Cisco VPN client stats - bypassed packages
I have a profile that does not allow for split tunneling for the VPN client. Yet, when a client connects, the connection statistics indicate that some traffic is listed as 'bypassed '.
Did someone knows what this traffic would be, and it is indeed without going through the tunnel and go to the directly connected LAN?
Thanks in advance.
Hello,.
Here's an explantion:
Bypassed packages - the total number of packets of data that the Client VPN do not apply because they must not be encrypted. Local ARPs and DHCP are in this category.
If you happen to have a screenshot of packages more closely examine these packages?
I hope this helps! If Yes, please rate.
Thank you
Tags: Cisco Security
Similar Questions
-
Cisco vpn client minimized in the taskbar and the rest in status: disconnect
I used 5.0.07.0240 cisco vpn client for 1 month with my pc under windows 7-64 bit. Worked well for 1 month. All of a sudden now when I double click the icon to start, VPN automatically minimizes to the taskbar with the disconnected state. It does not connect the option to hit or anything before it reduced to a minimum. I've not seen this before and no changes... but now it simply doesn't work. All solutions? Windows just patch automatically breaking cisco?
Unfortunately, cisco does not world class technical service... they called but no use.In my view, there is now a published version of the x 64 client, you need to download.If you suspect an update of Windows, why not try a system restore for a day, it wasworking correctly?On Wednesday, April 28, 2010 17:27:46 + 0000, akshay2112 wrote:> I used 5.0.07.0240 cisco vpn client for 1 month with my pc under windows 7-64 bit. Worked well for 1 month. All of a sudden now when I double click the icon to start, VPN automatically minimizes to the taskbar with the disconnected state. It does not connect the option to hit or anything before it reduced to a minimum. I've not seen this before and no changes... but now it simply doesn't work. All solutions? Windows just patch automatically breaking cisco? Unfortunately, cisco does not world class technical service... they called but no use.Barb Bowman www.digitalmediaphile.com
-
connect Cisco VPN client v5 to asa 5505
I have remote vpn configuration issues between ASA5505 and Cisco VPN client v5. Successfully, I can establish a connection between the client Vpn and ASA and receive the IP address of the ASA. Statistical customer VPN windows shows that packets are sent and encrypted but none of the packages is received/decrypted.
Cannot ping asa 5505
Any ideas on what I missed?
Try adding...
ISAKMP nat-traversal crypto
In addition, you cannot ping the inside interface of the ASA vpn without this command...
management-access inside
Please evaluate the useful messages.
-
Cisco VPN Client 5.0.0 does not connect
Hello
I am trying to establish the VPN session the firewall to 5525 X Cisco ASA crossing 9.1.1 Cisco VPN Client. Although AnyConnect is the way to go, the inherited method must always be supported for some time as part of a migration. I tried two VPN users (authenticated by ad) on two client computers running Windows 7 64 bit and Cisco VPN Client 5.0.07.0440. Both users are able to establish a session to a computer at the ASA, but not the other. Entering credentails evil, the login popup will appear immediately. On the combination of username/password correct name, the following VPN client log messages are generated and the session drops that is "not connected" in the status bar. The PCF file is the same on both client computers.
Cisco Systems VPN Client Version 5.0.07.0440
Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 6.1.7601 Service Pack 1
119 22:49:16.933 06/23/13 Sev=Info/6 IKE/0x6300003B
Attempting to establish a connection with 203.99.111.44.
