Impossible to get free 3D glasses to work on the Qosmio F750

Similar Questions

• Impossible to get PRTSCR DEL + keys to work on the Satellite A100

  I have the Satellite A100 - 232 PSAA2E. Bought in Greece... If some of the keys have a second role - for Greek letters. Especially not a problem.

  However... I can't get led (top-right) to work and same (3buttons on the left led) the print. Is there a setting to change or is there another way to remove and print screen?

  Your ad is somewhat confusing. Satellite A100 is pretty old laptop so I do not understand how you have this problem now.

  Everything was ok in the past?

  As far as I know you can change the keyboard input language, but this has nothing to do with DEL or PRINT key features.

• Impossible to get Windows Vista Mail to work since the installation of FireFox

  In recent weeks, been unable to access the Internet or use any messaging service using IE8. Internet Explorer opens not - except in safe mode with network. I spent several hours to solve this problem without success. Then as a last resort, I downloaded and installed Firefox and in normal mode the page Firefox came and I have full access to the Internet and Microsoft Hotmail - however I can't get Windows Vista Mail to work.

  WMUtil is very easy to perform and can fix things.  Especially if you got rid of McAfee.  You may still need to remove your e-mail account and then add again, but it's also easy to do.

  Many people find Thunderbird much more preferable to alternatives to Microsoft.

  Steve

• Numlock stops working on the Qosmio F750

  Hello

  I have a Qosmio F750-11 t. Four days ago, I started my laptop and discovered my num lock stops working. The light still comes on, but the buttons do not respond. I can't turn the NumLock or off and I can ' t produce numbers more with him (or use the pgup pgdn buttons when it should be off).

  I have read a few things on the forum (.com) and updated the BIOS to the latest version, restarted it, but nothing works.

  I bought the laptop 3 months ago only. I would be grateful if someone could help me with this.

  Thank you!

  Post edited by: Tino.Bos

  Hmm, I would say that its dysfunction of the keyboard.
  You can use the Num Lock button using an external USB keyboard?

• Impossible to get Samsung SSD EVO to work on the Satellite L50-A0424

  I tried these last days to set up an EVO Samsung 500 GB SDD on my laptop, a Toshiba L50-A0424 and I can only call an exercise in frustration. First of all, the Samsung comes packed with a SATA cable USB cloning of the original hard drive is a pain. After cloning, the next problem is the Toshiba to accept DSS. Make me 2 errors: if I change the boot mode in the UEFI I get an error "check media prescence.

  If I change to the CSM, I get a PXE - MOF - exit Intel PXE ROM. am using the latest version of the BIOS, ver 1.9. It is; s been proposals to downgrade the BIOS to ver 1.2 but when even did not do this. Any ideas on what I can do? Feeling puzzled and irritated and really regret my decision to buy a Toshiba

  Sorry, but I must ask you this question: is recognized by the BIOS of SSD?
  Have you tried to install original recovery image on it?

  I ask this question because I use Samsung SSD on my laptop older satellite and it works without any problem.

• Impossible to get 64-bit Vista to work with the software

  Should go back to XP or trust windows 7?

  We cannot advise you what operating system to use as your software may not be Compatible with it or the other.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  32-bit and 64-bit Windows: frequently asked questions

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Impossible to get a Multicam sequence of work since the update

  I have updates for Premiere Pro. Last mo nth I started a project with three different angles and was able to create and edit successfully the project without problem. Shot different project, same three cameras, same files and I can't do the sequence multicam sync anything. I tried all three views, any combination of the three, export to different type of files, nothing works.

  What gives?

  Any help would be appreciated. As with anyone else, I know, I have a deadline for this project.

  Thank you

  Running Windows 7 64-bit OS

  16 GB of ram

  I guess I'm not as crazy as I thought! Seems that I created the problem on my own. A sequence has two tracks, one I couldn't see not in view, and it was not sync'd up with each other. Once, I removed and made the multicam went right away and am at Midway through a ceremony of marriage to edition!

• How to get movies to play in 3D on the Qosmio F750-03W

  Hello

  I have a little problem in getting to play 3-d movies.
  Even after I read the manual im not entirely sure how to operate. any tips?

  What I have to buy 3D movies to make it work?

