NVIDIA 8800 GT graphics card failure

Similar Questions

• Error code 43 (Windows has stopped this device because it has reported problems) on nividia 8800 gt graphics card

  I have a computer with dual nvidia geforce 8800 gt graphics card graphics cards, but I recently started getting the following in my device manager error message: "Windows has stopped this device because it has reported problems. (Code 43) »

  I started getting this message out of the blue after moving from my computer to another room.  I knowingly did not change anything on my PC and have been released for about 2.5 years with no real problems to speak of her.  I tried to uninstall and reinstall the latest driver from nvidia and had no luck.  I don't have access to the nvidia due to the device being disabled control panel.  Also I tried to restore my PC to a previous save point with no luck as well.  A short reading on nvidia forums led me to try a registry scan and repair, but alas it was without result.

  Any advice on what could be the cause of the problem and the best solution would be greatly appreciated.

  Hi rd,.

  You could try to remove one of the cards, then update the driver.

  They should use the same driver and may be coflicting at startup.

  You should also check the power supply if it is a few years old.

  Also make sure it is off enough electricity for the installation of the split card.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• W530 NVIDIA Quadro K5100M graphics card upgrade

  Hello

  Can I upgrade my W530 of NVIDIA Quadro K2000M graphics card NVIDIA Quadro K5100M?

  Thanks in advance.

  eGPU through slot ExpressCard USB isn't.

• Help, audio stop working in XW6600 with nVidia NVS 315 graphics card

  Greetings:

  I just buy a renovated, XW6600 Xeon dual processor, 8 GB of RAM, Windows 7 Professional 64 bit system.  The PC comes with a nVidia NVS 290 graphics card.  Everything works fine and the speaker in the motherboard Jack produces sounds.  However, when I change the NVS 290 with a NVS 315 (it is a HP spare part), the sound stops working.  The speaker in the systray icon has a red circle with an "x" in it.  If I right click on the speaker, the playback device, it shows two TV as icon one above the other with a red arrow pointing down and a description on the righ side saying "Digital Audio (HDMI) high definition Audio Device not connected.   I have the same result in 64-bit Windows 8.1.  The problem is solved if I reinstall the NVS 290.  For both cards, I use the latest driver from nVidia.  Am I missing something?

  Any help to solve this problem is greatly appreciated.

  Hello:

  When you install new video card, it must have a HDMI on it audio chip and what happens, is that the BIOS has disabled the integrated audio system thinking not only have you installed a video card, but you have installed a map audio too.

  Then, go into the BIOS, probably in the Advanced menu, the options menu, you will find onboard audio setting.

  It will be set to Disabled. Set to active, save the setting it by hitting the F10 key and again when you go out (save the settings and exit).

  When you restart, the integrated audio system should be back.

• Adobe Premiere Pro CS6 will work on the Nvidia gts 450 graphics card? Otherwise, what is the alternative?

  Hello everyone, I wanted to know if Adobe Premiere Pro CS6 will work on Nvidia gts 450 graphics card? Otherwise, what is the alternative?

  If your nVidia card at least 1Gig of video ram, use the nVidia Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a 'support for the cards' file - and Mac http://www.vidmuze.com/how-to-enable-gpu-cuda-in-adobe-cs6-for-mac/

• Yet Cs4 breaks down I'm starting a new project and gives me an error message [..-.. \sre\AME Prober.cpp - 258 preset] I chose nvidia 880 M graphics card and I tried to go to the old dr

  I asked a question here before and got a response, so I'm back. Yet Cs4 breaks down I'm starting a new project and gives me an error message [..-.. \sre\AME Prober.cpp - 258 preset] I chose nvidia 880 M graphics card and I tried to go to the older driver

  I couldn't on the forum last night! And today too busy...

  I think that a reinstallation is the only solution for the preset errors prober TEA that has been reported. Activation etc problems can be problems, if you have a subscription to the CC, try all the options to sign out/in on the cloud first Office.

• Qosmio G30 - nVidia graphics card failure

  Hello

  as the title says my graphics card went kaput on Qosmio G30, who is 14 months old.

  I read in some places that could be the problem with the generation of nvidia graphics cards.
  Does anyone have any info on this subject because I have just quoted entre.6 and 1.8 k for what fixed it.
  This graphics card is separate from the motherboard or this prob will result in a new motherboard. If anyone has any info I would be very grateful, thank you, thomas

  PS for some reason that I could not connect with my username (yetchh) original so had to create a new account, have no idea why?

