Very slow to launch the desktop files/programs

Similar Questions

• X 220 very slow fill in the list of programs in the control panel

  Hello guys,.

  I have 3 thinkpads to home, 1 T420, 1 X 200 and 1 X 220, who happens to have the highest spec (maxed out, i7, Intel SSD 320, 8 GB ram). All are running Win7 X 64, but strangely X 220 is very slow fill the program list when I select panel-> uninstall a program. The two other machine can finish populating the list in less than 3 seconds, while X 220 sometims needs more than 30 seconds to fill completely the list.

  The number of programs installed in X 220 97, how many not much more than the other two. I'm very * beep * on my X 220 and has the latest drivers of Lenovo.

  Other than this issue, the laptop is majorly without problem. Not sure, it's software or hardware problem.

  Someone has an idea of what went wrong or have similar problem?

  Thank you

  Thanks for all the answers. It turns out that this has something to do with group policy that applies to all computers in the company, others in our society have the same problem of population slow list.

  The reason that our home computers do not have this problem is because they are not imposed to politics.

• I downloaded 8.1 on my iPad a few months ago and it has become very slow especially in the e-mail program and glitch

  I have an iPad mini version 9.02. a few months ago, I downloaded the latest operating system from Apple 8.1 and my iPad became very slow and glitchy especially in the e-mail software... What can I do?  Now it asks me to upgrade to iOS 9.1 and I fear that it will be even worse.

  Sorry - but what do you mean you have an iPad Mini version 9.02? What are your reference when citing 9.02?

  At this point, your best bet is to keep the device up to date. The latest version of iOS is 9.2. It's what you could be upgraded to.

  See you soon,.

  GB

• Whenever I open my computer I get the following message is displayed as a pop-up on the desktop: C:\PROGRAMA~2 Kodak\EasyShareSetup\$Regis~1\Registration_7.2.20.2.stx

  Whenever I open my computer I get the following message is displayed as a pop-up on the desktop: C:\PROGRAMA~2 Kodak\EasyShareSetup\$Regis~1\Registration_7.2.20.2.stx I don't have Kodak on my computer and I typed Kodak in the search above Start section and checked my programs.

  How do I get this off of my computer?  Any suggestions appreciated woul

  I typed Kodak in search above to start section and checked my programs.

  Instead do with msinfo32.exe to open system information.   Then, in the Environment\Startup software do a find, category searches only for Kodak

  Even better would be to use AutoRuns (utility system available on TechNet).

  HTH

  Robert Aldwinckle
  ---

• I've updated my xperia neo to andriod 4.01, my laptop is now very slow, how do the previous version of andriod?

  I've updated my xperia neo to andriod 4.01, my laptop is now very slow, how do the previous version of andriod?

  you have 2 options

  (1) bring it to a Sony repair center

  http://www.sonymobile.com/global-en/support/contact-us/

  or

  (2) use flashtool for downgrade

  Don't forget to mark the correct answers & useful answers

• T42 very slow to start up and open programs

  I have a T42 that is very slow to start and go to programs.  Operating system is Windows XP.  Any suggestions would be greatly appreciated!  Thank you!

  
  

• Small batch. Review, edit and save to the desktop file.

  I have 50 or more photos of the weekend. I have already created an Album called 'Birthday 2015' and all images imported into this Album.  I want to review them and keep the top 25 or more.  Then cultures, change and save these 25 only to a folder on my computer desk. I want to move this folder over to a SD card or USB key to send to a family member. They want just the photo files, not a slide show or anything like that.  I want to keep the originals of all 50, as well as the finite set of 25.   This will be my first time using Photoshop elements 13 for what that this or another can touch a single image to print at home.   What is the process for this?  It is an 'event', a 'project' I drop the unwanted, those of the Album (how I do that) or simply to 'save' the finished a separate desktop file I'll?  How do I "save under" the picture over to the desktop file? 

  Thank you

  Mike
  

  michaelg7242004 wrote:

  I have 50 or more photos of the weekend. I have already created an Album called 'Birthday 2015' and all images imported into this Album.  I want to revisit and keep the top 25 or more.  Then cultures, change and save these 25 only to a folder on my computer desk. I want to move this folder over to a SD card or USB key to send to a family member. They want just the photo files, not a slide show or anything like that.  I want to keep the originals of all 50, as well as the finite set of 25.   This will be my first time using Photoshop elements 13 for what that this or another can touch a single image to print at home.   What is the process for this?  It is an 'event', a 'project' I drop the unwanted album (how I do that) or just 'save' finishes to a file separate from the Office I'll?  How do I "save under" the picture over to the desktop file?

