Number of VPN client

Similar Questions

• Number of VPN clients behind a PIX 501, restriction?

  Is there a restriction in the number of VPN clients can be behind a PIX 501. Is is just limited by the number of hosts (10, 50, Unlimited)?

  Hello

  Behind a PIX VPN clients. Will you use NAT - T (must). It will be limited only to the number of users (normal users) through the PIX. So if you have a license to use 10 or 50 then the VPN connection is counted in this list.

  Connection VPN Client through PIX is not IKE tunnel. They are normal UDP500 and UDP4500 peers.

  Vikas

• ASA5505 - Maximum VPN Clients

  Hey all, any idea what the maximum number of VPN clients can connect to the ASA5505? It runs to the base image. Thank you, robert.

  The devices allowed for this platform:

  The maximum physical Interfaces: 8

  VLAN: 3, restricted DMZ

  Internal hosts: unlimited

  Failover: disabled

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Peer VPN: 10

  WebVPN peers: 2

  Double ISP: disabled

  Junction ports VLAN: 0

  This platform includes a basic license.

  Yes, apparently your interpretation is correct. If you have a race box you lab this place and see what happens after the grid of th 11' client attempted to connect. Most likely the client wil see an error message.

  Please rate if useful.

  Concerning

  Farrukh

• Problems to connect via the Cisco VPN client IPSec of for RV180W small business router

  Hello

  I tried to configure my router Cisco of RV180W as a customer VPN IPSec, but have encountered a problem that I hope someone can help me with. "" I managed to do the work of configuration so that the Cisco's VPN IPSec client authenticates successfully with the XAUTH user, I put on the router, but during the negotiation, the client ends with the following, which appears several times on the router error message: ' Mar 20 Oct 19:41:53 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [34360] has no config mode.

  I've read around the internet and a number of people seem to say that the Cisco VPN Client is not compatible with the router, but the same thing happens to my iPhone VPN client.

  Is it possible that this can be implemented? Below, I have attached the full configuration files and the log files. Thank you much in advance.

  Router log file (I changed the IP addresses > respectively as well as references to MAC addresses)

  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: floating ports NAT - T with counterpart > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] WARNING: notification to ignore INITIAL-CONTACT > [44074] because it is admitted only after the phase 1.
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [4500]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received unknown Vendor ID
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received Vendor ID: CISCO-UNITY
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT detected: is located behind a device. NAT and alsoPeer is behind a NAT device
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: request sending Xauth for > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association established for > [4500] -> [44074] with spi =>.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REPLY' of > [44074]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: login successful for the user "myusername".
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser connected from the IP >
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: sending of information Exchange: Notify payload [10381]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REQUEST' of > [44074]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: ignored attribute 5
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28683
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28684
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: remove the invalid payload with doi:0.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: purged-Association of ISAKMP security with proto_id = ISAKMP and spi =>.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser Logged Out of the IP >
  Mar 20 Oct 20:03:16 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association deleted for > [4500] -> [44074] with spi =>

  The router configuration

  screen_shot_10-20 - 15_at_09.00_pm.png

  

  IKE policy

  screen_shot_10-20 - 15_at_09.00_pm_001.png

  

  screen_shot_10-20 - 15_at_09.01_pm.png

  

  VPN strategy

  screen_shot_10-20 - 15_at_09.02_pm.png

  

  screen_shot_10-20 - 15_at_09.02_pm_001.png

  

  Client configuration

  Hôte : < router="" ip=""> >

  Authentication group name: remote.com

  Password authentication of the Group: mysecretpassword

  Transport: Enable Transparent Tunneling; IPSec over UDP (NAT/PAT)

  Username: myusername

  Password: mypassword

  Please contact Cisco.

  Correct, the RV180 is not compatible with the Cisco VPN Client.  The Iphone uses the Cisco VPN Client.

  You can use the PPTP on the RV180 server to connect a PPTP Client.

  In addition, it RV180 will allow an IPsec connection to third-party customers 3.  Greenbow and Shrew Soft are 2 commonly used clients.

• The VPN client VPN connection behind other PIX PIX

  I have the following problem:

  I wanted to establish the VPN connection the client VPN to PIX on GPRS / 3G, but I didn t have a bit of luck with PIX IOS version 6.2 (2).

  So I upgraded PIX to 6.3 (4) to use NAT - T and VPN client to version 4.0.5

  I have configured PIX with NAT-T(isakmp nat-traversal 20), but I still had a chance, he would not go through the 1st phase. As soon as I took nat-traversal isakmp off he started working, and we can connect to our servers.

  Now, I want to connect to the VPN client behind PIX to our customer PIX network. VPN connection implements without problem, but we can not access the servers. If I configure NAT - T on the two PIX, or only on the customer PIX or only on our PIX, no VPN connection at all.

  If I have to connect VPN client behind PIX to the customer's network and you try to PING DNS server for example, on our PIX, I have following error:

  305006: failed to create of portmap for domestic 50 CBC protocol translation: dst outside:194.x.x.x 10.10.1.x

  194.x.x.x is our customer s address IP PIX

  I understand that somewhere access list is missing, but I can not understand.

  Of course, I can configure VPN site to site, but we have few customers and take us over their servers, so it'd just connect behind PIX VPN and client connection s server, instead of the first dial-in and then establish a VPN connection.

  Can you please help me?

  Thank you in advan

  The following is extracted from ASK THE DISCUSSION FORUM of EXPERTS with Glenn Fullage of Cisco.

  I've cut and pasted here for you to read, I think that the problem mentioned below:

  Question:

  Hi Glenn,.

