NVIDIA display error messege.

Similar Questions

• HP NVIDIA Geforce 8400 GS display error

  Had this computer for a year and a half and I played a few but I played games on it all the time.

  Model: m9058n

  When I was playing my game online, the screen messed up and I got the display error a few times but it was random and never threatened any whatsoever, until after he was just blue screen saying that there is a "display driver error."  persistent problem when the logo screen when I start my computer had a few white dots on the screen as the graphics card was messed up, but when I looked at the map he was clean and in good when eventualy began to the high fine but computer froze again, and is the same thing, accept this time I had a corrupted with the file bmdedit.exe file error Finally, I used my recovery discs HP (2) I used to restore and it worked! But unfortunately it has messed up after an hour, but this time I might actually go in safe mode every other time she tells just to do a startup repair but when I tried to get a different driver, he has never worked and it is still stuck like that I use a different computer than theres absolutely no way to get into , I tried to get it back again, but if she the messed up screen it just hard will not work, so I was able to install windows makes worst envy.

  (1) I can't go in safe mode

  (2) I tried recovery disks did not work

  (3) it is impossible to install windows

  (4) all in the computer has been checked several times dobule

  I think it's just the graphics card and just nothing I can do myself cannot be fixed wise software thereon or he does not resemble anything that can be done, but I came to see ideas that I have not tried.

  Anything that can run WoW really well lol, cannot enjoy full-screen or the shadows without losing 24 images

• On the Satellite 2450-201 NVIDIA display driver

  I downloaded and installed the latest nvidia display driver for my laptop that has nvidia gforce 420 GB and I have install the driver was the 36,48 v when I start to the top of the poster are bad and we = hen I connect it says Error loading nview no nvidia hardware not detected on the primary monitor if you are running on nvidia card please make sure that it is configured to be primary. What should I do when I have the access control panel nevidia Office Manger and check the box that the message happens again then I restart and the graphics are fine, but after about 5 boot up it goes back to the graphocs rubish and message appears again.
  what I'll do!

  Hello

  Have you installed the driver for the Toshiba page?
  If so visit the Toshiba driver page and download the driver.
  It s not recommended to use NOT Toshiba graphics cards drivers.

  Then I recommend to check the display properties, if the screen of the laptop has been on the primary monitor. Mark the display with the digit 1 and check the option use this device as the primary monitor has been activated.

  Also, check in the Advanced tab nView option if the nView mode has been upgraded and that make the main display has been enabled for the screen of the laptop.

• HP Officejet Pro 6830: My 6830 Pro Officejet a error Messege "problem with printhead. Through troubleshooting all.

  My HP Officejet Pro 6830 worked normally and then all of a sudden it started giving the error messege "problem with printhead.  It does no more than print all.  It doesn't let me do any troubleshooting procedures.  I use a wireless network on windows 10 64-bit operating system.  My printer is covered by the warranty.  What can I do to fix this?

  You will need to contact HP for the service, they will probably send you a replacement printer.

  From a post of Sunshyn2005, contact technical support HP see the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
   
  File number and phone number are displayed.

• Error messeges on copies

  Each year, it's my job of burning files closed on DVD or USB keys and store them offsite. I get two error messeges on several of the issues an error 1) reads "file names would be long for the destination folder. You can shorten the file name and try again, or try a location with a shorter shorter path. "  The following error 2) "are you sure you want to copy this file without its properties? The JPG file has properties that cannot be copied to the new location. I can't change the files anyway, so how do site copies. It never happened until this year. Help, please.

  Check if the destination is configured as FAT or FAT32. This one has very limited functions of file name and capacity of the property. Beware also the limits on the lengths of total filename, including the path of the directory they are in.

  Other than in circumstances very precise file name and the path is limited to 260 characters. This includes the backslash drive letter, a colon and root so that the end delimiter, so the rest leave 256 characters. The problem is Windows can allow you to create display names that exceed this limit and then the file manipulation tasks fail.

