Numbers larger than the text in numbered lists

Similar Questions

• First paragraph of the text is larger than the following paragraphs

  I have a page with a lot of text on the subject. For some reason, the first paragraph seems larger than the following paragraphs. But all that I checked shows that they are identical in terms of specs. I copied/pasted/no formatted/spruced up... but no matter what I do, that first paragraph is looking to be bigger! Is this some secret parameter that I don't know?

  I took screenshots and they are indeed the same size. But that first paragraph seems just different! Why would it be?

  I have attached a screenshot. Let me know if my client and I are just seeing things.

  Julie

  

  Seems to be the same size.

  See the image below, the first line of paragraph 2, overlapping the first paragraph. (o during even as o in the company)

  Can be an illusion of perspective due to all caps in the first paragraph.

  

• Now, the screen moves as the surface is larger than the actual size of the screen. I checked its display options, but how do I disable this screen oversized?

  Hello

  My mother was a member of the family to try to help inrease size but Bobo and now its screen in any program or simply from bottom of screen size is larger than the size of the screen.  She can move the mouse to the left to bring the extreme left veiw and then the same thing right but never have all the screen in veiw now.  How to restore to normal for her.  I tried control - display, but not... help her please help me

  Hi M Carmel,

  Thanks for posting in the Microsoft community.

  I understand that you are facing the issue with the resolution of the screen display.

  I suggest you to see the links and check.

  Change the resolution of your monitor

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/change-monitor-resolution

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows-XP/help/change-screen-resolution

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• Make the wallpaper slightly larger than the screen

  Hello

  I work with the simulator of the storm. I know that the screen size is fixed (obviously; "I think it's 320 x 480), but I want to make a slightly larger background image and allow scrolling horizontally and vertically.

  In other words, I want to be able to make a pan larger than the image of the screen; An image that has limits.

  I say, "which has limits," because I tried this, but the image is tiled, instead of being a single. A TI seems constantly to the left and down. Any help please.

  USE_ALL_HEIGHT and USE_ALL_WIDTH are a problem, as I predicted. Since you give your MyScreen VERTICAL_SCROLL and HORIZONTAL_SCROLL, it gives her children a height and a width of Integer.MAX_VALUE > 1. USE_ALL_HEIGHT and USE_ALL_WIDTH do all that great width and height.

  In order to make the screen exactly the size you want to substitute sublayout and take a look at net.rim.device.api.ui.Manager setVirtualExtent and setExtent methods. Some of the best examples of the override of this method are found in the code of

  Implement advanced buttons, fields and managers

  This code can be considered a bible of the BlackBerry user interface programming (Finally, at least for non touchscreen devices).

• Videos larger than the window display.

  I recently started having a problem with my g6 Pavilion by watching videos.  I noticed first on YouTube, but also can't play .mp4 files in Media Player.  I see that a small part of the video, it is larger than the window full screen, or display in this mode.

  After making sure the flash drive was up to date and quicktime (was grabbing at straws) I found that AMD video Steady was the issue.  Disabled and viola, playing the videos properly.

  Thanks for the suggestions anyway.

• Error: The file size for all drives of paging can be a little larger than the size you specified, when you open windows in Windows 7

  Original title: paging notice when open windows on mac, divide the hard disk

  I have a split hardrive on a MAC and windows, and quickbooks installed on this drive.  When I open windows, I get a notice of paging file.  -size of the paging file.  "The file size for all drives of paging can be a little larger than the specified size.  IM using Bootcamp for the windows side.  It is to show the memory almost full and I did not yet get many date in QB.  Don't know what I have to do.

  Hello

  1. have you done any software or changes to the material on the computer before this problem?

  2. it worked correctly previously?

  3. how many hard drives are in the computer?

  4. is the problem with a partition or a particular hard drive?

  Try the steps from the link.

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows7/change-the-size-of-virtual-memory

  What is virtual memory?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-virtual-memory

  Hope this information is useful.