120 22:49:16.939 06/23/13 Sev=Info/4 IKE/0x63000001
Starting IKE Phase 1 Negotiation
121 22:49:16.942 06/23/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Nat-T), VID(Unity)) to 203.99.111.44
122 22:49:16.973 06/23/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 203.99.111.44
123 22:49:16.973 06/23/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK AG (SA, KE, NON, ID, HASH, VID(Unity), VID(Xauth), VID(dpd), VID(Nat-T), NAT-D, NAT-D, VID(Frag), VID(?)) from 203.99.111.44
124 22:49:16.974 06/23/13 Sev=Info/5 IKE/0x63000001
Peer is a Cisco-Unity compliant peer
125 22:49:16.974 06/23/13 Sev=Info/5 IKE/0x63000001
Peer supports XAUTH
126 22:49:16.974 06/23/13 Sev=Info/5 IKE/0x63000001
Peer supports DPD
127 22:49:16.974 06/23/13 Sev=Info/5 IKE/0x63000001
Peer supports NAT-T
128 22:49:16.974 06/23/13 Sev=Info/5 IKE/0x63000001
Peer supports IKE fragmentation payloads
129 22:49:16.977 06/23/13 Sev=Info/6 IKE/0x63000001
IOS Vendor ID Contruction successful
130 22:49:16.977 06/23/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG *(HASH, NOTIFY:STATUS_INITIAL_CONTACT, NAT-D, NAT-D, VID(?), VID(Unity)) to 203.99.111.44
131 22:49:16.977 06/23/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
132 22:49:16.977 06/23/13 Sev=Info/4 IKE/0x63000083
IKE Port in use - Local Port = 0xCA7C, Remote Port = 0x1194
133 22:49:16.977 06/23/13 Sev=Info/5 IKE/0x63000072
Automatic NAT Detection Status:
Remote end is NOT behind a NAT device
This end IS behind a NAT device
134 22:49:17.000 06/23/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 203.99.111.44
135 22:49:17.000 06/23/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 203.99.111.44
136 22:49:17.211 06/23/13 Sev=Info/4 IPSEC/0x63700008
IPSec driver successfully started
137 22:49:17.211 06/23/13 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
138 22:49:23.207 06/23/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 203.99.111.44
139 22:49:23.393 06/23/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 203.99.111.44
140 22:49:23.393 06/23/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 203.99.111.44
141 22:49:23.393 06/23/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 203.99.111.44
142 22:49:23.401 06/23/13 Sev=Info/5 IKE/0x6300005E
Client sending a firewall request to concentrator
143 22:49:23.401 06/23/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 203.99.111.44
144 22:49:23.427 06/23/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 203.99.111.44
145 22:49:23.427 06/23/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 203.99.111.44
146 22:49:23.427 06/23/13 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS: , value = 10.2.193.69
147 22:49:23.427 06/23/13 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS(1): , value = 10.2.5.2
148 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS(2): , value = 10.1.5.2
149 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD: , value = 0x00000000
150 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SPLIT_INCLUDE (# of split_nets), value = 0x00000001
151 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x6300000F
SPLIT_NET #1
subnet = 10.0.0.0
mask = 255.0.0.0
protocol = 0
src port = 0
dest port=0
152 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN: , value = example.org
153 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS: , value = 0x00000000
154 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc ASA5525 Version 9.1(1) built by builders on Wed 28-Nov-12 11:15 PST
155 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT: , value = 0x00000001
156 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = Received and using NAT-T port number , value = 0x00001194
157 22:49:23.445 06/23/13 Sev=Info/4 IKE/0x63000056
Received a key request from Driver: Local IP = 10.2.193.69, GW IP = 203.99.111.44, Remote IP = 0.0.0.0
158 22:49:23.445 06/23/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH, SA, NON, ID, ID) to 203.99.111.44
159 22:49:23.477 06/23/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 203.99.111.44
160 22:49:23.477 06/23/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:STATUS_RESP_LIFETIME) from 203.99.111.44
161 22:49:23.477 06/23/13 Sev=Info/5 IKE/0x63000045
RESPONDER-LIFETIME notify has value of 86400 seconds
162 22:49:23.477 06/23/13 Sev=Info/5 IKE/0x63000047
This SA has already been alive for 7 seconds, setting expiry to 86393 seconds from now
163 22:49:23.477 06/23/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 203.99.111.44
164 22:49:23.477 06/23/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:NO_PROPOSAL_CHOSEN) from 203.99.111.44
165 22:49:23.478 06/23/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK INFO *(HASH, DEL) to 203.99.111.44
166 22:49:23.478 06/23/13 Sev=Info/4 IKE/0x63000049
Discarding IPsec SA negotiation, MsgID=F3E3C530
167 22:49:23.478 06/23/13 Sev=Info/4 IKE/0x63000017
Marking IKE SA for deletion (I_Cookie=CD65262E1C3808E4 R_Cookie=912AE160ADADEE65) reason = DEL_REASON_IKE_NEG_FAILED
168 22:49:23.478 06/23/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 203.99.111.44
169 22:49:23.479 06/23/13 Sev=Info/4 IKE/0x63000058
Received an ISAKMP message for a non-active SA, I_Cookie=CD65262E1C3808E4 R_Cookie=912AE160ADADEE65
170 22:49:23.479 06/23/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(Dropped) from 203.99.111.44
171 22:49:24.310 06/23/13 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
172 22:49:26.838 06/23/13 Sev=Info/4 IKE/0x6300004B
Discarding IKE SA negotiation (I_Cookie=CD65262E1C3808E4 R_Cookie=912AE160ADADEE65) reason = DEL_REASON_IKE_NEG_FAILED
173 22:49:26.849 06/23/13 Sev=Info/4 IKE/0x63000001
IKE received signal to terminate VPN connection
174 22:49:26.855 06/23/13 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
175 22:49:26.855 06/23/13 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
176 22:49:26.855 06/23/13 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
177 22:49:26.855 06/23/13 Sev=Info/4 IPSEC/0x6370000A
IPSec driver successfully stopped
Any ideas why the second client of Windows 7 does not work?
