Number of processor

Similar Questions

• What is the number of processors and maximum memory options in MSCONFIG?

  MSCONFIG (START)... Who can tell me what that? !!
   
  http://www.HTPC-reviews.com/wp-content/uploads/2012/08/speedup_windows7.jpg

  This photo... It's the MSCONFIG window

  64-bit Windows 7

  who can tell me what is 'exactly' the real role of:

  -Number of processors
  -Maximum memory

  because

  I have i7 with 8 processors and when I chose (number of processors) 8 processors, that nothing has changed! It's same as 0.
  and I have 6 GB of ram and when I chose (maximum memory) = 6 GB, nothing has changed, but became 5 GB in the Task Manager!

  What is - c!

  can someone help me please!

   
  Hello
   
  These options to limit the use of processors and memory to the specified value. If you want windows to use all available processors and memory, you must leave two options not controlled.
  When the number of processors option is set to zero, Windows will use all available processors.
  If you recently changed the processors, this may help: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/howto-get-windows-7-to-detect-your-new-multi-core/71519d51-f6cb-47df-b3ff-66c2928d6de4
   
   

  Hope this information is useful.

• Cannot change the number of processors present on the drive

  Hello

  I am a new user but have searched the forums and FAQS and can't find the answer.

  I have VMWare Workstation Player version 12 for Linux.  Host is 23 Fedora on a processor quad-core i5 with 8 GB of RAM.  Guest operating system is Windows 7.  It's for personal use, so I don't have a license key.

  The question I have, is that several parameters is not editable, especially the number of processors. The selection is grayed out and set to 1.  In addition, the hard drive and display settings (graphics card) cannot be changed either.

  I tried both with the virtual machine off and with it works.  Doesn't make a difference, the settings are grayed out.

  I searched everywhere for an explanation, but have not found a clue.  Help, please!

  Thank you

  DW

  The settings are grayed out when:
  -the virtual machine is running
  -the virtual machine is suspended
  -l' virtual computer runs in background

  If poweroff the virtual machine with a full stop of the guest.
  If it still does not - check if you are the owner of the vmx file

• How to change the number of processors / cores

  I have virtual machines that I have to move periodically between 3 computers main host that I use:

  1 Intel Core 2 Quad CPU with Windows 7 Home Premium 64 - bit - 1 processor with 4 cores

  2 Intel Core i7-2630QM CPU with Windows 7 Home Premium 64 bit - 1 processor with 4 cores

  3 Intel Core 2 Duo T7700 CPU VT with Windows XP 64 bits - 1 processor with 2 hearts

  Hosts running VMWare workstation 7.

  Most of my virtual machines running XP 32 bit and have been initially created for my 3 platform.

  When I move my machines between computers I see that the parameters of the Virtual Machine for my change of processor in (for me)
  in unpredictable ways. Sometimes it shows 1 processor and gives me a choice of up to 4 cores.
  in other cases (always on a 4 base platform) 1 single processor with 1 core, in other cases, with 1 core 2 processors.

  In most cases, my freedom of choice is limited, because the selection of the number of cores is grayed out.

  When I try to make changes by editing the vmx file, I find them ineffective (no change).

  The other problem I think is that my VMs run VERY SLOWLY on my i7 with 8 GB platform!
  I have no idea if this is related to the improper setting of the number of processores / cores (I'm not able to define
  1-4-hearts and spin with settingsd 1.1 instead).

  Could someone please help me understand how:

  1. check / change the number of processors / threads on an existing virtual machine.

  2. how to set properly for an i7 processor

  Thanks in advance,

  Andrew

  1. providers that create virtual machines are in a race - they assume that customers use this version which proposes to use the virtual processors more ;-)
  For some workloads inside a virtual machine - say Oracle or other database and applications servers such that it is sometimes really good idea to use more than one virtual processor

  2. virtual machines to scale differently with more CPU than the real computers.
  Virtual machines are for host applications.
  This means that the host schedules the time CPU to each virtual machine.
  If you follow this thought that you will see that a virtual machine that uses one virtual processor has a greater chance to run then a VM with 2 virtual processors.
  A VM with 4 cores running on a host with 4 cores will spend a lot of wait time - it may work only when the host reports the application of Workstation 4 hearts are available.

