o update windows encontrou um erro code 643 unknown

Similar Questions

• Impossible to update windows xp, 0x80440A error code

  I could not update windows xp, 0x80440A error code

  0 x 80240036 and 0x8024400A

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• I try to update and get an error code 643.

  Failed to update code 643 for microsoft .net framework 3.5 service pack 1 and the .net framework 3.5 family update (KB951847) x 64 - I have vista - help advice would be welcome.  I used the tool fixit - no luck.

  First run the difficulty in this article & see if the update will install after doing:

  How to fix MSI software update registration corruption issues
  http://support.Microsoft.com/kb/971187

  If no joy, see...

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643 (23 Oct-09)
  http://support.Microsoft.com/kb/976982

  Then proceed with the following text:

  =====================

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://msdn.Microsoft.com/en-us/KB/kb00318785.aspx

  Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100

  After you run the cleanup tool of .NET Framework (not the Windows Installer Cleanup utility), reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

  =========================

  What to do if other .NET Framework configuration troubleshooting procedures do not help:
  http://blogs.msdn.com/astebner/archive/2008/03/07/8108332.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Updates fail to install (error code 643)

  original title: updates fail to install

  I had 3 updates to download (Security Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2539636);) Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2468871) update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2533523).  None of them will not settle, they start but then I get an error code 643.  I have tried everything that I can think to repair the problem and am running out of ideas. I am currently running Windows Vista. All solutions?  Thank you

  IWAS told that it might be a mistake in a registry key and was appointed to go to; http//go.Mircrosoft.com/?linknid=9737449 and run the fix command it work for me and I WAS ABLE to DOWNLOAD THE UPDATES.

• Update Windows XP 0x8712F638 error code.

  After you install the Windows updates today on my Windows XP pc, restart I get error code 0x8712F638and it seems that the hard drive no longer exists. Nothing seems to work even not the disc to reinstall Windows.

  Desperate. Help, please!

  * original title - updates killed pc - hard drive disappeared. *

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State course: http://aumha.net/viewtopic.php?f=62&t=44636 [1]

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  Wish I had better news for you.  Good luck!

  =====================================
  [1] VERY IMPORTANT!-online Any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) whenever Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (for example,Microsoft Security Essentials - free).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Since the installation of service pack 1 to install pack antivrus on my laptop when I download updates windows I get error codes (80072EE2) and (8024402C) how to fix this?

  Since I installed the service pack 1 of windows on my laptop to install antivirus 2012 pack that I can no longer download updates windows. How can I solve this problem?

  I get error codes 80071EFE.  80072EE2. 80200010.

  Hello

  Perform the steps in the article mentioned below and check if the problem persists.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  Hope this information helps.

• can not update windows, 8024400 has error code

  I can't update windows, get the error message 8024400 a. have tried to repair, but it will not work until I update windows.

  What browser (exact version) you are using. ?

  Harold Horne MVP responded on 24 September 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  UTC/GMT is 01:04 Saturday, October 6, 2012

• Updates Windows 7, to get codes error '646' and 'dt000 '.

  When you try to install the updates, the error code 646 occurs. After the patches recommended and routine brings me to Microsoft with potential charges or here for the real experts. Can anyone help?

  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

  http://support.Microsoft.com/kb/2258121 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Updates Windows installs, has error code 66 & 80070643

  Error code 66 & 80070643 appear when you try to install upgrades to windows 7. Happened since then went from broadband to the Wi - Fi

  * original title - computer will not install the updates of windows. Gives the error code 66A & 80070643. Previously no problem on broadband but since I use wireless connections problem is constant. No windows at all.* payments

  You can see this discussion earlier, linked: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f1dd866f-85b7-4ae6-bc32-1c488c19742a ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My computer will otherwise not updating windows. 80072EE2 error code

  The last update was on 8/14 and since then I can not access the server for updates.  My machine is a Toshiba Satellite L555, CPU Intel Core 2 Duo, 4 GB, 64-bit with Windows Home Premium.  I get error code 80072EE2. I installed Norton Internet Security.
  This problem also exists on two other computers.  One is a Dell Inspiron with Vista which has had the problem for several months and the other is a same Toshiba that is fresh out of the box and has no additional firewall or antivirus protection.  I would be very appeciate any assistance. I tried to disable the firewall and added update sites to trusted sites.

  Hi Rtgf123,

  If Windows Update, error 80072ee2 during updates, the Windows Update servers may experience an unusually high number of requests for updates. Close Windows Update, wait 10 to 15 minutes, and then run Windows Update again. Alternatively, you can wait for automatic update of Windows run at its next scheduled time.

  Visit this link for more information on this error.

  Bindu R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when you try to update Windows 7 64 bit - code error 0x8000FFFF

  Been upgraded Windows 7 very well since the purchase, but in the last few days I've met the above error code. I ran through most of the potential solutions (check the registry keys, checking the services running, disable AV software, rename the folder to download etc.), but nothing seems to help. Currently, I'm stuck with Windows 7 could not update from this point.

