OBIEE 101341 & password for ldap authentication

Similar Questions

• Default password for LDAP sync accounts that do not use LDAP authentication

  We use CUCM 10.5.1.  We have enabled LDAP and installation directories.  I can see the previous local users and new users sync ldap.  I know that if there was a previous local user with the same user as the new ldap user ID, this account is converted into an ldap account and I guess the password stay the same before ldap integration.   But what of the new ldap sync protocol accounts?  I see that there is a field of password for them, but what is the default password for these newly created accounts and where I can edit this default password?

  I do not have a 10.x here, but on previous versions, "credentials political default" sets the default password.

  It was under the management/diploma default user policy. Choose the 'end user' political 'password' and put the default value you want here. It may be in a slightly different place from 10.x

  Aaron

• Mozilla does not remember password for ldap, even if I check the box 'remember '.

  Whenever I get an email address, Mozilla appears the "LDAP Server password required'. I have the password and check "Manager password use to remember this password". Then the message appears again. Again, I get the info. Then it accesses the LDAP server. But the next time I type an email address, it doesn't have remember the password.
  Thank you, Rudy

  Could be the password for the files are corrupt and not accepting does not change, I would like to delete (or move to somewhere safe) these files in the profile folder: keys.db, signons.sqlite, sign # .txt. Select help/troubleshooting information, click view the folder to open the profile folder, TB, exit and delete or move the files.

  You can save passwords stored before opening Tools(or AppMenu/Options)/Options/Security/passwords / Saved passwords, that remove the password profile files will delete all passwords.

  http://KB.mozillazine.org/Password_Manager#troubleshooting

• Help with LDAP authentication

  Can anyone help me please with the fields required for LDAP authentication. My network administrator has sent me the following
  
  LDAP://xxx.xxx.XX.x:389 / o = companyname? UID
  
  Should the host be ldap://xxx.xxx.xx.x or just xxx.xxx.xx.x?
  What looks like the DN? Wouldn't be just o = companyname, uid = % LDAP_USER %?
  
  I tried a bunch of different scenarios against the LDAP test, but not luck. I checked THAT LDAP is working properly by means of other applications that use it.

  First, use Google for some free LDAP viewers. Those who will help a lot, and they usually work approximately 30 days before you have to pay to save them.

  Then, specify the address of the LDAP server in the program, connect and try to find your information. My big problem has tried to get all understood, was that I also had to precede the domain name, something like user domain\username. Once I saw that in the LDAP viewers, and I used the same formula in my authentication routines, everything worked perfectly.

  Among the free that I used was called LDAP administration tool.

  Hope this helps, get LDAP working has been a huge headache until this.

  Bill Ferguson

• OBIEE LDAP authentication

  Hi guys

  We have recently implemented authentication LDAP for OBIEE.

  We use Microsoft Active Directory to authenticate OBIEE.

  The strange thing is some users may connect to obiee which is part of the ldap system and some users cannot connect to obiee,.

  Both users, who can and can not connect is part of the same groups.

  What password restrictions, may be that the password for this user is complex or simple?

  Are there any standards OBIEE password during authentication LDAP?

  Best regards

  Benoit

  Hello

  Yes, this is 'above' default values and that's fine (all together for 'SUFFICIENT', I hope), but they are all in the field of security of the WLS that is what OBI uses through the spine - i.e. the OPSS, the Security Service Oracle platform.

  My point was that when there is an authentication problem and your key authenticator is MSAD, then the problem there or in integration, but not the final interpretation application which is OBI.

  So you have to go through all of your integration-related settings to security, check if you can actually take the user and groups through the WLS console, for example, ensure that the identity store config contains the correct mappings for user.login.attr/username.attr, PROPERTY_ATTRIBUTE_MAPPING, and/or that you set him virtualize = true in order to use several security vendors.

  In addition, get a LDAP browser to check what is actually the MSAD. I've seen cases where the LDAP protocol connected to OBI was a clone / secondary instance and contains corrupted user input that had to be cleaned from LDAP.

• For Cloud SGD LDAP authentication for users and administrators

  Hello.

  I recently completed the installation of my new cloud of SGD 12.1.0.3 on Linux 6.4 (on a virtual machine).

  My question is if it is possible (and how) to enable authentication for new administrator SGD through LDAP accounts?

  We have already our VM hosts configured to allow LDAP authentication to theirs, but how to configure WHO to enable LDAP authentication even as users of server?  Because users are in LDAP, they do not have a local account on the servers, and we do not necessarily want users of WHO in order to connect the servers anyway.

  One of the objectives to use LDAP is that we want to allow users to have only to change their domain/LDAP password and everything else is updated.

