NVIDIA 315 m is no longer detected by Photoshop CC

Similar Questions

• Thunderbolt display is no longer detected

  I have a late 2013, MacBook Pro and a 27 inch Thunderbolt display, bought in September 2014. I use the screen without problems since then. But today the display is no longer detected. I got the MacBook disconnected from the screen, which has been briefly disconnected from the sector. (It was a power outage scheduled as it happens, but I don't see how that makes a difference).

  Now, when I connect display of the power of the lead part works fine but the screen does not illuminate. To the search, in the report of the system, the Thunderbolt Bus shows two Ports both with "no device connected". I have a Thunderbolt ethernet adapter and shows.

  I tried all the usual troubleshooting steps: disconnected power for a few minutes, resetting the NVRAM, reset SMC. A ran Diagnostics from Apple on the MacBook - all very good. I don't know what I can do. The Thunderbolt connector is slightly warm to the touch, which I think is always the case.

  Everyone you have other ideas please?

  Hey donnysp,

  If I understand correctly, the external display Thunderbolt is not recognized by MacBook Pro.  Looks like you already have a troubleshooting. I recommend you to read this article, it may be able to help solve the problem.
  
  

  Check the connections on your Mac and external screens:

  • If you use an Apple laptop computer, try to connect the AC adapter.
  • Make sure that the power cable from the external display is connected correctly and that your display is enabled.
  • If you are using a Mac Pro (end of 2013), make sure that your screens are plugged into the right ports.
  • If you use a hub of display, Cabinet or "KVM", try to connect the video cable from your screen directly to your Mac instead.
  • Unplug the video cable where it plugs into your Mac, then reconnect to reinsert the connection.
  • If you are using a video card, unplug the video adapter on your Mac, then reconnect to reinsert the connection.
  • If you use multiple video cards to connect your screen (the cards are "chained"), testing connection of the screen by using a single adapter if possible. Some video cards may not be linked together. For example, a mini DisplayPort to DVI adapter may not be connected to an adapter DVI to HDMI.
  • If your screen has more than one video connection, see if you are using another connection on the display works. If possible, check if you use a different view or a different adapter works.
  • Try using another cable that you know to be in working condition. Check with the manufacturer of the screen to make sure that you use the cable they recommend.

  Get help with graphical problems on external displays connected to your Mac.

  Thank you for using communities of Apple Support. Have a good.

• Satellite L300-110 USB external hard drive is no longer detected

  I used my external hard drive via a USB connection for a while normally, I wanted to remove most of his files and only keep my important files. After I restarted my laptop it now is no longer detected

  My external hard drive model is HTS54101 0G9SA00
  Connected via a storage drive HARD Portable USB 2.0 Phillips

  The USB ports are ok, I plugged a USB optical mouse through them and it works, and sometimes the LED on the Phillips turns red with still no detection of my laptop.

  Please advise, I lost my mobile hard disk of 100 gega?

  Sounds like the hard drive has failed.

  The only thing I can think that you can try is to update your Chipset drivers. I don't know if this will fix the problem even if, as you have pointed out that the machine can detect other USB devices already.

• After KitKat updated for HP Slate6 SD card is no longer detected by my programms

  Hello

  I was also forced to update my tab HP Slate 6 voice yesterday.

  After the complete procedure and restarting, my program is no longer detect the SD card!

  HP file manager said: "If von Lavaggio im Android OS kann der HP File Manager nicht mehr auf external applied schreiben" ("due to changes in the Android operating system, HP file Manager can no longer write to devices external storae").

  Please help solve the problem, my programs need to use external storage.

  I tried the following: I uninstalled one of my programs and reinstalled again, but the program still does not detect the SD card.

  I can't play music or listen to audiobooks more (via MortPlayer), cannot navigate with local stored map (via CoPilot - poor gps also).

  plS helP!

  Hey Slate6user,

  Here are the downloads of image for your Tablet: HP Slate 6 6000en VoiceTab drivers.

  As you can see there are a few different downloads. They vary by region in order to ensure that you select the correct version depending on the location, in that the tablet was bought.

  Restoration of good luck!

• Is the case of NVIDIA QUADRO 2200 to work with Illustrator, Indesign, Photoshop...?

  Is the case of NVIDIA QUADRO 2200 to work with Illustrator, Indesign, Photoshop...?

  My computer is Windows 7 x 64

  Thank you!

  Hello

  Please refer to the system requirements | Adobe Creative Cloud

  Concerning

  Kuldeep Kandpal

• Try to download the trial and the system says "you are using an operating system that is no longer compatible with Photoshop. See system requirements for a complete list of the supported platforms. What can I do?

  Hi, I am looking to download the trial and the system says "you are using an operating system that is no longer compatible with Photoshop. See system requirements for a complete list of the supported platforms. What can I do?