  For example, if you have a directory on a server says D:\MyCompany\Human Resources\Secretaries, who is then shared to a user that their G drive on their PC directory letters is G:\Letters leaving 246 characters for the rest of the path and name and will work at this limit. However, when working on the server itself the file has another 37 characters already used.

• Safari doesn't play videos Netfllix and gives a HDCP compatible display error

  I am able to watch netflix on any other browser. When I try to play anyv netflix videos in Safari it gives the message error "Ah, something went wrong" and HDCP compatible display error...

  Greetings Hawkdive,

  Thank you for using communities Support from Apple!

  I understand that you are not able to play videos from Netflix in Safari on your Mac, so that you can without problem using other browsers. In this case, I recommend reading over and working through the troubleshooting steps suggested in the following Help article Netflix.

  Netflix error S7363-1266-48444350

  Have a great day!

• After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  If you see the lock of Activation screen after update your iOS device, you want to try the following:

  -Restart your iOS device and try to connect again.

  -Visit appleid.apple.com and log in to ensure that your password is correct.  If you change something here, only to change your password.  Try to connect again on the iPhone.

  -Connect on iTunes on a computer and put your Apple ID and password when it prompts you (as it did on your iOS device).

  -ICloud.com check in the settings.  If you see your iOS device listed, remove account (do not erase or hit lost mode). Restart your device and try to reconfigure.

  -These measures should solve most of the problems.  For someone else, you will need to contact Apple (1-800-MY-APPLE or getsupport.apple.com).

  I hope that helps!

• Satellite P105 - cannot install the nVidia display driver

  I tried to complete the download several times for the nVidia Display Driver 9.7.5.4.

  First where installation is not complete citing «that this computer doesn't have the correct material...» ', then the Windows message came and said that "If this configuration is not completely successful click blabla" and I did.
  Now when I run the installation it always stops in the same place. But now it is said that * "Setup cannot be performed because this driver only works on Windows Vista, and is not Windows Vista. But the thing is I have Windows Vista! *

  Current display driver: Mobile Intel (r) Express ChipSet Family 945GM

  Laptop model: Satellite P105-S6177

  Operating system: Windows Vista 32-bit

  Hello

  > Current display driver: Mobile Intel (r) Express ChipSet Family 945GM
  And then you want to install a nVidia display driver?
  LOL :D

  I think that you can not install a nVidia display driver because your laptop is equipped with an Intel chipset and graphics card.
  You will never be able to install nVidia display driver and thus make the message that you do not have the correct material.

  Intel and nVidia graphics cards graphics cards are different things, so don't mix do not!
  Some P105 was equipped with nVidia cards and others with Intel card and it seems that you have an Intel card.

• Satellite 2450-201: nVidia display driver

  I just downloaded the latest driver from nvidia display for satellite 2450-201 of toshiba and now the screen went worse the driver is 3.6.4.8. for nvidia gforce 420 go what I'll do I tried to roll back, it won't let me! and I have not a system restore point nor is there some settings using nvidia!

  Hello

  I checked for your device and Toshiba download page, there is only one display pilot available (v 36,48). Can you please tell us what version number has this driver and where exactly did you find?

  Try to uninstall it from the Device Manager, restart the device and install version 36,48.

• Vista on Portege M200 - some problems with nVidia display driver

  Hello

  I recently decided to update and perform a clean installation of Windows Vista on my Portege M200, now that Toshiba have released official drivers for this machine.

  Everything works fine, EXCEPT the nVidia display driver. I have the following questions with the driver Toshiba provides for this machine (97.52 version):

  (1) when the screen turns off to save power, the backlight does NOT turn off. Screen turns off but the backlight will stay lit.
  (2) for the recovery of the standby mode, the backlight is OFF. You must use the shortcuts Fn-F6/F7 to change the backlight level manually, that will bring him back.
  (3) external monitor does not work (with command Fn + F5 or nVidia control panel). External display is always blank.
  (3) video playback in WMP is very chopped (a secondary concern for me).