  Following is possible?

  I have the vpn client on my PC, my LAN is protected by a pix. I can launch the vpn client to connect to remote pix. Authenticates the vpn client and the remote pix makes my PC with the assigned ip appropriate to its pool of ip address.

  The problem that I am facing is that I can not anything across the pix remote ping from my PC which is behind my pix. Can you please guide me what I have to do to make this work, if it is possible?

  My PC has a static ip address assigned with the default gateway appropriate pointing to my s pix inside interface.

  Thank you very much for any help provided in advance.

  Response from Glenn:

  First of all, make sure that the VPN connection works correctly when the remote PC is NOT behind a PIX. If that works fine, but then breaks when put behind a PIX, it is probably that the PIX is PAT, which usually breaks IPSec. Add the following command on your PIX VPN client is behind:

  fixup protocol esp-ike

  See http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/df.htm#wp1067379 for more details.

  If it still has issues, you can turn on NAT - T on the remote PIX that ends the VPN, the client and the remote PIX must encapsulate then all IPSec in UDP packets that your PIX will be able to PA correctly. Add the following command on the remote PIX:

  ISAKMP nat-traversal

  See http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/gl.htm#wp1027312 for more details.

  NAT - T is a standard for the encapsulation of the UDP packets inot IETF IPSec packets.

  ESP IPSec (Protocol that use your encrypted data packets) is an IP Protocol, it is located just above IP, rather than being a TCP or UDP protocol. For this reason, it has no TCP/UDP port number.

  A lot of features that make the translation of address of Port (PAT) rely on a single to PAT TCP/UDP source port number ' ing. Because all traffic is PAT would be at the same source address, must be certain uniqueness to each of its sessions, and most devices use the port number TCP/UDP source for this. Because IPSec doesn't have one, many features PAT fail to PAT it properly or at all, and the data transfer fails.

  NAT - T is enabled on both devices of the range, they will determine during the construction of the tunnel there is a PAT/NAT device between them, and if they detect that there is, they automatically encapsulate every IPSec packets in UDP packets with a port number of 4500. Because there is now a port number, PAT devices are able to PAT it correctly and the traffic goes normally.

  Hope that helps.

• VPN clients cannot access remote sites - PIX, routing problem?

  I have a problem with routing to remote from our company websites when users connect via their VPN client remotely (i.e. for home workers)

  Our headquarters contains a PIX 515E firewall. A number of remote sites to connect (via ADSL) to head office using IPSEC tunnels, ending the PIX.

  Behind the PIX is a router 7206 with connections to the seat of LANs and connections to a number of ISDN connected remote sites. The default route on 7206 points to the PIX from traffic firewall which sits to ADSL connected remote sites through the PIX. Internal traffic for LAN and ISDN connected sites is done via the 7206.

  Very good and works very well.

  When a user connects remotely using their VPN client (connection is interrupted on the PIX) so that they get an IP address from the pool configured on the PIX and they can access resources located on local networks to the office with no problems.

  However, the problem arises when a remote user wants access to a server located in one of the remote sites ADSL connected - it is impossible to access all these sites.

  On the remote site routers, I configured the access lists to allow access from the pool of IP addresses used by the PIX. But it made no difference. I think that the problem may be the routes configured on the PIX itself, but I don't know what is necessary to solve this problem.

  Does anyone have suggestions on what needs to be done to allow access to remote sites for users connected remotely via VPN?

  (Note: I suggested a workaround, users can use a server on LAN headquarters as a "jump point" to connect to remote servers from there)

  with pix v6, no traffic is allowed to redirect to the same interface.

  for example, a remote user initiates an rdp session for one of the barns adsl. PIX decrypts the packet coming from the external interface and looks at the destination. because the destination is one of adsl sites, pix will have to return traffic to the external interface. Unfortunately, pix v6.x has a limitation that would force the pix to drop the packet.

  with the v7, this restriction has been removed with the "same-security-traffic control intra-interface permits".

  http://www.Cisco.com/en/us/partner/products/HW/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

• 1811 and VPN Client

  I'm trying to connect to my router Cisco VPN Client 4.8 of Pentecost Cisco1811 Pentecost rsa - sig (certificate). On the Cisco VPN Client I resive username request I spend. When I insert them on the 1811 I resive this message on the console

  % CRYPTO-6-VPN_TUNNEL_STATUS: Group: does not exist

  My ios config is:

  AAA new-model

  !

  !

  local VPNUSER AAA authentication login

  local AAA VPNUSER authorization network

  !

  AAA - the id of the joint session

  !

  resources policy

  !

  !

  !

  IP cef

  No dhcp use connected vrf ip

  DHCP excluded-address IP 192.168.10.1

  !

  SDM-IP dhcp pool pool

  import all

  network 192.168.10.0 255.255.255.0

  default router 192.168.10.1

  Rental 2 0

  !

  !

  no ip domain search

  "yourdomain.com" of the IP domain name

  !

  ! Crypto pki token by default user pins *.

  Crypto pki token removal timeout 30 default

  !

  Crypto pki trustpoint TP-self-signed-2095781077

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 2095781077

  revocation checking no

  rsakeypair TP-self-signed-2095781077

  !

  Crypto pki trustpoint CA_Server

  Terminal registration

  Serial number no

  full domain name no

  IP address no

  password

  name of the object O = 5100, OU = customs, CN = ROUTER1

  revocation checking no

  rsakeypair SDM-RSAKey-1180596453000

  !

  !

  TP-self-signed-2095781077 crypto pki certificate chain

  string CA_Server crypto pki certificates

  !

  crypto ISAKMP policy 10

  BA 3des

  Group 2

  ISAKMP crypto identity dn

  !

