OAS 10 g lost connection to the database

Similar Questions

• Connect to the database that has lost access to a partition

  Hi all
  Suppose we have a partitioned table that look in some storage (physically) different. If the database lost access to one of them, what happens? The database can be loaded? If the user is unable to connect to the database, what can we do to solve the problem (because one of the characteristics of partitioning is availability)? If a user tries to get some data (by request), oracle will declare that a partition is not available and so the information may be incomplete?
  Best regards

  Interesting, above should work without error, as is explained in the following note:

  * How drop a Tablespace offline when the Partitions of a partitioned Table resides in [ID 267125.1] *.

  I wrote my previous post based on my memory of a similar situation several months ago, but I tested it again now:

  SQL> create tablespace part01 datafile 'C:\oracle\base\oradata\ORCL\part01.dbf' size 10M;
  
  Tablespace created.
  
  SQL> create tablespace part02 datafile 'C:\oracle\base\oradata\ORCL\part02.dbf' size 10M;
  
  Tablespace created.
  
  SQL> create table t1 (id number, text varchar2(100), constraint id_pk primary key (id))
      partition by range(id)
      (
      partition low values less than (1000) tablespace part01,
      partition high values less than (2000) tablespace part02
      );
  
  Table created.
  
  SQL> insert into t1 select rownum, 'hello' from dual connect by level <2000;
  
  1999 rows created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> shu immediate
  Database closed.
  Database dismounted.
  ORACLE instance shut down.
  SQL> exit
  Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
  With the Partitioning option
  
  del C:\oracle\base\oradata\ORCL\_part01.dbf
  sqlplus / as sysdba
  
  SQL*Plus: Release 11.2.0.3.0 Production on Sun Apr 21 10:36:35 2013
  
  Copyright (c) 1982, 2011, Oracle.  All rights reserved.
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
  With the Partitioning option
  
  SQL> startup
  ORACLE instance started.
  
  Total System Global Area 2137886720 bytes
  Fixed Size                  2256912 bytes
  Variable Size            1392513008 bytes
  Database Buffers          738197504 bytes
  Redo Buffers                4919296 bytes
  Database mounted.
  ORA-01157: cannot identify/lock data file 5 - see DBWR trace file
  ORA-01110: data file 5: 'C:\ORACLE\BASE\ORADATA\ORCL\PART01.DBF'
  
  SQL> alter database datafile 5 offline drop;
  
  Database altered.
  
  SQL> alter database open;
  
  Database altered.
  
  SQL> select count(*) from t1;
  select count(*) from t1
                       *
  ERROR at line 1:
  ORA-00376: file 5 cannot be read at this time
  ORA-01110: data file 5: 'C:\ORACLE\BASE\ORADATA\ORCL\PART01.DBF'
  
  SQL> select count(*) from t1 where id >= 1000;
  
    COUNT(*)
  ----------
        1000
  

  Note that, drop partition might work, based on the structure of the table / index, but I created an example where it does not work.

  
  SQL> alter table t1 drop partition low;
  alter table t1 drop partition low
  *
  ERROR at line 1:
  ORA-00376: file 5 cannot be read at this time
  ORA-01110: data file 5: 'C:\ORACLE\BASE\ORADATA\ORCL\PART01.DBF'
  
  SQL> create table t2 as select * from t1 where 1=2;
  
  Table created.
  
  SQL> alter table t1 exchange partition low with table t2;
  
  Table altered.
  
  SQL> select count(*) from t1;
  
    COUNT(*)
  ----------
        1000
  

• VAIO Messenger-unable to connect to the database

  I had this problem for months. When I connect to the internet... about 10-15 minutes later... a box opens "Vaio Messenger unable to connect to the database." I'd like to just turn off Vaio Messenger. I looked up how to disable Messenger but he always States go to the settings dialog box. For the life of me I can't find a dialog box. How can I disable Messenger? How do I repair Messenger so it CAN connect to the database? Help!

  I had this problem for months. I can't change the dialog box. I can't uninstall vaio Messenger. I have so much pain to find this site, if you have a cure please write me [email protected]

• Test the connection to the database failed: connection to the server could not

  I have one of my servers HPOV NNMi 9.23 restarted this morning and NNMi is loading is no longer.  I see the following errors in the newspapers said:

  /var/opt/OV/log/NNM/public/nmsdbmgr.log

  06/04/2015-09:28:05 connection to the database test failed: connection to the server could not: connection refused
  The server running on host "127.0.0.1" and accept
  TCP/IP connections on port 5432?

  /var/opt/OV/log/NNM/public/postgres.log

  2015-04-06 09:25:55.312 EDT: 8580:0LOG: could not translate the hostname "localhost", "5432" service at the address: name or service not known not

  2015-04-06 09:25:55.312 EDT: 8580:0WARNING: could not create listen to "localhost".