  HI -.

  Running "Run the Fix It" in aggressive mode seems to have done the trick. One thing to note - I also disabled Acronis True Image Backup Nonstop, who had run up to this point. If this makes a difference or not, I'm not sure. Whatever it is, the updates seem to work fine now.

  Thank you very much

  It's very interesting as the How to reset the Windows Update components? page specifically mentions that it is not expected for Windows 7 when I visit with my Windows 7 system:

  Advanced System

  This article applies to a different version of Windows than the one you are using. Content of this article is not relevant to you. Visit the Windows 7 Solution Center

  And, applies to , at the bottom of the page, do not include Windows 7.

  I have the feeling that the information on this page is incorrect according to the directives of Windows 7, which is not surprising.
  That said, it seems that Acronis was the culprit that caused the problem to update.

  A Acronis True Image Backup Nonstop running during the previous update was successful?
  MowGreen Services consumer safety update

• Failed to update Windows XP. Error code 0 x 80070003

  I can't download and install updates for windows XP, I get an error code 0 x 80070003.  I tried to manually delete the DataStore folder and linking the Fix M. knowledge base.  It did not work.  Can anyone offer any other suggestions?

  Hello

  1. have you tried the fix in this article?

  2 How long have you been faced with this problem?

  3 did you recent hardware or software changes to your computer before this problem?

  If you receive this error message, follow these steps:

  a. Verify that the following folder exists:

  %SystemDrive%\Documents and Settings\All Users Data\Microsoft\Network\Downloader

  If this folder does not exist, create it.

  b. check that the locations of profile in the registry is accurate. For more information on how to do this, click on the number below to view the article in the Microsoft Knowledge Base:

  214653 (http://support.microsoft.com/kb/214653/) how to set the path of the profile all users

  Reference: http://support.microsoft.com/kb/910337

• Update Windows Vista 0xc8000222 error code

  original title: Vista error 0xc8000222 code

  I just installed a new hard drive and reinstalled vista and sp 1 & 2 but when I try to run the update or install fix powershell I get the 0xc8000222 error code. Any ideas?

  Hi Catherine,

  1. do you receive an error message when you try to install a specific update?

  2. you try to install the Microsoft FixIt utility?

  If yes try to reset the Windows Update components and check if it helps.

  How to reset the Windows Update components?

  You can also consult the following articles and check if it helps.

  You cannot install some programs or updates

  Problems with installing updates

  Hope this information is useful.

• Cannot perform the update Windows with the error code A 8024, 000

  Original title: error code 8024A 000, does that mean?

  I had to do a clean reintall WIndows Vista and when I tried to update, I received error code 8024A 000, does that mean? How can I fix it?

  Hi Anthony,

  1 are you facing this problem with any particular Windows update?

  2. What are the troubleshooting steps you have tried?

  Please follow the links and check with the question:

  Method 1:

  How to reset the Windows Update components? :

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

   

  Method 2:

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:

  http://support.Microsoft.com/kb/2509997

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  I hope this helps.

• my computer does not allow me to update windows, it says error code 80070005, what can I do?

  my computer asks to be updated, but when I try to update it comes back as 80070005 error code, I have windows vista Home premium

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate.  What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. Save the file on your desktop zip and extract the file:
     -Right-click on the file and select extract all...
     -Click Next when prompted for the Destination.

     Therefore, you should see a folder called AccessChk on your desktop.

  3. Open the folder AccessChk

  4. Hold the SHIFT key and right-click in the window.  Select "open here command prompt.

  5. A command prompt window should open a similar message:
     C:\Users\\Desktop\accesschk >

  6. Type the following command and press ENTER:
     "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
     Tip: You should be able to copy and paste the command into the command prompt.

  7. Close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. Double-click Accesschk.txt (text file), it should open Notepad.

  9. Copy and paste your results with a new question in the forum of Windows Update.  (Make sure that you write 0x80070005 in the subject).

  Reference1

  If this is not enough: -.

  1. If please download the subinacl.msi from the following link and save the patch to installation on the desktop:
      
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
     SubInACL (SubInACL.exe)
     SubInACL is a command line tool that allows administrators to get the security information on files, registry keys, and services, and the transfer of information from one user to another, from local or global group to and from a domain to a domain.

  2. Please, go to the desktop and double-click on the downloaded file.

  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. Click the "Start" button in the "Search" bar, type: "Notepad" (without the quotes) and press ENTER.

  5. Copy the following commands, and then paste them into the opened Notepad window:
      
     off @echo
      
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
      
     @Echo =========================
     Completed @Echo.
     @Echo =========================
  
  @pause
• After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
• View the desktop and right click the reset.bat file, then choose "Run as Administrator".
• You will see a window of type BACK treatment.
   

NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

Reference2

This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

Notes are answers Microsoft support engineers
Support for Windows Vista technical and troubleshooting problems
Microsoft Help and Support