Similar Questions

• Problem using HP Connect with my HP Photosmart C410

  I try to use my printer HP Photosmart C410 HP Connect applications. I can add the device, but none of the applications seem to work with my printer It' was not THAT old. Any suggestions?

  

  HI beachgrl,

  Welcome to the HP Support forums.  I understand you want to learn what printable sheets are available for your printer Photosmart C410 in connected HP.

  Once you are connected to your connected HP account, if you type the link below into the address bar of your browser, it takes you to a page that shows the pads that you already have on your printer. Under the section "printable recommended" there is a search function.  If you type in your printer model it will list available for the Photosmart C410a platelets. The results will be grouped by category.  I've included a screenshot.

  The address that you need to type in the address bar of your browser is https://printables.hpconnected.com

  

• Series HP Photosmart Prem C410 - connection problems

  I have a printer HP Photosmart C410 series connected via a wireless network to a Sony Viao laptop.

  I have regular problems connecting the printer to the PC - I think it started when I updated the PC operating system to Windows (from Windows 8) 8.1 (I think) about six months ago.

  Sometimes, the printer works fine. But often it is not. It shows the printer as offline, even if it is on, with the wireless light illuminated. Sometimes, if I reboot the system, it will not work then. But it can take several attempts and is not reliable.

  Sometimes, when I go to see what's printing, there is a check mark next to use printer offline. If I remove this tick, documents are printed sometimes then. But sometimes they are not. I can't work out how to set the printer online when everything is apparently turned on and connected. Often when I go to print a document, a window pops up saying: the printer is offline. Sometimes the document print in any case. Sometimes it doesn't.

  The scanner function works fine, so I don't think it's as simple as the connection works do not at all. I regularly scan documents and have no problem with that.

  I installed HP Print and Scan doctor. Whenever I try to use it, it tells me I have to install the software. I try to install the software, but it doesn't seem to help - and he wants to download the same software next time.

  I am extremely frustrated with this situation. I have a relatively new and high-quality printer and a laptop and yet cannot rely on the ability to print things quickly. I searched in the online forums and tried various suggestions here but without success.

  I tried to uninstall all previously installing the printer and reinstall it, but that did not help.

  Your help will be greatly appreciated!

  Hi JamesWHT,

  Welcome to the HP Forums! I see that you have regular problems connecting your HP Photosmart C410a to your PC. I'm happy to help you!

  Please, try the following:

  • Uninstall the software. Uninstalling the printer software.
  • Re-install using the printer HP install wizard for Windows.
  • Take a look at this guide wireless, just in case. The printer keeps Wi-Fi connection.

  Hope this helps and have a great day!

• Photosmart c410 printing blank pages

  I have a photosmart c410, macbook pro 0sx 10.7.5. T10.7.5. all was swell but all of a sudden my printer put the blank pages.  I can't even test page to print

  Sorry for the delay.  Try to run a printhead, cleaning the printer.  Who needs traffic as it should still ink.  The steps below come from the document Troubleshooting print quality problems .

  Step 3: make sure that the cartridges are properly ventilated.

• Photosmart C410 [6396F5]: Ipad recognizes my HP printer, and then displays an error message

  The printer is recognized, but displays an error and does not print

  Hello @PastorBetts.

  Welcome to the HP support forums.

  I understand that when you try to Airprint for your Photosmart C410, you get an error message.

  I would like to help.

  What is the error message you get?

  Here are some generic troubleshooting steps from apples web site.

  If you can't print to your printer AirPrint

  Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."

  • On your iPhone, iPad or iPod touch, check that your device uses the latest available IOS and the app that you print from is up to date.
  • On your Mac, use software update to update to OS X and applications that you have purchased from the Mac App Store.
  • Check with the manufacturer of your printer to see if the firmware updates are available for your printer model.
  • You can connect an AirPrint device to your network, either by bypass surgery or a direct connection to your Wi - Fi network.
  • AirPrint devices connected to the USB port on the Apple AirPort base station or Time Capsule AirPort use AirPrint. If your printer includes AirPrint, connect it directly to your Wi - Fi network or Ethernet LAN port on your Base Station to print wireless.
  • After turning on your printer, wait a few moments before trying to print. Some printers may take a minute or two after power to join your network.

  You will also find useful information in the following document.

  HP wireless printers compatible AirPrint - print on a wireless network with Apple AirPrint FAQs

• can not see Add targets and devices in the Project Explorer

  Hello!