Kind regards
Rick.
Rick
Thanks for the additional output. It shows the xauth authentication step, which is good to see. But it does not offer much clarity on what is causing the problem.
My attention is drawn to a couple of message on the balls that are in line with the two sessions for which you posted newspapers.
32 00:36:08.178 24/06/13 Sev = Info/5 IKE/0x6300005E
Customer address a request from firewall to hub
I'm not sure that we see any answer to this, but it makes me wonder if it is somehow involved in the issue. Is it possible that there is a difference in the configuration of firewall and operating between two clients?
I am also interested in this series of posts
48 00:36:08.210 24/06/13 Sev = Info/4 IKE / 0 x 63000056
Received a request from key driver: local IP = 10.2.193.69, GW IP = 203.99.111.44, Remote IP = 0.0.0.0
I don't know why the pilot requested a key at this point, and I wonder why the remote IP is 0.0.0.0?
It is followed by a package in which the ASA provides the value of the life of SA - which seems to be on the path to a successful connection. that is followed by
55 00:36:08.350 24/06/13 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 203.99.111.44
56 00:36:08.350 24/06/13 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">
during which the SAA indicates that no proposal has been selected. It seems therefore that the ASA is not happy about something.
If we do not find indications of the client that allows to identify the problem, then maybe we look at the ASA. Are all log messages generated on the SAA during this attempt to establish VPN that could show us the problem? Would it not be possible to run debugs on the SAA in a trial of this machine?
HTH
Rick
-
[SOLVED] Native Iphone4s Cisco VPN client cannot establish the tunnel (victory clients do)
Hello
IPhone 4 s last IOS5 V 5.1.1 installed
I'm not able to make the native IPSEC VPN connection upset my company Cisco 877
Instead, all my computer laptop and netbook with Cisco VPN Client work installed fine when they connect remotely to society 877
Turn debugging 877, it seems Iphone successfully passes the 1 connection ike (actually Iphone wonder phase2 user/pass), but it hung to phase2 give me the error 'Negotiation with the VPN server has no' back
An idea or a known issue on this?
This is how I configured my VPN 877 part:
R1 (config) # aaa new-model
R1 (config) # aaa authentication default local connection
R1 (config) # aaa authentication login vpn_xauth_ml_1 local
R1 (config) # aaa authentication login local sslvpn
R1 (config) # aaa authorization network vpn_group_ml_1 local
R1 (config) # aaa - the id of the joint session
Crypto isakmp policy of R1 (config) # 1
R1(config-ISAKMP) # BA 3des
# Preshared authentication R1(config-ISAKMP)
Group R1(config-ISAKMP) # 2
R1(config-ISAKMP) #.
R1(config-ISAKMP) #crypto isakmp policy 2
R1(config-ISAKMP) # BA 3des
Md5 hash of R1(config-ISAKMP) #.
# Preshared authentication R1(config-ISAKMP)
Group R1(config-ISAKMP) # 2
Output R1(config-ISAKMP) #.
R1 (config) # CUSTOMER - VPN crypto isakmp client configuration group
R1(config-ISAKMP-Group) # key xxxxxxxx
R1(config-ISAKMP-Group) # 192.168.0.1 dns
R1(config-ISAKMP-Group) # VPN - pool
ACL R1(config-ISAKMP-Group) # 120
R1(config-ISAKMP-Group) max-users # 5
Output R1(config-ISAKMP-Group) #.
R1 (config) # ip local pool VPN-pool 192.168.0.20 192.168.0.25
R1 (config) # crypto ipsec transform-set encrypt-method-1 esp-3des esp-sha-hmac
R1 (config) # crypto ipsec VPN-profile-1 profile
R1(IPSec-Profile) # set the transform-set encrypt method 1
Tunnel type interface virtual-Template2 R1 (config) #.
R1(Config-if) # ip unnumbered FastEthernet0/0
R1(Config-if) # tunnel mode ipsec ipv4
Ipsec protection tunnel R1(Config-if) # VPN - profile - 1 profile
Profile of R1 (config) # isakmp crypto vpn-ike-profile-1
R1(conf-ISA-Prof) # match group identity CUSTOMER VPN
R1(conf-ISA-Prof) # vpn_xauth_ml_1 list client authentication
R1(conf-ISA-Prof) # isakmp authorization list vpn_group_ml_1
R1(conf-ISA-Prof) # client configuration address respond
R1(conf-ISA-Prof) virtual-model # 2
Then run AccessList 120 for desired traffic ("access-list 120 now allows ip any any")
I have configured my VPN Cisco "CUSTOMER-VPN" clients and relative password
Whenever they connect, they are prompted for the password and username phase2 then they join the VPN with an IP address from local subnet released.