  I see that when an account is created in the OMS, the user is created in the repository of OMS database.  I really want to restrict not know them to log directly in the database, but do how this is possible.  Can we still use pupbld for this?  Probably not...

  I read the book below the Oracle documentation, but it is for SGD 11.1 and I'm under 12.1.

  But the same year, he was not very descriptive about how to set up.

  It sounds almost as if you had to take the decision to use LDAP for the installation of beginning of WHO.

  I hope not, and I do not remember that as an option that I have installed the SGD.

  Configuration of Oracle Enterprise repository to use external authentication tools - 11 g Release 1 (11.1.1.7)

  Yes, you can still integrate with LDAP.   Please see the documentation here

  http://docs.Oracle.com/CD/E24628_01/doc.121/e36415/sec_features.htm#CJAGHGAH

  EM use WLS for authentication, so everything that is supported by this version of WLS will work.  Documentation received instructions for OAM/OID/HAD and Active Directory are specified.

  Users can be changed to type external if they are already created in the repository with the appropriate connection name.   Otherwise, new users can be created.

  Also be sure to examine the external roles option, which allows you to map a LDAP group to an external role in EM by using the same name and automatically assigning the privileges required by this group.

• during installation it asks usename proxy and password for authentication. What should I fill in here?

  during installation it asks proxy username and password for authentication. What should I fill in here?

  Hello

  Please see Support of Proxy in creative cloud products

  Kind regards

  Sheena

• Username and password for you connect on analytical OBIEE and BI Publisher

  After Installation of OBIEE when connect to Enterprise Manager (http://srv-007:9704/em) with the username: oc4jadmin and password: oracle1 it connect successfully, but when it comes to connect to analytic OBIEE (http://srv-007:9704/Analytique) and BI Publisher (http://srv-007:9704 / xmlpserver /) I am trying to connect with the username: administrator and password)) : administrator, it gives an error Impossible to Log In and failed to connect, please try again respectively.
  
  Is it possible to change the password?
  
  Kindly help me with this problem
  
  
  Kind regards
  Yasser

  Before resetting the password check the BI server is running or not. If BI server does not start the server and try again with uname / Pwd - administrator/administrator once.

  Password reset.

  Visit this link,

  http://bischool.WordPress.com/2009/08/07/forgot-password-for-OBIEE-RPD-or-resetting-admin-tool-password/

  This I said to OBIEE 10 g.

  Thank you
  Vino

  Published by: Vinodh NK on December 2, 2010 22:20

• LDAP authentication on vty router login

  I'm trying to deploy authentication ldap (AD MS) for a connection vty router. I used the manual like this - http://www.cisco.com/en/US/docs/ios-xml/ios/sec_usr_ldap/configuration/15-2mt/sec_conf_ldap.html

  But my scenario was unlucky

  My config is...

  _____

  AAA new-model

  !

  !

  AAA server ldap ad1 group

  test server

  !

  AAA authentication login default group local ad1

  AAA authorization exec default authenticated if

  !

  jump...

  !

  map1 LDAP attribute-map

  user name of card type sAMAccountName

  !

  test LDAP server

  IPv4 172.16.107.145

  attribute map map1

  Retransmission Timeout 20

  bind authenticates root-dn CN = Administrator, CN = users, DC = fabrikam, dc = com password 7 02050D 480809

  base-dn CN = users, DC = fabrikam, dc = com

  _____

  instead of "ldap attribute-map map1" I tried to use "search user-object-type-filter name. No effect

  I used wireshark for sniffer of cisco to AD packages. No package at the port of AD (389 or 3268) have been captured.

  I used the ldap debugging all the

  This is the output

  * Jun 9 19:38:45.414: LDAP: LDAP: AAA Queuing 117 of treatment application

  * Jun 9 19:38:45.414: LDAP: received the queue event, new demand for AAA

  * Jun 9 19:38:45.414: LDAP: LDAP authentication request

  * Jun 9 19:38:45.414: LDAP: no attributes to check username mental health

  * Jun 9 19:38:45.414: LDAP: name of user/password validation test failed!

  * Jun 9 19:38:45.414: LDAP: LDAP not suport interactive logon

  Note the last string. Is that what it means I can't use ldap for this?

  What I've done wrong?

  I am grateful for!

  LDAP on IOS support is limited to the VPN authentication and unfortunately cannot be used for authentication of the Admin (exec).

  CSCug65194    Document nonsupport LDAP for authentication of connection

  AAA does not support using a LDAP method for interactive logon authentication. Customers can configure 'aaa authentication login default group ldap', but when an interactive session (Terminal) attempts to authenticate via the LDAP protocol, the

  following message is syslogged:

  "LDAP: LDAP does not support interactive logon [sic]."