  ISAKMP crypto client configuration group guest_group

  DNS 10.1.1.3

  pool vpnpool

  !

  !

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  !

  Crypto-map dynamic dynmap 10

  game of transformation-ESP-3DES-MD5

  !

  !

  list of authentication of card crypto client vpn_map VPNUSER

  card crypto vpn_map VPNUSER isakmp authorization list

  client configuration address card crypto vpn_map throw

  client configuration address card crypto vpn_map answer

  vpn_map 10 card crypto ipsec-isakmp dynamic dynmap

  !

  What can I do

  What is the OU on the certificate you have for the customer?

  What is guest_group or something else?

  Thank you

  Gilbert

• ASA VPN clients

  I couldn't find the answer to this in google.

  You have to use the anyconnect software or you can use other as openvpn client software to connect to your asa.

  If it is for home, ASAs all equipped with 2 free licenses of AnyConnect Premium.

  You can even set up a VPN SSL without client using those and does not any client software - a simple browser.

  Purchase price for a small number of licenses AnyConnect is very cheap indeed.

  You can use generic third-party clients for IPsec VPN IKEv1 (not for the SSL VPN client-oriented).

• What VPN Client for ASA 5550 AnyConnect Premium connection?

  We have version9 a couple of ASA550 I want to put in place a VPN client for use with remote access to administration.  We have included AnyConnect VPN, Premium license peers 2 so I guess we can just use of Cisco AnyConnect VPN client.  I went to Cisco's Web site and it says that I don't have right to the last Anyconnect VPN Client 4.x but I don't have access to the version 3.x.

  The 3.x client is compatible with the ASA and also Windows 10?

  If Yes, what is the correct file to use, there are many files listed for download in AnyConnect 3.x?

  In addition, what is the difference between the AnyConnect 3.x and 4.x customer and why Cisco restricting 4.x?

  Jim

  AnyConnect 4.x has changed the licensing model. AnyConnect 4.x licenses are term based licensing vs perpetual 3.x. There are a number of other differences, mainly due to there being only two license types - more and Apex - no Mobile plus, Advanced Endpoint Assessment, shared VPN etc. Cisco offers a nominal or no license cost of migration until the end of 2015. (depending on what you have: positive Essentials or Apex at premium)

  AnyConnect 3.1 will work with Windows 10 and the latest version of the Software ASA (since Version 3.1.10010). Reference:

  http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/ANYC...

  There are two ways it is distributed - as a stand-alone installation or package for the distribution of the ASA station. Both come in Windows, Mac OS X and Linux distributions. For a Windows client, you must use either:

  AnyConnect-Win-3.1.12020-pre-deploy-K9.ISO

  AnyConnect-victory - 3.1.12020 - k9.pkg

  .. .to the current version of these respective form factors.

• VPN Client AnyConnect 5 migration

  Dear community

  We are migrating the old Cisco VPN Client 5-Cisco AnyConnect.

  I have a couple of ASA-5510 9.1 (1) running the code with a license Base and in the current configuration, all remote users is in the VPN using standard methods of IKE/IPSec with their laptops (no split tunneling, nothing fancy). The VPN Client currently has a profile that is imported into each user's computer and has a pre-shared key that is stored, the solution works very well.

  Management has decided to go for the more AnyConnect version, rather than Apex which I believe meets all our requirements (preview here: http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect40/feature/guide/anyconnect40features.html).

  I have three questions about the migration of Client AnyConnect VPN:

  (1) currently my ASA shows that AnyConnect is disabled (see attached screenshot to see the version). Can I upgrade the license on my ASA? If what comes with AnyConnect or do I need to order it separately?

  (2) is it possible to use the AnyConnect VPN Client VPN profile or should I create a new one?

  (3) can someone direct me to a guide for remote access VPN configuration using the rather than the old VPN Client AnyConnect client? Are there any caveats / pitfalls, I should be aware of?

  Thank you very much!

  Best regards
  Martin

  1 order the AnyConnect license you will get a PAK that you can redeem on the auto-serivce portal to get an activation key for your ASA. (You will need the serial number ASA as well.) This will allow you to "Essentials" AnyConnect (former name for more have together (which now includes Mobile), more or less) and allow you to run the command "anyconnect essentials".

  2. the old style IPsec profiles channel not again SSL VPN ones.

  3. There are many many of them out there. If you are new to it, you can find Pete Long message on the blog useful How - to's:

  http://www.petenetlive.com/kb/article/0000069.htm

• Only permitted in specific protocol like RDP remote VPN client

  Hi, is it possible allow or restrict vpn clients to a specific protocol such as RDP to the authorized network (internal)? Most of the samples in Cisco allows the IP Protocol on the access list of the network of the boarding school for the IP pool which is then translated as Nat (0). I tried to only allow the RDP Protocol in this access list and it does not work.

  Thank you.

  Hi vivi, unfortunately vpn-filter is not posible in codes 6.x, this feature was introduced in the code 7.x and higher. You need to upgrade code 7.x or higher.

  http://www.Cisco.com/en/us/docs/security/ASA/asa70/command/reference/TZ.html#wp1281154

  On the other hand if you already have a group of tunnel for the vpn clients and you want to limit all this tunnel RDP group only and nothing else you do with your current code with an acl, not permit ip address but permit tcp and tcp port number port on vpn network host of destination... but this policy applies to all users of RA for this group of tunnel... no practice... as supposed using vpn-filters by user who allows to better control the individual users on the same group of tunnel without affecting others.