  My laptop is a MAC Pro

  Well, what IS your version of operating system?

  MINIMUM requirements for programs of cloud... scroll down and check each program

  -http://helpx.adobe.com/creative-cloud/system-requirements.html

• I got the message that I am running one operating system is no longer supported by Photoshop?

  Hello.

  I am trying to download the trial of 30 days for Photoshop and Illustrator and I get the message that I am running one operating system is no longer supported by Photoshop. Go to system requirements (or something like that because it's in Danish and you will see a list of all the supported platforms.)

  How do I do that?

  Thank you very much!

  Hello

  Please see system requirements | Photoshop

  Hope that helps!

  Kind regards

  Sheena

• I just started to have "Failed to load actuions because an unexpected end of file has been detected" in Photoshop CC

  I just started to have "Failed to load actions because an unexpected end of file has been detected" in Photoshop CC. It was working fine yesterday, but when I opened this evening warning came.

  Looks like the *.atn file is possibly corrupted.

• Y580 GTX 660 M is no longer detected?

  Hey guys. I use my Y580 for a little over a year now, and I absolutely loved it. Recently however, my graphics card has completely dissappeared. This happened after playing an hour or two of Titanfall (which worked really well) and try to update my nvidia drivers. I wasn't able to update the installation by using the two Geforce experience and manually. By downloading the manually, I noticed that their site was not able to detect my graphics card. Then I checked the Device Manager and all I could see was the Intel card. Later, the Nvidia Control Panel was also unable to detect the card.

  I decided to uninstall all my drivers and start again with that on the Lenovo driver page. I managed to successfully download the driver and it made 660 appear in Device Manager. This does not solve my troubles because when I tried to play a game, the 660 disappeared again. I then looked in the BIOS and I was also unable to find the card. Frustrated, I did a system restore before all first, I downloaded the driver. Once more, the 660 M briefly appeared again but disappeared when I tried to play or to update.

  I was just wondering if it is a hardware or software problem? Is there anyway that I can fix it without sending it in for repairs (I don't know if I'm still under warranty more)?

  Thank you

  Well Yes, it's your GPU. I saw many problems of people with this GPU, including me. From my experience, that means it is dying and there is not much you can do. In my case, it always works when I do it the way I described, but I decided to give up. I disabled the Nvidia GPU in the BIOS and I'm going to buy a desktop computer

• Wireless adapter is no longer detected?

  Well, my girlfriend has dropped my really heavy DVD player on my USB wireless adapter, which was plugged in advance... adapter came out well, but the ports... not so much. So we had to move to the rear ports. We could always connect to the internet, no problem. Then the problems started. We would connect to a maximum of 10 minutes to an hour while that between the duty to repair our wireless connection. Then he stopped to pick up our networks. Now the wireless itself has disappeared.
  The card is not detected any longer, but it works fine connected to another PC. I tried reinstalling the drivers, nothing works. I tried EVERYTHING nothing helped. Someone, anyone please help me solve this problem!

  It is more of a hardware issue of a Windows problem.  The USB connector could have been damaged such that the power PIN is shorted on a spit of land somewhere.  Try to open the housing of your computer and follow the cables to the back of your damaged USB connector where it plugs into the motherboard and disconnect the connector from the motherboard.  With luck, that could take care of it.

  HTH,
  JW

• 571 aspire V3 - G Nvidia GT 630 M no longer works

  Hi I have an acer Aspire V3 - 571G and I wanted to install a new update for the nvidia driver, but he says this graphics driver could not find compatible graphics hardware and now my 630 M 2 GB no longer works and I have windows 7 64-bit on it as a default.
  can someone tell me what to do please?

  He worked at the last and his very funny for the nvidia card, I should update my card intel and then the nvidia will work correctly once again, disappointing

• Gamepad is no longer detected.

  I have been using a joystick Microsoft Sidewinder game since I have Vista and before with no problems. When I return my computer to the repair shop for a long time, all of a sudden, it can't detect the joystick. Is there a reason for this? Repairs were simply a new graphics card, and the joystick works great until I sent him. As for the CD, it could come with it initially years, but I never saw, even if the CD has been lost for a long time until I upgraded to the new computer/Vista, once again, with no problems at all. I just don't understand why all of a sudden, he's not detect even anything in when it detects USB devices being connected.

  Hi NickMorris

   

  1. do you get errors for the device in Device Manager?

  2. have you tried to connect the gamepad to a different USB port or another computer?

  You can check if you can provide us with the error message for the device from the Device Manager. Please refer to the below steps.
  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b b.. in Device Manager, look for the device and then right click on the name of the device and go to properties.
  c. now on the general tab, check the status of the device. Let us know the status of the device. Also you can inform an error code with the State.