  Thank you

  Mike

  Mike,

  The two following tips should help you:

  -1- creating a new album of an existing

  An album in your current catalog is a list of files, just like a playlist for audio files. If you want a selection (a subset) of these files, you simply create an empty album. Select the view original album, select the required pictures (easy if you have assigned a given star) by the shortcut Ctrl A, and then drag and drop in the new album of emptiness.

  -2-hourly using 'Export' of the Organizer.

  What you want to do, who prepares the files to a new location or media selected, is called "exporter" in the elements or Lightroom.

  When you're in the Organizer, select the thumbnails (highlighted), you must use the menu file/export or the shortcut Ctrl E. The dialogue then you box will allow to choose not only the target medium or the folder where you want to copy your files. More important still, it allows you to choose the file format and size of the exported files and it can rename them in order to preserve the custom in the album sort order.

  Which is a bit more complex is to work with the original and edited versions if you have version ' sets ' and albums at the same time. If you do not use version sets, no problem. You export originals and files published in two different lots with different subfolders.

  If you use sets of version, which means that the edited versions are attached to the original and you have chosen the version to display at the top of the version set in the navigation area. It is only as the displayed version which is exported. People are generally perplexed when they create sous-albums as described above. Whether you have your album ready for export with the edited versions. You want to export the original separately in a different folder. This would mean that you change the display order of versions to show the original as "top version" for each image. The information about the item "top version" are independent albums: If change you in one album, if the photos are also included in a different album, the 'top' of the version will also change.

  The simple solution if you want to export original and edited separately versions would be to export original first, then do the editing and export the edited versions shown in your albums.

  Once you have the version sets in your albums, you can't easily get to the originals. This would mean using the menu edition/version the value to be converted into individual elements and lose the link between the original and edited version.

  I should mention that the use of the albums is a way to use the Organizer to export your selected objects.

  If you are using categories and keywords, you can select (highlight) your files and export as explained above.

  You can also use the menu file/export to media removable (Ctrl + Shift + O) to copy to flash drive or SD card.

• Problem correct launch of sequences shortcut on the desktop file

  I created a shortcut on the desktop that runs successfully a sequence file.  The icon I have chosen was "C:\Program NIUninstaller Instruments\TestStand 3.5\UserInterfaces\Full-Featured\LabVIEW\TestExec.exe".  The problem is the following:

  I have several set up desktop shortcuts to launch multiple sequence files.

  If the operator closes TestStand before closing the current file in the sequence, by activating another shortcut, TestStand opens with the previous sequence file loaded.  The file in the correct sequence is displayed in the ListBox on the left of the screen; However, the file of the previous sequence is loaded.  This will inevitably cause confusion with the operator.

  Any ideas will be appreciated.

  Thanks in advance.

  2 options:

  1. tell the users to close the sequence when they are made by choosing File > close all files of sequence and executions.  TestStand remembers the last sequence which was open.  He re - opens there next time that TestStand gets run.

  2. change the source code of TestExec.exe close the file in sequence on farm.  Or do not remember the open movie file.  If you are using the full user interface, you want to look in the VI called Full UI - configure Application Manager.vi which is called UI - full Initialize.vi.  You will see a property with ReloadSequenceFilesOnStart node.  Change the enum to ReloadFile_All to ReloadFile_None.  Rebuild the exe file, and then deploy it.  You will have to look for it if you use the Simple graphic interface, but it will be the same property node.

  If you go with several it's more work for you, but then you don't have the problem of the operators running the wrong test on WEAR it wrong.  Option 1 is a matter of training.

• Windows 7 Media Center very slow to load the program guide

  I run a Fujitsu Esprimo E3521 Core 2 Duo 2.93GHz with 2 GB of Ram. I use a dual DVB - T2 tuner card black gold. The PC works as expected with all other tasks (Netflix, iPlayer, MyMovies for Media Center), but when I first load the program guide, it takes more than 30 seconds before the system displays the guide and becomes sensitive (later loading times are a little faster, unless the PC is in "standby", in which case I face the same deadline when you enter the program guide). There is no other applications running on the system (the PC directly in the MC boots). Once the guide is loaded, it works at normal speed (sometimes channel tuning may take longer than expected, but usually he settles in a few seconds).