  I think I have a strange question. I have the evaluation version of Labview 2010. I am trying to add my cRIO 9004 to a project. I'm just trying to follow the instructions in the getting started with manual cRIO. It is said, add crio to the project by project root right clicking and selecting NEW > ADD TARGETS AND DEVICES. The problem is I can't see the link to the NEW, but once I click that I see not a link under "add new target or device" appear, instead, I see the dialog box to open a NEW FILE LABVIEW appear. everywhere in distress forum/basic knowledge/support of shooting and get started articles have mentioned project root right click > select NEW > select Add a target or peripheral >, as if she IS supposed TO APPEAR STANDARD in all new projects! But I'm not! I do not understand what Miss me. The version of software that I have are below:

  the cRio:

  OR VISA 5.0

  NEITHER RIO 3.0
  RT LV 8.6

  and he allied himself with what I installed on my host.

  I can communicate with the device of cRIO times using MAX as well as ping at the windows command prompt command.

  Any help would be great!

  Thank you!

  Rajesh

  After you have installed the evaluation version of LV 2010, you reinstall all of the other drivers, as for the cRIO?

• Photosmart C410 can be configured for bluetooth for my Android Bionic for sending a fax?

  Hello!  I have removed my landline but miss / did not understand how to send a fax.

  I have Windows 7 and have a wireless connectivity for my Toshiba laptop and can connect with USB my phone to my computer if that helps.

  Photosmart c410

  Bionic

  Thank you!

  Hello thewheel.  I understand that you want your phone bluetooth to your printer and use it to send faxes.

  Unfortunately, because of how fax machines work, it will not be possible.  Fax machines work by talking to other devices using the "tones" the phone creates when you press a button/perform action.  Your phone does not have these tones to communicate and thus, does not use them.  This means that your mobile phone and Fax cannot communicate as appropriate to perform this action.

  However, there are services that allow you to send digitally faxes by internet.  Is not the same thing as what you asked, but it is a possibility, in that you can watch.  There are many of these applications then take a look at these Google search results and see if any of them will meet your needs.

  Let me know if you have any questions.  I wish you a nice day!

• Photosmart C410

  I have a Photosmart C410 which worked perfectly until today.  Today I had an out of ink message, changed the cartridges and now get traffic jam everytime I try to print.  I have checked the transport and the paper path and all eyes.  The printer takes the new sheet of paper and it rolls in the printer, but just before the slide in which the printing Assembly slides out, the book stops.  I can open the cover and remove the paper without problem, but he repeates the same problem every time I try to print.  Any ideas would be appreciated.

  Thank you

  I'm sorry you have a problem with the carriage jam error message.

  Here is a link that can help you with this problem.

  http://support.HP.com/us-en/document/c02129180

  Let me know if it helps.

• How to add a trusted device to the two-step verification

  I have setup two-step verification on my Apple ID and there two numbers in place for audits.

  I recently added an iPad to our devices and also restored two iPhones.

  During the installation process, I was able to add these devices secure, so they now get verification numbers sent outside the SMS system.

  Is there a way to add my MacBook Pro as a trusted device too? Currently, I can't get checks him via transfer of text from my iPhone if I send the check to one of the original phone numbers.

  Do the Web to manage Apple ID site:

  https://appleid.Apple.com/account/manage

  Operating instructions here:

  http://www.idownloadblog.com/2015/10/23/Add-remove-trusted-devices-Apple-ID-two-Facteur of authentication.

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

• What does "an error occurred while trying to add the selected device: average 0xffffffce.»

  Hello

  "I'm in need of answers get the resolved message."

  "an error occurred while trying to add the selected device: 0xffffffce.

  This happens when I try to add my printer Epson WF 3640 in my queue via WIFI.

  Reset the printing on your Mac - Apple Support System

• Impossible to safely remove external USB HDD - ejection of mass storage device problem

  Hello

  I have a 250 toshiba external hard drive. "When I go safely remove device and click on stop, guests me that ' ejection of mass storage device problem and try later.

  Is there a reason for this? As I have heard it is dangerous to pull the cord without stopping it first.

  This happens usually when something is always access to the USB - HDD.
  Yes, it s dangerous to pull on the cable, because you can lose some data and the file system may be damaged. But if you have a situation where you need the drive to take with you and want to just get out the cable to the USB port there is a little trick to disconnect the security apparatus:

  Do right click on 'My Computer'-> click on Hardware-> click "devicemanager"-> go into "diskdrives"-> then you need to click on the drive that is your USB - HDD-> with the right button and then click on 'Properties'-> in the menu properties of this drive, you must go on "policies" and click on "optimize for quick removal"-> and then click OK and exit this menu and all-> perform a reboot-> closing information fact. :)

  After that, it s safe for remove you your drive even if it s not ejected. :)

  Welcome them

• Photosmart 7520 even ADF Premium PhotoSmart C410?