  2015-04-06 09:25:55.312 EDT: 8580:0FATAL: could not create TCP/IP sockets

  I have checked/etc/hosts and found the following entry:

  #; Local
  #;
  127.0.0.1 localhost

  The command line, I can ping localhost without problem.  Not sure why NNMi begins not at this point.

  Turns out be the permissions on the file/etc/hosts.

• How to connect to the database

  Hi all

  I use labsql (and quite new to him m) and the server Mysql 5.1.I wanted to know how to connect to the database without changing the name of the dsn from the tools administrative/ODBC 5.1 driver manually. I want to install exe in several PC and it would be a great help if I could make the connection directly but my Vi.

  I went through several forums and came to know that 'Provider = ProviderName; Data Source = DatabaseSource; Initial Catalog = DatabaseName; User = username ID; Password = password', should solve the problem. But where in my case I m still confused. The connection string above does not sit well with me.

  Can someone help me please.

  Have a look here, where I have such a picture to show how to form a string constant to connect to the database. Some subsequent posts in this thread should also be useful.

  Good luck!

  Ian

• HH.exe crashes - lost connection to the online help and Support window

  HH.exe crashes - lost connection to the online help and Support window

  SYSTEMATICALLY, FOR MONTHS, WHEN I SEARCH WINDOWS HELP I got THE MESSAGE.

  "You have lost your connection using Windows and Support website. . Try to connect again. "
   

  Windows Error Reporting shows several times:

  1. HH.exe hangs and does communicate with Windows
  2. MsSearch TerminateProcess & #x000d
  3. ApphelpSoftBlock & x000d #.

  I have no problem connecting to Windows Web sites otherwise or to other sites on the web.

  Can someone tell me how to fix this?

  (I'm running VISTA 32 bit)

  Hello

   
  This behavior is caused by a corrupted or damaged HH. DAT file.
  
  This may occur if Antivirus or a firewall, you have installed the program it blocks.
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• I get an error message: The Nvidia OpenGL driver lost connection with the display driver and can not continue. Error code 8

  When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?

  Information System
  ------------------
  Time of this report: 13/06/2011, 19:40:20
  Machine name: BEN - PC
  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
  Language: English (regional setting: English)
  System manufacturer: HP-Pavilion
  System model: GC670AA-ABA a6120n
  BIOS: Phoenix - AwardBIOS v6.00PG
  Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 4096 MB RAM
  Available OS memory: 3582MB RAM
  Page file: 1690MB used, 5472 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  User DPI setting: 96 DPI (100%)
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  Two monitors

  Display devices
  ---------------
  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1600 x 900 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: G205H (Acer)

  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1280 x 1024 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: NEC LCD7V

  Hello

  I suggest that you have watch the following link below:

  http://forums.developer.nvidia.com/index.php?showtopic=5331

  I hope this helps.

• RCU error: unable to connect to the database using the contact information provided

  Hello

  I am not able to connect to the database using the remote control 11.1.1.10.1 to create patterns. I ran the UCR even a week ago and I managed to connect. My database and listener are up and running and the host and the credentials are correct. I don't know where is the problem. Any help will be appreciated. Attaching the screenshot for reference.

  

  Concerning

  Oumaima

  Hi Handal

  Thanks for the reply. Looks like someone had blocked the firewall settings, so I was unable to connect to the database using the port.

  Thank you

  Oumaima

• How to connect to the database without sqlclient soa

  Hi all

  I have a very simple question.

  I need to write a shell script to get some stats for bpel instances of database as part of the daily health check.

  The problem is in our area of unix server, any customer database is not installed.

  Sql client is present as part of the installation of SOA that we can use to create the connection to the database? or by any mode of access to the shell database.

  Thanks in advance,

  Bob

  Hi Bob, there.

  most of the components in the FMW stack including SOA infrastructure rely on pure JDBC to talk to RDBMS and as I know there is no client Oracle installed in slot the FMW home (after installing SOA Suite).

  One possibility would be to use the Oracle Instant Client and use its tools from your shell scripts. It's a bit unzip and run Setup.

  HTH,

  A.

• Unable to connect to the database. adbldxml.pl

  I've updated 11.1.0.7 12.1.0.2 database database with a 12.1.3 apps

  I produced the apps appsutip.zip and copied to the 12.1.0 oracle home

  but when I run perl adbldxml.pl in appsutil/bin and answering questions that I can't connect to the database

  Hello

  When I run the listener his race of my former oracle home how change that

  You must stop the listener of the old House and new start home. You may need to copy all the files from the old House to the new house network and change the oracle home location in all the files manually (or) you can configure the new listener of 12 at home.

  To get an idea please see my blogpost:

  http://appsdbaworkshop.blogspot.com/2012/03/Oracle-11gr2-database-upgrade-in-apps.html

  Kind regards

  A H E E R X

• Impdp not connect to the database without error returns

  Kind regards.

  Please ask your usual support, motivated, that I am facing a strange problem.