• Updated data are larger than the buffer cache

  Hi Experts,

  I have a small request. I have a table called CONTENT to have 12 GB of data. Here, I pulled a single update statement that updates to 8 GB of CONTENTS table of data using 1 GB of database buffer cache?

  How 1 GB of the Database Buffer Cache will be used to update the 8 GB of data? Level architectural any additional changes will happen (than usual) when executing "Updated data is larger than the buffer cache"?

  Could someone of you please response. Thank you

  Database: 10.2.0.5

  OS: Power 5-64 bit AIX system

  Hello

  the basic mechanism is the following:

  needed to update data blocks are read from the data files and cached in memory (buffer cache), the update is made to the buffer cache and the front of the (UNDO) image is stored in the segments of cancellation, operation (update here) is re-encoded to redo buffer until it goes again files If the buffer is samll or we need more space in the buffer cache, or we have a control point or... Oracle writes back the block modified data files to free the memory buffer for the more blocks.

  While the other runs the update of transactions can read before you change the image of CANCEL if validation, at the end of the transaction done change is confirmed and validation is recorded in the redo. If the cancellation is made at the end of the transaction before the image is "restored" and rollback is saved in do it again.

  Concerning

• < Unspecified file name > file is larger than the maximum size supported by datastore '< indeterminate datastore >.

  I know that this issue has much spoken in the forums, but the answers are always to make sure that your block sizes are set to 8 MB - mine are already. Let me explain:

  I have a virtual machine with a large amount of connected storage - something along the lines of discs 10 x 1.99 to. Sit all VMDK on partitions of the VMFS of 8 MB of size block, including the configuration of the VM (location of the pagefile).

  Every time I try and snapshot of the virtual machine, I see the "< unspecified file name > file is larger than the maximum size supported by the data store ' < unspecified datastore >. All other virtual machines instant fine, but any other VM has a similar amount of storage as the VM problem.

  I have now moved the configuration files of the virtual machine to a new partition VMFS 5 of 1.91 TB, but the instant error persists. Most of the readers is sitting on VMFS 3.33 or 3.46. It will take me a while to move all VMFS 5 to see if that solves the problem.

  VMware.log for VM reports:

  2011-10-09T09:55:55.328Z| vcpu-0|  DiskLibCreateCustom: Unsupported disk capacity or disk capacity (2186928627712 bytes) is too large for vmfs file size.
  2011-10-09T09:55:55.328Z| vcpu-0| DISKLIB-LIB   : Failed to create link: The destination file system does not support large files (12)
  2011-10-09T09:55:55.328Z| vcpu-0| SNAPSHOT: SnapshotBranchDisk: Failed to branch disk: '/vmfs/volumes/4dc30ba3-b13c5026-92d8-d485643a1de4/spoon-app/spoon-app_2.vmdk' -> '/vmfs/volumes/4dc30ba3-b13c5026-92d8-d485643a1de4/spoon-app/spoon-app_2-000001.vmdk' : The destination file system does not support large files (12)
  
  

  My VMDK and volumes are smaller than 2032GB. I don't understand why, it's be a problem.

  Anyone have any ideas?

  Although ESXi 5 supports larger LUN as a raw physical devices (up to 64 TB), the maximum size of a virtual disk has not yet changed.

  André

• Shared pool larger than the buffer cache

  Hi all
  
  My database is 10.2.0.4 running linux platform
  
  No .of 2 cpu, RAM-2 GB
  
  SGA_TARGET wa set to 1 GB.
  
  Initially the memory have been configured as a shared pool around 300 MB and the buffer cache about 600 MB.
  
  When I questioned the v$ sga_resize_ops views I found some interesting results.
  
  Many operations and growth reduction were happened and the current size of the shared pool is about 600 MB and buffer cache is 300 MB. (this happened during last 1)
  
  I guess that the buffer cache must always be larger than the size compared to a shared pool. My assumption is right?
  
  Is it because of sql code using the do not bind variables resulting in growth shared pool? No relaods and radiation are almost ignored I think it should not be the case.
  
  Also no lock events listd in the top5
  
  I've also seen the 15% of the shared pool is marked as being of kGH:NO ACCESS, which means that the part is used for the cache buffers.
  