With the same parameters required and confirmed in section ipsec VPN Iphone it does not work.
It's 877 isakmp debug output after that Iphone wonder name of user and password (then I suppose that phase 1 completed):
* 14:29:30.731 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport CONF_XAUTH
* 14:29:30.735 May 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID =-1427983983
* 14:29:30.735 May 19: ISAKMP: Config payload RESPONSE
* 14:29:30.735 May 19: ISAKMP/xauth: response XAUTH_USER_NAME_V2 attribute
* 14:29:30.735 May 19: ISAKMP/xauth: response XAUTH_USER_PASSWORD_V2 attribute
* 14:29:30.735 May 19: ISAKMP: (2081): node-1427983983 error suppression FALSE reason "made with Exchange of request/response xauth.
* 14:29:30.735 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_REPLY
* 14:29:30.735 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_REQ_SENT = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT
* 14:29:30.743 May 19: ISAKMP: node set 1322685842 to CONF_XAUTH
* 19 May 14:29:30.747: ISAKMP: (2081): launch peer 151.38.197.143 config. ID = 1322685842
* 19 May 14:29:30.747: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) CONF_XAUTH
* 14:29:30.747 May 19: ISAKMP: (2081): sending a packet IPv4 IKE.
* 14:29:30.747 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_AAA, IKE_AAA_CONT_LOGIN
* 14:29:30.747 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_AAA_CONT_LOGIN_AWAIT = IKE_XAUTH_SET_SENT
* 14:29:31.299 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport CONF_XAUTH
* 14:29:31.299 May 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID = 1322685842
* 14:29:31.299 May 19: ISAKMP: Config payload ACK
* 19 May 14:29:31.303: ISAKMP: (2081): XAUTH ACK processed
* 14:29:31.303 May 19: ISAKMP: (2081): error suppression node 1322685842 FALSE basis "Mode of Transaction.
* 14:29:31.303 May 19: ISAKMP: (2081): talking to a customer of the unit
* 14:29:31.303 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_ACK
* 14:29:31.303 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_SET_SENT = IKE_P1_COMPLETE
* 14:29:31.303 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
* 14:29:31.303 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE
* 19 May 14:29:31.303: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
* 14:29:31.315 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
* 14:29:31.315 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE
* 14:29:31.623 may 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport QM_IDLE
* 14:29:31.623 may 19: ISAKMP: node set-851463821 to QM_IDLE
* 14:29:31.623 may 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID =-851463821
* 14:29:31.623 may 19: ISAKMP: Config payload REQUEST
* 14:29:31.623 may 19: ISAKMP: (2081): verification of claim:
* 14:29:31.623 may 19: ISAKMP: IP4_ADDRESS
* 14:29:31.623 may 19: ISAKMP: IP4_NETMASK
* 14:29:31.623 may 19: ISAKMP: IP4_DNS
* 14:29:31.623 may 19: ISAKMP: IP4_NBNS
* 14:29:31.623 may 19: ISAKMP: ADDRESS_EXPIRY
* 14:29:31.623 may 19: ISAKMP: APPLICATION_VERSION
* 14:29:31.623 may 19: ISAKMP: MODECFG_BANNER
* 14:29:31.623 may 19: ISAKMP: domaine_par_defaut
* 14:29:31.623 may 19: ISAKMP: SPLIT_DNS
* 14:29:31.623 may 19: ISAKMP: SPLIT_INCLUDE
* 14:29:31.623 may 19: ISAKMP: INCLUDE_LOCAL_LAN
* 14:29:31.623 may 19: ISAKMP: PFS
* 14:29:31.623 may 19: ISAKMP: MODECFG_SAVEPWD
* 14:29:31.623 may 19: ISAKMP: FW_RECORD
* 14:29:31.623 may 19: ISAKMP: serveur_sauvegarde
* 14:29:31.623 may 19: ISAKMP: MODECFG_BROWSER_PROXY
* 14:29:31.627 May 19: ISAKMP/author: author asks for CUSTOMER-VPNsuccessfully group AAA
* 14:29:31.627 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_REQUEST
* 14:29:31.627 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_CONFIG_AUTHOR_AAA_AWAIT
* 14:29:31.627 May 19: ISAKMP: (2081): attributes sent in the message:
