OAM authentication scheme does not

Similar Questions

• Directory LDAP authentication scheme does not

  I did some research on how to use active directory for authentication and it seems pretty obvious, but it does not for me in the APEX, while trying to authenticate the Works database.

  I created a new authentication system

  System type: LDAP Directory Service

  Host: < < Directory Server Active > >

  Port: 389

  DN: < < FIELD > > \%LDAP_USER%

  Use the distinguished name exactly: Yes

  I made sure that the new authentication scheme is underway.

  What application is running and I'm trying to connect, debug displays:

  ... Authentication failed: Invalid Login Credentials < div id = "apex_login_throttle_div" > please wait < span id = "apex_login_throttle_sec" > seconds 30 </span > to log in again. < / div

  But, I ran a test database using this code below that I found on the web and it runs without exception, so I don't know my settings, domain, host, port, user and password are correct.  Y at - it a step that I forget?

  DECLARE

  l_retval PLS_INTEGER;

  l_retval2 PLS_INTEGER;

  l_session dbms_ldap.session;

  l_ldap_host VARCHAR2 (256);

  l_ldap_port VARCHAR2 (256);

  l_ldap_user VARCHAR2 (256);

  l_ldap_passwd VARCHAR2 (256);

  l_ldap_base VARCHAR2 (256);

  BEGIN

  l_retval: = - 1;

  dbms_ldap.use_exception: = TRUE;

  l_ldap_host: = '< < ad server > > ';

  l_ldap_port: = '389';

  l_ldap_user: = ' < < MY AREA > >-< < my user > > ';

  l_ldap_passwd: = '< < password > > ';

  l_session: = dbms_ldap.init (l_ldap_host, l_ldap_port);

  l_retval: = dbms_ldap.simple_bind_s(l_session,l_ldap_user,l_ldap_passwd);

  dbms_output.put_line (' return value: ' | l_retval);

  l_retval2: = dbms_ldap.unbind_s (l_session);

  EXCEPTION

  WHILE OTHERS THEN

  dbms_output.put_line (rpad ('ldap session', 25, ' ') |) ': ' ||

  RAWTOHEX (substr (l_session, 1, 8)).

  '(retourné depuis init)");

  dbms_output.put_line (' error: ' |) SQLERRM | ' ' || SQLCODE);

  dbms_output.put_line (' user: ' | l_ldap_user);

  dbms_output.put_line (' host: ' | l_ldap_host);

  dbms_output.put_line ('port: ' | l_ldap_port);

  l_retval: = dbms_ldap.unbind_s (l_session);

  END;

  Hello

  If it works in the database, perhaps it is a typing error in your frame at the APEX?

  Create PL/SQL processes "on the charge before the header' on connection and as a PL/SQL block page for this entry process:

  begin
    APEX_DEBUG.ENABLE(apex_debug.c_log_level_engine_trace);
  end;
  

  Then run application, try to login and check the debug information. Maybe you'll find some clues to solve your problem.

• ORA-19007 - schema does not match

  On my database, we have two matching schemas tables in each - one for the active data and the other for data which stands for research in the long term. Both contain a pattern registered XMLType column. However, when I try to insert directly from the assets in the archive, I get the following:
  
  SQL > insert into eci_archv_schema.rev_item_earn_dtl_archv
  2 Select * from eci_schema.rev_item_earn_dtl
  3 where ROWNUM = 1;
  insert into eci_archv_schema.rev_item_earn_dtl_archv
  *
  ERROR on line 1:
  ORA-19007: http://xmlns.foo.com/1.3.1/ABC.xsd Schema does not match http://xmlns.foo.com/1.3.1/ABC.xsd expected.
  
  The only way in which I can properly move the data from one to the other is to wrap select it from one of the following:
  
  1 XMLType.createXML (my_xml_column.getCLOBVal ())
  2 XMLType.createNonSchemaBasedXML (my_xml_column)
  
  These two taking unusually long to complete and cause my check-in process is very, very slow. Apparently because the patterns were recorded under different database diagrams, they are somehow regarded as incompatible. This is the case or not they actually fit in another way? Is there an easy way to compare?
  
  FYI: we are 11.2.0.3, but this also happens on 11.2.0.2. Any help would be appreciated.

  What specific information would be useful: the XSD who sign us up?

  Yes, including the one you're importing (if not too big) or a simplified version if possible?

  BTW, it's binary storage object-relational or XML?