  A virtual machine with only 1 vCPU will probably be able to run all the time without any waiting time.
  This is why usually with a single CPU VMs feel better to the needs of the user.

  This translates into the best practical advice: assign a CPU unless you really notice you need more.

  3. probably, you try to change the values, while the virtual machine is suspended?

  4.
  numvcpus = '8 '.
  cpuid.coresPerSocket = "4".

  We hear two processors with 4 cores of each

  numvcpus = "4".
  cpuid.coresPerSocket = "4".

  means a processors with 4 cores

  numvcpus = '2 '.
  cpuid.coresPerSocket = '1 '.

  We hear two processors with a carrot

  No effect? n ' mind that not all clients can use 2 or more processors
  For example, XP is limited in this respect.
  Some guests may also not change the number of CPUS after what they have been installed

• VMware vSphere 4 licenses essential question and the number of processors

  Hi all

  I have a question about the Essentials of VMware vSphere 4.1 license. We have a client interested in a VMware vSphere Essentials license. The machine runs on 2 x processor Xeon 5675 6 c. Now I read somewhere that there was a limitation of the number of processors that can be used with the edition of Essentials. If I remember correctly, the number of physical sockets is limited to 2, but I remember that there is another limit, but I could not find the document describing and wonder:

  Is there a limitation on the maximum number of 4 cores on one physical processor that can or will be used by VMware vSphere 4.1 Essentials or there is a limitation on the number of 4 vCPU that can be assigned to a guest?

  I would like to know because if this is a limitation on the number of vCPU that can be assigned to a customer that would not be a problem because we have no guests in need of vCPU, then 2 more, but if this is a limitation on the number of cores that would be used by VMware vSphere Essentials, it would be a waste of money to buy a 6-Core ;-)

  Hello.

  2 taken with 3 guests, 6 hearts and SMP 4 lanes for virtual machines.

  These limitations are available at: http://www.vmware.com/products/vsphere/buy/small_business_editions_comparison.html

  Good luck!

• CLI to change the number of processors assigned to guest vm

  Is there a vi CLI to change the number of processors assigned to a virtual machine guest?

  the need to reduce number of vCPUs 4-to-1

  Hello

  You can take a look at the discussion.

  It will be useful.

  Concerning

  Franck

• Number of processors and hardware migration

  2 questions:

  I saw this tutorial on how to clone virtual machines for copying just in browser store data and add it to the inventory again.

  Is - this kosher? can it cause problems? Its a freebsd AMD64 bit installation 9.

  Also, is it safe move a virtual machine like that of a desktop computer hp with a core2duo on a hp dl360 xeon?

  And finally, these two machines are quad-cores; should I set the number of virtual processors in vsphere 4 or leave at 1?

  You have to look at what resources they each need, certainly if the production needs of the processing power of 2 vCPUs then giving it 2 and splitting the two other the dev and the sandbox would probably be best. If the capacity of the pre implementation planning is not possible start us with 1 vCPU by machine in our environments and increase if needed.

  The majority of virtual machines, I've worked on that have been very well when the scaling vertically with the number of processors, but as I said, it's especially windows and red hat. This message speaks to the situation for Windows Server 2003, but I imagine that there will be some similarities. http://communities.VMware.com/thread/29415

  I think you really need to test, to perhaps build a single vCPU system. From a 4 to a vCPU 2 should be good because they will always use a multiprocessor driver.

  I hope this helps!

• Optimal number of processors/cores for guests?

  On a host with a processor i5-3337U (2 cores, 4 threads via hyperthreading) and assuming that guests can use all the power of the CPU it can get, which is the ideal maximum number of CPUs or cores should I assign to a guest without compromising the overall performance of the host or the guest?