  Can you first tell us what model of laptop Qosmio do you have exactly?

• How can I get a dynamic mic to work on the iMac?

  How can I get a dynamic microphone to work via the usb input? Do I need a plug-in?

  Well Yes, if it is a USB microphone, the support is to plug.  Note, Apple provides an Audio configuration and Apple Midi utility in Applications-> utilities that once connected develops on the parameters in the menu-> Preferences-> sound-> entry

  Some microphones require Mac OS X drivers.  It would therefore be important to determine if yours is a.   Google your brand and model micro with Mac OS X and the drivers of Word to see if someone needs.

• Satellite U500-176: Impossible to get an HDMI output to work on television or monitor

  Hello

  I have a new Satellite U500-176 but impossible to get the HDMI to work on a TV or monitor.

  Usually, when the monitor is connected and I press Fn + F5 I get only the 1 option (LCD).
  Occasionally, the HDMI options work but when I select one it goes to the screen and runs successfully for a few seconds then automatically returns.

  Any ideas?

  See you soon,.
  Roy.

  Hello

  Hmm, what operating system are you using?
  Was - this operating system preinstalled by Toshiba?

  Please take a look in the BIOS. There should be HDMI settings. Please check if it is enabled.
  In addition, I would recommend checking the graphics card driver update.

  What version of BIOS you are using the most recent?

• Qosmio G40 XP MCE - impossible to get an IR receiver to work.

  Hello.

  I have a G40 with XP MCE, but I can't get an IR receiver to work. I would like to use the remote control. You know which driver to use to make this work?

  Thank you

  I think its called the pilot consumer infrared (CIR).

• RV180 router: impossible to get Inter-VLAN routing to work.

  I've been hit in this now for two days and just can't get Inter-VLAN routing to work on this router.

  Here is the place is:.

  Updated to the latest firmware of Cisco (1.0.1.9).
  From default settings, I added 2 VLAN as follows:

  VLAN (id = 1) default: dhcpmode = port IP=192.168.1.1/24 from server 1
  VLAN vlan2 (id = 2): dhcpmode = port IP=192.168.2.1/24 from Server 2
  VLAN vlan3 (id = 3): dhcpmode = port IP=192.168.3.1/24 Server 3

  (without link)
  WAN port
  |
  Routing/NAT
  |
  --------------------------------------
  VLAN ip 192.168.1.1 192.168.2.1 192.168.3.1
  name of VLAN by default vlan2, vlan3
  VLAN id ID = 1 ID = 2 ID = 3
  Inter-VLAN only routing Yes Yes
  Excluded excluded unidentified 1 port
  2 excluded excluded Untagged port
  Port 3 unmarked excluded except
  Port 4 (not interest) without excluded tag excluded
  ---------      --------     --------
  1 2 3 Port port
  |              |            |
  AdminPC PC3 PC2
  192.168.2.191 192.168.3.181

  PC2 is assigned an IP address of 192.168.2.191 (DGW = 192.168.2.1) - OK
  PC3 is assigned an IP address of 192.168.3.181 (DGW = 192.168.3.1) - OK

  (IP 192.168.2.191) PC2 can ping 192.168.2.1 and 192.168.3.1 - OK
  (IP 192.168.3.181) PC3 can ping 192.168.3.1 and 192.168.2.1 - OK

  BUT...
  PC2 cannot ping PC3 - don't DO NOT WORK
  PC3 can not ping PC2 - don't DO NOT WORK

  (does not work in gateway and router Mode)

  CAN SOMEONE HELP ME UNDERSTAND WHY?

  Your help is very appreciated.

  I bought this unit specifically because she supported routing inter - VLAN!