  Concerning

• Terminating the VPN client on 871W

  Hello

  I tried to install EasyVPN on a cisco 871W by SDM. The goal is to finish the VPN client with authentication with an external RADIUS/advertising (on a local subnet). I implemented the IAS on a win2003 Server advertising and checked the accounts.

  SDM was missing the 'crypto map' piece of config. After you add this in the CLI it still didn't work. Thus, EasyVPN is not as easy at is sounds...

  Could someone with some knowledge of VPN and IPsec and so forth please look at this config? Maybe it gives me an idea of what I did wrong (which, without a doubt, must be the case).

  Thank you

  Erik

  ==

  AAA new-model
  !
  AAA rad_eap radius server group
  auth-port 1645 10.128.7.5 Server acct-port 1646
  !
  AAA rad_mac radius server group
  !
  AAA rad_acct radius server group
  !
  AAA rad_admin radius server group
  !
  AAA server Ganymede group + tac_admin
  !
  AAA rad_pmip radius server group
  !
  RADIUS server AAA dummy group
  !
  AAA authentication login default local
  AAA authentication login eap_methods group rad_eap
  AAA authentication login mac_methods local
  AAA authentication login sdm_vpn_xauth_ml_1 local
  AAA authorization exec default local
  AAA authorization ipmobile default group rad_pmip
  AAA authorization sdm_vpn_group_ml_1 LAN
  AAA accounting network acct_methods
  action-type market / stop
  Group rad_acct
  !
  !
  !
  AAA - the id of the joint session
  clock timezone MET 1
  clock to DST DST PUTS recurring last Sun Mar 02:00 last Sun Oct 02:00
  !
  Crypto pki trustpoint TP-self-signed-1278336536
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1278336536
  revocation checking no
  rsakeypair TP-self-signed-1278336536
  !
  !
  TP-self-signed-1278336536 crypto pki certificate chain
  certificate self-signed 01
  3082024A 308201B 3 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
  69666963 31323738 33333635 6174652D 3336301E 170 3039 31303237 32313237
  32395A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 32373833 65642D
  33363533 3630819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
  81008B 56 5902F5DF FCE1A56E 3A63350E 45956514 1767EF73 FEC6CD16 7E982A82
  B0AF8546 ABB3D35A B7C3A7E3 3ACCB34A 8B655C97 F103DBD5 9AAEFEFC 37A 02103
  4EFC398B 0C8B6BE5 AD3E568E 6CB69F87 CBCA0785 EAED0A28 726F2F0A B0B0453E
  32E6B3B7 861F87FA 222197DD 3410D8A9 35939E9B CBF95F20 B8DA6ADE BF460F5C
  BF8F0203 010001A 3 72307030 130101 1 FF040530 030101FF 301D 0603 0F060355
  551 1104 16301482 12444341 4E495430 302E6361 6E2D6974 2E657530 1F060355
  1 230418 30168014 84C9223E 661B2EB4 5BAB0B0E 1BE3A27A 64B3AEB0 301D 0603
  551D0E04 16041484 C9111E66 1B2EB45B AB0B0E1B E3A27A64 B3AEB030 0D06092A
  010104 05000381 8693B 599 70EC1F1A D2995276 F3E4AF9D 81002F4A 0D 864886F7
  17E3583A 46C749F9 38743E6F F5E60478 5B9B5091 E944C689 7BA6DCA2 94D2FBD3
  AFDE4500 A0A3644E 603A852D 55ED7A87 93501D5C 1662DAED 3FFFEC5A F1C38ED4
  E0787561 BA5C14A3 6D065FCF 7DBDEBB6 9186C2D9 AA253FBF A9E38BC3 342C3AC9
  2BEF6821 E4C50277 493AD5B6 2AFE
  quit smoking
  dot11 syslog
  !
  IP source-route
  !
  !
  DHCP excluded-address IP 10.128.1.250 10.128.1.254
  DHCP excluded-address IP 10.128.150.250 10.128.150.254
  DHCP excluded-address IP 10.128.7.0 10.128.7.100
  DHCP excluded-address IP 10.128.7.250 10.128.7.254
  !
  pool IP dhcp VLAN30-COMMENTS
  import all
  Network 10.128.1.0 255.255.255.0
  router by default - 10.128.1.254
  10.128.7.5 DNS server
  -10.128.7.5 NetBIOS name server
  aaa.com domain name
  4 rental
  !
  IP dhcp VLAN20-STAFF pool
  import all
  Network 10.128.150.0 255.255.255.0
  router by default - 10.128.150.254
  10.128.7.5 DNS server
  -10.128.7.5 NetBIOS name server
  aaa.com domain name
  4 rental
  !
  IP dhcp SERVERS VLAN10 pool
  import all
  Network 10.128.7.0 255.255.255.0
  router by default - 10.128.7.254
  10.128.7.5 DNS server
  -10.128.7.5 NetBIOS name server
  aaa.com domain name
  4 rental
  !
  !
  IP cef
  no ip domain search
  IP domain name aaa.com
  inspect the tcp IP MYFW name
  inspect the IP udp MYFW name
  No ipv6 cef
  !
