Number of the aid format

Similar Questions

• Number of the aid range

  Oracle 11.2.0.1

  create table test (col1 varchar2 (3), col2 varchar2 (4));

  insert into test ('201 ', ' 1234') values;

  insert into test ('201 ', ' 1235') values;

  insert into test ('201 ', ' 1236') values;

  insert into test ('201 ', ' 1240') values;

  insert into test ('201 ', ' 1241') values;

  insert into test ('201 ', ' 1250') values;

  insert into test ('202 ', ' 1251') values;

  insert into test ('202 ', ' 1252') values;

  insert into test ('202 ', ' 1253') values;

  insert into test ('202 ', ' 1254') values;

  insert into test ('203 ', ' 1255') values;

  insert into test ('204 ', ' 1256') values;

  insert into test values ("204", "1257 ');

  insert into test ("204", "1258") values;

  Power required:

  col1 start end total

  201 1234 1236 3 <-because the numbers are of 1234-1236

  201, 1240, 1241, 2 <- then from 1240 to 1241

  201 1250 1250 1 <-one number for the same value of col1

  202 1251 1254 4 <-same as above.

  203 1255 1255 1

  204 1256 and 1258 3

  As indicated above required output, I see numbers continue as starting point at the end of column for the value of col1.  If there is no gap or a single value, it should come in another line.  Kindly help me.

  Hello

  This is a classic method of Tabibitosan: Tabibitosan tutorial Aketi Jyuuzou method

  SQL> with got_grp as
    2  (
    3  select col1
    4        , col2
    5        , row_number() over (partition by col1 order by col2)
    6          - col2 as grp
    7    from test
    8  )
    9  select col1, min(col2) col2_start, max(col2) col2_end, count(*) total
   10    from got_grp
   11   group by col1, grp
   12   order by col1, col2_start;
  
  COL COL2 COL2      TOTAL
  --- ---- ---- ----------
  201 1234 1236          3
  201 1240 1241          2
  201 1250 1250          1
  202 1251 1254          4
  203 1255 1255          1
  204 1256 1258          3                                                        
  
  6 rows selected.
  
  SQL>
  

  Kind regards.

  Alberto

• How to convert number in the Date format

  Hi Experts,
  
  I have a date column says. date key order number (ex: 20110202). How to convert this number in format DD/MM/YYYY.
  
  Thanks in advance
  V

  Vincent Krishna wrote:
  Hi Experts,

  I have a date column says. date key order number (ex: 20110202). How to convert this number in format DD/MM/YYYY.

  Thanks in advance
  V

  SQL> select to_char(to_date('20110202','YYYYMMDD'),'DD/MM/YYYY') from dual;
  
  TO_CHAR(TO
  ----------
  02/02/2011
  

• I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  Sasha,

  What browser (exact version). ?

  Harold Horne MVP on September 24, 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the Windows Update of Windows XP Web site.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center.

  This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely.

  The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

      
  

  UTC/GMT is 14:12 on Sunday, October 28, 2012

• Please tell me what is the format of the serial number on the sleeve should be 24 characters get, so I can download my Photoshop Elements program

  Please tell me what is the format of the serial number on the sleeve should be 24 characters get, so I can download my Photoshop Elements program

  DUS/A.PEPE13.0.WIN.GEN.MUL.ALL

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 8: http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml

  Photoshop/Premiere Elements 9: http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml

  Photoshop/Premiere Elements 10: l http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm

  Photoshop/Premiere Elements 11: l http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm         
  Photoshop/Premiere Elements 12: http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

• Display to the specific format number

  Hi all
  
  We want to show the number in the format like this PIC S9 (08) V9 (03)
  
  Example, if we have given input 18 it should show 00000018000. Is there any function to display like this?

  does not work?
  Hmmm

  SQL> SELECT replace(to_char(18.3,'00000099.000'), '.') FROM dual;
  
  REPLACE(TO_CH
  -------------
   00000018300
  
  SQL> SELECT to_char(18.3 * 1000,'00000000000') FROM dual;
  
  TO_CHAR(18.3
  ------------
   00000018300
  
  SQL> SELECT to_char(18.3 * 10000,'00000000000') FROM dual
  
  TO_CHAR(18.3
  ------------
   00000183000
  

  Published by: Alexandr on April 8, 2011 02:55

• conversion of a number in the format date

  Hello friends,
  
  I have months (mm), day (dd) and year (yyyy) as decimal/integer numbers.
  
  I want to display in the format in the date format - "MM/DD/YYYY".
  
