Number of pieces is not updated?

Similar Questions

• Badges of e-mail not updated with new e-mail messages in folders

  I use iOS 9.3 and I set up my email exchange for folders to push as well as my Inbox, but only the Inbox mail updates the badge number. If I get the mail in a folder, I get just banners subventio but the number of badges is not updated. Is there a way to change this, because I need to know all the e-mails unread in all folders

  To my knowledge only the Inbox badges poster. Someone may be able to comment further, but to my knowledge if you have mail rules that filter messages to other folders before they are pushed to the phone, you can only get notification. Some users report not even get notifications. I have not experienced with my Exchange account, so it's just sharing information that I heard.

• Windows Update fails with error [error number: 0x800A0007]-which is not listed

  Windows update fails with error [error number: 0x800A0007]-which is not listed, so unable to update the system

  The other post:

  Thank you for your reply - but the problem persists - this is mopre complete info.
  The system starts well and runs - BUT I cannot now be updated because when I access "Windows Update" it always returns this error message.
  Also, none of the messages in your "appliesto" step 2 recommended link will be applied effectively.
  As far as I know - we have a standard system and I just ran again ONCE a full system virus etc check - all clean.
  Also your "Mr Fixit" was performed several times, but nothing changes.
  Because it enters the update process, and then always closes with this specific message (which as I said is NOT in your list of error messages), which SHOULD tell your software writers where is the problem.
  This is what is happening in the process of updating before it fails:
  Keep your computer up-to-date
  Check to see if you need updates for Windows, your programs, your hardware or your devices.

  Get updates of high priority (recommended)
  Select among the priority and optional updates for Windows and other programs

  ... and it does not matter if I say "express" or "custom" - headed then:

  Checking for updates for your computer...

  but fails after a few seconds with the same message as follows:

  [Error number: 0x800A0007]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  -However, it is the State of the system for more complete information for you:
   
  Name of the operating system Microsoft Windows XP Home Edition
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  MISCHU06BLUE system name
  System manufacturer Compaq Presario 061
  ED865AA - ABA SR1610NX NA540 system model
  System Type X 86-based PC
  Processor x 86 family 15 model 47 Stepping 2 AuthenticAMD ~ 1790 Mhz
  Version/Date BIOS Phoenix Technologies, LTD 3.33, 17/08/2005
  SMBIOS Version 2.4
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  MISCHU06BLUE\Compaq_Owner user name
  Time zone Pacific Daylight Time
  Total physical memory 1 024,00 MB
  Available physical memory 468,50 MB
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 1.51 GB
  Paging file C:\pagefile.sys

  Please get us some help to solve this problem.
  What else can I provide?

  I didn't ask if it was a new issue or a new problem, I asked if she was the same computer?

  [This applies to your recent 'me, too' answer to another thread.]

• I am running Xp SP2 Windows does not update anything more and gives me [error number: 0x8024400A] Why can't update Windows again?

  I am running Xp Sp2 and about a month, there are, I tried updating to SP3 (new) and it sends my computer fits in. It keeps just reboot and reboot (SP3 has always done this has my computer since its release). I had to do a cover of the plant to return to the place where he could start normally but now Windows does not update anything. I go to Windows Update, it goes through the motions of checking to see if everything is legitimate, click the express button and gives me "the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. [Error number: 0x8024400A]   After going through the links provided and find no solution the last link sent me here. So why can't update Windows?

  Hi kriplurr,

  Thank you for keeping us posted about the State of the question.
  I'm glad you are able to run the updates.
   
  You can download the Windows Installer under the following link and check.
  Windows Installer 3.1 v2 (3.1.4000.2435) is available
  seehttp://support.Microsoft.com/kb/893803
   
  Or you can download it directly at the following link.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=25
  (a) click on the above link.
  (b) click Download next to WindowsInstaller-KB893803-v2 - x 86-.exe
  (c) install and check.
   
  Hope this information helps.

• Order form does not update grand total calculation until I have indicate a number on the next line.

  I created a purchase order with a "quantity" column, a column of job description, a unit price column and a point $ column total. I've set the total column of $ point to calculate automatically once a quantity and unit price entered, and it works immediately once the unit price and quantity entered. But my grand total at the bottom of the total column $ is set to calculate all the lines of total $ point, but the total general don't not updated to reflect the $ total for a given line (e.g. line B) until I have begin to type a number for the next line (e.g. line C). So, I always end up having to create a line of extra reserved space with a quantity of 0, just to get my total general to update. Is there a way to fix this?

  It is most likely a problem with the calculation of field order. You must ensure that the total is calculated after row grand totals.

  This can be set in form editing mode, under the order of computation of Set field - other tasks.

