List of servers SANHQ

Similar Questions

• do not have a server in the list of servers SOA trying to deploy the application

  Hello
  I'm on JDev 11.1.1.6, MDS created in 11.2.0 server.
  Trying to deploy a simple composite test in the application server installed with JDeveloper.
  I see no "SOA servers" in the list.
  Administration server is up and running, is so that managed, Node Manager seems fine, not to use proxy in JDev preferenxes, the connection status of the Application Server is very well put to test.
  I've seen quite a few comments on the same subject, but so far didn't come to those who give a solution that works for my case. Any trusted is welcome.
  
  Thank you
  Anatoliy

  No, it isn't. Sorry, what it has to do with my problem?

  If you have not soa-infra app, then SOA Suite is not installed/configured for your domain name... You need SOA Suite to deploy composites...

  Check this box...
  http://docs.Oracle.com/CD/E23943_01/doc.1111/e13925/configure.htm#CFHCGFHD

  Also take a look at article 3.1.6 extending to a domain in the same document...

  See you soon,.
  Vlad

• How to retrieve a list of servers variable shared

  I need a list of all computers that are currently in service shared Varables (tagsrv.exe?).

  The list that I want is the same as the network shown in the NOR Distributed System Manager.

  Hi Philippe,.

  I think that this area Dev example is what you would like:

  http://decibel.NI.com/content/docs/doc-3861

  Flash

• Change Netbios Computernames to get the list of servers

  Hi all

  I tried to change the name of computer netbios for multiple computers by using a script PowerCLI and came to a bit of trouble.  Basically, I found the IP address of each computer, string split each IP address and then reconstructing the substrings use to rename computers.

  Here is the script that I managed to put together:

  #Getting list of IP addresses
  $a = Get - VM | %{
  foreach ($nic as $_.) Guest.Nics) {}
  Write-output $nic. IPAddress
  }
  }
  # String split IP addresses
  $b = {foreach ($i in $a)
  $i.split(".") Write-output
  }

  New #Creating NetBios Computername of each IP address
  $c = 2
  $d = 3

  $e = while ($c - 10) {}

  « 5 » + $b [$c] + $b [$d] ;
  $c += 4;
  $d = 4;

  }

  #Switch each server of the old name with a new name matching

  foreach ($i in $a) {}

  get-wmiobject win32_computersystem - computername $i |

  foreach-object {$_.} Rename ($e)}
  }

  I was getting an exit that suggests that the script works and the computernames were changed, but when I check the looks that they all remained the same.  I think the script could be ok up to the part where I try to change the old name and the new, and somehow, it is not able to use the array of new names in the for $e do.

  Sorry if my script is messy or just completely wrong.  Any comments would be immensely appreciated and please feel free to add suggestions or questions!

  Thank you very much!

  I missed the fact that $e can contain an array in your script.

  If you cannot pass an array, but you must specify a specific item in the table to the Rename method.

  Try to change the last part of your script as follows

  #Switch each server of the old name with a new name matching

  for ($i = 0; $i - lt $$a.count; $i ++) {}
  get-wmiobject win32_computersystem - computername $a [$i] | foreach-object {$_.} Rename ($e [$i])}
  }

• Cannot get list of castle wolfenstein multiplayer game servers... just reinstalled rematch after recovery and system crash

  Had to do system recovery after a crash... re-installed Return to Castle Wolfenstein and failed to get the list of servers to show all servers even after refresh or get new list... even with or without firewall... even with virus scan turned OFF... even typed in the system to allow for the... Help

  Hello

   
  Return to Castle Wolfenstein, is not compatible with Windows7, here is the link for compatibility:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=return%20To%20Castle%20Wolfensein%20
   
  Method 1:
  Try to run the game in compatibility mode and check if it helps. Check out the following link.
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
   
  Method 2:
  I suggest you uninstall temporary software security temporarily and then check if it helps. Sometimes, turning off or security cannot help. You can see the following link.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not uninstall your antivirus software. If you must temporarily uninstall to install other software, you should re - install it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  You can try to contact the game manufacturer for further assistance.
   
   

  Hope the helps of information. Post back and let us know the results.

   

• Whitelist for the installation of the grey list

  I tried to follow the instructions in the manual of the Apple server to add servers to the white list for not beeing grey listed, but I can't make it work.

  Followed the following steps:

  Add servers known to a whitelist

  When you create a whitelist, you list of servers that are known good servers.