  Thank you/kumar

  You will need to be more specific in how your format stirng is configured. For example, you could do something like this:

  TO_CHAR(TO_DATE('20110201','YYYYMMDD'),'MM/DD/YYYY')
  

  The SQL Reference to http://tahiti.oracle.com for your version of Oracle has all valid date format patterns.

• How to get the text formatting in the tables

  Dear experts and aid

  For my project, I import an RTF file and then read the data into 3 tables. It works fine when just using the contents of the string of paragraphs. However, the final script should be able to read and to replace the text formatted...
  Why use intermediate tables? Because otherwise I need to swap between two fm-documents (and you can be a part of the book).

  The imported file starts with a certain number of lines separated into two parts by a TAB ("designates a TAB in \x08 FM)
  [[Garneau, 1990 #12]]    »   [9]
  The good article can also be locally as text, e.g. [9]
  Then follow the same (or smaller) number of paragraphs with text formatted like this:
  [9]"D. Garneau, ed., National Language Support Reference Manual (national language Information Design Guide. Toronto, CDN: IBM National Language technical Centre, 1990.

  Is it possible to replace in the body of the function below the next song

    while(pgf.ObjectValid()) {
      pgfText = GetText (pgf, newDoc);
      gaBibliography.push(pgfText);
      pgf = pgf.NextPgfInFlow;
    }
  

  with this

    while(pgf.ObjectValid()) { 
      gaBibliography.push(pgf);
      pgf = pgf.NextPgfInFlow;
    }
  

  Do I need a special statement of the gaBibliography range?
  And how to get the right part of the lines as formatted intro thingy in table gaFmtCitsFmt ?

  Currently, I read in the tables as "strings" (function GetText not shown):

  var gaFmtCitsRaw  = [];                           // left column in processed RTF
  var gaFmtCitsFmt  = [];                           // right column in processed RTF
  var gaBibliography= [];                           // bibliography lines from processed RTF
  // filename is something like E:\_DDDprojects\FM+EN-escript\FM-testfiles\BibFM-collected-IEEE.rtf 
  
  function ReadFileRTF (fileName) {
    var nCits=0, nBib = 0, openParams, openReturnParams, newDoc, pgf, pgfText ;
    var TAB = String.fromCharCode(8);               // FM has wrong ASCI for TAB
    var parts = [];
    
    openParams = GetOpenDefaultParams();
    openReturnParams =  new PropVals();  
    newDoc = Open (fileName, openParams, openReturnParams);  
    pgf = newDoc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;  // get first pgf in flow
  
  // --- read the temp/formatted citations  
    while(pgf.ObjectValid()) {
      pgfText = GetText (pgf, newDoc);
      if (pgfText.substring (0,2) == "[[") {        // citation lines start with [[
        parts = pgfText.split(TAB);                 // get the two parts of the line
        gaFmtCitsRaw.push (parts[0]);               // Push the result onto the global array
        gaFmtCitsFmt.push (parts[1]);
        pgf = pgf.NextPgfInFlow;
      } else { break }
    }
  
  // --- read the bibliography
    while(pgf.ObjectValid()) {                      // until end of doc
      pgfText = GetText (pgf, newDoc);
      gaBibliography.push(pgfText);
      pgf = pgf.NextPgfInFlow;
    }
    newDoc.Close (Constants.FF_CLOSE_MODIFIED);
  } // --- end ReadFileRTF
  

  The following questions will then be how to change the script of FindAndReplace of Ian Proudfoot for managing text formatted as replacement. I will need to use the copy and paste IMHO...

  Klaus, okay, before pasting, you must assign the TextSelection object at your insertion point.

  // Add a new paragraph after the current paragraph.
  var newPgf = oDoc.NewSeriesPgf (lastPgf);
  var textRange = new TextRange (new TextLoc (newPgf, 0), new TextLoc (newPgf, 0));
  
  oDoc.TextSelection = textRange;
  oDoc.Paste ();
  

  -Rick

• Need help with the Word format Req'd for RoboHelp

  I was asked to help a company with technical writing for an online application. All their online help is in RoboHelp. I need to create about 450 pages of extra help to complete the help system. The company is owner of RoboHelp, I did not. I understand that Word documents can be imported in RoboHelp. Where can I find the format that word documents should be so that they can be imported successfully into RoboHelp?
  
  Any help would be greatly appreciated.

  Welcome to the forum.

  Importing in RoboHelp Word documents can give rise to a number of problems, as you will see if you take a look at the section about this on my site. The first thing that would answer this question is to know if the company is using HR to Word or HTML HR.