  Post edited by: yetchhh

  Hi Thomas

  That s a pity :(
  Especially the GPU (graphics chip) is attached to the motherboard. He welded s and replacement is not easy.

  There are several Lepidoptera, I called the ASP in my country because I needed some info on replacing the CPU on my old laptop and the guy said that the replacement of the CPU or GPU is not easy and is not possible.

  Well, what to say I think you should contact the authorized service provider in your country for replacement of equipment.

  But I wonder why you come in on costs?
  The laptop is about 14 months. If you have registered your laptop on the Toshiba page, you should get a 2 year warranty which should focus on the laptop.

  So all pieces of equipment should be replaced for free.

• Tecra S2 - another Nvidia Go 6600 graphics card?

  Evening of Goode,

  What else fits in a Tecra S2, except the original Nvidia Tecra S2?

  Furthermore, anyone know the price for a new Go 6600? Is it still available? I can only find it on eBay.

  Thank you very much
  Ben

  Hey Ben,

  I think the graphics card is attached to the motherboard and t can be exchanged or upgraded. If the entire motherboard must be replaced as you can read here:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  And as Akuma written that you can search in the Toshiba page for an ASP.

  Good bye

• XFX Radeon 5770 1GB DDR5 HD Graphics Card failure

  I ordered my birthday gift, a XFX Radeon 5770 1 GB DDR5 HD Graphics Card http://www.hardwarecanucks.com/forum/hardware-canucks-reviews/24204-xfx-radeon-hd-5770-1gb-gddr5-rev...
  This is the second delivery because the first was duff. And if is it, or is it me?

  My computer has only one PCI-EX16 slot and this card is PCI - E2 supposed to be compatible.
  I installed a new PSU of 300w at 650w, and it also provides several plugs which is equipped with a record 75 6pin.

  After the installation, I get a black screen, the card works as I can see the fan turns, but there is no power to one of my monitors, a 22 "and the other is 17"...

  I run a Core2Duo 2.6 E6600 processor and 4 GB of ram, I have 1.7 TB of disk space and all have ample space for the page file etc.

  I have Windows Vista Home Premium and are 32-bit to.

  Here is my Mobo http://support.hp.com/us-en/document/c00864946

  I installed the card as the statement say, I have installed the new drivers, uninstalled the old drivers, I did install more and uninstalling it is incredible, I have no friends to try on their computer and a single PCI-E slot my own so I have only to ask my local shop UKMD all 30quid and 3 days with my computer just wants to get by , as of salt!

  HELLLLP!

  Oh man, I was there yesterday again I don't? I thought, if I could do a GeForce card work why settle for 512 when, for more than 10pounds that I could have a 1 GB?

  I made arrangements for the Radeon graphics card to collect, uninstalled the new card from nVidia, took back and bought this card, the ZOTAC GeForce® GTS 250 Eco 1 GB and has home and nothing, no bloody screen so I thought that there is one last thing, I've never tried before. At the back of my computer there is a small black plaque that says "do not remove" well removed and there is a VGA port, a VGA PORT JEJE!

  I put my old card in > pulled up to my computer > switched to graphic design onbard > turned on my computer (you mind, I have two monitors) so it would not have been successful without two > so I put off, install the new map > powered > installed the card with the work still on board > installed drivers but, error > "there is a problem... blah blah blah is not compatible VGA" HMM

  SO VGA means the edge, so I put off, disable the integrated graphics card and VOILA!

  I'm now a cardholder graphics work STUPID STUPID STUPID!

  If I had done so at the beginning I might be running DDR5 DX11-

  so as a sadist, try this system with the Radeon card? NO.

  I'll leave lol if I had 1 GB card, I would like to here a joy, happy happy joy

  my card Zotec is unbelievable, and after more than 9,000 pages of forums and help, I myself have sorted it

  I write this because it is important to know there are workarounds for the problem impossible, even the most seemingly difficult...

• Help! Nvidia 9500gs power graphics card

  Just bougt garage a Nvidia 9500gt graphics card. My Dell dimension 9100 offers a maximum 360w power supply and the card requires 450w...

  -Should I try it anyway?

  
  

• With the new graphics card failure

  I tried to put a graphics card in my desire to 700-210xt, there graphocs of the motherboard and I need the output HDMI and DVI, which he did not.  I added an ASUS silent 210.  Power on or monitor the work and the computer beeps six times.  Monitor never works, not isolation, or duplicate, even if the computer doesn't seem to not be starting.