  1. Create a text file:touch host-whitelist.txt
  2. Change the text file:vi host-whitelist.txt
  3. Add the following three lines, replacing the name on the third line with the name of the mail server you want to whitelist:
  4. mail:command = writeSettings
  5. mail:skipReadSettings = yes
  6. mail:configuration:postfix:host_whitelist:_array_index:0 = "goodMailServer"
  7. Load these settings in serveradmin:sudo serveradmin command < host-whitelist.txt

  The host file - whitelist.txt have I put in place since then multiply the servers like this:

  command: mail = writeSettings

  mail: skipReadSettings = yes

  e-mail: configuration: postfix: host_whitelist:_array_index:0 = 'Server1 '.

  e-mail: configuration: postfix: host_whitelist:_array_index:1 = 'Server2 '.

  e-mail: configuration: postfix: host_whitelist:_array_index:2 = 'server' 3

  e-mail: configuration: postfix: host_whitelist:_array_index:3 = 'server' 4

  e-mail: configuration: postfix: host_whitelist:_array_index:4 = 'Server5 '.

  When I execute thesudo serveradmin command < host-whitelist.txt do I get the following error:  command must be of the form 'serveradmin command service:command = command_name'

  Do I did wrong here?

  Certainly, you have an error in your command line entry, or host - whitelist.txt is empty.

• How to remove or clean the server taken out of service/absence list

  In the "Server" application, whenever it is launched, it displays a list of servers that have either been downgraded or does not exist (eg..) (local).

  Is there a way to clean this list?

  

  Quit the application server, and then open the XML file

  ~/Library/preferences/com. Apple.Server.v4.plist

  with a text editor like BBEdit/TextWrangler or with nano in the Terminal. (the file is always named v4 - even if your.app is v5.x)

  In this file, you will find a beginning of area with the key 'recent servers"followed by a table, then a dict for all servers in your list.

  Just remove all the areas of the dict to the servers that you want to remove from your list (including < dict > < / dict >), save the file, launch the.app again and there you go.

  The other alternative is, you just rename or delete the file and start from scratch.

  I hope this helps.

• Change VLAN of a list of virtual machines and then force a reboot.

  I start with a script that I found in this forum - I'm new here and just try to wrap your head around this code... so apologies if this is Basic for all the world

  # VCenter you plug too

  $vcserver = "MyVcenter.somewhere.local".

  SE connect-VIServer $vcserver

  # Loop to make changes to the network card from the list of servers that needs to be changed

  $serverlist = get-Content "C:\Scripts\vlan_Test\vms.txt".

  ForEach ($server in $serverlist)

  {

  $NIC = get-NetworkAdapter - VM $server

  All-NIC - NIC $NIC - NetworkName "1234 MyNewVLan"-confirm: $false ""

  Just add restart to this line?

  }

  Thanks in advance - I wanted to validate the name of vlan first... and if = rename abc def and restart (just in case you are really in the mood to help me )

  Yes, you can add simply restarting the virtual computer after you set the new assignment of network I've included in the script below, and I added the test to check you're going only to change the network adapters that have a VLAN specific already assigned. The script below assumes you want to just restart virtual machines where the assignment of network has been changed. If you want to restart all the virtual machines on the list, no matter if they need to change, and then pass the line of restart-vmguest out of the IF statement. In addition, I would like to add that a reboot is not necessary for this change.

  # VCenter you plug too

  $vcserver = "MyVcenter.somewhere.local".

  SE connect-VIServer $vcserver

  # Loop to make changes to the network card from the list of servers that needs to be changed

  $serverlist = get-Content "C:\Scripts\vlan_Test\vms.txt".

  {ForEach ($server in $serverlist)

  $NIC = get-NetworkAdapter - VM $server

  If ($NIC.NetworkName - like "MyOldVLan" 1233) {}

  All-NIC - NIC $NIC - NetworkName "MyNewVLan 1234" - confirm: $false

  restart-VMGuest - VM $server

  }

  }

• Recover the server vCenter list

  Hello

  I currently have 4 vCenter Server registered 5.5 with my web client.

  Is there an API I can fire in my plugin for a list of all the vCenter servers?

  The list of servers is in the UserSession.serversInfo table.

• Retrieve a list of vCD host VIMServers

  Hello

  I am trying to retrieve a list of servers VIM of a vCD of level host system.