  I'm running Windows 7 Ultimate. Recently, I reinstalled the operating system and for a few days the PC seems to be running OK, but he soon return to be incredibly slow, loading guide. (I also started to notice that it takes longer time to start playback of recorded assets).

  Any help or pointers would be appreciated.

  Thank you very much

  R

  (Moved to programs)

  Hi Richard,

  Welcome to Microsoft Community forum.  Let me help you with your concern.

  The information in the Guide is periodically downloaded from the Internet from your Guide list service provider. You are notified that "no data is available" in the Guide in the case either of the following things:

  • Windows Media Center cannot connect to the Internet and download the new Guide information for a long period of time, and the Guide information that was previously downloaded is corrupt or has expired. For more information, see solving problems with an Internet connection. (Applicable for Windows 7 alos article)
  • Guide information is not available for your location from the lists Guide service provider. For more information, see download updated Guide listings. (Applicable for Windows 7 alos article)

  You can see this Microsoft article and check if it helps:

  http://Windows.Microsoft.com/is-is/Windows/use-guide-Media-Center#1TC=Windows-7

  If the Guide appears blank and manually download the latest announcements of Guide doesn't seem to work, you may need to set up your TV signal again. To learn how, see set up a signal TV in Windows Media Center.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Very slow computer after the latest updates

  Hello

  I've updated one of my PCs running Vista x 64 updates of security two days ago.
  Now that the systems takes more than 15 minutes just to start at the opening screen of session and as much time again to get on the desktop.
  The mouse cursor is always fast as usual, but everything else including the caret blink time is super slow.

  This is a really clean system which is used strictly for dedicated 3D work, so he has nothing but Max, EU3 and WinZip on it.  It is not used for Internet access.
  No hardware or software changes attempted in several months, other than updates Windows System.
  Intel C2Q Q6600, 8 GB 1066 RAM, NVidia 8800GTS 512, WD 500 GB HD, ASUS P5K mobo.

  I was wondering if anyone else has experienced this problem with updates, especially as it's really painful trying to solve the problems since that it literally takes hours to try whatever it locate either changes the problem.  I'll do a wipe and reinstall if I have to spend a lot more time with reboots, it will be faster.

  I am answering my own question here... :-)
  Maybe it will help someone else and save a few hours of work waiting for the slow start to fix things.

  For those who are interested: the OS is Vista Home Premium x 64. Material has been listed above. It is a high-end with hardware system high range, coolers, cases, power supply, etc.
  This is not a system of job full time, it is used only for specific work I usually do a few hours on one or two days a week.

  I timed it really starts the Welcome screen and it is more than 45 minutes. lol :-D
  I pulled off the side of the case and noticed that the HDD was just chewing on something.
  Start in safe mode was also just as painfully slow as standard start (argh).

  Regarding the updates of Windows, I have this system set to inform only, so I only install updates at the end of all the days that I work on the computer. Where my assumption that it's a matter of update that caused the problem, since nothing ever changes, on this subject - files are still saved out to a network server.

  However, once I could get on the computer, I noticed that I had also installed Windows Live Mail top the same day I did the updates of Windows (two days ago). WLM has been installed just to get a screenshot of it for my blog, it was never really used for Internet e-mail, it should be uninstalled some time on one of the next system bootups.

  Then... Installation apparently a combination of WLM or the latest Windows updates has completely borked something on the computer starts.
  I got my DVD of Vista, it started, ran the Startup Repair. Now, the system works very well. WLM has been uninstalled in the case where it has been part or all of the guilty.
  As with a PC, it could be something to do with the specific hardware and software configuration, the order of WLM and updates installed, specific updates installed, etc..

  I would recommend that anyone with a similar configuration be sure to install WLM or updates in the estate where they fall in the same question.
  Just don't panic if you have problems, try a DVD Vista Startup Repair. :-)

• Very slow to load the page Office getting black screen after the homepage at startup?

  On startup, I get a black screen with cursor after the homepage that it hangs for 30 seconds to a minute before the loading of my office and after that everything loads very

  fast? can someone help me with this please.
  Acer laptop 500hdd, mem 4 GB, vista sp2 Home premium 32-bit
  
  
  Gerry

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore
  It only needs to be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI
  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions.
  You will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Desktop icons do not appear on the desktop, and programs in the task bar screens are too small to read, what now?