  Authenticated MultiLink bundle-name Panel
  !
  VPDN enable
  !
  !
  !
  username privilege 15 secret 5 xxxx xxxx
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  ISAKMP crypto client configuration group vpn
  key xxxx
  pool SDM_POOL_1
  netmask 255.255.255.0
  !
  !
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  !
  crypto dynamic-map SDM_DYNMAP_1 1
  market arriere-route
  !
  !
  card crypto SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1
  map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1 crypto
  client configuration address map SDM_CMAP_1 crypto answer
  map SDM_CMAP_1 65535-isakmp dynamic SDM_DYNMAP_1 ipsec crypto
  !
  Crypto ctcp port 10000
  Archives
  The config log
  hidekeys
  !
  !
  !
  Bridge IRB
  !
  !
  interface Loopback0
  10.128.201.1 the IP 255.255.255.255
  map SDM_CMAP_1 crypto
  !
  interface FastEthernet0
  switchport access vlan 10
  !
  interface FastEthernet1
  switchport access vlan 20
  !
  interface FastEthernet2
  switchport access vlan 10
  !
  interface FastEthernet3
  switchport access vlan 30
  !
  interface FastEthernet4
  no ip address
  Speed 100
  full-duplex
  PPPoE enable global group
  PPPoE-client dial-pool-number 1
  No cdp enable
  !
  interface Dot11Radio0
  no ip address
  Shutdown
  No dot11 extensions aironet
  !
  interface Vlan1
  address IP AAA. BBB. CCC.177 255.255.255.240
  no ip redirection
  no ip proxy-arp
  NAT outside IP
  no ip virtual-reassembly
  No autostate
  Hold-queue 100 on
  !
  interface Vlan10
  SERVER description
  no ip address
  IP nat inside
  no ip virtual-reassembly
  No autostate
  Bridge-group 10
  Bridge-group of 10 disabled spanning
  !
  interface Vlan20
  Description of the STAFF
  no ip address
  IP nat inside
  no ip virtual-reassembly
  No autostate
  Bridge-group 20
  Bridge-group 20 covering people with reduced mobility
  !
  Vlan30 interface
  Description COMMENTS
  no ip address
  IP nat inside
  no ip virtual-reassembly
  No autostate
  Bridge-group 30
  Bridge-group 30 covering people with reduced mobility
  !
  interface Dialer1
  MTU 1492
  IP unnumbered Vlan1
  no ip redirection
  no ip proxy-arp
  NAT outside IP
  inspect the MYFW over IP
  IP virtual-reassembly
  encapsulation ppp
  Dialer pool 1
  Dialer-Group 1
  PPP authentication pap callin
  PPP pap sent-name of user password 7 xxxx xxxxx
  !
  interface BVI10
  Description the server network bridge
  IP 10.128.7.254 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  !
  interface BVI20
  Description personal network bridge
  IP 10.128.150.254 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  !
  interface BVI30
  Bridge network invited description
  IP 10.128.1.254 255.255.255.0
  IP access-group Guest-ACL in
  IP nat inside
  IP virtual-reassembly
  !
  pool of local SDM_POOL_1 192.168.2.1 IP 192.168.2.100
  IP forward-Protocol ND
  IP route 0.0.0.0 0.0.0.0 Dialer1
  IP http server
  access-class 2 IP http
  local IP http authentication
  IP http secure server
  IP http secure ciphersuite 3des-ede-cbc-sha
  IP http secure-client-auth
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  !
  overload of IP nat inside source list 101 interface Vlan1
  IP nat inside source static tcp 10.128.7.1 25 AAA. BBB. Expandable 25 CCC.178
  IP nat inside source static tcp 10.128.7.1 80 AAA. BBB. CCC.178 extensible 80
  IP nat inside source static tcp 10.128.7.1 443 AAA. BBB. CCC.178 extensible 443
  IP nat inside source static tcp 10.128.7.1 8333 AAA. BBB. CCC.178 extensible 8333
  IP nat inside source static tcp 10.128.7.2 25 AAA. BBB. Expandable 25 CCC.179
  IP nat inside source static tcp 10.128.7.2 80 AAA. BBB. CCC.179 extensible 80
  IP nat inside source static tcp 10.128.7.2 443 AAA. BBB. CCC.179 extensible 443
  IP nat inside source static tcp 10.128.7.2 8333 AAA. BBB. CCC.179 extensible 8333
  IP nat inside source static tcp 10.128.7.3 25 AAA. BBB. Expandable 25 CCC.180
  IP nat inside source static tcp 10.128.7.3 80 AAA. BBB. CCC.180 extensible 80
  IP nat inside source static tcp 10.128.7.3 443 AAA. BBB. CCC.180 extensible 443