  If they use HR for Word, all you need to do, is make sure that the styles you use in your documents are the standard ones they use to existing aid. Only they can tell you what they want and it is for them to sit down with you to suit the required format. Note that each topic must begin with the heading 1 style. You should also know if they want a document with 450 topics (not recommended) or 450 documents, something between the two.

  If they use HTML HR, then I suggest you create a few sample topics and make import these topics. They need to become familiar with the process and I suggest that they too see the topics on my site.

  In particular, if there are many tables, you should test they import properly.

  The company themselves will have to work closely with you on that in the early stages with several test runs. They must save their project before you import it to save a lot of grief, if things don't quite work.

  I'm sure others can add others.

• Number of the string syntax - padding zeros in keeping the decimal values

  Hello team,

  I'm trying to get a number, paved with up to 3 zeros to the left and keep the two decimal places of it.

  IE: If the number is 6.25 then I want the string "006.25".

  If it's 60.125 I want to make "060.12" (rounded to the hundredth decimal closest)

  I tried using the 'String Format"with variations of differnet from the '% 03d' and '.2f '. but I can't have one the right combination of both of them in a single order. Am I missing something here?

  With the help of LV2011

  Thank you

  Have you tried %06.2f?

• Spectrum Analyzer (Keysight PXA) get the Trace using the binary format

  1. The ASCII format uses drivers. I need binary format. Number of points and many traces.
  
  
  2. This topic in several positions, but do not give a good answer.
  
  
  3. I have attaced my code.
  
  
  4. Visa to read data from binary block. VI has been lifted to another post, but I can't find it to give credit.
  
  
  5. Array of bytes to trace.vi has default data that are extracted from my PXA Spectrum Analyzer. I stole the basic idea, but there is much prettier. To convert the 8-byte doubles, but it doesn't.
  
  
  6. Because I use Windows I use ': FORM:TRACATA %s;: FORM:BORD SWAP; "where %s is real, 64 for the binary data. Don't know if the SWAP is required.
  
  
  7. I have a general idea of how it works, but the details elude me. MSB, LSB exchanged and normal. My eyes is glazed.

  Thanks for any help is good.

  Norm

  Try this. It works well for me.

• chain number by "scan value" format string "%.3f" doesn'work

  I had a little problem.

  "To convert a string to a number, I use the function"scan value"with '%.3f' for the ' format string"connector. I would get a 3 digit number. But this doesn't work with the parameter "%.3f.

  Thank you.

  Please check the syntax of using LV Format specifier. There is a table that describes the purpose of each specifier. When you read in the description "when you use a function in shape", the specifier is applied to the number-> string, when you read "when you use a sweep feature", the specifier applies to the String-> number. The syntax of width element applies to both situations, the. Element of syntax accuracy does not work.

• Calculation of frame rates of acquisition image using the 7 Format

  So I finally got my Basler firewire (IEE1394b) camera to capture images at his rate max (120 fps).

  But to do this, I need to use the '7' Format.... which is a bit confusing to me.  When I use the '7' Format, I can't specify the frame (frames per second) rate.  Apparently, you only specify the parameters (length, width, color / mono) of the image and the size of the packets and a few other things.

  So, how can I calculate speed?  I need to know exactly how much time elapses between each image.  And it must be constant.  I can't have a different frame rate.

  NEITHER told I can calculate the frame rate using this equation:

  

  That comes from this article.

  But I am skeptical because the article also says:

  Please note that the time to transfer an image is slightly faster than the time it takes to acquire an image.
  

  People out there can clarify this for me?  Is the frame rate constant?  And then I actually calculate when using size 7?

  The rate will be constant.  It won't change from image to image.  The difficult part is to find what it is.

  Basler camera manual will tell you how to calculate the frame rate.  There are three different calculations, and gives you the slower pace is one you use.  These calculations are accurate enough, I think.

  Another possibility is to measure the frame rate, but that requires several seconds (or minutes) for a measurement precise.  The simplest method is to start a life-long and save a frame in time at the beginning, wait several seconds (or minutes) and save the time of another framework.  Subtract the chassis numbers, subtract the time and divide to get the frame rate.  With a wait of several minutes, it's extremely accurate.  To get the acquisition time, read an image whose value "Next Image", then save the chassis number and read the msec timer immediately after reading.  Using a flat sequence structure is probably the best to ensure that everything happens in the desired order.  If you loop playback, you will see real cadence cadence converge slowly.  Stop it when it is pretty accurate.

  In a program I wrote, I controlled the pace by setting the shutter exposure time.  I used the derived formula of the Basler manual for cadence and reversed to calculate the shutter speed.  This only works if you have another way to adjust the brightness levels (opening, lighting, etc.).