• Hello. I have 5 Lightroom and it was an upgrade of the 4. I had to uninstall it on an old machine and reinstall on a new machine. I have however update serial No., she asked my original serial number and I do not see that load in my tab orders Can

  Question: Hello. I have 5 Lightroom and it was an upgrade of the 4. I had to uninstall it on an old machine and reinstall on a new machine. I have however update serial No., she asked my original serial number and I do not see that load in my orders tab. Can someone help me figure out how to get this information?

  You can check your account, Adobe ID Code

  and check with the support of adobe.  Contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• numbers of drive and beaches not updated in the Finder?

  Hello

  I recently found a hard drive I hd lost and there a lot of music that I have imported CD years ago.

  I have added to my iTunes library and noticed that there is lack of follow-up and disk numbers.

  I've been correcting these and while everything in iTunes is the correct order, good number of files in the Finder do not show the disc and track numbers.

  It's not a big deal, but I would like to know why this is happening.

  There is nothing wrong with the pieces of music and tried to restart, duplication and re-import after change of track and disk number.

  Concerning

  In iTunes > Preferences > advanced there are two options, keep... and copy... I think at least one of them is turned off the coast, maybe both. The other made sure that everything you add to the library is copied to the folder media, the first updates the file name and the path of what is in the press kit in response to changes in metadata. Unless you have good reason not to do it, then I would recommend allowing these two options and the consolidation of your media in the designated iTunes Media folder. Note that the titles in .wav format are not tags. These will lose information deleted and re-imported. It is also possible to create without tag mp3 files or mp3 files with several tags that iTunes could not update properly.

  TT2

• I've not updated iOS 10 to my model MD544AE/a mini iPad.

  I've not updated iOS 10 to my model MD544AE/a mini iPad.

  why it is not so?

  Mini iPad 2 does not support IOS 10?

  It's an original iPad Mini, not a Mini 2 - the original Mini doesn't support iOS 10, it doesn't have the necessary equipment for him

  (I asked the hosts to remove the serial number of the title and after).

• Stream Podcast shows of new episodes, but feed validators and subscribed itunes do not update

  Hello everyone, I ran a rather strange problem this morning during the release of my latest podcast episode.  When I publish a new episode, it appears in the flow, but it will not appear in itunes.  I know that there is a delay for the itunes store to show the episode but the episode shows when I check with a subscribed podcast app.

  Here is my podcast on itunes:

  https://iTunes.Apple.com/us/podcast/Church-collective-worship/id672308308?MT=2

  The last episode is in the RSS feed and as far as I know, everything looks ok:

  http://thechurchcollective.com/Podcast-RSS

  But when I look at the flow through a feed validator, it won't show the most recent episode of today.

  While trying to figure out what might be the problem, I tried to put the audio from today in last week's episode (108) and when I go there to play, he continued to play audio from last week even though the RSS feed shows that I put another file in the enclosure.  If for any reason, the stream no is not updated even if it is actually updated.

  Thanks in advance for your help, I've learned a lot already just looking through this community.

  The store, by subscribing in iTunes and the stream itself illustrated all episode 108 as the last and at the reading of the episode in iTunes that it promises to be 108.

  Your web page to the http://thechurchcollective.com shows an episode (number 14), dated today. It has a built-in Soundcloud player, which seems not to be the case with episode 108, and such a player will not work in iTunes (if it's probably why Wordpress is not placed in the flow).

• Firefox does not update itself?

  Automatically install them updates is checked, but Firefox is not update auto, the about box says "Firefox is updated. I have Firefox 36.0.4 Funnelcake mozilla35 January 2015-1.0.

  Although Firefox 37.0 was published Tuesday, the number of automatic updates is limited so that Mozilla can look for any major problem among early adopters. If you hurry, you can download the full installer instead of waiting for the upgrade (scroll down for your language):

  https://www.Mozilla.org/Firefox/all/

  Note: Do not uninstall. The full installer will find your existing settings.

• Why does not update my Mac/Itunes

  Dear all,

  New to this forum thing but I have no were else to turn.

  I recently bought a new mini Ipad 4 running the latest OS 9.2, however when I have the cable link to my Mac, it is not recognized due to my Mac running an old Itunes.

  So, as any who would put you at day - however, my Mac tells me that I run later: Mac OS X 10.6.8... It does not update further. Then, my Itunes is 11 V. 4 and when I go to apple.com, it won't download any version later i.e. V12

  So now I have an ipad that I can't fully use

  My Mac features;

  Model ID: iMac10, 1

  Processor name: Intel Core 2 Duo

  Processor speed: 3.06 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 3 MB

  Memory: 4 GB

  Bus speed: 1.07 GHz

  Many thanks to anyone who has faced a similer problem or knows how to solve this problem

  C.

  PS - I've read about the update OS X El Capitan, but it seems that many people have problems with it, so I have not upgraded to this OS

  "it will be not updated everything.