  This is due to the aaa/ldap/src/ldap_main.c of next record ldap_authen_req():

  If (intf & intf-> ATS) {}

  LDAP_EVENT ("LDAP don't suport interactive logon");

  ldap_method_failover (proto_req);

  Jatin kone
  -Does the rate of useful messages-

• UCS Manager 2.2 - LDAP authentication

  Hello

  I have some general questions about authentication LDAP and UCS Manager.

  I hope it's unterstandable...

  We have the following structure:

  • DC = Company.domain.com
    • OU = Domain Administration
      • OU =Administrators
        • UO = Germany
          • CN = User1-SMA
          • CN = SMA-user2
      • OU = Test-UO
        • CN = ucstestuser
        • CN = ucsadmingroup--> Member = SMA-user1, user2-SMA
          

  I added an LDAP provider

  binduser is the SMA-User1

  Base DN = OU = Domain Administration, DC = company, DC = domain, DC = com

  attribute = empty

  filter = sAMAccountName = $userid

  password for User1 SMA

  group permission / recursive enabled.

  I have not add some attributes or map the group. Now I can connect with ucstestuser (read-only), but not with SMA-user1 user2 SMA oder.

  If I add ucstestuser to ucsadmingroup a map of this group, ucstestuser can access and have right to admin, ADM-user1 and user2-adm cannot access (user authentication failed).

  I don't understand, why ucstestuser can access and other users in a different OU not. Unique database name is domain Administration, so that UCSM should see all three users, not?

  Can anyone help? Thank you.

  / Danny

  With UCS remote authentication when a user connects using a temporary account on the FI as a UCS-MyAuthDomain\myusername, which is limited to a total of 32 characters.  If you shorten the name of domain authentication defined in UCSM domain.com to a shorter name as AD, it will allow for the use of a username any longer.

  Note

  For systems using the remote authentication protocol, the authentication domain name is considered to be part of the user name and the limit of 32 characters for usernames created locally. Because Cisco UCS inserts 5-character formatting, the authentication will fail if the name and the user character domain name combined total is greater than 27.

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/SW/GUI/config/Guide/2-2/b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_1_chapter_01000.html

• Asa and Cisco ldap authentication

  Hi all

  I have a problem with LDAP authentication.

  I have a cisco Asa5510 and windows Server 2008 R2

  I create the LDAP authentication.

  AAA-server LDAPGROUP protocol ldap
  AAA-server host 10.0.1.30 LDAPGROUP (inside)
  Server-port 389
  LDAP-base-dn dc = systems, dc = local
  LDAP-naming-attribute sAMAccountName
  LDAP-login-password *.
  LDAP-connection-dn CN = users, OU = users, DC = network, DC = local
  microsoft server type

  but when I test, I have an error (user account work directly to the server)

  AAA-authentication server LDAPGROUP host 10.0.1.30 userid password test *.

  INFO: Attempt to <10.0.1.30>IP address authentication test (timeout: 12 seconds)
  ERROR: Authentication rejected: not specified

  Help, please

  concerning

  Frédéric

  You have the account with username 'user' in ' 'reseaux.local' and "Utilisateurs.reseau.local '?"

  If so, can you check if they are two other AD domain? The bug pointed out that ASA do not support authentication via LDAP refererals multi-domain.

  You might consider to using an account administrator AD in "reseaus.local" for ASA to connect to AD.

• Recommendations for VPN authentication

  So, now that Cisco has helped me get the vpn works on my ASA 5525-X I need to use an active administrator for the authentication/grouping of customers for several profiles in anyconnect.

  My question is what is the simpler and more effective way of setting this up. I have a R2 2012 NAP server that is used to authenticate the AD users for access to the switches. But should I use that for ASA as well or can I use AD directly to the ASA?

  A reminder to those who have not seen my posts, I'm very new to the ASA and the need to get this up and running quickly... Any help/suggestions would be greatly appreciated.

  Thank you

  Stacey

  Hi Stacey,

  You can use the Windows Server direct to the ASA, it uses the LDAP protocol. You will need to implement the ASA like this:

  AAA-Server LDAP-SRV protocol ldap
  AAA-Server LDAP-SRV (inside) host XXXXXXXXX--> IP address of the server
  LDAP-base-dn DC = vpn, DC = also, DC = com--> where users are stored
  LDAP-connection-dn CN = ASA-LDAP-user, CN = Users, DC = vpn, DC = also, DC = com--> the entire AD tree.
  LDAP-login-password *--> the administrator password
  LDAP-naming-attribute sAMAccountName
  LDAP-scope subtree
  microsoft server type

  Now, you need to get the login DN: and the base dn. Now on the ad, you need to create several user groups and divide the users for different levels of authorization as: salespeople, employees...