  
  The code I have so far is the following, but I can't get it to work. Any ideas? Thank you

  Return vCloud level host system

  var lstHosts = System.getModule("com.vmware.library.vCloud.Host").getHosts ();

  for (var i = 0; i < lstHosts.length; i ++)

  {

  If (lstHosts [i] .organization is 'system')

  {

  System.log ("vCD Host Name:" + lstHosts [i] .name);

  vCDHost = lstHosts [i];

  }

  }

  Try

  {

  var myVclHost = new VclHost();

  var myVclHostAdmin = new VclHostAdmin();

  var myVclAdminExtension = new VclAdminExtension();

  myVclHost = vCDHost.toUserObject ();

  System.log (myVclHost);

  myVclHostAdmin = myVclHost.toAdminObject ();

  myVclAdminExtension = myVclHostAdmin.toAdminExtensionObject ();

  var vimServers = myVclAdminExtension.getVimServers ();

  for (var j = 0; j < vimServers.length; j ++)

  {

  System.log ("VIM server name:" + vimServers [j] .name);

  }

  }

  catch (err)

  {

  System.Error (Err);

  }

  Try this:

  var lstHosts = System.getModule("com.vmware.library.vCloud.Host").getHosts();
  
  for (var i =0; i < lstHosts.length; i++){
      if (lstHosts[i].organization == "system"){
          System.log("vCD Host Name: " + lstHosts[i].name);
          vCDHost = lstHosts[i];
          var adminHost = vCDHost.toAdminObject();
          var adminExtensionHost = adminHost.toAdminExtensionObject();
          var vimServers = adminExtensionHost.getVimServers();
          for each (vimServer in vimServers){
              System.log("VIM Server: "+vimServer.name);
          }
      }
  }
  

  You had begun well, just not tracking in your initial loop...

• Overview of the data in environmental assessments through different essbase servers

  Hi all

  
  

  We are on 11.1.2.3 of the EMP. In our EAS Prod, I signed up using my ID AD user and added the two (prod one, a dev) essbase servers on the essbase server list. I was able to add two essbase servers successfully. Now, when I spotted the cube in dev data it gives me the error "cannot connect to the olap service. Unable to connect to the Essbase server. "Error: Essbase Error (1051293): connection fails due to invalid credentials". This may not be true because I wouldn't be able to expand the list of servers essbase and drill down to the database in order to preview if the credentials were wrong. Also I am able to see the contours and Calc scripts very well. I am able to get an overview of the data on the cube prod very well.

  Now, the same thing happens when I try to preview data into essbase cube prod from Dev EAS. Which means can't preview data only on the server dev essbase cubes from dev EAS and when I try to get an overview of the data on a cube of prod from Dev EAS I get the same error of invalid login credentials.

  Could someone please help me understand if this is a bug or if this is how they intended to work? Because we have just upgraded to 11.1.1.4 and we managed to get an overview of the data in any essbase server any EAS service, we used.

  No SSL or Single Sign-on, were used. Only Active Directory credentials. It only happens with an AD ID and not a native directory ID. Please suggest on how this can be fixed.

  Thank you

  Ted.

  I logged this with Oracle and here is their answer copy / pasted

  "

  The problem that you have declared in the RS is a desired behavior. This behaviour was observed in the latest versions, only 11.1.2.x.

  In the previous version we can get an overview of the data for any Essbase server added to any console of regional service.

  But environmental form 11.1.2.x this behavior has been changed.

  We checked with the development on this more team early, and according to the development team, this is a behavior of design.

  As dev environment and Prod environment have different registers, the data preview would work if Dev Essbase server added to the Dev EAS only. as the same is valid for the production or test environments.

  Because same problem has been reported earlier, we train support raised a bug with the development team after the issue of reproduction.

  But the development team did not have this accepted as bug that this behavior is by design.

  Later, we changed this bug at a request of enchantment with the development team to change this behavior.

  Bug 14622693 - OVERVIEW OF THE ESSBASE REMOTE FAILURE HOST DATA when it is CONNECTED TO EAS

  If this improvement asked gets approved by the development team, so it would be integrated in the future release him.

  Thank you

  Ted.

• Virtualization of servers of very large files

  Hello world

  As the subjects that I found on this topic are quite old and advanced capabilities of ESX, I create a new.

  We are now virtualize most IS infrastructure, on ESXi servers connected to the SAN storage with Enterprise Plus licenses.

  In the list of servers, we have 5 major plysical Windows file servers, with millions on the files for 2 to 5 terabytes of data according to the server.

  Technically, we could create several large 2 TB vmdk files and use the Disk Manager Windows agregate volumes.

  Backup of all servers is accomplished using Veeam Backup and replication, to quickly perform a full backup and restore of servers (current solution is TSM, and a complete restoration of the largest server is estimated at one week that we use only redundant backups of files).

  However, if it is technically possible, we have not any idea of stability and performance.

  Someone knows the server virtualization?

  Even if VMware support this virtualization, it's a recommended solution?

  You will encounter some limitations to us?

  We have other alternatives to replace physical servers (for example before boxes NAS connected to SAN one allowing the equivalent functionality to windows, such as advertisements and VSS integration for users), but if possible, we would prefer to keep VMware solutions to virtualize servers.

  Thanks for any information on your experience.

  David Druard

  Andrew M says:

  If you really need a volume is greater than 2 TB disks dynamic comments is so in your case, the only solution.