• ORA-20000: Schema does not exist or insufficient privileges

  Salvation of DBA
  
  I do the upgrade from 9.2.0.6 to 10g database
  I'm following ID. doc. 316889.1 - step 7
  I get the following error while taking backup existing statistics as follows:
  
  SQL > exec dbms_stats.export_schema_stats ('WMSYS', 'dictstattab', statown = > 'SYS');
  BEGIN dbms_stats.export_schema_stats ('WMSYS', 'dictstattab', statown = > 'SYS'); END;
  
  *
  ERROR on line 1:
  ORA-20000: WMSYS Schema does not exist or not sufficient to analyze privileges a
  object it contains
  ORA-06512: at "SYS." DBMS_STATS", line 4984
  ORA-06512: at "SYS." DBMS_STATS", line 5007
  ORA-06512: at "SYS." DBMS_STATS", line 5409
  ORA-06512: at line 1
  
  SQL > exec dbms_stats.export_schema_stats ('XDB', 'dictstattab', statown = > 'SYS');
  BEGIN dbms_stats.export_schema_stats ('XDB', 'dictstattab', statown = > 'SYS'); END;
  
  *
  ERROR on line 1:
  ORA-20000: XDB Schema does not exist or not sufficient to analyze privileges a
  object it contains
  ORA-06512: at "SYS." DBMS_STATS", line 4984
  ORA-06512: at "SYS." DBMS_STATS", line 5007
  ORA-06512: at "SYS." DBMS_STATS", line 5409
  ORA-06512: at line 1
  
  
  SQL > exec dbms_stats.export_schema_stats ('WKSYS', 'dictstattab', statown = > 'SYS');
  BEGIN dbms_stats.export_schema_stats ('WKSYS', 'dictstattab', statown = > 'SYS'); END;
  
  *
  ERROR on line 1:
  ORA-20000: WKSYS Schema does not exist or not sufficient to analyze privileges a
  object it contains
  ORA-06512: at "SYS." DBMS_STATS", line 4984
  ORA-06512: at "SYS." DBMS_STATS", line 5007
  ORA-06512: at "SYS." DBMS_STATS", line 5409
  ORA-06512: at line 1
  
  
  SQL > exec dbms_stats.export_schema_stats ('LBACSYS', 'dictstattab', statown = > 'SYS');
  BEGIN dbms_stats.export_schema_stats ('LBACSYS', 'dictstattab', statown = > 'SYS'); END;
  
  *
  ERROR on line 1:
  ORA-20000: LBACSYS Schema does not exist or not sufficient to analyze privileges
  an object it contains
  ORA-06512: at "SYS." DBMS_STATS", line 4984
  ORA-06512: at "SYS." DBMS_STATS", line 5007
  ORA-06512: at "SYS." DBMS_STATS", line 5409
  ORA-06512: at line 1
  
  
  SQL > exec dbms_stats.export_schema_stats ('DMSYS', 'dictstattab', statown = > 'SYS');
  BEGIN dbms_stats.export_schema_stats ('DMSYS', 'dictstattab', statown = > 'SYS'); END;
  
  *
  ERROR on line 1:
  ORA-20000: DMSYS Schema does not exist or not sufficient to analyze privileges a
  object it contains
  ORA-06512: at "SYS." DBMS_STATS", line 4984
  ORA-06512: at "SYS." DBMS_STATS", line 5007
  ORA-06512: at "SYS." DBMS_STATS", line 5409
  ORA-06512: at line 1
  
  
  SQL > exec dbms_stats.export_schema_stats ('SI_INFORMTN_SCHEMA', 'dictstattab', statown = > 'SYS');
  BEGIN dbms_stats.export_schema_stats ('SI_INFORMTN_SCHEMA', 'dictstattab', statown = > 'SYS'); END;
  
  *
  ERROR on line 1:
  ORA-20000: SI_INFORMTN_SCHEMA Schema does not exist or insufficient privileges
  to analyze an object it contains
  ORA-06512: at "SYS." DBMS_STATS", line 4984
  ORA-06512: at "SYS." DBMS_STATS", line 5007
  ORA-06512: at "SYS." DBMS_STATS", line 5409
  ORA-06512: at line 1
  
  Please guide me to solve the problem above.
  
  Thank you
  SG

  SG,

  You can ignore these errors.

  Note: 359483.1 - upgrade from 9.2.0.6 to 10.1.0.4.2 with Applications 11.5.10.2
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=359483.1

  Kind regards
  Hussein

• Form in OAM authentication scheme

  I have two application protected by authentication of different form two schemes in OAM. In the application1 login screen, I have a link to application2.
  But I'm not able to go to application2, and it always ends up in application1 if it's him that I consulted first.
  Please help me how to solve this problem. I couldn't find any reference to this type of configuration in the documentation of the OAM.
  I didn't something different in the authentication scheme.
  TIA

  You are not able to connect to the application because OAM uses a cookie called ObFormLoginCookie to keep track of the target. When you click on the link of applicaiton2 of the connection of application1 shape the webgate seeks the ObFormLoginCookie that is already there and act on that basis. That's why we always to the application1 if you have access to this first.

  Strangely OAM do not update the obFormLoginCookie that it should have.