  IP nat inside source static tcp 10.128.7.3 8333 AAA. BBB. CCC.180 extensible 8333
  IP nat inside source static tcp 10.128.7.4 25 AAA. BBB. Expandable 25 CCC.181
  IP nat inside source static tcp 10.128.7.4 80 AAA. BBB. CCC.181 extensible 80
  IP nat inside source static tcp 10.128.7.4 443 AAA. BBB. CCC.181 extensible 443
  IP nat inside source static tcp 10.128.7.4 8333 AAA. BBB. CCC.181 extensible 8333
  IP nat inside source static tcp 10.128.7.5 25 AAA. BBB. Expandable 25 CCC.182
  IP nat inside source static tcp 10.128.7.5 80 AAA. BBB. CCC.182 extensible 80
  IP nat inside source static tcp 10.128.7.5 443 AAA. BBB. CCC.182 extensible 443
  IP nat inside source static tcp 10.128.7.5 8333 AAA. BBB. CCC.182 extensible 8333
  IP nat inside source static tcp 10.128.7.6 25 AAA. BBB. Expandable 25 CCC.183
  IP nat inside source static tcp 10.128.7.6 80 AAA. BBB. CCC.183 extensible 80
  IP nat inside source static tcp 10.128.7.6 443 AAA. BBB. CCC.183 extensible 443
  IP nat inside source static tcp 10.128.7.6 8333 AAA. BBB. CCC.183 extensible 8333
  IP nat inside source static tcp 10.128.7.7 25 AAA. BBB. Expandable 25 CCC.184
  IP nat inside source static tcp 10.128.7.7 80 AAA. BBB. CCC.184 extensible 80
  IP nat inside source static tcp 10.128.7.7 443 AAA. BBB. CCC.184 extensible 443
  IP nat inside source static tcp 10.128.7.7 8333 AAA. BBB. CCC.184 extensible 8333
  IP nat inside source static tcp 10.128.7.8 25 AAA. BBB. Expandable 25 CCC.185
  IP nat inside source static tcp 10.128.7.8 80 AAA. BBB. CCC.185 extensible 80
  IP nat inside source static tcp 10.128.7.8 443 AAA. BBB. CCC.185 extensible 443
  IP nat inside source static tcp 10.128.7.8 8333 AAA. BBB. CCC.185 extensible 8333
  IP nat inside source static tcp 10.128.7.9 25 AAA. BBB. Expandable 25 CCC.186
  IP nat inside source static tcp 10.128.7.9 80 AAA. BBB. CCC.186 extensible 80
  IP nat inside source static tcp 10.128.7.9 443 AAA. BBB. CCC.186 extensible 443
  IP nat inside source static tcp 10.128.7.9 8333 AAA. BBB. CCC.186 extensible 8333
  IP nat inside source static tcp 10.128.7.10 25 AAA. BBB. Expandable 25 CCC.187
  IP nat inside source static tcp 10.128.7.10 80 AAA. BBB. CCC.187 extensible 80
  IP nat inside source static tcp 10.128.7.10 443 AAA. BBB. CCC.187 extensible 443
  IP nat inside source static tcp 10.128.7.10 8333 AAA. BBB. CCC.187 extensible 8333
  IP nat inside source static tcp 10.128.7.11 25 AAA. BBB. Expandable 25 CCC.188
  IP nat inside source static tcp 10.128.7.11 80 AAA. BBB. CCC.188 extensible 80
  IP nat inside source static tcp 10.128.7.11 443 AAA. BBB. CCC.188 extensible 443
  IP nat inside source static tcp 10.128.7.11 8333 AAA. BBB. CCC.188 extensible 8333
  IP nat inside source static tcp 10.128.7.12 25 AAA. BBB. Expandable 25 CCC.189
  IP nat inside source static tcp 10.128.7.12 80 AAA. BBB. CCC.189 extensible 80
  IP nat inside source static tcp 10.128.7.12 443 AAA. BBB. CCC.189 extensible 443
  IP nat inside source static tcp 10.128.7.12 8333 AAA. BBB. CCC.189 extensible 8333
  !
  Guest-ACL extended IP access list
  deny ip any 10.128.7.0 0.0.0.255
  deny ip any 10.128.150.0 0.0.0.255
  allow an ip
  IP Internet traffic inbound-ACL extended access list
  allow udp any eq bootps any eq bootpc
  permit any any icmp echo
  permit any any icmp echo response
  permit icmp any any traceroute
  allow a gre
  allow an esp
  !
  access-list 1 permit 10.128.7.0 0.0.0.255
  access-list 1 permit 10.128.150.0 0.0.0.255
  access-list 1 permit 10.128.1.0 0.0.0.255
  access-list 2 allow 10.0.0.0 0.255.255.255
  access-list 2 refuse any
  access-list 101 permit ip 10.128.7.0 0.0.0.255 any
  access-list 101 permit ip 10.128.150.0 0.0.0.255 any
  access-list 101 permit ip 10.128.1.0 0.0.0.255 any
  Dialer-list 1 ip Protocol 1
  !
  !
  !
  !
  format of server RADIUS attribute 32 include-in-access-req hour
  RADIUS-server host 10.128.7.5 auth-port 1645 acct-port 1646 borders 7 xxxxx
  RADIUS vsa server send accounting
  !
  control plan
  !
  IP route 10 bridge
  IP road bridge 20
  IP road bridge 30
  Banner motd ^.
  Unauthorized access prohibited. *
  All access attempts are logged! ***************

