Numlock stops working on the Qosmio F750

Similar Questions

• Impossible to get free 3D glasses to work on the Qosmio F750

  Hello

  I tried to make it work on my Qosmio F750 without success. whenever I try to not calibrate the 3D using the face recognition, theres no poping window until the recognition of face, am I missing any driver?

  Hello

  Can you please post exact model laptop number?

  Usually the X-Tune: software must be pre-installed on a Qosmio F750.
  This software allows you to calibrate the 3D effect.
  http://APS2.toshiba-tro.de/KB0/TSB1C038D0000R01.htm

  Please be sure that Super-d Driver IC (V1.0.1613.809 or later) has been installed
  All these software and drivers should be available on the Toshiba driver page.

• Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?

  Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.

  I tried to reset firefox and search for similar problems, unfortunately found nothing.

  It is also weird empty space before the address in the address bar

  other extensions and addons seems to work very well.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.

  Any difference?

  Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.

• HP ENVY laptop - 15-ae178ca: Second monitor stopped working after the automatic update of HP

  I use my laptop with a second monitor (HP Pavillion 22xw) connected by HDMI. It was working fine until yesterday (including yesterday it worked), when a message from automatic upgrade HP was shown to informing him that the system needs to be restarted. After that, my second monitor stopped working. The system will not identify it more. I tried another cable, I rebooted several times, I tried to update the specific Intel graphics driver, I tried to uninstall and install manually another (I can't get this one done, because when I run manually downloaded driver there is a message saying that I need to contact the manufacturer). Please notify that I need my second monitor is fully functional!

  Hello @MAlex_B,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the display and wanted to help you!  I see only after an update, the external monitor no longer works.

  Given that this problem happened recently, have you tried to perform a System Restore, to define the notebook to its previous working state?  If this does not work, have you tried to update the drivers of graphics Chipset and BIOS on the HP website directly?  You can find the drivers for you product here: drivers - HP's ENVY for laptop - 15-ae178ca

  Please post back with the results.  Let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Fan has stopped working on the satellite

  I've had the laptop for jusy 7 weeks and the fan has stopped working. It always seemed that he ran too to what looks like at full speed almost constantly, but now its stopped.

  I just tried to call the helpline and ended up leaving a message to be recalled. They work on Sunday?

  How long they tend to take to fix these things?

  Hello

  I put t know 100% if they work on Sunday, but I presume that they don t
  However, can you please tell what camera do you use?

  I can t believe that if fans stopped working then the laptop should automatically stops or the CPU overheats! It is very dangerous because the laptop and the motherboard may cause damage.
  So if the fans don't turn you should not turn on the laptop.

  But maybe the cooling modules run only with the lower speed?
  This is not unusual. The BIOS and the energy-saving control the speed of the CPU and cooling modes. Fans should not run with maximum efficiency if the temperature does not increase.

• Speakers have stopped working on the Satellite a series

  I have a laptop satellite - not sure what mono - speakers have stopped working and are unable to turn back.

  Have tried checking volumen and none controls mute buttons are slected. tested and it says ther no problem but still no sound. have uninstalled the driver and reinstalled - what else can I try?

  > have a portable satellite - not sure that we
  Roll on Notepad and check the label at the bottom of the unit. You will find the name of the laptop!

  > Speakers have stopped working on the Satellite a series
  Open the Device Manager and check if no yellow exclamation point appears. If you can see this yellow sigh perhaps the sound card driver is not installed correctly.

  In addition, please plug the headphones to your laptop and check if you can hear anything through the headphones.

• Ethernet and power to stop work on the Thunderbolt display

  I have my MBP connected to a thunderbolt, power of the connection screen and using the ethernet on love at first sight port to connect to my router.

  These two functions has stopped working. The USB ports still work and the works of the display, but stopped power and ethernet. Is there a way to re - configure or troubleshoot this?

  You can unplug the TBD from the wall, wait 3 minutes and reconnect.  Who can help.

• Digital Persona software stops working on the Pavilion dv8-1250ea

  Hello!

  I noticed that Digital Persona, the software for the JJUJ scanner integrated on my HP Pavilion dv8-1250ea stops working whenever the laptop wakes from standby or hybernation mode. On the login screen, the icon on the right referring to the fingerprint reader warning flashing at a rate of about twice a second and the following note says "fingerprint reader not detected". So I'll type the password manually, but the cursor in the field password prevents jump at the beginning of the field at the same pace, and it seems as if there is a current discount. The only way to log is press the 'end' key immediately before each character in the password, which is a disappointment.

  I recently downloaded an update for Digital Persona, but it has not solved the problem.

  Any ideas how to fix? Thanks in advance!

  Andrey

  Here is a work around, see if it works... You will need to go to Device Manager, depending on what hardware you have; AuthenTec orvalidity... Double-click on it... who will launch the Properties Windows... Click on tab power management... this tab, uncheck the box that reads "allow the computer to turn off the device to save power"... and see if it works... ' "

• Outlook express has just stopped working error: the connection to the server has failed. Error number: 0x800CCC0E

  Original title: outlook express just stopped working

  The connection to the server has failed. Account: 'sale', server: 'mail.thornroofing.com.au', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 10013, error number: 0x800CCC0E

  the message it gives, have disabled norton e-mail analysis?

  the message it gives, have disabled norton e-mail analysis?

  
   
  Try a test message with Norton shuts down completely. If it works, remove Norton and do a custom Setup, opting out e-mail Scanner when it is offered. Sometimes just turn off is not enough.