  I'd say 2vCPUs for comments. As your processor has just two logical cores, it will not be able to take a load with the crowd using the processor (assuming you have Windows 7). It also depends on the type of load, that you run on the VM guest.

  If you say that the host will not consume a lot, then you could go up to 4vCPUs.

• ESXi 3.5 maximum number of processors

  Hi all

  The maximum configuration or more exactly, I found a table (table 3, page 4) that contains information about the maximum in looking ESXi documentation, calculate for ESX systens.

  I would like to know about this line:

  "Number of cores per server 32.

  This means that the limit for ESXi systens are 32 hearts regardless of the processor how much I runing on my server?

  For example:

  A server with xeon quad processors 4 four is equal to a base of sixteen 16 server.

  ESXi would work in this server?

  Another example (I know that's not possible, but it's just an example):

  A server equipped with 8 eight physical processors, a carrot by processor.

  ESXi would work in this server?

  Resume, I would like to know what is the real maximum limitation of a number of ESXi Server (free ESX edition) of processors (cores).

  I just want to be sure about this before buying a server with 4 processors with the cost of the car...

  Thanks in advance for any assistance.

  o /.

  AJ

  Maximum number of cores per server 32 (ESX 3.5 and ESX 3.5i)

  http://pubs.VMware.com/vi301/install/wwhelp/wwhimpl/common/html/wwhelp.htm?context=install&file=install_requirements.4.10.html

• Number of processors and cores in AWR report

  Hello

  I have a report AWR to my system and a couple of entries confuse me.

  Q1. It's showing 3 carrots, 2 Sockets and 4 processors. The CPU and the Sockets, I understand that 2 chips with 2 processors per chip so 4 CPU.

  What confuses me, is the fact that it shows 3 carrots. Is that that by CPU cores? Othererwise 3-4 makes no sense?

  Q2. What is the difference between DB, time CPU and CPU DB?

  My understanding is that DB time is the time used by the process, including the time processor and wait time. Because a system can have more than one processor, it is quite natural that DB time may exceed to elapse time - since you have multiple processors that contribute to this time (I guess that DB time cannot be really more time elapse * our processors?)

  In fact, you could say if DB time does not exceed the time to elapse, then you have a Nock idle system?

  My understanding of time CPU, is that it's time where each process actually gets treatment CPU (so it does not time-out). I think that the AWR report confusingly used the term time CPU and CPU DB, to mean the same thing?

  clearly greatly appreciated

  Jim

  
  

  Hi Jimbo,

  Q1. "Nuclei" in the CWA report represents the quantity of physical processor cores and the "processors" takes into account the simultaneous multithreading so in your case, one option could be a CPU Socket has a dual core (not type hyperthreading) and the other CPU Socket has one heart (hyperthreaded). If this is the case, you will have 3 physical 4 CPU cores, (because it takes into account the hyper-threaded architecture) and 2 taken. It's just an option, you will need to check it out.

  Q2. No-Idle wait events are events that are not classified by Oracle as a "Idle" of events to wait wait:

  • Example of Idle wait-event: SQL * Net client message (server process is waiting for the client process to do something)
  • Idle wait-event example: db file scattered read (event waiting user IO representing a multilock read as full scan of the table or full scan small index.
  • You can get a complete list of active waiting events by running:

  Select name from v$ event_name where wait_class <> "inactive".

  • You can get a full list of the events of inactive waiting by running:

  Select name from v$ event_name where wait_class = 'Idle '.

  
  

  DB time is therefore the sum of all events of active waiting and also the CPU time that is a statistic:

  • You can see the value of the amount of time CPU in 10s of miiliseconds (centisecondes) for an exeuting session:

  SELECT THE VALUE

  FROM v$ sesstat JOIN v$ statname USING (statistics #)

  WHERE name = 'CPU used by this session' AND SID =

  • You can see the value of the time total CPU in 10s of milliseconds (centisecondes) for the instance of exeuting:

  SELECT the value from v$ sysstat

  WHERE name = 'CPU used by this session.