  The best way here would be to use action challenge parameter of the authentication scheme. Need to define separate actions for two authentication schemas. The actions that the gestures of form in login forms and protect the action with the anonymous authentication scheme.
  Actions can be anything.

  OAM form the cookie with the path specified in the action of the authentication scheme. With the obFormLogincookie in ways different webgate updates the cookie for both applications and you'll be able to navigate the form of connection of 1 application to another application and vice versa.

  Hope this helps,
  Sagar

• 802. 1 x authentication aid does not work

  According to the CEC documents, the following command should be a switch to do authentication for 802. 1 x for users. If this fails, the switch must fall back to no authentication. This prevents users to be locked to the network if the AAA/RADIUS server goes down.

  radius of group AAA dot1x default authentication no

  However, this command does not, at least not on the Catalyst IOS switches. If you disable the RADIUS server, the switch continues to try to use RADIUS regardless of the command above, even if the debugging indicates that the RADIUS server is dead.

  This directly conflicted with the following doc:

  http://www.Cisco.com/en/us/customer/products/hw/switches/ps646/products_command_reference_chapter09186a00801cdf12.html#1995856

  It is quite wrong that anyone who put implement 802. 1 x will be locked out of their network if the RADIUS server fails.

  Wireless access points do not have this problem because they can use a local RADIUS server. But it's a big problem for anyone with 802. 1 x running on cable networks.

  When Cisco will be be to fix this problem?

  Thank you.

  PAUL G.

  This does not work for 802.1 x and Catalyst switches.

  We will fix the documentation.

  In addition, Wireless APs don't have this problem with JUMP.

  Therefore, the challenge with Wired.

  Many EAP types, many types of back-end databases, etc. all need to review.

  We will have a configurable button in the near future to address, but as always, redundancy is recommended.

• 802. 1 x authentication port does not

  I have trouble to know what is happening here. I'm trying to configure 802. 1 x port authentication based to assign customers to a VLAN. I inherited this mess and his for a long time I used it. I ran a wireshark on the radius of my server and I see no same package from my IP address switch when I plug into a port (I checked communication because pings come in my trace)

  Pass the info:

  SW-ConfB > sho worm

  Cisco IOS software, software of C2960C (C2960c405-UNIVERSALK9-M), Version 12.2 (55) EX3, VERSION of the SOFTWARE (fc2)

  Port config:

  interface FastEthernet0/11

  switchport mode access

  authentication event failure action allow vlan 900

  no response from the authentication event action allow vlan 900

  Auto control of the port of authentication

  dot1x EAP authenticator

  dot1x tx-period 5

  The RADIUS server info:

  key acct-port 1646 1645 auth-RADIUS-server host 10.0.1.52 port 802.1 x!

  A little confused why not package Radius comes even from the switch. Any tips?

  According to debug it, it seems that the supplicant connected on the switch port does not support the dot1x and MAB is not configured on the switchport so no method left to try and you got the vlan COMMENTS.

  3 Mar 04:37:47.963: % AUTHMGR-7-RESULT: authentication result 'no response' of 'dot1x' for the customer (d4be.d907.9637) on the Interface Fa0/11 AuditSessionID 0A000103000000090B4AD0F6
  * 04:37:47.963 3 Mar: % AUTHMGR-7-FAILOVER: failover "dot1x' for the client (d4be.d907.9637) on the Interface Fa0/11 AuditSessionID 0A000103000000090B4AD0F6
  * 04:37:47.963 3 Mar: AUTHMGR-7-NOMOREMETHODS %: exhausted all methods of authentication for the client

  At this point, the RADIUS is not even came into the picture. Please make sure that the end customer is configured correctly for the dot1x parameters.

  Kind regards

  Jatin kone

  * Make the rate of useful messages *.

• Feature of simple authorisation scheme does not

  I am using an authorization scheme based on a 'function from PL/SQL returning a Boolean' and seem to be running into trouble.
  
  I have a function (in a package) that verifies users 'role' as specified in the table users and returns true or false for whether or not they are privileged... sounds simple to me...
  
  The only problem is, when I try this in the APEX (4), it gives the following error.
  
  ORA-06550: line 2, column 1: PLS-00221: 'APPROVE_ME' is not a procedure or is undefined ORA-06550: line 2, column 1: PL/SQL: statement ignored
  
  I have checked and double-checked everything is stated correctly and that's it works fine... except with APEX.
  
  Someone at - it ideas? Or y at - it something that my lack of experience does not happen?

  How did you enter the code in 1 Expression for the authorization scheme?

  return .
  

  I was able to reproduce your problem by leaving out the "return" statement

  Van
  Trent

• Custom mouse pointer scheme does not load at startup

  I am running windows vista Home premium and I downloaded a mouse on the internet system. I saved the regime as "smooth" and clicked on apply and it worked. But when I restarted my computer, the system of mouse returns to the plan original windows vista aero. I've tried to stop all non-microsoft msconfig services and disabled all services start and enabled in the well, but yet the scheme has not been loaded.

  balingsta,
  Thank you for visiting the Microsoft Answers community forum.