* 19 May 14:29:31.627: address: 0.2.0.0
* 19 May 14:29:31.627: ISAKMP: (2081):address of 192.168.0.21 assignment
* 14:29:31.627 May 19: ISAKMP: sending private address: 192.168.0.21
* 14:29:31.627 May 19: ISAKMP: send the subnet mask: 255.255.255.0
* 14:29:31.631 May 19: ISAKMP: sending IP4_DNS server address: 192.168.0.1
* 14:29:31.631 May 19: ISAKMP: sending ADDRESS_EXPIRY seconds left to use the address: 3576
* 14:29:31.631 May 19: ISAKMP: string APPLICATION_VERSION sending: Cisco IOS software, software C870 (C870-ADVIPSERVICESK9-M), Version 12.4 (15) T7, VERSION of the SOFTWARE (fc3)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Updated Friday 14 August 08 07:43 by prod_rel_team
* 14:29:31.631 May 19: ISAKMP: split shipment include the name Protocol 120 network 0.0.0.0 mask 0.0.0.0 0 src port 0, port 0 DST
* 14:29:31.631 May 19: ISAKMP: sending save the password answer value 0
* 19 May 14:29:31.631: ISAKMP: (2081): respond to peer 151.38.197.143 config. ID =-851463821
* 19 May 14:29:31.631: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) CONF_ADDR
* 14:29:31.631 May 19: ISAKMP: (2081): sending a packet IPv4 IKE.
* 14:29:31.631 May 19: ISAKMP: (2081): node-851463821 error suppression FALSE reason "error no.".
* 14:29:31.631 May 19: ISAKMP: (2081): talking to a customer of the unit
* 14:29:31.631 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_AAA, IKE_AAA_GROUP_ATTR
* 14:29:31.631 May 19: ISAKMP: (2081): former State = new State IKE_CONFIG_AUTHOR_AAA_AWAIT = IKE_P1_COMPLETE
* 14:29:31.635 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
* 14:29:31.635 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE
Here the Iphone remains unused for a few seconds...
* 14:29:48.391 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport QM_IDLE
* 14:29:48.391 May 19: ISAKMP: node set 1834509506 to QM_IDLE
* 19 May 14:29:48.391: ISAKMP: (2081): HASH payload processing. Message ID = 1834509506
* 19 May 14:29:48.391: ISAKMP: (2081): treatment of payload to DELETE. Message ID = 1834509506
* 14:29:48.391 May 19: ISAKMP: (2081): peer does not paranoid KeepAlive.
* 14:29:48.395 May 19: ISAKMP: (2081): peer does not paranoid KeepAlive.
* 14:29:48.395 May 19: ISAKMP: (2081): removal of HIS right State 'No reason' (R) QM_IDLE (post 151.38.197.143)
* 14:29:48.395 May 19: ISAKMP: (2081): error suppression node 1834509506 FALSE reason 'informational (en) State 1.
* 19 May 14:29:48.395: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
* 19 May 14:29:48.395: IPSEC (key_engine_delete_sas): rec would notify of ISAKMP
* 19 May 14:29:48.395: IPSEC (key_engine_delete_sas): remove all SAs shared with peer 151.38.197.143
* 14:29:48.395 May 19: ISAKMP: node set-1711408233 to QM_IDLE
* 19 May 14:29:48.395: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) QM_IDLE
* 14:29:48.395 May 19: ISAKMP: (2081): sending a packet IPv4 IKE.
* 14:29:48.399 May 19: ISAKMP: (2081): purge the node-1711408233
* 14:29:48.399 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
* 14:29:48.399 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_DEST_SA
* 14:29:48.399 May 19: ISAKMP: (2081): removal of HIS right State 'No reason' (R) QM_IDLE (post 151.38.197.143)
* 14:29:48.399 May 19: ISAKMP: (0): cannot decrement IKE Call Admission Control incoming_active stat because he's already 0.
* 14:29:48.399 May 19: ISAKMP (0:2081): return address 192.168.0.21 to pool
* 14:29:48.399 May 19: ISAKMP: Unlocking counterpart struct 0 x 84084990 for isadb_mark_sa_deleted(), count 0
* 14:29:48.399 May 19: ISAKMP: return address 192.168.0.21 to pool
* 14:29:48.399 May 19: ISAKMP: delete peer node by peer_reap for 151.38.197.143: 84084990
* 14:29:48.399 May 19: ISAKMP: return address 192.168.0.21 to pool
* 14:29:48.403 May 19: ISAKMP: (2081): node-1427983983 error suppression FALSE reason 'IKE deleted.