• Number of processors Question

  As always, thanks for the help I get out here.

  I have a simple question. If I have a Quad Core machine, then I have four processors available for assignment to the VM, I create.

  Can I connect 2 processors to VM and 2 to VM B and 4 C of the VM? 2 + 2 + 4 = 8. Is this ok to do?

  I thought that if I have 4 processors available I can only assign, for example, 1 CPU to each of four virtual machines. Is this bad?

  Thank you.

  Mike Gallery

  Yes, you can approve the processors in your ESX/ESXi host with vSphere 4 that you can average vCPUs per core - its impact on performance is will depend on the CPU load required by the virtual machine - also to highlight good practices is always to start with a single vCPU and add additional if necessary - from 4 to 8

• I need to reinstall or reconfigure the FMIS parameters increase my number of processors

  We have recently upgraded to a single processor Xeon 2 x Xeon processor. I have installed FMIS v4.5 . Please tell me this will configure added CPU itself, or do I have to reinstall or reconfigure all the settings of my FMIS to make optimal use of my new processor? If Yes, then where I can reconfigure the same.

  concerning

  Vibes

  Hello

  I don't think so. However, you may want to restart the server...

  It's new policy of the FMS 4.5 license http://www.adobe.com/products/eula/flashmediaserver/multicorepolicy/

• Oracle DB and number of processors

  Hello
  in 8i (8.1.7.4 on Win server 2003), how oracle manages the number of CPU on the server where the database is hosted?
  Is there any initial setting for it?
  
  Thanks in advance.

  I have no idea, but maybe you can find some info here:

  http://www.Oracle.com/technology/documentation/Oracle8i.html

• Crackling sounds on Pavilion x 360: implementation number of processors as '4'

  I have this problem and have tried to follow the advice to set the process to '4', but the drop-down list only has the option to "1" or 2 ".  '2' parameter does not resolve the issue.  I use a x 360 11 "Pavillion I had only a few months, and it is impossible to watch/listen to anything online because of the crackling.  Very upset, especially because I chose the audio because ofht 'beats' model that was supposed to give me a quality sound.

  Hi @JoanneLi,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your constant of laptop HP Pavilion x 360 sizzling/buzzing noise.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on the speakers.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window. Restart your laptop and try the sound.

  You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Reboot the laptop twice to make sure that all updates are completed.

  I recommend to restore the default BIOS settings. You could restore the BIOS withthis document by selecting the reload the default BIOS settings. This helped other people.
  
  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below!
  
  Thank you.

• Number of processors to assign to the virtual machines (and a few other questions)

  Hello

  I have a server with two nuclei. When I create virtual machines (currently three) I assign only a single core. Which is better in a point of view of performance? Should I rather give each virtual computer? Do the operating system support (Windows Server 2003) this change later?

  Also, I currently see all status flags to the unknown Configuration-Display tab. They use to display a green dot. No idea why this is happening?

  And finally, does it really matter if a virtual machine is running x 86 och x 64? I mean, so the host I can understand that there might be a lot of RAM, but for virtual machines?

  Thank you!

  Bolgard wrote:

  I have a server with two nuclei. When I create virtual machines (currently three) I assign only a single core. Which is better in a point of view of performance? Should I rather give each virtual computer? Do the operating system support (Windows Server 2003) this change later?

  There are recommendations on the virtual CPU possiblity in the manual. Get it, read...

  If you have 'only' a dual core, do not assign more than one vCPU to any guest.

  Also, I currently see all status flags to the unknown Configuration-Display tab. They use to display a green dot. No idea why this is happening?

  Let me guess, you run ESXi on a white box?

  And finally, does it really matter if a virtual machine is running x 86 och x 64? I mean, so the host I can understand that there might be a lot of RAM, but for virtual machines?

  Use all your applications are met. Why install x 64 W2K3 for a 768 MB of RAM with IIS invites and some static Web pages?