  Don't forget to take the vmdk of LUNS in the same RAID Group (just to not add physical dependence).

  André

  I agree, however, an alternative is to mount points can be used to "Extend" the file system by mounting a file that points to another logic unit number in the file existing within the OS System.

• servers will get removed

  Hello

  sometimes back, we worked on a script to count the number of days remaining for some servers that will are deleted.

  Need to modify the script and therefore your help.

  SE connect-VIServer 10.x.x.x

  $date = get-date

  $daysleft = '5 '.

  $report = @)

  $dateNow = get-date

  $Filename = "C:\tmp\vmlist1.txt".

  1. I tried to get the list of servers on the fly code below but tht does not seem to work. Please help me to rectify the mistake.this will be a simple .txt file *.

  #get - vm | Tri-objet | format-table-property name. out-file-encoding ascii - filepath $Filename

  foreach ($VM in Get-Content, $Filename)

  {

  $dateFrom = (get-VM-name $VM |) Get-Annotation - CustomAttribute "End Date"). Value

  $nrOfDays = $dateFrom.Subtract ($dateNow). TotalDays

  If ($nrOfDays - lt $daysleft)

  {

  If ($nrOfDays - lt '4') {write-host 'days - four'} #O/p shud be displayed on the console as well as in the report. On the other hand, require a loop nested, for example $noofdays - lt 3,2,1 and output to be dispalyed as a result.               

  $report += $VM

  }

  }

  $emailFrom = " " [email protected] " " "

  $emailTo = " " [email protected] " " "

  $subject = «»

  $body = ' servers with or less than $daysleft days left '+': ' + $report | Out-string

  1. Here I need the output of $report in the new line that appears now as - servers with or fewer days of $daysleft left: abc12 abc22 abc23.*
     *

  2. Also if we can establish the report as a table with 2 fields:

  ServerName DaysLeft * abc12 2

  abc23                             3

  $smtpServer = «»

  $smtp = new-object Net.Mail.SmtpClient ($smtpServer)

  $smtp. Send ($emailFrom, $emailTo, $subject $body)

  Disconnect-VIServer-confirm: $false

  Hope that what I've written makes sense

  Thank you

  A

  My mistake, didn't know that "End Date" holds one day in the future.

  I've updated the previous script.

• Remove the server from list view Server Admin

  I'm trying to find out how to remove a server listed in the list of servers in admin mode I added a replica server earlier but blew it distance trying to diagnose a separate problem. This server appears in the list of servers to view within the Administration console even if it no longer exists. How can I remove this? Thank you.

  Here is an article on how to remove replica servers, http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1010153&sliceId=1&docTypeID=DT_KB_1_1&dialogID=87374507&stateId=0 0 103631102.   You will find yourself using the vdmadmin command to remove the server.

  "C:\Program View\Server\bin\vdmadmin.exe VMware s - r s if you have found this device or any other useful post please consider the use of buttons useful/correct for award points.

• List virtual machines and their DNS server settings

  I try to list virtual machines and their primary and secondary DNS server addresses.  Are the cmdlets in vmware that can do this, or would I need to use the invoke-script command.  I have the list of virtual machines and I want to list them all with their DNS server addresses.

  I tried to use the wmi objects such as:

  Win32_networkadapterconfiguration get-wmiobject - computername "servername |

  Select name, DNSServerSearchOrder

  It would give me the specific server name and addresses of dns.

  But I need the list of servernames which I would like to list some and their

  DNSserversearchorder settings (DNS settings)

  I tried to put the servernames list in a text file using

  Get - vm | Export-csv C:\computername.txt - notype

  Then I used the get-content command and the pipe in the get-wmiobject

  command like below:

  $servers = get-Content c:\computername.txt

  ForEach ($server in $servers)

  {get-wmiobject Win32_networkadapterconfiguration - computername $server

  | where {$_.} IPEnabled-fits 'True'} | Select-object

  name, DNSServerSearchOrder

  But when I run this command fails with errors such as a pipe empty

  element is not allowed.  I don't know if the above script has all synatx

  error or what is the best way to get a list of servers and their dns server

  Parameters.

  I know the wmiobject maybe out of this range in these newsgroups but there at - it a script in powershell, vmware or windows powershell to get a list of servername (which are mostly VMS) and their DNS server settings.

  Try the following script to get the DNS search order:

  Get-Content c:\computername.txt | `
  ForEach-Object {
    Get-WMIObject Win32_NetworkAdapterConfiguration -Computername $_ | `
      Where-Object {$_.IPEnabled -match "True"} | `
      Select-Object -property DNSHostName,DNSServerSearchOrder
  }
  

  Best regards, Robert