  Vlaminck

  ---------------------------------------------------------------------------

  Support information:

  Screenshots:
  Belonging to a VLAN:
  VLAN ID Description Inter VLAN device Port 1 Port 2 Port 3 Port 4
  Routing Mgment
  1 default disabled enabled unmarked excluded excluded unlabeled
  2 active active VLAN2 excluded unmarked excluded excluded
  Unmarked 3 VLAN3 active active excluded excluded excluded

  Several subnets VLAN:
  VLAN ID IP address Subnet Mask DHCP DNS Proxy Mode status
  1 192.168.1.1 255.255.255.0 DHCP Server enabled
  2 192.168.2.1 255.255.255.0 DHCP Server enabled
  3 192.168.3.1 255.255.255.0 DHCP Server enabled

  Routing table (Bridge Mode)

  Destination Gateway Genmask Metric Ref use Interface Type flags
  127.0.0.1 127.0.0.1 255.255.255.255 1 0 0 static lo upward, gateway, host
  192.168.3.0 0.0.0.0 255.255.255.0 0 0 0 dynamic bdg3 to the TOP
  192.168.2.0 0.0.0.0 255.255.255.0 0 0 0 dynamic bdg2 upward
  192.168.1.0 0.0.0.0 255.255.255.0 0 0 0 static bdg1 to the TOP
  192.168.1.0 192.168.1.1 255.255.255.0 1 0 0 static bdg1 upward, gateway
  127.0.0.0 0.0.0.0 255.0.0.0 0 0 0 lo dynamic

  Routing table (router Mode)

  (Ditto)

  Hello

  It's not because the pings are allowed on the same subnet that they come from a different subnet.

  You probably have a firewall problem windows software because that by default, it removes a different subnet icmp echoes.

  Concerning

  Alain

  Remember messages useful rate.

• Impossible to get files MP4 video to work it is to say 10/11

  Here's my project file:

  Dropbox - videotest.cptx

  It consists of 1 slide with a test inside video and 1 blank slide - that's all!

  
  

  I use 8 Captivate (same results in 9 Captivate) and no matter what I do, in a trial through SCORM cloud, IE 10/11 everything simply do not load video content at all. It just shows the superposition of loading, then it goes, and then it returns - just cycles forever.

  I use the fix IE 9 and which seems to be working (start the video apres.5 seconds instead of the right at the beginning of the slide), but it does help to get the course work in IE 10/11 in anyway.

  I tested all imaginable MP4 H.264 file variations with no luck. Here are a few others that I have gone through:

  http://download.wavetlan.com/SVV/media/http/http-MP4.htm

  Hello

  Thank you for reporting the issue. I am part of the Adobe engineering team. We tried to reproduce your problem but were unable to. For your reference I share the link of scorm cloud that you can follow to see your project you can open preferences in Internet Explore 10/11 Cloud of SCORM.

  Please do not hesitate to share if your problem persists.

  Thank you

  Aditya Tiwari

• Impossible to get a select statement to work

  Hi guys, I tried to get this select statement to work. But it won't be fair
  
  SELECT THE "GEN".
  WHEN'M ' THEN 'MALE '.
  WHEN 'F' THEN 'WOMAN '.
  END OTHER 'UNKNOWN '.
  THE EMPLOYEE
  
  That run, however, I just get unknown ranks.
  
  Summer racking me my brains on this simple thing for a half hour :(
  
  Thanks :)

  HC wrote:

  Otherwise, if I have not ' around GEN, then it says it's an invalid identifier.

  Who says table used has no column named gen. You use SQL * more? If so, publication:

  employee of ESCR

  This will give you a list of columns in the table. Make sure that gen is one of the columns.

  SY.

• Impossible to get my custom image to work somehow

  OK, I read that to define a custom image for an air application file you must change the application xml file. I did that like so: -.

  <!-the icon, the system uses for the application. At least a resolution,

  Specify the path of a PNG file that is included in the AIR package. As an option. ->

  <!-< icon >

  < image16x16 > coolvicon.png < / image16x16 >

  < image32x32 > coolvicon.png < / image32x32 >

  < image48x48 > coolvicon.png < / image48x48 >

  < image128x128 > coolvicon.png < / image128x128 >

  < / icon >-->

  And when I do a bin of the app release is just the small air icon of the box cardboard instead my icon yet I put the coolvicon.png in the src folder. Y at - it another way to do this or I do something wrong?

  Hello

  You must declare/embed your image

  [Embed ("myicon.png")] [Bindable] public var myicon: Class;

  in the header to declare

  http://ns.Adobe.com/MXML/2009.

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx".

  titleIcon = "{myicon}" ><=== i="" think="" you="" have="" to="" bind="" it="" if="" it="" doesn't="" work="" remove="" the="" {}="">
  David.