  Should I set the lower limit for the shared pool and the buffer cache or can I just ignore it.
  
  Thank you
  rajdhanvi

  You change your question now... your question was that he has sharedpool large size > buffer cache is acceptable... . Check your own second post... for your new question now is why pool continues to increase and partly used as buffer cache... the proof is given by tanel poder y what happens when EAMA is used... For the Kingston general hospital: NO ACCESS means that no one else could touch...

  Concerning
  Karan

• VMware Workstation is unable to open one of the virtual disks required by this virtual machine because it is larger than the maximum file size supported by the host file system.

  I'm transitioning from Windows XP (64-bit) on a new computer with Windows 7 installed.  I undertook to VMWare Workstation 6 7.0.1 in the process.  The problem is with a very large RAID 5 volume on the new system.  It's a score of 5.45 TB (TPG and NTFS).

  When I try to start a virtual machine on this volume, I get the message "VMware Workstation cannot open one of the virtual disks required by this virtual machine because it is larger than the maximum size of the files supported by the host file system.".  This is obviously not true.  If I copy the virtual machine to another drive on the system, it starts without a problem.

  Anyone have any ideas on how to work around this problem?

  try to add this line in the vmx file:

  diskLib.sparseMaxFileSizeCheck = "false".

  Maybe it helps.

  VMDK-type do you use?

  monolithicSparse? -C' is the only part type more?

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• ORA-01438: value larger than the precision specified for this column?

  Hi guys:
  
  I'm stuck in this error when I try to do an insert into a table. My Source has 581K records, but only this code and the values described below gives me a headache.
  
  Here's the DDL for the source and the target.
  
  CREATE TABLE WRK. VL_FREED
  ('CODE' VARCHAR2 (9))
  NUMBER (15.7) "VL_FREED".
  )
  
  CREATE TABLE WRK. VL_RENEG
  ('CODE' VARCHAR2 (9))
  NUMBER (15.7) "VL_RENEG".
  )
  
  CREATE TABLE WRK. WRK_XPTO
  ('CODE' VARCHAR2 (9))
  NUMBER (15,10) "VL_XPTO".
  )
  
  ------------------------------------------------
  The values for the VL_FREED AND VL_RENEG tables:
  
  
  CODE = 458330728 (same on both)
  VL_FREED = 191245.3000000
  VL_RENEG = 74095.3800000
  
  -------------------------------------------------
  
  When I try to run this insert:
  
  INSERT INTO WRK. WRK_XPTO
  (
  CODE,
  VL_XPTO
  )
  Select
  T1. CODE,
  T1. VL_FREED - T2. VL_RENEG
  of WRK. VL_FREED T1, WRK. VL_RENEG T2
  WHERE
  (T1. CD_CODE = T2. CODE);
  
  I got the error:
  ORA-01438: value larger than the precision specified for the column
  
  But how can this be? The result of 191245.3000000 - 74095.3800000 is not greater than a number (15,10).
  
  Can someone help me on this?

  Number (15,10) means 15 total digits, 10 of which are to the right of the decimal separator, leaving only 5 on the left.

  190 000 - 75 000 = 115 000 (6 digits).

• The size of the estimated value of the project is larger than the chosen target support

  I am at a loss for trying to create a project using Adobe Encore.  I tried initially to the author of the project using the CS2 version.  When you try to export, I received the following message is displayed:

  "The size of the estimated value of the project is larger than the chosen target support.  While it is an estimate, the project may not build. »

  I have created hundreds of projects in the past, but have never received this message before.  I first thought that the problem was with the release of still I used, but I got the exact error that even trying to create the project with Encore CS5.

  The project itself has a menu, a motion menu, and a single video file.  The video file 152 last minute, and I was trying to export that to a double layer DVD.  I tried from the file using CS5.5 Adobe Premier export using a variety of parameters.  I'm trying to export it to a file DVD-2, with the attributes of soure game being the highest value.  The parameter on the main concept MPEG encoder is set to 5. I tried to export the file by using the constant and variable bitrates.

