===================================
  The picture it!. requires format Mix (extension)
  Ms Picture It! or MS Digital Image.

  If you need an application to open files with... you
  could use the trial version of 60 days of digital
  2006 image.

  Even if you have the .mix files... it might be
  a good idea to save them in a more universal
  .jpg, .png, or .tif format. You can make a
  lot in Digital Image if you are going to...
  ...... Editing / Edit in Mini Lab to batch / save under...

  The number of files that you can convert simultaneously
  depends on your system resources but I
  would try 50 and see what happens.

  Microsoft Digital Image
  Starter Edition 2006
  http://tinyurl.com/28loxr
  or...
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7C3B3DED-A15F-48C5-B724-7796FE8C151E&displaylang=en
  (this product line has been
  abandoned, but you can still
  Download the Starter Version
  and run it to 60 days) John Inzer - MS - MVP - Digital Media Experience

• Too many files open Crash

  Watching was done with support, one of our FMS crashed last night because of too many open files. Just curious, if this has happened to anyone else? This file is Foglight actually open?

  Someone at - it an agent which montors open files on a host computer? Seem that we need something like that.

  Error open files can be a bit for any java program missleading. This means in fact - handles of files that includes libraries of dynamic dynamic links, each jar file, files opened, each open network socket...

  (at least on unix systems)

  Stefan

• Modern slow mail app or crashes if you have a large number of files

  I have a large amount of mail and upgraded to the new mail app, when I open the mail or switch folders that the app gets real slow. How can I fix?

  After the update to your e-mail to 318 version application, you may have noticed that when you open mail or change records/account app slows down or crashes. This happens if you have a large number of files, usually around 200 to 300.

  Note: to find out what version you have:

  1. open the Mail application.

  2. drag the right edge of the screen, or move your mouse to the upper right.

  3. Select settings and click on to words. (The version number appears.)

  Workaround

  The only way to avoid this problem is to reduce the number of files.

  Once you reduce the number of records to a more acceptable level, the Mail app will work normally.

  More information

  Windows Mail: Setting up an account of end-to-end

  Solve problems with Windows Mail

• I was trying to import a large number of files on 10 Organizer.  10 Organizer now hangs at the launch.  The Welcome screen appears for a second and then crashes.  How can I fix it?

  I was trying to import a large number of files on 10 Organizer.  Now, the organiser hangs at the launch.  The Welcome screen appears for a second and then crashes.  How can I fix it?  I use desktop iMac with Yosemite.

  mercad611 wrote:

  I was trying to import a large number of files on 10 Organizer.  Now, the organiser hangs at the launch.  The Welcome screen appears for a second and then crashes.  How can I fix it?  I use desktop iMac with Yosemite.

  If the problem is related to a corrupted catalog, try to open the organizer with a new empty catalog.

  Hold down the SHIFT key at the launch of the Organizer. You get a dialog box with the choice to start with a new catalog, or start with a different catalog and even to 'fix' the current catalog. If your organizer starts with an empty catalog, use the option 'fix' on your corrupt catalog.

• No file open in PS CS2 or CS5 demo

  Until about a month ago my PS CS2 worked very well.  Then one day I found that I could not open all of the files in the program. I tried to reload the preferences without change.  I then removed and reloaded the program (Creative Suite CS2) and PS worked great for two days, then returned to the same problem.

  I recently downloaded a current version of CS5 (with all updates) and it has the same problem.  I noticed in file > open recent it shows a record of all of the files I tried to open.  I tried to use various methods to open the files, as through bridge and explore.  I rebooted preferences without change.

  I searched conflicks with my program of virus (Vipre) and PS is an approved program, no change.  In my view, there must be a few conflicts in my system, but I can't find what it is.  I want to emphasize that I have run a number of video and 3d programs.  And all my other Adobe products work great.

  I might mention that I recently tried Fireworks CS5, and it worked very well with pictures, no problem.  The only program that appear to be affected is PS

  I'm under a Latitude of Dell (D520) with Windows XP Professional, Service Pack 3, Intel (R) Core (TM) 2 CPU T5500 @1. 66 GHz, 1.99 GB of RAM, physical address Extension.

  I searched the web for answers, nothing has worked.

  I'd appreciate any help.

  Gerald W-

  Jerry,

  This integrated graphics Intel 2010 driver is the last available? It is now more than 12 months old and the Windows updates and patches can make an outdated video driver.

  PS interfaces closely with the video driver and who is either obsolete, or may be corrupt, ofen will keep a lot of things to happen correctly.

  Good luck

  Hunt

• Change the orientation of the page on a number of files

  Hello

  My question is 'how to change the page orientation in a number of files simple but always keep content?'

  I use FM7.0 and I have a book containing a number of files. I want to use the master and the Pages of some of these files, including the structure, the EDD and the formats, but I want the pages in landscape instead of portrait. I made a first attempt, just using the Format/Page/Page layout size, but it seems I have to go and adjust each file separately, in response to the error messages displayed. Is there an easier way?

  Advice appreciated.

  See you soon

  Carl

  Carl,

  Once you have a single file adjusted the layout of landscape you want, you can use it as match your model to adjust all the files in your book.

  A quick & dirty way to make a reusable template for orientation is to save the file that you want to use as a template under a new file name of file, for example save as > myLandscape_tmplt.fm.

  Then with the open template file, you can blow the content so that it is not a distraction: simply press ctrl + A to select everything in the main stream press DELETE. Now you can re-record it and you have a simple model landscape. Open this template file.

  Open the book that contains the files you want to change (Tip: if it's just a collection of files that are not specific to a particular book, create a temp book to contain all these files). Now open all the files in the book by holding down the SHIFT key and then click the file menu and select "open all files in the book. This will open all the files in the book at once.

  Now using the book file, select all the files that you want to change the landscape.

  Then using file > import > Formats... Select the Document in: be the landscape model file.

  Now, you have to uncheck all the options, except for the 'layouts '. You may (or may not) want to also enable deleting format/layout overrides (depending on what you did in the documents).

  Now click on the import button to apply the pages using the landscape to all documents.

  You can now review the individual documents, because they are open, to see if the page layout is to your liking. Note: If you don't like what you see, simply close all documents and you'll be back where you started from (you can do the shift + file > close all files...) Tip to close all files in the book). You had made this step to import directly in the book selections without having to open the files first, you wouldn't be able to regularize in case something goes wrong, as FM opens, imports and then saves and closes the files when they are made from the single book file.

  I hope that this will make things easier and faster.