  ^
  !
  Line con 0
  password 7 xxxx
  no activation of the modem
  line to 0
  line vty 0 4
  access-class 2
  privilege level 15
  transport input telnet ssh
  !
  max-task-time 5000 Planner
  AAA.BBB.CCC.ddd NTP server
  end

  Erik,

  The address pool you are talking about is to assign to the customer or the public router interface?  If you want to set up your vpn client software point a full domain name instead of an IP address that you can do it too long you can ensure the use of the name is resolved by a DNS SERVER.

  The range of addresses that you can be asigned to your Dialer interface will depend on your ISP.

  -Butterfly

• UC500 and IPsec VPN client - disconnects

  Just throw a question out there.
  I have a UC560 running uc500-advipservicesk9 - mz.151 - 2.T2 site HQ.  Remote users, about 8 of them, attempt to connect via IPsec VPN (v5.0.07.0440) HQ clients to access files, etc..  The behavior I see is 5 users to connect successfully, but only 5.  As soon as more users trying to connect, they have either:

  1. connect with success for a minutes, then unmold
  2. get a 412, remote peer is not responding
  3. connect, but someone of another session kickoff.

  Users use the same VPN profile, but with names of single user and passwords.

  Here are some of the CPU configs for VPN clients
  Configuration group customer crypto isakmp USER01
  key *.
  DNS 192.168.0.110
  pool USER01_POOL
  ACL USER01_ACL

  local RAUTHEN AAA authentication login
  permission of AAA local RAUTHOR network authenticated by FIS

  Crypto isakmp USER01_PROF profile
  match of group identity USER01
  list of authentication of client RAUTHEN
  RAUTHOR of ISAKMP authorization list.
  client configuration address respond

  crypto ISAKMP policy 1
  BA 3des
  md5 hash
  preshared authentication
  Group 2
  crypto ISAKMP policy 10
  BA aes
  preshared authentication
  Group 2
  lifetime 28800
  crypto ISAKMP policy 100
  BA aes
  preshared authentication
  Group 2
  life 3600
  crypto ISAKMP policy 1000
  BA 3des
  preshared authentication
  Group 2

  I enabled debugging
  Debug crypto ISAKMP
  Debug crypto ipsec

  Here are some of the things that I see on him debugs
  604899: 16:41:13.333 Aug 21: ISAKMP: (2073): HASH payload processing. Message ID = 284724149
  604900: 16:41:13.333 Aug 21: ISAKMP: (2073): treatment protocol NOTIFY DPD/R_U_THERE 1
  0, message ID SPI = 284724149, a = 0x8E7C6E68
  604901: 16:41:13.333 Aug 21: ISAKMP: (2073): error suppression node 284724149 FALSE reason 'informational (en) State 1.
  604902: 16:41:13.333 Aug 21: ISAKMP: (2073): entry = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
  604903: 16:41:13.333 Aug 21: ISAKMP: (2073): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

  581504: 16:59:12.805 Aug 20: ISAKMP: (2147): purge the node-1455244451
  581505: 16:59:12.805 Aug 20: ISAKMP: (2147): purge the node 840814618
  581506: 16:59:13.933 Aug 20: ISAKMP (2147): received 201.195.231.162 packet dport 4500 sport 37897 Global (R) QM_IDLE
  581507: 16:59:13.933 Aug 20: ISAKMP: node set 801982813 to QM_IDLE
  581508: 20 August 16:59:13.933: ISAKMP: (2147): HASH payload processing. Message ID = 801982813
  581509: 16:59:13.933 Aug 20: ISAKMP: receives the payload type 18
  581510: 16:59:13.933 Aug 20: ISAKMP: (2147): treatment remove with load useful reason
  581511: 16:59:13.933 Aug 20: ISAKMP: (2147): remove the doi = 0
  581512: 16:59:13.933 Aug 20: ISAKMP: (2147): remove Protocol id = 1
  581513: 16:59:13.933 Aug 20: ISAKMP: (2147): remove spi_size = 16
  581514: 16:59:13.933 Aug 20: ISAKMP: (2147): remove the spis num = 1
  581515: 16:59:13.933 Aug 20: ISAKMP: (2147): delete_reason = 2
  581516: 20 August 16:59:13.933: ISAKMP: (2147): load DELETE_WITH_REASON, processing of message ID = 801982813, reason: DELETE_BY_USER_COMMAND
  581517: 16:59:13.933 Aug 20: ISAKMP: (2147): peer does not paranoid KeepAlive.

  581518: 16:59:13.933 Aug 20: ISAKMP: (2147): peer does not paranoid KeepAlive.

  581519: 16:59:13.933 Aug 20: ISAKMP: (2147): removal of State of SA reason 'Order BY user' (R) QM_IDLE (post 201.195.231.162)
  581520: 16:59:13.933 Aug 20: ISAKMP: (2147): error suppression node 801982813 FALSE reason 'informational (en) State 1.
  581521: 16:59:13.933 Aug 20: ISAKMP: node set-878597687 to QM_IDLE
  581522: 20 August 16:59:13.937: ISAKMP: (2147): lot of 201.195.231.162 sending peer_port my_port 4500 37897 (R) QM_IDLE
  581523: 16:59:13.937 Aug 20: ISAKMP: (2147): sending a packet IPv4 IKE.
  581524: 16:59:13.937 Aug 20: ISAKMP: (2147): purge the node-878597687
  581525: 16:59:13.937 Aug 20: ISAKMP: (2147): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
  581526: 16:59:13.937 Aug 20: ISAKMP: (2147): former State = new State IKE_P1_COMPLETE = IKE_DEST_SA

  I opened a case with TAC on this and they do not understand what is the cause.  For them, it looks like a bug without papers.  And their recommendation is to reboot, upgrade or try configuring L2TP for remote users.

  Thank you

  JP

  JP,

  An update of IOS is worth it, even if him debugs seems to indicate that there is a problem with the client. If possible, I always suggest test with another client to see if it is unique to the Cisco VPN Client on Win7. Regarding the limit of 20 tunnel, it is very probably the number of IPsec security associations. If you issue a 'show crypto eli', this example displays the number of Sessions that are currently active IPSec.

  HTH,

  Frank

• Cisco VPN client stats - bypassed packages

  I have a profile that does not allow for split tunneling for the VPN client. Yet, when a client connects, the connection statistics indicate that some traffic is listed as 'bypassed '.

  Did someone knows what this traffic would be, and it is indeed without going through the tunnel and go to the directly connected LAN?

  Thanks in advance.

  Hello,.

  Here's an explantion:

  Bypassed packages - the total number of packets of data that the Client VPN do not apply because they must not be encrypted. Local ARPs and DHCP are in this category.

  If you happen to have a screenshot of packages more closely examine these packages?

  I hope this helps! If Yes, please rate.