* 14:29:48.403 May 19: ISAKMP: (2081): error suppression node 1322685842 FALSE reason 'IKE deleted.
* 14:29:48.403 May 19: ISAKMP: (2081): node-851463821 error suppression FALSE reason 'IKE deleted.
* 14:29:48.403 May 19: ISAKMP: (2081): error suppression node 1834509506 FALSE reason 'IKE deleted.
* 14:29:48.403 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
* 14:29:48.403 May 19: ISAKMP: (2081): former State = new State IKE_DEST_SA = IKE_DEST_SA
* 19 May 14:29:48.403: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
It seems 877 comes even to assign a local ip address of LAN for Iphone (192.168.0.21) but then something goes wrong...
Any idea or suggestion on this?
Thank you very much
Hi Federico,.
Please let us know.
Please mark this message as answered while others will be able to learn the lessons.
Thank you.
Portu.
-
Cisco VPN Client causes a blue screen crash on Windows XP Pro (Satellite M30)
Hello
I have a Satellite Pro M30 running Windows XP Professional.
After you start a vpn Tunnel via a customer of Cisco VPN (Version 4.6 and 4.7), the system crashes with a blue screen.
I see that the key exchange is successful, but immediately after the vpn connection is established Windows XP crashes with a blue screen.
Someone has any idea how to solve this problem?
Perhaps by the updated device driver? And if so, which driver should be updated?
Kind regards
Thorsten
Hello
Well, it seems that the Cisco client is a problem.
I m unaware of this product because it of not designed by Toshiba.
I think that the drivers are not compatible with the Windows operating system.
However, I found this site troubleshooting cisco vpn client:
Please check this:
http://www.CITES.uiuc.edu/wireless/trouble-index.html -
windows\system32\vsinit.dll
I try to run CISCO "VPN Client" connect from my PC at home for my work PC.
Then, I get a message:
Validation failed for C:\WINDOWS\System32\VSINIT.dll
Any ideas?
Martin
Hello
Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747
Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)
If the steps above is not enough of it please post your request in the TechNet forum for assistance: http://social.technet.microsoft.com/Forums/en/category/windowsxpitpro
-
Professional Windows Vista crashes when you use Cisco VPN Client 5.05.0290
I have a Dell Latitude E6400 Windows Vista Business (32 bit) operating system. When I go to turn on the VPN client, I get invited to my username / password and once entered, the system just hangs. The only way to answer, it's a re-start. I took action:
1 disabled UAC in Windows
2 tried an earlier version of the VPN client
3. by the representative of Cisco, I put the application runs as an administratorIf there are any suggestions or similar stories, I would be grateful any offereings.
It IS the COMODO Firewall with the 5.0.x CISCO VPN client that causes the gel. The last update of COMODO has caused some incompatibility. I tried to install COMODO without the built in Zonealerm, but it is still frozen. The only way to solve it is to uninstall COMODOD. Since then, my CISCO VPN client works again...
-
Using Cisco VPN Client in Windows 7 Professional 64 bit
Hi all!
I need to use Cisco VPN Client to connect to my server in the company, because my company uses lotus notes Server, I have to connect Cisco VPN to access e-mail. But now my windows version is Windows 7 Pro 64 bits that cannot directly install this application, I already installed XP Mode and creatde shortcut to Windows 7, I plugged the Cisco VPN to my Cisco VPN server, but I can not access the server, Pls help me and show me how to solve this problemOpen the XP VM itself, do not use the shortcut that was published in
the W7 boot menu. You need to install Outlook / your email client
Inside the virtual machine, as well as on the side of W7. You can point to the same
PST files if you have local PST files, but you just can't open them in
at the same time of W7 and XP VM.There is no way to bridge using the shortcut of publishing app
Some people have reported success with the third party IPSec
replacements as customer universal shrew or the NCP. Your IT Department.
would like to know if these are supported:
> Hello all! I need to use Cisco VPN Client to connect to my server in the company, because my company uses lotus notes Server, I have to connect Cisco VPN to access e-mail. But now my windows version is Windows 7 Pro 64 bits that cannot directly install this application, I already installed XP Mode and creatde shortcut to Windows 7, I plugged the Cisco VPN to my Cisco VPN server, but I can not access the server, Pls help me and show me how to solve this problem
Barb Bowman www.digitalmediaphile.com -
Cisco VPN Client and 64-Bit OS Support
I'm in the stages of planning/testing of migrating users to the Cisco VPN client. Problem that I came across well is that I can't find a version that supports 64-bit operating systems. I looked through the Download Center with no luck. I'm a little more looking for a version out there? Thanks in advance.