  That does not mean that you cannot upgrade to a new OS X. There is a difference between an update and upgrade. Just because you read that some users have had problems with El Capitan, does mean you want.

  The minimum requirement of OS X for iTunes 12.3.2 is OS X 10.8.5 or later as shown here > Download iTunes 12.3.2

  If your Mac meets the requirements, you can upgrade for free directly to El Capitan v10.11 > OS X El Capitan - technical specifications

  El Capitan is available for free on the App Store.

  Then you can update iTunes to sync with your new iPad.

  If your Mac does not meet the requirements of El Capitan, see if your Mac can pass to v10.8 Mountain Lion > system requirements for OS X Lion mountain

  If so, you can buy at the Apple Store Mountain Lion > http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

  Apple will send you a confirmation email with a redemption code. You can use this code to purchase on the App Store to download Mountain Lion.

  Very important to read this thing before upgrading to snow Leoaprd > the upgrade of 10.7 and don't forget Rosetta! Apple Support communities

  post edited by: CS

• guarantee not updated in my profile

  I have already submitted (3 times) the copy of invoice of my mobile for the proof of purchase, but still not updated in my profile, not even answer from the support team. For participants of MFN feedback I needed this to update my profile.
  
  Thank you
  
  RAM

  Proof of purchase suggestions are being developed. We don't currently has a process for the India but see that we receive a large number for the India to our support team we. She'll get. Having completed this does not affect your eligibility for the MFN as I see that you have produced recorded successfully. Your participation on the Forums has rather a greater effect on your eligibility. You will receive an email when you POP is completed.

  Mark

  Forums Manager

• DLL version does not update after you apply MS14-026

  Hello

  I applied the security of .NET for MS14-026 patch according to the https://technet.microsoft.com/library/security/ms14-026 on my Windows 2008 R2 SP1 servers.  I did have errors or problems during the installation, but what I find more precisely with the .NET 3.5.1 update (http://support.microsoft.com/kb/2931356) is the version of file not updated the version number that is in the article.  I have not checked all the files in the list, but a single specific file used by our security team to determine if the update has been applied is system.runtime.remoting.dll article states that the version number of this DLL must be 2.0.50727.5483 after you apply this update.  On all systems, I applied this update for at least 10 so far, it remains to the 2.0.50727.5420 version.

  It is perhaps a typo in the documentation or could I do something wrong?

  Thanks in advance for your review!

  J

  Hello

  I applied the security of .NET for MS14-026 patch according to the https://technet.microsoft.com/library/security/ms14-026to my Windows 2008 R2 SP1 servers.  I did have errors or problems during the installation, but what I find more precisely with the .NET 3.5.1 update (http://support.microsoft.com/kb/2931356) is the version of file not updated the version number that is in the article.  I have not checked all the files in the list, but a single specific file used by our security team to determine if the update has been applied is system.runtime.remoting.dll article states that the version number of this DLL must be 2.0.50727.5483 after you apply this update.  On all systems, I applied this update for at least 10 so far, it remains to the 2.0.50727.5420 version.

  It is perhaps a typo in the documentation or could I do something wrong?

  Thanks in advance for your review!

  J

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows 7 will not update

  My toshiba windows 7 continues to try to update, get to 68%, then comes back.  I can't do something... off, open in safe mode, so I can use it.  It is only 18 months old has been in stock 8 months.  It doesn't help.  Can I recover?  or go buy another.  My friend told me that he was dying.

  Hi gustav xoxoxo.

  1. did you of recent changes on the computer?

  2. what happens when you try to install updates? You receive an error message?

  3. which Windows update keeps installation and go back?

  4. do you have security software installed on the computer?

  Method 1

  View update history to know which update is not installing.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

  Once you know the KB number thenvisit download of Microsoft Update and put the number in the search box, download and install the update manually.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 2

  See the below Microsoft article and try the steps mentioned, check if it helps.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• KB981715 & kb981726 still do not update.

  KB981715 & kb981726 still do not update.  I am running vista 32 bit sp2.  I don't know what to do.

  Sorry, you have problems getting your patches installed. I have a number of things for you to look at.  First of all, your Background Intelligent Transfer Services set to Automaticand started and Windows Update ? They both should be started. You can check these settings by typing services.msc in the search box of the start menu.

  Sometimes in order to get patches to install correctly, you must perform these tasks manually. Download each of these islets and click download and run.

  KB981715

  kb981726

  If this does not work, try to run the Microsoft OneCare safety scanner.  Sometimes it will solve problems of hidden registry, or can clear the virus that can prevent the installation of the patches: http://onecare.live.com/site/en-us/center/whatsnew.htm. Click full service scan, and then Quick scan (full scan takes a long time to complete). Try the patches.

  Barbara