  Bruce

• Save pictures to the ENVI format

  Hello

  I do the image acquisition using a PCI 1426 acquisition card and the requirement, I have save the images to the ENVI format. When I searched for information on the ENVI format I found this link: http://groups.google.com/group/comp.lang.idl-pvwave/browse_thread/thread/e29deda284a727f1?pli=1

  Apparently, there is a header file in which the information of the captured image are registered. The device that I use is a line scan camera and capture energy strips any (not exactly what it is). What I need to know is, can I save the images captured in ENVI format? If I can, how can I write the header for the file information?

  Thank you

  Sandeep

  I think that I finally understand how to work with / create files Environment. In my application, I have a camera online scan that will scan/capture only a row of pixels in an image. It's like a normal camera, but the resolution of the image in terms of the complete image is an X by 1. In my case 800 X 1. The camera returns actually a 800 X 270 resolution image, but what represents the 270 is 270 bands of energy that the camera caught for that row of pixels. If the camera has captured 270 each resolution 800 X 1-band information.

  Now what happens after this is the case, the camera pivots from one (very small) angle and captures an another 270 information strips. How many groups is captured.

  Suppose that I captured 270 band information in 300 different positions of the camera. That is to say an image of 800 X 270, turn some angle to take another image of 800 X 270, turn a few angle etc... 300 times.

  Now, the ENVI header file should have the information

  Description Environment = {created ENVI file [3/17/20093:47 PM]}

  Samples = 800

  Lines = 300

  Bands = 270

  header offset = 0

  file type = standard Environment

  data type = 12

  Interleave = bil

  sensor type = unknown

  byte order = 0

  wavelength units = unknown

  Allows to observe some important fields from the list above

  (a) samples - it's the horizontal resolution of the image is captured. (800 in the resolution of 800 X 270)

  (b) lines - this represents the number of frames you available for capture. By lines of what this means is the number of lines (rows) that will be present in the final image that we will build with all the information you entered.

  (c) bands - this represents the number of bands of energy that the camera captures in each image, in this example it's 270 (the second part of the 800 X 270).

  (d) the offset of the header - this indicates if there is no header information before each image information.

  (e) type of file - standard Environment (explicit)

  (f) type of data - how many bits is taken to represent each pixel. My camera takes 12 bits to represent each pixel.

  (g) interleave - this indicates how the data is organized in the binary file. Certain amount of explanation is needed here, because there is confusion.

  Any ENVI file is actually two files, the header which has the above information and the second is the information of the image that is defined in the header file. So, the header file is like a map of the information of the image (in binary). Is what I'm doing, I capture a series of images and write a binary file. Thus, the first line in the binary file will be the first band of the first image, which is the first line of the 1st image of band. The second row will be the second strip of the first image that is in the 1st row of the second image of the band. The 270th line is the 270th band of the first image, which is the first line of the 270th band image. 271st ranked is the first group of the second captured image will be the second line of the 1st image of band etc.

  Therefore, we receive 270 (number of bands) resolution images 800 X 300 of 300 images in resolution 800 X 270. Each of the final pictures will be a bunch of information value. A row of PIX of each of the 300 images form a final image.

  This link has a lot more information about Environmental format images http://groups.google.com/group/comp.lang.idl-pvwave/browse_thread/thread/e29deda284a727f1

  There are many more parameters as those explained above, but the above are sufficient to start.

• Convert a CD of Live File Format to the mastered Format?

  I have put some photos on a CD but realized I had burned their direct file not mastered format.  Can I change the format of a CD live file formatted with the mastered format?  I have Vista, and the Windows box that opens is NOT-help, he told me to use the tabs do not appear in Vista.  Help, please!

  Hello Momto2,

  Thank you for posting.  The steps that you talk in aid only appear when you place media (disc) Virgin in the drive.  Once you format the disk, formatting can be changed, unless you use a rewritable disc.  So to answer your question, the only way to have the other type of format is using another drive and recreate the CD.

  I have included the following steps and please let me know if this helps you.

  Zack

  Before that you can copy files to a CD or DVD, the disc must first be prepared using a process called formatting. There are several ways to format a CD or DVD drive. The choice of format determines which computers and other devices will be able to read the disc.

  1. Insert a disc into your computer's DVD or CD drive.

  2. In the dialog box that appears, click on burn the files to disc.

  3. In the engraving, a disc dialog box, type a name for your new drive.

  4. Click Show formatting options, and then click one of the following formatting options:

     • Live file system

     • Mastered

  5. Click next to prepare the drive.

     Now you can copy files to your drive using whatever method you have selected.

  Microsoft Answers Support Engineer