  I recently did an expdp of different actions, the database on which the export is carried out version 10.2.0.4 Now, I'm doing impdp on a database whose version is 10.2.0.5.

  The Datapump not return any errors, does not seem to connect to the database, the impdp log shows:

  ;;;

  Import: Version 10.2.0.5.0 - 64 bit Production on Friday, August 7, 2015 11:13:43

  Copyright (c) 2003, 2007, Oracle.  All rights reserved.

  ;;;

  Connected to: Oracle Database 10 g Enterprise Edition Release 10.2.0.5.0 - 64 bit Production

  With the partitioning, Data Mining and Real Application Testing options

  I wonder if this is a bug or compatibility of version of the problem.

  Thanks in advance.

  Best regards.

  The first thing I see is that you specify on the impdp command expdp.par.  This can work, but don't forget, there are expdp parameters that do not work in impdp. This should give an error, but not knowing what is in the file, it is difficult to see what might happen.

  You can add trace = ff0b00 and then watch to see is it y * dw*.trc files were created.  If not, then it is failing in the treatment of your settings and you want to in the last * dm*.trc file can help out you.

  Dean

• Unable to connect to the database GGSCI

  Hi experts,

  Currently, I am trying to configure an installation of goldengate and have a problem with the connection to the database through GGSCI.

  In SQLPLUS and sql developer, I can connect to the database, but thanks to GGSCI is impossible to connect to the database.

  I am trying to connect this name ggate@service, I get an error ORA-12504. I am unable to connect using this method.

  ggate@ggsrc password username dblogin *.
  ERROR: Could not connect to the database using the user ggate@ggsrc. Please check privileges.
  ORA-12504: TNS:listener did not have the SERVICE_NAME in CONNECT_DATA.

  granted DBA privilege user GGATE but still cannot connect to the database, can any one help on this subject, it is very useful.

  Thanks in advance.

  AT

  Hi thanks,

  After the set up TNS_ADMIN environment its works very well

  Thank you

• HP DV6T-1300 lost connectivity to the internet, error display 701

  I have a laptop HP DV6T - 1300 Entertainment who has lost connectivity to the internet, and it displays error 701. All of my diagnostic checks, I think that he has lost the pilot because he does not have a wireless card. I downloaded the drivers wireless (five each) HP support and assumes that the Realtek driver is the original. What is the purpose of all other drivers (Broadcom, Atheros, Wireless & Bluetooth Pro) and they need to be installed or not? They are updated day or improvements or are drivers for the other cards in different models of this computer? I use the laptop for my wife to access the net until I fix this. Thanks in advance!

  After that to install the Realtek driver (original), I discovered that the software does not recognize that there is a wireless card. In my view, the map is part of the motherboard and may have failed. I suspect that my best solution may be to buy an external wireless card and install it. Any suggestions?

  I don't know exactly what happened, but after restarting a couple of times, the wireless card started working again. He works actually better than what he has. The downloaded driver was an updated version, and this may explain the improvement.

  Different cards for different models of different computers in your model class.  You only need the driver for your system.

  The updated driver for your model of correction probably your problem.  The fact that it works better than before is, of course, a plus.

  If you don't already have it, here is the wireless connection manager:

  HP sp54945 V4.1.25.1 Connection Manager

   

  Connecting to a network with the 4.x connection manager

   

   

  For your reading pleasure:
  

  Domestic use Wireless-G and Wireless-N devices on a network

   

   

• Administration client OBIEE 11 g tool - cannot connect to the database.

  Hello

  I installed OBIEE 11 g on linux platform and installed 11g admin client tool in windows server.

  My database is installed on another server (not in the installed tool of client machine). I created the ODBC DSN in the windows machine. But when I create the new repository and when I give the credentials for the database to connect I get connection failed.

  I don't have any customer database oracle installed on the windows machine. Is there something to configure on windows server?

  Any help and guidance would be much appreciated.

  Thank you

  MK.

  I installed the client 11g and one more thing that missed me is the setting of the variable of environment path in windows machine. Whenever I tried to connect to the database through the RPD, it seeks the oracore11.dll file. I mentioned the location of the oracore11.dll file in the path variable, and everything worked fine for me

  Kind regards

  MK

• CFGFWK-60850: the Test failed! CFGFWK-60853: A connection to the database, but no lines have been returned to the examination of the SQL query.

  Hi all..

  It's SOA 11.1.1.7... I created the schema and storage via RCU but when I try to configure JDBS schema components... his throw this error:

  CFGFWK-60850: the Test failed!

  CFGFWK-60853: A connection to the database, but no lines have been returned to the examination of the SQL query.

  I created 3 users of UCR and who were all successful, because I have no error... of these three alone is managed in the configuration tree SOA...

  No idea why like that...

  Thank you

  Aerts

  This that I solved it by installing EMP 11.1.2.2 with UCR and SOA 11.1.1.6...