  If your mouse is a Logitech brand, it deals with the issue.    If this is not the case, let us know what you have the mouse and we will try to help you solve this problem.

  This should solve your problem:

  1. click on start, type "msconfig" in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  2. in the System Configuration dialog box, click the Startup tab
  3. Locate the entries called KHALMNPR or similar and uncheck the box next to each of them.
  4. click OK and restart your computer.
  5. after the restart, change your mouse pointer, the way you want and restart again.  Your mouse settings remain the same.

  Let us know if this information was useful or if you need assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Windows 7 ultimate is authentic, but does not have the activation key, can somebody help me please?

  I got my school of hollow of W7 and is still viable, had a key that worked very well, until I was stupid enough to try to use the kode to 64-bit upgrade, now it does not turn on and I don't know if I can return the old key. It is a MUST to activate? If so help! AS SOON AS POSSIBLE

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft. com/ ? kbid = 326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• APEX permission scheme does not not after importation

  Hi all

  I work with APEX 4.2. I created a simple application APEX with a diagram of permission on a development server. After export and import on the production server authorization system does not work. However, it is displayed as expected in the IDE. Someone at - it this experience?

  I figured this out. After import, I needed run the access control administration page and set the mode of application of restricted access, and add users to the list of access control.

• Problem with complex schema does not

  Hello

  I created the fairly complicated pattern: http://i.imgur.com/Wt2Bo7w.png

  And when I'm playing with him (some pathfinder to the cutting edge etc.) Illustrator is "not responding" problem and after a few minutes it comes back to life (with process finished). It's weird because my machine is pretty good and Illustrator, while that "does not" use only 30% of my CPU and about 6 GB of ram (I've got 16 GB). Is there a way to make it faster? What would you recommend?

  Try using fill patterns.

  Or try to use overlays raster graphics

• Not available user: schema does not exist in the database?

  Hi team,
  
  I am trying to add to the existing table. Plaintiff mentioned schrma_name and table_name.
  
  I used under request... to find the schema exists or not.
  
  Select the username, ACCOUNT_STATUS from dba_users where username = "ABCD_USA_NUM";
  
  no selected line.
  
  Please suggest one., average user schema did not exist right did not exist? It is 4 knots of RAC database.
  
  Thnaks

  Please suggest any one., User not existed means schema not existed right?. This is 4 nodes RAC Database.
  

  In your case, Yes.

  Rgds,

  Ahmer

  N.B.: To win a good reputation on the forums, and if you want that your question will be answered in due time. Kindly adopt a used to score your closed questions as soon as you give the answer. and be courteous to people who tries to help.

• Dynamic schema does not work with LOV

  Hello community,
  
  I have a problem with a sql LOV in the apex which seems to be rare, due to the fact that it works in other circumnstances. So the problem is:
  
  I have an Apex application which works for different clients, and each client has a different schema. So, what I do to get the data of diferent from diferent clients is just to change the schema dynamicaly.
  
  Example:
  H4. Select name as display, id like code of * & schema.*.employee
  
  Where * & schema.* is dynamicaly defined by the user in the application. The funny thing is that this works very well for reports, but not for LOV, and when I try to apply this sql error, + 'LOV query is not valid, a display and a return value is needed, the column names must be different. If your query contains a query online, the first CLAUSE in the SQL statement must not belong to the query online. ' +, is shown, which is not say the real problem.
  
  I have not found much info on this subject, but I read somewhere that the sql LOV is validated and executed when you try to apply the changes, and in the reports his only valid and executed at run time.
  
  How can I solve this problem, if anyone has any ideas.
  
  Thanks in advance!

  The sql LOV is indeed validated and executed at design time. Configure your LOV query to something like

  if apex_application.get_current_flow_sgid(:APP_ID) = apex_application.get_sgid then ----- runtime
  return 'select name as display, id as code from &schema..employee';
  else  -- design time
  return 'SELECT  dummy d, dummy v from dual' ';
  end if;
  

  CITY

• After impdp, remapped schema does not appear in the APEX

  Hi all

  After import and remapping scheme in my Inbox from dev to production environment (in which we use apex) I'll try to find the pattern newly imported on my machine of dev of the internal admin account apex, but I can't see it and can't find it anywhere. I might need to sort the new scheme 'available' in the environment of the APEX?

  All comments, suggestions and any kind of help are really appreciated since I have no experience in these things.

  Concerning

  Wrong forum!

  This isn't a matter of Oracle DB. It's a question of access to the Forum of the APEX.

  Please mark the thread ANSWERED and repost it in the forum of the APEX.

  Oracle Application Express (APEX)