  Thank you

• AnyConnect vpn client gives error of certificate on ios cisco 2800 series

  Dear all,

  I set up a vpn on cisco router ios simple anyconnect 2811

  I also configured natting on the inorder of router to access the internet for local users

  My problem

  I can not connect same vpn if I use the method of the anyconnect vpn client

  Also please tell me how to access internal resources by configuring split tunneling

  the error I get is as below

  
  

  * 08:16:35.947 Feb 8: 252:error:14094416:SSL routines: SSL3_READ_BYTES:sslv3 certificate alert unknown:../../../../cisco.comp/pki_ssl/src/openssl/dist/ssl/s3_pkt
  .c:1062:SSL alert number 46

  Here is my configuration

  ABC host name
  !

  start the flash system: c2800nm-advsecurityk9 - mz.124 - 24.T1.bin

  !
  AAA new-model
  !
  !
  AAA authentication login default local
  local connection SSL-VPN-AUTH authentication AAA
  !
  !
  AAA - the id of the joint session
  !
  dot11 syslog
  IP source-route
  !
  !
  IP cef
  !
  !
  IP-server names 4.2.2.2
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  Crypto pki trustpoint ABC
  enrollment selfsigned
  crl revocation checking
  rsakeypair ABC 1024
  !
  !
  ABC crypto pki certificate chain
  self-signed certificate 04
  3082023 HAS 308201 3 A0030201 02020104 300 D 0609 2A 864886 F70D0101 04050030
  27312530 2306092A 864886F7 0D 010902 73 732 6569 6173742D 6B 686177 16166D
  616E6565 6A2D7261 31313032 30383038 32333036 5A170D32 30303130 301E170D
  3030305A 31303030 30273125 30230609 2 A 864886 F70D0109 0216166D 65 73732
  2D6B6861 69617374 77616E65 656A2D72 6130819F 300 D 0609 2A 864886 F70D0101
  01050003 818 0030 81890281 8100C16D 1007E434 AFAEE3C1 90141205 E7785754
  FA3C4589 3D6B3D47 57BC54A5 7237E7FE 9B7CA69C 999B4DAF 835B98E9 972CFD03
  5A43488C 05E82E10 9B540AB9 5A54AB0C 525FED0E 05B6F2FF 6703F0BD F28AE6F2
  9E98298D E184CCDC 2D54741D 589 9731 C2BA5191 59DC7DC8 1F03C116 DDCF21EB D
  0BB4E931 02F61F64 D64A6F36 92F70203 010001A 3 76307430 0F060355 1 130101
  FF040530 030101FF 30210603 551D 1104 1A 301882 7373 656961 2 73742D6B 166D
  68617761 2 726130 1 230418 30168014 2FA1E05E 1BD981A0 1F060355 6E65656A
  A3485444 0B151D9E 44A3F6F6 301D 0603 551D0E04 1604142F A1E05E1B D981A0A3
  4854440B 151D9E44 A3F6F630 0D06092A 864886F7 010104 05000381 810096EF 0D
  39D4EEED E3CA162B E6BC1B61 0C3C66ED 02884209 0F4B54F1 BA7BEFF4 CAA206CE
  44 C 99817 134363 2 F29A9E6A 945AA1B4 E4B85ED7 1800DAA1 30BE25C3 8340AE80
  714F8FBD 9A433C4B 3EE2204D 88F7AB6D 929B5C88 5E7BC2B9 25754390 1622DB7B
  EEB11694 F381E995 59C825BE 52EA5923 F87C43A3 98744BE8 BB27C381 BE14
  quit smoking
  !
  !
  privilege of username XXXX XXXX 15
  username password ABC ABC
  Archives
  The config log
  hidekeys
  !
  !
  !
  !
  !
  !
  !
  !
  interface FastEthernet0/0
  IP address | public IP address. 255.255.255.252
  NAT outside IP
  IP virtual-reassembly
  automatic duplex
  automatic speed
  !
  interface FastEthernet0/1
  IP 192.168.0.7 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  automatic duplex
  automatic speed
  !
  interface FastEthernet0/2/0
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  local pool IP 10.10.10.1 intranet 10.10.10.254
  IP forward-Protocol ND
  IP route 0.0.0.0 0.0.0.0 GATEWAY
  no ip address of the http server
  IP http secure server
  !
  !
  IP nat inside source map route sheep interface FastEthernet0/0 overload
  !
  extended IP access allow-traffic-to-lan list
  deny ip 192.168.0.0 0.0.0.255 10.10.10.0 0.0.0.255
  Licensing ip 192.168.0.0 0.0.0.255 any
  !
  access-list 101 permit ip 192.168.0.0 0.0.0.255 10.10.10.0 0.0.0.255
  !
  !
  !
  sheep allowed 10 route map
  match ip address allow-traffic-to-lan
  !
  !
  !
  WebVPN EIAST gateway
  IP address | public-ip | port 443
  redirect http port 80
  SSL trustpoint ABC
  development
  !
  WebVPN install svc flash:/webvpn/anyconnect-win-2.5.2018-k9.pkg sequence 1
  !
  WebVPN context XYZ
  SSL authentication check all
  !
  !
  political group XYZ
  functions compatible svc
  SVC-pool of addresses "intranet".
  SVC split include 10.10.10.0 255.255.255.0
  SVC-Server primary dns 213.42.20.20
  Group Policy - by default-XYZ
  list of authentication SSL-VPN-AUTH of AAA.
  area of bridge XYZ XYZ
  10 Max-users
  development
  !
  end

  Thank you

  Jvalin

  You could hit the next bug

  CSCtb73337    AnyConnect does not work with IOS if cert not trust/name of offset
  which is set at 12.4 (24) T02.

  Please update the code and give it a try.