• my collection-windows photo gallery stops working in the first 5 seconds

  my collection-windows photo gallery stops working in the first 5 seconds

  No guarantee... but following Microsoft "don't fix" may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Photo and slideshow problems
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/en-us

• Error: 0xc0000005, installer of Windows modules stopped working and the launch failed password

  Original title: Hello,.

  my Dell computer is running the following errors: 0xc0000005, modules Installer Windows stopped working and the Word failed to launch. I need help with this.  My system is Vista Home. Thank you.

  Hello Ewazn,

  ·         You get this error message only when you launch Microsoft Office applications or launch any application?

  You can view the article in the Microsoft Knowledge Base and check if it helps.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Please elaborate on the question so that we can help you in a better way.

• I can not download the Flash Player. GetPlus + R stops working during the process

  I can not download the Flash Player.  GetPlus + R stops working during the process

  Hey Kevin,

  A. what browser do you use to download flash player?

  Have b. you tried with another browser?

  Have c. you downloaded this earlier?

  Please, try the following steps.

  Step 1: uninstall previous versions of Flash Player

  Before you install Flash Player for any Windows browser, uninstall all previous versions, and then restart your computer. Try to download flash player, if it does not work then uninstall Download Manager and check.

  Step 2: Verify Internet Explorer security and ActiveX settings

  Make sure that the Internet Explorer security is set at a level that allows viewing ActiveX controls. The medium: default level allows you to view the Flash content. For any custom level, follow the instructions below. (Contact your system administrator for more information.)

  To change your security level:

  1. open Internet Explorer.
  2. choose Tools > Internet Options.
  3. Select the Security tab.
  4. Select the custom level.
  5. Locate the section "ActiveX controls and plug-ins.
  6. set "Download signed ActiveX controls" at the command prompt.
  7. the value "Run ActiveX controls and Plug-ins" Prompt.

  Step 3:

  Download and install the flash player.
  http://get.Adobe.com/flashplayer/

  Reference:
  http://kb2.Adobe.com/CPS/191/tn_19166.html

  You can also post your questions in the Adobe forums.
  http://forums.Adobe.com/index.jspa

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Links for Smartphones blackBerry stopped working in the browser

  Yesterday, the links Hypertext has stopped working in the Blackberry browser.  In other words, when I click on a link, it highlights, but it won't pick up the page a hyperlink.  It does not display a status of "loading" at the bottom of the screen.

  The screen click on works fine in other applications.  The screen click on works fine in the browser when you use the menus.  It works simply when you click a hyperlink on a web page.

  It was all working fine until I did a Facebook mobile Web page.  This isn't Facebook mobile app, but the mobile Web site read using the Blackberry browser.  I went through the Facebook mobile site on the Blackberry browser several times, and then the links stopped working and no longer works for any Web site.

  I checked the settings and checked and checked and can't seem to find a solution.

  I deleted all the cache of the browser.

  I have not changed the browser settings.

  I was already running OS v4.7.0.75

  Application memory space: 9,4 Mo

  The total memory space: 879.2 mb

  Memory device free space: 853,6 mb

  Space media card Total: 7.3 GB

  Clear media card: 7.3 GB

  Does anyone have a solution?

  Hi and welcome to the Forums!

  Whenever random strange behaviors creep, the best thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, this one suffers memory leaks and other... with a hard reboot is the best remedy. Some have taken to do this on a recurring basis as a preventive measure.

  Best!

• My bi-ecrans Setup has stopped working with the latest update of Windows

  My bi-ecrans Setup has stopped working since the last windows update.  The second screen is relegated to never turn on and in the part 'View' of the Control Panel, I can't change the 2nd monitor resolution of anything in addition to 480 x 640.  I installed the latest drivers for the video card and two monitors.  I have everything down, powered, entretienavec left for a few minutes and fed up, nothing.  It has been like that for a few days now.  Any advice would be very useful,

  Thank you

  Tyler

  Details:

  PC: HP Compaq 8200 Elite

  Graphics card: AMD Radeon HD 6500 Series

  First monitor: ViewSonic 2030

  Second monitor: Dell 1908FP

  All pilots are underway according to Dell, ViewSonic, AMD and Microsoft.

  Latest patches from Windows Update killed my dual Setup monitor:

  Update of security for Microsoft Office PowerPoint 2007 (KB2596764)

  A security update cumulative for the stop bits ActiveX for Windows 7 for x 64-based systems (KB2618451)

  X 64-December Windows malicious software removal tool (KB890830) 2011

  Update security for Windows 7 for x 64-based systems (KB2620712)

  Update of security for Microsoft Office PowerPoint 2007 (KB2596912)

  Update for Microsoft Office Excel 2007 (KB2596596)

  Update of security for Microsoft Office Publisher 2007 (KB2596705)

  Update of security suites for Microsoft Office 2007 (KB2596785)

  Cumulative Security Update for Internet Explorer 9 for Windows 7 for x 64-based systems (KB2618444)

  Updated for suites Microsoft Office 2007 (KB2596651)

  Update security for Windows 7 for x 64-based systems (KB2639417)

  Updated for suites Microsoft Office 2007 (KB2596789)

  Update security for Windows 7 for x 64-based systems (KB2619339)

  Update for Windows 7 for x 64-based systems (KB2633952)

  There is no update stated in your post which could have implications on your graphics card, or its driver.

  Have you installed the latest graphic driver AMD in the AMD site?

  http://sites.AMD.com/us/game/downloads/pages/radeon_win7-32.aspx

  NB this link is the 32-bit win7 driver.

• I can't change my PDF even if I pay for the plan of creative cloud. It seems that it has stopped working over the weekend.  Someone knows why?

  I can't change my PDF even if I pay for the plan of creative cloud. It seems that it has stopped working over the weekend.  Someone knows why?

  I worked on it. For some reason, he opened my PDF in Adobe Reader DC and DC Pro not Adobe.  Once I have it open as a Pro it works beautifully and I could edit.