Spooler Subsystem App has encountered a problem and needs to close

Similar Questions

• Spooler SubSystem App has encountered a problem and needs to close. We are sorry for the inconvenience.

  Spooler SubSystem App has encountered a problem and needs to close.  We are sorry for the inconvenience.

  Hello

  1. When you get this error message?

  2. that you get this error message when printing?

  3. What is the brand and model of the printer?

  4. don't you make changes to the computer before the show?

  Please provide us with more information on this issue to help you best.

  If you get this error when printing, follow the steps from the link below.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/810894

• Printing error: "Spooler subsystem APP has encountered a problem and needs to close."

  Original title: cannot print to the network printer.__I have a net wifi Windows XP, SP 3 and an IBM laptop.

  Printers seem to be installed (XP has the printer connected via USB) but when I try to print from IBM I get an error as follows:

  "Subsystem spooler APP has encountered a problem and needs to close."

  The printer is a HP Deskjet D2660 and the LAN is configured correctly by using the wizard.

  I also discovered that the print spooler is never started.

  In addition, even when I start the spooler it remains not said during the next time I start up.

  Can anyone help? I've been banging my head for two weeks.

  Salvation;

  Thanks for responding.

  My IBM ThinkPad running XP - Pro

  My computer is a DELL and running XP-Home Edition

  Printer installed on DELL

  I have a WIRELESS LAN installed by the installation wizard. The net works fine except for the printer.

  Every time I start the spooler does not work. If I set the spooler of runing the choice is never registered. the next time I start up, the spooler does not work.

  I finally asked some experts to solve the problem of no access to the network printer. It took them more than 4 hours (for a cost) to make it work. Everything was going well until the next day. The problem is back. My thought is that the register should be updated so it will retain the corrtions.

  I downloaded the MATS_RUN.printing.exe utility. It corrects everything except this message on the Spooler subsystem.

  Any advice you can give me would be greatly appreciated.

• Spooler subsystem app has encountersd a problem and needs close__

  Spooler subsystem has encountered a problem and needs to close

  Spooler subsystem has encountered a problem and needs to close

  See http://support.microsoft.com/kb/324757

• Spooler subsystem app has encountered a problem.

  HP Laserjet 1020 printer does not work.  Have used this printer for years.  Last print job has stopped the printing process and give the spooler subsystem app has encountered a problem error message.

  Used Mr. Fixit.   Have the print spooler service manually restarted and the RPC service. When I try to print, Spooler Subsystem App Error message appears and printer spooler stops,

  OS is XP Home Edition Service Pack 3.

  Cannot remove hardware HP Laserjet 1020 and reload HP Laserjet 1020 download did not fix problem.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Use of the special procedure for printers Lexmark described below and follow in its first Article.  If still no joy, use the alternative method that is linked below.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

  A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.

  Open a command prompt window (start > run > cmd > OK)

  Type the following in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS
  output

  Note that there is no space before the =

  If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.

  Alternative to the method of his first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  Use of SuperAntiSpyWare found two serious problems.  Could cross printer of pending work.  Printer works fine.  Thanks for your reply and advice.

  Best regards

• In XP randomly receive error message "Windows Explorer has encountered a problem and needs to close"

  I get the error message "Windows Explorer has encountered a problem and needs to close".
  It occurs at any moment while I'll do something on my computer.
  The signature of the error is,
  App name: explorer.exe
  App version: 6.0.2900.5512
  The mod name: unknown
  Mod Version: 0.0.0.0
  Offset: 4ec683bd

  After the error message appears and I click 'send or do not send', everything on the screen refreshes, & I have to reset some programs.

  I am unable to do a system restore to solve the problem because I have no good restore point before this problem occurs. He began to occur initially in Jan 2011 & I can't go to a restore point of return in 2010.

  Can someone please?

  * original title - I get an error message "Windows Explorer has encountered a problem and needs to close". It's a little different from the others I found the message communautaires.*

  Hi Jaaz76

  
  Method 1:

  You can perform a security analysis and check if there are viruses or malware present. Check out the link below to run the scan and check if this helps-

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Method 2:

  Also I suggest you perform a SFC scan and check. To Perform a Scan SFC -

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow

  b. type the following command and press ENTER:

  sfc/scannow

  c. a message indicating that "the system scan will start. Be patient, because the analysis may take some time

  d. If all files require a SFC replace will replace them. Hopefully though you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/310747

   

  I hope this helps.

• 0XC0000005 error printing "Lexmark Web gateway has encountered a problem and needs to close"

  0xc0000005
  Recent problems with my Lexmark X 7675.  After printing, I get an error message that says:

  Lexmark Web gateway has encountered a problem and needs to close.

  I think it's a problem with the latest Windows updates.  I use XP SP3 and that you have not seen this problem until this last week.

  Find C:\WINDOWS\system32\spool\drivers\w32x86\3\lxdwwbgw.exe and delete or rename it so that it does not work.

  This program sends just the stats of the printer for Lexmark.

• Issue of games - exe has encountered a problem and needs to close

  Hello world

  I was wondering if there was someone out there who could help me.

  I can load a game on my laptop (demanding nothing, just football coach) but when I then open the game when loading I get the following message

  "(whatever_the_game_is).exe has encountered a problem and needs to close." We are sorry for the inconvience.

  Can anyone recommend a way to resolve this?

  Thanks in advance

  Rich

  Hi Rich

  Using original or copy?

• I installed OS 10.10.5 and MS Office 2011 give me an error message "word has encountered a problem and needs to close."

  iMAC 27 "16 GB memory; 2.66 GHz; Hard drive GB 999; running IOS 10.10.5

  Problem arises when you try to use Microsoft Office 2011; Error message "this office (word, excel, ppt) has encountered a problem and needs to close."  This happens because it attempts to open all programs... Word, excel, power point.