  , You can check if you are able to update the drivers through the Device Manager. There is alsoUO can refer to the link below and check if you get an update of the driver. You can install driver found under optional updatesupdates.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps.

• nVidia Geforce GT 650 M NOT DETECTED on Inspiron 17R SE 7720 after update BIOS A11

  Hello world

  A week ago I did some updates on my Inspiron 17R SE 7720 including Bios Update to the version of the A11. Unfortunately, after this update I realized that the nVidia Geforce GT 650 M graphics card had disappeared from my system.

  I read other posts and people who have experienced this problem suggested the re-installation of the bios would solve the problem, but in my case, it didn't.

  Also, I installed the new version BIOS A12 and A13 versions but non of these have solved this problem.

  Also reinstalled windows do not either fix as suggested by others in other posts.

  I also ran the diagnostics on the computer from the bios and card does not appear there either, like the nVidia Geforce GT 650 M graphics card has not been installed on the system.

  Finally I run a version of Ubuntu on my Inspiron 17R SE 7720 and run a system check and or the card is detected, just the Intel HD Graphics 4000 is detected under windows or linux.

  Please someone Dell help us solve this problem, because it certainly is a BIOS PROBLEM.

  If you're among the unlucky ones like me this saw has disappeared from the map of nVidia Geforce GT 650 M graphics card in your system, please share your experience with me.

  Thanks for your replies.

  

  -edition 22/10/2013 by me (luiavag).

  After that 7 exact months of supplition I started this discussion Dell finally did.

  A16 BIOS solve and fix this isue.

  Link to official Inspiron 7720 system BIOS A16:

  http://www.Dell.com/support/drivers/UK/en/ukbsdt1/DriverDetails/product/Inspiron-17R-se-7720?driverId=FJY72&osCode=W864&FILEID=3290558924&LanguageCode=en&CategoryID=bi

  Finally, we return to the game!

  Laughing out loud

  I found the direct download to A16 BiOS.

  http://downloads.Dell.com/FOLDER01731977M/1/7720A16.exe

  It was not there yesterday.

  http://downloads.Dell.com/published/pages/Inspiron-17R-se-7720.html

  hope this helps someone

  report on this thread if all goes well.

• Music/video Windows 8 app is no longer detect content iTunes after an update of nonsense

  Hello

  Using Windows 8 since I got my first gen Surface Pro 128 GB. Due to the low built-in storage available (I went from a 500 GB SSHD to a 128 GB SSD), I decided to get a 64 GB MicroSD card and transfer my library downloads, music and videos on it. At first, it doesn't seem to work as Windows Media Player was not recognizing the MicroSD card correctly contents. That was solved by creating a mount point for my MicroSD to the root of my C: drive and settle the island and video libraries.
  Everything worked as expected in Windows media player and the underground music and video apps. Then, after some unknown update (there were several Windows and subway applications between when the time I used the metro apps), I was no longer able to use apps metro play my iTunes audio/video AND no content were applications detecting music/videos that were not in my iTunes library. WTF has Microsoft done again?
   
  Maybe I need to put modern apps as my default player for them to detect my content? Because it is similar to the beast move that Microsoft made to force users to keep that as their default browser (which does not affect me much); to use the metro to know version, you must set it as your default browser.

  Hello

  Have you tried to create a VHD/XVHD on the MicroSD card and mount this virtual hard disk on your computer? This should solve the problems you should meet about memory 'external' vs local drivespace.

  A complete guide is given here;

  http://www.YouTube.com/watch?v=HEUschJFups

  Let me know whether or not this help :)

• Toshiba 500 GB external HARD drive is no longer detected - after only 1 hour

  Hey,.

  I finally got my Toshiba 500 GB external hard drive delivered today. I had no problem setting up and to turn my laptop on, it immediately recognized and I started to transfer things for her.

  However, I accidentally stood on the USB cable to the HARD drive and disconnected. I plugged it in, but my computer did not recognize.

  Nothing I've tried has worked, always, the laptop does not recognize the hard drive.

  Please help, I've only had the one hour thing, and it already does not work! I really hope that I have not only lost £56...

  All advice is appreciated, thanks in advance.

  NEW: My father just tried plugging the HARD drive in the desktop PC is on the ground, and as soon as the USB when it is in the port, you stop the computer... causing him to lose a lot of important business email, he wrote. It starts the computer, the USB and you stop again... and this has happened 3 times until he gave up. What on Earth is wrong with this thing? I've never heard of a USB cable, stop a computer permanently, or a hard drive that does more after an hour of use...

  Post edited by: Sam_V631

  The USB port on the HARD drive may have been damaged and may be causing the PC detect a short power.

  You can try another USB cable? If it is not the cable, then the HARD drive should be sent to a Service Center for repair or replacement.