As much as I know there is no 64-bit support and is not yet on the roadmap of IPSEC VPN Client. For more details, see:
http://www.Cisco.com/en/us/docs/security/ASA/compatibility/ASA-VPN-compatibility.html
Concerning
Farrukh
-
Problems to connect via the Cisco VPN client IPSec of for RV180W small business router
Hello
I tried to configure my router Cisco of RV180W as a customer VPN IPSec, but have encountered a problem that I hope someone can help me with. "" I managed to do the work of configuration so that the Cisco's VPN IPSec client authenticates successfully with the XAUTH user, I put on the router, but during the negotiation, the client ends with the following, which appears several times on the router error message: ' Mar 20 Oct 19:41:53 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for
> [34360] has no config mode. I've read around the internet and a number of people seem to say that the Cisco VPN Client is not compatible with the router, but the same thing happens to my iPhone VPN client.
Is it possible that this can be implemented? Below, I have attached the full configuration files and the log files. Thank you much in advance.
Router log file (I changed the IP
addresses > respectively as well as references to MAC addresses) Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: floating ports NAT - T with counterpart
> [44074]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] WARNING: notification to ignore INITIAL-CONTACT> [44074] because it is admitted only after the phase 1.
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for> [4500]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for> [44074]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received unknown Vendor ID
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received Vendor ID: CISCO-UNITY
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT detected: is located behind a device. NAT and alsoPeer is behind a NAT device
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: request sending Xauth for> [44074]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association established for> [4500] - > [44074] with spi = >.
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REPLY' of> [44074]
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: login successful for the user "myusername".
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser connected from the IP>
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: sending of information Exchange: Notify payload [10381]
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REQUEST' of> [44074]
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: ignored attribute 5
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28683
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no mode config
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28684
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no mode config
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: remove the invalid payload with doi:0.
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: purged-Association of ISAKMP security with proto_id = ISAKMP and spi =>.
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser Logged Out of the IP>
Mar 20 Oct 20:03:16 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association deleted for> [4500] - > [44074] with spi = > The router configuration
IKE policy
VPN strategy
Client configuration
Hôte : < router="" ip=""> >
Authentication group name: remote.com
Password authentication of the Group: mysecretpassword
Transport: Enable Transparent Tunneling; IPSec over UDP (NAT/PAT)
Username: myusername
Password: mypassword
Please contact Cisco.
Correct, the RV180 is not compatible with the Cisco VPN Client. The Iphone uses the Cisco VPN Client.
You can use the PPTP on the RV180 server to connect a PPTP Client.
In addition, it RV180 will allow an IPsec connection to third-party customers 3. Greenbow and Shrew Soft are 2 commonly used clients.
-
SafeNet and Cisco VPN Client Compatible?
I have been using the Cisco VPN for quite awhile with no problems. Recently, we have added a Watchguard Firebox somewhere else and have installed the Client of Watchguard MUVPN, otherwise known as a customer of Safenet.
Since the installation, I could not yet properly use the Cisco Client. If I disable the two Services of Safenet, I invited to my user id and password and connect to the Cisco Concentrator and get an ip, etc. However, I can't ping anything on the network.
My solution is to completely uninstall both clients and reinstall the Cisco by itself. This is not very practical.
If anyone know a fix for this I'd appreciate comments.
Thank you
Patrick Dunnigan
Hi Patrick,
I only got lucky with the SafeNet customer brand Watchguard with the 4.0.x releases of the Cisco client. I think Cisco 4.6 clients use a newer driver from the DNE or else that plays well with SafeNet.
In any case, here's how to set up PC that requires both clients:
First, install the Cisco VPN client. Restart the application, and then stop and disable the Windows service.
Install the client for Watchguard, reboot as requested.
Then, stop and set to manual both SafeNet services, then start and set to automatic the Cisco service.
Delete the shortcut in your Start menu Startup group safecfg.exe (or the key of HKLM\MS\Windows\CurrentVer\Run, where he gets set.)
Delete the shortcut to start for the Cisco VPN client as well.
Whenever you want to use the Cisco customer, you can just launch the Dialer to IPSec. If you want to run the SafeNet client, stop the Cisco service, start the services of SafeNet, then run safecfg.exe. A few batch files facilitate this process for users.