  When I recently exported the file using a contant 6.5 sampling rate, I still 650,4 Mo still remaining on my project.  I still received the same error message on the size of the project, and so I think that something is wrong.

  I even exported the video file into an AVI file compressed and then tried to coding again using CS5.5 Adobe Premier and Adobe encoder.  I always get the same error message on the size of the file.

  Any help or suggestions on how to solve this problem would be greatly appreciated.  Thank you!

  If you do not finish with wasted discs...

  Create an ISO (yet), or a folder on your hard drive (still or Premiere Elements), then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO on DVD or BluRay drive (send the author a PayPal donation if you like his program)

  .

  ImgBurn will read the mark of REAL from the disk drive, which isn't always the same as the label for the box (Memorex is known for 'nothing' buy and put inside a box of Memorex)

  .

  When you write on the disk with Imgburn, use speed SLOWEST possible setting, so your burner has the best chance to create "good, well trained" laser drill holes... Since no DVD drive is required to read a burned disc, have a 'good' after a try to white high quality will help

  .

  Use Taiyo Yuden simple layer or layer two Verbatim

  Or Falcon Pro for inkjet printable two layer

• ORA-01438: value larger than the precision specified for the column '

  When inserting the different entries of cheaper products in this table PF_PRODUCT_VIEWS_PROFILE, I'm having this problem of "java.sql.SQLException: ORA-01438: value larger than the precision specified for the column '.»
  
  
  As I see it in the tables (desc pf4. PF_PRODUCT_VIEWS_PROFILE; & PFCA4 of ESCR. DCS_PRICE_LEVEL;), I see the accuracy for the price of the table PF_PRODUCT_VIEWS_PROFILE as NUMBER (12.7) & accuracy for the price of the table DCS_PRICE_LEVEL as NUMBER (19.7). There is therefore a difference in precision 7 units for the price in the PF_PRODUCT_VIEWS_PROFILE table that is causing this problem. So that would be the solution.
  
  
  Could you please post my comments, so that I can change the accuracy for the price of the PF_PRODUCT_VIEWS_PROFILE table.
  Need to confirm other columns in the table PF_PRODUCT_VIEWS_PROFILE does not exceed their precision values before making this change.

  Hello

  Ideally avoid data loss as you increase the length of the column as it really is. You have to worry about this in the case if you reduce the length. It is always better to be doubly sure, so also check other tables.

  see you soon

  VT

• Change to the text field selection list

  Hi guys,.

  How can I create a dynamic action at random an element to the list of selection in the text field?

  I use a group of buttons radio with two options: YES and no.

  I don't want to not create two items because I'm using the same database column.

  I tried before with two elements "power off" and "carriers", but without success.

  Can you help me?

  Thank you

  Eric

  Eric.Sacramento wrote:

  Already tried that, please see the photo.

  I'm doing something wrong?

  The error message indicates that there is more than one item referring to the same column name. Follow the instructions given above for only a single and invisible element is related to the database column. Shadow points that actually appear in the user interface must not be bound to the database column, but get their initial value of this article, and conditional calculations should be used to copy the input value in the user interface elements for the element to a database column.

• JFrame window grows larger than the screen

  I write a simple Java program that reads HTML files and displays on JEditorPane. The JEditorPane has get that controls scrolling. The problem is when large text, the size of the window becomes large and no scroll bar is available even if the text is greater than the visible window. Sometimes, it works normally showing the content with the scroll bar to navigate. If I reduce the window and then blow it up, disappears from the bar scroll and part of the mask window down on the taskbar and screen. In this case otherwise which means once it is ok, if I minimize and optimize, there is no scroll bar, if I minimize and maximize again, then it's ok, etc.
  
  What do you think is the cause? How can I solve this? Thanks in advance!

  Delete:

  treescroller.setPreferredSize(new Dimension(300, screenSize.height - 155));
  

  And use a BorderLayout place a FlowLayout with toolbar in PAGE_START, Voletfractionne in the CENTER and the tray to the PAGE_END.

  Published by: Walter Laan on July 4, 2012 11:43