  Hi all

  The port of fax on my PhotoSmart C410 appears to be dead and unfortunately we still need send faxes from time to time I'm looking to replace the C410.  It seems that the PhotoSmart 7520 is the replacement so my question becomes use the 7520 the same mechanism as the C410 ADF? The ADF C410 never worked modernizations, so we had to hold and manually it help feed everything we wanted to analyze and/or fax.  I placed a number of technical support calls when we bought first, but was never able to operate reliably.  So if the 7520 uses the same companents ADF then I'll have to look for another provider.

  Thank you.

  Hello

  They do not use the same part. The 7520 use part #CQ733-60015 and the C410 part #CC334-60007

  Kind regards.

• How can I get windows XP to talk to my new HP photosmart C410 series printer all in one? -Thank you

  When I try to install my new HP Photosmart C410 series, it gives me an error message: HKEY_CLASSES_ROOT\CLSID\ {000C101C-0000-0000-C000-00000000006}.    I tried to install several times with the installation CD and the HP Web site.

  I contacted HP technical support, but they were not able to help me.  If this is not resolved, I will run the new printer to the store.

  Thank you

  Please provide the full error message.  Also, make sure that you typed correctly - are you sure that the CLSID does not stop with "46" rather than simply "6"?

  You can also follow the steps in the following article to clean things up and try again: One Article

  • Make sure that you install the printer by using a user account with "computer administrator" privileges (if you are not sure, click Start > Control Panel > accounts of users, under the name of each account will be "Computer administrator" or "Limited account").
  • Do not connect the printer to the computer until you are prompted to do so.

• Peripheral Audio USB-Mulit-channel has a driver problem and PnP device problem.

  I try to use the blue ice pre - amp for recording. Under channel-Mulit-USB Audio Device, device status, it displays "this device cannot start. (Code 10) "once I start the troubleshooting process it shows that even after reinstalling the driver it still does not work and that there is a problem with the device PnP I already tried to uninstall the driver and restart my laptop to let windows try again but nothing works.  Please help D:! Thank you all very much! :]
  -Kyle

  Hello

  1. is this problem limited with a specific USB device?

  2. it worked before?

  3. using this unit for the first time on this computer?

  4. the other USB devices work properly?

  Method 1: Run the troubleshooter and see if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update the chipset drivers and the USB controller

  Follow the given article below for more information.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  In addition, update the driver from the manufacturer's Web site and see if it helps.

  Method 3: Uninstall and reinstall the USB drivers and check if the problem persists

  1 disconnect all USB devices except the USB keyboard and mouse.

  2. click on start and type device manager in the start search box and press ENTER.
  3. Select the Device Manager and a pop-up window will Device Manager.
  4. click the + on controllers USB Bus to develop it.
  5. right click on all controllers USB and USB Root Hub that is listed, and select uninstall.
  6. restart the computer.
  7. plug in the appliance and check if it works.
   
   
   
   
  I hope this helps.

• External device problem - "YOU NEED of PERMISSION to PERFORM THIS ADMINISTRATIVE TASK" & after I click 'YES' it says "DESTINATION FOLDER ACCESS IS DENIED."

  Original title: external device problem

  Whenever I connect any external devices like pen drive & sdcard, I can't write anything in them, that they are not protected in writing! But I can copy things from them, but I can not cut & paste anything on their part in my system. I can only copy & paste. Whenever I try to write anything he says 'YOU NEED of PERMISSION to PERFORM THIS ADMINISTRATIVE TASK' & after I click 'YES' it says "DESTINATION FOLDER ACCESS IS DENIED." When I tried to format these devices, he says "YOU do not HAVE ENOUGH PERMISSION to PERFORM THIS OPERATION".

  Please help me!

  Sriram salvation,

  Have you tried the suggestions in the previous answer?

  I suggest you to disable the antivirus application and check the status of the issue. Refer to the following steps:

  a: you should see an icon for your Antivirus program in the taskbar notification area. It is usually at the bottom right of your desktop.

  b. click the third-party security software, you will see a pop up.

  (c) in this pop and select the option to disable, click on it.

  d. now third-party security software will be disabled.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Please let us know if you need assistance.