  Is there a chance that Toshiba could finally get a updated driver that would set out the? That would really make this machine fully functional in Vista.

  Thanks in advance for any help or information.

  Null value

  Hello

  > Are there opportunities that Toshiba could finally get out an updated driver?
  I noticed that from time to time new updates of pilot (any series of notebook) are released on the European driver Toshiba page and, therefore, I m optimistic that new updates are available

  But note; usually, various problems can be resolved by installing some patches MS Vista and missing patches.
  Then visit this [MS update website | http://www.update.microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us] and check if all the patches are installed.

  Best regards

• Re: Satellite P500-12F - cannot install the new nVidia display driver

  Good evening

  I'm sorry for stupid question, but I don't know what to do. I have the Satellite P500-12F.

  I tried to download the new graphics drivers for the NVidia card, I went to the site of NVidia and downloaded a new driver, which dates back to December 2009, instead of mine, which is July 2009, however, when I try to install it, the system indicates that Joana does no hardware that is compatible with the new driver.

  Could you tell me, what am I doing wrong? I could use any guidance as well. Thank you very much!

  Hello

  Why you try to use the nVidia display driver? These drivers are not pre-tested on the laptop and installation is at your own risk! In the worst case, you could destroy the graphics chip.

  As Akuma written already using the latest drivers Toshiba because they are pre-tested.

  Why you want to update the display driver? You are not satisfied?
  Remember: never change a running system! ;)

• I m unable to turn on windows Defender. It displays error 0 * 800106ba. I m using microsoft security databases since then I m having this problem

  I m unable to turn on windows Defender. It displays error 0 * 800106ba. I m using microsoft security databases since then I m having this problem

  Hello

  Are you running MSE or other antivirus/security programs stop Windows Defender running?
  Whether Windows Defender is blocked from running by them. McAfee, AVG and many others to do this.
  MSE includes features of Windows Defender inside run that separately it would be redundant.

  ------------------------------------------------

  Troubleshooting of Windows Defender
  http://support.Microsoft.com/kb/555957

  "%ProgramFiles%\Windows Defender\MsAsCui.exe" is the folder of the default Defender

  Start - type in the search box-> Windows Defender - find top - make a right click on it.
  RUN AS ADMIN

  If no joy using Start - computer or Windows Explorer to access this folder and create a
  Shortcut to put on the desktop and the Start Menu. You can also right click on a shortcut this and
  see if they point to here.

  Goal
  "%ProgramFiles%\Windows Defender\MsAsCui.exe".

  Start in
  "%ProgramFiles%\Windows defender.

  How to enable or disable the Windows Defender
  http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

  --------------------------------------

  Maybe something here if necessary:

  What is display / causing the error message? Some anitvirus/security/antispyware products can
  cause this error. On those who use you, including those that your never had even those
  uninstalled (the remnants can cause problems). McAfee is just an example of what many can do.

  Start - type in the search box - Services - find top - Right Click - Run as Admin

  Windows Defender - value STARTED and AUTOMATIC

  or set MANUAL and STOPPED if necessary

  Fix for the problem of 800106ba.
  http://support.Microsoft.com/kb/931849

  Error (an example) of McAfee report.
  http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch

  Check also:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Marketing, Windows XP displays "error loading msinuc32.dll specified module could not be found.

  While starting up, Windows XP displays "Error loading msinuc32.dll specified module could not be found" help me solve

  Hi Rahmansherif,

  ·         Did you do changes on the computer before the show?

  Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

• Windows cannot upgrade display error 8007010b

  my computer will not any update of windows and displays error 8007010b

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

• I keep getting invited to windows update (vista): security for PowerPoint Viewer 2003 (KB969615) update installs not and displays "error code 4397."

  Security for PowerPoint Viewer 2003 (KB969615) update installs not and displays "error code 4397."

  Please help with installation. After a short period of time, I get a message that there is a problem and it will stop

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all