Hope that helps,
Chris
-
AnyConnect + possible PSK (pre-shared key) as under with cisco vpn client ikev1 and ikev2
Is it possible to create a VPN Anyconnect of RA with just the name of user and password + pre-shared key (Group) for the connection, as could do for ikev1 with cisco VPN client? I am running 8.4.X ASA code and looks like tunnel-group commands have 8.2.X somewhat change. If you change the group type of the tunnel for remote access, now there is no option for IKEv2 PSK. This is only available when you choose the type
Type of TG_TEST FW1 (config) # tunnel - group?
set up the mode commands/options:
Site IPSec IPSec-l2l group
Remote access using IPSec-IPSec-ra (DEPRECATED) group
remote access remote access (IPSec and WebVPN) group
WebVPN WebVPN Group (DEPRECATED)FW1(config-tunnel-General) # tunnel - group TG_TEST ipsec-attributes
FW1(config-tunnel-IPSec) #?configuration of the tunnel-group commands:
any required authorization request users to allow successfully in order to
Connect (DEPRECATED)
Allow chain issuing of the certificate
output attribute tunnel-group IPSec configuration
mode
help help for group orders of tunnel configuration
IKEv1 configure IKEv1
ISAKMP policy configure ISAKMP
not to remove a pair of attribute value
by the peer-id-validate Validate identity of the peer using the peer
certificate
negotiation to Enable password update in RADIUS RADIUS with expiry
authentication (DEPRECATED)FW1(config-tunnel-IPSec) # ikev1?
the tunnel-group-ipsec mode commands/options:
pre-shared key associate a key shared in advance with the connection policyI'm getting old so I hope that it is not in another complaint curmudgeonly on the loss of functionality. :)
Many small businesses do not want to invest in the PKI. It is usually a pain to deploy, backup, make redundant, etc..
But it would be nice to have a bit more security on VPN other than just the connections of username and password.
If this is not possible, it is possible to configure the Anyconnect customer to IKEv1 with PSK and name at the level of the Group client?
If this is not possible, WTH did cisco end customer VPN cisco as a choice of VPN connection (other than to get more fresh mail of license)?
I really hope that something like this exists still!
THX,
WR
You are welcome
In addition to two factors, you can also do double authentication (ie the two using the user name and password). Each set of credentials can come from a Bank of different identities.
With this scheme, you can can configure a local user name (common) with password on the SAA (think of it as your analog PSK) and the other be the AD user identification information.
-
CISCO ANYCONNECT VPN CISCO VPN CLIENT
Hi, I was in the process of configuring cisco anyconnect vpn for ip phones to our local obtained the license for them either, the question that I get is that I already have remote configured cisco connect via the old cisco vpn client.
now, if I activate the anyconnect ssl on the same outside the interface both can exist without conflict or maybe I need to migrate users to install the end customer for anyconnect system software to connect.
I also need help with authentication of certification.
concerning
You can run both VPN at the same time without problems.
However, you should try and migrate everyone to the latest technology Anyconnect SSL anyway.
-
Compression & CISCO VPN Client
Hello
I'm trying to understand if the compression is available using a 5.x CISCO VPN client to a device of CISCO (ASA, 871 etc..)
Our site has recently moved from dial-in Windows, where compression is enabled, and we noticed the CISCO client show 'no compression '.
Thank you
Mario
This URL describes how to configure the compression on the SAA.
Compression can be configured as a parameter within the crypto ipsec transport-set in the IOS.
http://www.Cisco.com/en/us/customer/docs/iOS/Security/command/reference/sec_c3.html#wp1057372
Compression/decompression takes a toll hitting on the resources of the Cisco device if it lacks a hardware dedicated for these functions. You may want to limit its use to only where this is necessary for the remote access clients.
HTH
Maybe you are looking for
-
Satellite A200 - 1 GB: Questions on downgrade from Vista to XP
Hello. I have a Toshiba Satellite A200 - 1 GB and I want to downgrade to XP, but I have a few questions. + I install XP using nlite. + 1. I have 2 partitions and I would like to know if my other partition (not the one with the operating system) will
-
Creation of recovery disks without the ability to boot - Satellite L300
Hello! I have a Toshiba Satellite L300-139 (Vista, 160GG, 2 GB of memory). Hard drive has been damaged (when Vista starts, the system won't start at all, and each time only a white screen with the mouse arrow is shown--> tried all the choice + start
-
Computer will not work after you download service pack 2 for Windows Xp
Whenever I have download Xp SP2, my computer keeps restarting over and over again. What should I do to fix this?
-
How can I remove the printhead on serial printer F4400 clean and replace the print head?
I have an E error on the printer and when I replaced the black ink, that he stayed like this, I see the print head and I think it should be removed, because it shows the black ink.
-
somehow my trash has been removed and I can not find a way to recover it, can someone help me.
somehow my trash has been removed and I can not find a way to recover it, can someone help me.