  Remove the graphics card returns the system operation.

  Suggestions?

  Hello

  See the HP document on the following link.

  http://support.HP.com/us-en/document/c03653200

  Kind regards

  DP - K

• Windows Xp P & P does not "see" Nvidia 6200 AGP graphics card

  Hello
  I recently installed windows xp on my win2k replacing desktop (enroute to win7), but win Xp does not recognize my graphics from nvidia 6200 agp.
  Under win2k, it installed perfectly to the original, with P P & grateful he and installing correctly.
  He worked happily for some time.

  However, on windows Xp, I had to go back to vga integrated to install xp and P & P does not recognize.

  Starting with card installed, Bios sees it, as you can see the screens of configuration and windows from the screen, but black screen then to the full operating system.
  No failure or vga mode allow also result to the black screen.

  Its a pcchips m810L mb, v71a with sis730s chipset.
  I tried to Flash the bios, cmos, but no change in compensation.

  I think the problem is that the xp (sp2) installation disk is oem and my office is a house build.
  Even if I put the sp3, its still the same.

  It is true that the oem versions will work on this PC manufacturers? It was initially provided with a laptop that is no longer used.

  Thank you

  Turns out to be a flakey bios; used a level between those listed above and it works now.
  P & P arises in life and my agp card has installed fine.
  I can now watch iplayer to my heart's content.

• 'New' Nvidia 900 series graphics cards are compatible with Premiere pro cc?

  I kinda R9 270 in my computer now and who don't cut it no more I am looking for an upgrade.  Maps of the 900 series work? I checked on the adobe site and it didn't say that it supported what anyone on the 780, not even the 780ti.

  Also is there a specific file type that I could convert my gopro clips to in order to get them to change smoothly in 4 k?

  Thanks in advance

  -Travis

  In general, cloud of the body will use 'all' NVidia card with at least 1Gig ram video

  creation http://blogs.adobe.com/premiereprotraining/2011/02/CUDA-Mercury-playback-Engine-and-Adobe--pro.html

  GoPro http://forums.adobe.com/message/4486784

  -low said Mac (Win process must be the same) but GoPro even said to be converted to change

  -http://gopro.com/how-to-prepare-video-files-for-editing-apple-mac/

  -use to convert http://gopro.com/software-app/cineform-studio/

• NVIDIA vs ATI graphics card

  Hallo,

  Y at - it any recommendation for pp CC work? ATI or nvidia?

  In fact, which?

  Thank you!

  Alex

  I agree with Mr. Jim... at least for now.

  nVidia since some versions of Cuda under their belt (CS5).

  ATI is newer to the game.

  Some info:

  Adobe Premiere Pro CS6 / CC Tech specs

  http://www.Adobe.com/products/premiere/tech-specs.html

  Performance optimization: Adobe Premiere Pro and After Effects

  http://blogs.Adobe.com/AfterEffects/2011/02/optimizing-for-performance-Adobe-Premiere-Pro-et-APR in - effects.html

• Not able to MacBook Pro Retina Display nvidia graphics card

  Hello

  Why I'm not able to see nvidia as a graphics card for MacBook Pro with the Retina display.

  MacBook details below. Your help in this regard is highly appreciated.

  Thank you

  gis_abc

  Model: MacBookPro11, 3, MBP112.0138.B15 of BootROM, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, MSC 2.19f12

  Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

  Graphics card: NVIDIA GeForce GT 750 M, NVIDIA GeForce GT 750 M, PCIe, 2048 MB

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 134), Broadcom BCM43xx 1.0 (7.15.166.24.3)

  Bluetooth: Version 4.3.6f3 16238, 3 services, 18 aircraft, 1 incoming serial ports

  Serial ATA Device: APPLE SM0512F, GB 500,28 SSD

  USB device: Memory card reader internal

  USB device: USB OPTICAL MOUSE

  USB device: HUAWEI Mobile

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB device: Apple keyboard / Trackpad

  Bus crush: MacBook Pro, Apple Inc., 17.1

  I do not understand your question.  Is the information that you have posted on your Mac

  Graphics card: NVIDIA GeForce GT 750 M, NVIDIA GeForce GT 750 M, PCIe, 2048 MB

  Have you looked at "System Profiler" or "System information" applications-> utilities?  Under "Graphics/displays" in the left column.

  You can try to play with gfxCardStatus

  <https://gfx.io/>