  It's very frustrating to see the program I want to open the office toolbar but when I click it, the window opens so small I can't read and only shows when I hover over the icon in the toolbar.  Help please, what I do?

  Hi Wendy,.

  I imagine the inconvenience that you are experiencing.

  To create a shortcut on the desktop, follow these steps and check:

  (a) access the program, file, or folder that you want a shortcut to.
  (b) make a right click on the item you want the shortcut and select "send to", then
  "Desktop (create shortcut)".

  I suggest you for the link and check if that helps:

  The use of the taskbar

  http://Windows.Microsoft.com/en-in/Windows-8/use-the-taskbar

  To maximize the window that you can open, press the Windows logo key + up arrow.

  See also:

  Make the text on the screen larger or smaller

  http://Windows.Microsoft.com/en-in/Windows-8/make-text-screen-larger-smaller

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Very slow connection to the LAN on my Tecra M1

  Hi all

  I use a Toshiba Tecra M1 1 .6GHz, Win XP.

  I found that there is a problem with the connection to the local network. It is very slow. I takes about 5 minutes to download 1 MB. It's really a lot of time if I want to download and update some software over the internet.

  I also have an office. It is quite a bit old but the connection to the local network is much faster than my laptop; for example, I downloaded Windows Mediaplayer 10 - about 12 MB by using desktop and laptop at the same time to compare, the Office has taken 2-3 minutes while the laptop ate more than 20 minutes. I switched the cable between the office and cell phones, but it did not help.

  We know the problem and the solution?

  Much thanks.

  Hello

  Nick is on the right track. Who knows what runs in the background and applications who wants to access the internet. I recommend you to use the tool called Zone alarm. On this way, you will have full control over the applications that want to access the internet.

• Satellite A505-S6030 - very weak performance in the moving files and folders

  Hello

  My problem is the speed of copying files from the laptop to the usb device and versa
  When I copied about 5 gega file it takes more than 12 minutes to transfer to the usb device... He started at 20 MB/sec so it keep more slow until it become 5 mb/s

  I dono if the thing copy depends on the memory or processor, but it the big two in this portable 4 gega ram it was just 1.4 use when copying and core i7 performance I see in the Manager of tasks it is 1% cpu usage... so I don't know where the problem is in this file of very slow copy... Please help : S

  'Sorry for my bad English'... .and please send me notification if the admin is going to pass this subject from another section in the site becauz I really don't know where I should write down it

  Thank you very much :D

  Perhaps, there is a lot of activity on the laptop while the files are moving the HARD local to another external drive.
  The same thing happens to me when I copy movies on external HARD drive. If I leave it and don t touch anything move/copy turns faster. When I'm doing something at the same time the transfer will be slow.

• Satellite A300 - very slow meeting of the Windows operating system

  Hello
  I have a Toshiba a300.
  I am facing a lot of problems with it.
  First of all, very slow sound at startup... I ' v read read this post

  -remove all unnecessary software system
  -remove the preinstalled application antivir and installing Avira Antivir software (without a doubt the best for me because he didn't need as many resources)
  -deactivation of departure for everything that I have addresses Don ¢ ' t need (MSCONFIG)
  -Disabling all components material I don't need in the Manager device (modem, multicard reader, PCMCIA slot, firewire)

  Pls u can mention precisely what are all unnecessary software in my laptop... It's first time im having a computer so I donnno much...
  I use kaspersky anti virus. Should I switch to avira? I am also faced with another problem. My led on/off function does not work instead, it acts as a mute button. It used to be well earlier... I tried support button (dimmer.exe), Setup of HW, but both failed... then I uninstalled reinstalled n some added value pack from an Australian site, but who has not too... pls help... I'm p * OFF... all the suggestions/help will be really appreciated.

  > Pls u can mention precisely what are all s unnecessary software in my laptop...

  Only you can decide what software is not important to you
  Toshiba has preinstalled many different programs. Most of these applications control certain features of the laptop as keys FN, controls, etc., but of course, this software needs of material resources and slow down the start-up procedure.

  In MSCONFIG, you can disable some processes and could test how the laptop would be without these applications.

  In addition, I recommend to update or remove the Tempro tool, which has been pre-installed by Toshiba!

  The Avira scanner is great. I m using both and it s free.
  This eater of low material s and, therefore, the laptop should start more quickly instead of using Avira Kaspersky.