  You can test the authentication by using this command:

  test the aaa server for authentication LDAP_SRV host XXXXXX username: password XXXXX: XXXX

  and then see if it fails, then you can solve the problem

  You can then configure the mapping of LDAP attributes to MAP a group of users on the server of advertising to a group policy on the SAA.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  I would like to know how it works!

  Please don't forget to rate and score as correct the helpful post!

  David Castro,

  Kind regards

• LDAP authentication problems

  Hello

  I am able to get the LDAP authentication works for the VPN, but when I go to test a user that is not defined in the VPN group in the ad, they are still able to authenticate and access to the VPN. I'm at a loss for what is the real problem, because everything seems to be set correctly.

  I joined newspapers in debugging ldap for a user that works properly and that a user that does not work properly. I think that they should be able to authenticate to a group JOB_ADMINS_VPN and if they are not in this group then they should be denied rights of VPN connection.

  LDAP attribute-map JOB_ADMIN_MAP

  name of the memberOf Group Policy map

  map-value memberOf CN = JOB_ADMINS_VPN, OU = VPN, DC = test, dc = net JOB_ADMINS

  AAA-server JOB_ADMINS protocol ldap

  AAA-server JOB_ADMINS (Prod) 10.5.1.11

  LDAP-base-dn DC = test, DC = net

  OR LDAP-group-base dn = VPN, DC = test, DC = net

  LDAP-scope subtree

  LDAP-naming-attribute sAMAccountName

  LDAP-login-password *.

  LDAP-connection-dn CN = saVPNLDAP, CN = Users, DC = test, DC = net

  microsoft server type

  LDAP-attribute-map JOB_ADMIN_MAP

  I don't know miss me something small, but I don't know what I'm missing. Any contributions to this number will be grately apperciated.

  Thank you!

  Please review the below listed config and see what hand you lack of other "sh run" of the SAA.

  Configuration to limit access to a particular group of windows on AD

  internal group noaccess strategy

  attributes of the strategy group noaccess

  VPN - connections 1

  address pools no

  LDAP LDAP of attribute-map-MAP

  name of the memberOf IETF-Radius-class card

  map-value memberOf

  AAA-Server LDAP-AD ldap Protocol

  AAA-Server LDAP-AD

  Server-port 389

  LDAP-base-dn

  LDAP-scope subtree

  LDAP-naming-attribute sAMAccountName

  LDAP-connection-dn

  LDAP-login-password

  microsoft server type

  LDAP-attribute-map LDAP-map

  Group Policy internal

  attributes of group policy

  VPN - connections 3

  Protocol-tunnel-VPN IPSec l2tp ipsec...

  value of address pools

  .....

  .....

  type of tunnel-group-remote access

  global-tunnel-group attributes

  Group-AD-LDAP authentication server

  NoAccess by default-group-policy

  !

  !

  attributes of the strategy group noaccess

  VPN - concurrent connections 0

  Jatin kone

  -Does the rate of useful messages-

• VCSC &amp; VCSE: device/user using LDAP authentication

  Hi all

  I configured the VCSC and VCSE for device authentication and the user using LDAP. The issue that I face is my Zone of course does not have connection to VCSE. I am sure that my LDAP works very well because everything works perfectyle (authentication of users, for example) with the exception of this. Status I got STRANDED on the page of the area traversed in VCS C.

  Has anyone encountered the same problem?

  It's not a problem, it's the behaviour, as the crossing area also uses authentication, then

  It will not use the local db but using your ldap server.

  You create an additional account with the user name used on the VCS that reflects the

  SIPIdentityUserName / h235IdentityEndpointID and the password as well.

  Works very well for us.

• Change of password for custom changes

  Hi all
  
  Please help me
  
  http://obieegyan.blogspot.com/2012/06/write-back-in-OBIEE-10G.html
  
  We have implemented the feature to write back to OBIEE10g (change password for the external authentication table) using the link above.
  
  The problem is that we wanted to confirm the above password dialog box. Once the password is entered we wanted to confirm password
  
  Would you please help me to write custom java script or any other approach to solve my problem.
  
  Please help me it is very urgent
  
  Thank you
  NK

  Since you are using 10g I suggest to write of the JSP code to change the user password and place it in the place
  \OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics
  So that you can the page using url
  http://localhost:9704/Analytics/.jsp

  If it helps mark :)