  I uninstalled 2011 MSoffice and recharged using my home and student version of disk 14.6.1522; same problem

  You may need to upgrade to MS office 2016. It cannot be supported by Yosemite.

  Hope It helps.

  AppleMan

• HPSF.exe has encountered a problem and needs to close

  using pavilion hp Elite desktop, windows 7 Edition 150ff Home premium, receive a HPSF error message. EXE has encountered a problem and needs to close. I tried to download it again from the HP website, but I get a message saying "your system does not meet the minimum requirments for this update, update has been cancelled. (1602) my computer has a hard disk of 1 terabite with 8 GB of ram and I have very little installed above with the exception of 4 songs and microsoft office and student that I bought and Norton Internet Security.

  Someone can tell me why I get this message and how do I fix the problem, my office is wired but my printer is wireless, I have high speed internet and I have also a HP Envy 700-019 again at Christmas last year, which has a HD 2 terabite with 12 GB of ram and windows 8, desktop computers are 64-bit. Not used at the same time.

  This message means that the HP Support Assistant had a problem.

  I recommend to uninstall the application from the--> utility Control Panel programs & features and then put it back. You can use the charm of the search and the type of programs & features. Click on the above icon to call the utility.

  You can reinstall from the Recovery Manager.  Invoke the charm of the search and type in recovery and click the icon.

  

  Find the Recovery Manager from the list of drivers and applications and put a checkmark in the box to the left and then click install in the lower right corner.

  

• "WMI has encountered a problem and needs to close."

  Windows Server 2003 SP2 (virtual server) get this popup error every few minutes: "WMI has encountered a problem and needs to close."
  In the application log:
  Source: Application error
  Event ID: 1000
  Category: (100)
  Failing application wmiprvse.exe, version 5.2.3790.4455, failed module ntdll.dll, version 5.2.3790.4937, address 0x000415f7 failure.

  Any ideas?

  Hello

  Your question is about Windows Server 2003 SP2. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
  I hope this helps!

• the application has encountered a problem and needs to close

  I build the LV, a request using the tabs, the FPGA dll and DLLs that communicate with devices CAN, GPIB, and PCI.

  The apears program to work properly, but sometimes and I can't see the patern, it crashes with the error "the application has encountered a problem and needs to close...". »

  Sometimes the error apears when I'm trying to exit the program, other times it hangs before that.

  I can't find the error because the program can work well for several hours and then crash or it hangs after 5 minutes of work with it.

  Clues about what goes wrong?

  Kind regards

  Daniel Coelho

  I'm still going through the example, but since the error ocours sporadicaly this could take some time to identify the error.

  I was browsing the code and I was wondering about simple things, like:

  -J' have many local variables, could it be the cause protected by some kind of error?

  -Since I use dll on my code, is there a way to make sure that all DLLs are loaded and unloaded properly?

  My program has a TAB with a simple UI of TestStand and when I change the tabs I close the user interface for teststand. When I use this UI I have load and unload DLLs of same that I use on other tabs, i. e., when you use the UI I load all DLLs that communicate with devices and when I change the tabs I unload all DLLs because on each separate TAB I can control these indicidually devices.

  It's a little hard to explain, but I think I managed

  Is there a grain of truth on my questions? If so, what could I do?

• TCP/IP services has encountered a problem and need to close. Windows Server 2003 R2 SP2

  TCP/IP services has encountered a problem and need to close.

  Windows Server 2003 R2 SP2

  That left me without a network or to the Internet on a PDC named DOMCON.

  Tried so far:

  1. last signed NIC drivers installed (8.0.27.0) to HP NC3120 Fast Ethernet NIC.

  2 netsh int ip reset resetiplog.txt

  reboot, enter the details of the intellectual property, etc... NO JOY!

  This server has been running for years until now.

  I can join the registry and files DOMCON_MpsReports.cab NetworkSubkey.reg section.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Here is the link:http://technet.microsoft.com/en-us/windowsserver/bb512919.aspx

• Cannot install 2 black & white or command conquer games. Error:Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

  The error occurs when I insert the game black & white 2 or command and conquer the first decade and click install on a automotive screens popping up, I am sure that these two errors are almost identical and sure if one is fixed so will the other be.

  The error that says "Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »

  To try to fix it already I found a page here which tells me how to install drivers different installshield, and I installed everything that have been listed. My operating system is Windows Xp home edition

  Hello
  
  Were you able to install these games without any problem before?
  Step 1: Install all updates of windows on your computer and check the number.
  Reference: http://support.microsoft.com/kb/306525 
  
  Step 2: Copy the game on your computer, then check the issue.

  Step 3: Perform the clean boot your computer.

  
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135
  Note: To restore your computer to a Normal startup mode, follow these steps:
  
  1. click on start in the box start the search.
  2. type msconfig and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.
  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Patcher.exe has encountered a problem and needs to close. -Windows xp support center.

  Whenever I try to play a mmorpg called jade dynasty, on the Launcher, an error report appears asking me to send or do not send.

  "Patcher.exe has encountered a problem and needs to close."

  How should I do?

  I already tried to reinstall the game and update my video driver and it does not work.

  Hello

  Welcome to the forum of responses to Windows Vista.

  It's Windows Vista forums. To get the best possible answers to your question, I suggest you to report your query in the XP media center discussion forum.

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.Windows.mediacenter&lang=en&CR=us

  Let us know if that helps.

  Kind regards
  Anthony
  Microsoft technical support, please visit our Microsoft answers feedback Forum and let us know what you think.