VCSC & VCSE: device/user using LDAP authentication

Similar Questions

• Default password for LDAP sync accounts that do not use LDAP authentication

  We use CUCM 10.5.1.  We have enabled LDAP and installation directories.  I can see the previous local users and new users sync ldap.  I know that if there was a previous local user with the same user as the new ldap user ID, this account is converted into an ldap account and I guess the password stay the same before ldap integration.   But what of the new ldap sync protocol accounts?  I see that there is a field of password for them, but what is the default password for these newly created accounts and where I can edit this default password?

  I do not have a 10.x here, but on previous versions, "credentials political default" sets the default password.

  It was under the management/diploma default user policy. Choose the 'end user' political 'password' and put the default value you want here. It may be in a slightly different place from 10.x

  Aaron

• Card reader chip as a pass through for VMware View 5.1 device (NOT USED for AUTHENTICATION)

  I try to get a USB Smart Card Reader * to work on related under VMware View 5.1 clones

  * not as an authentication device, just like a transmission of smart card reader

  Not tried:

  1 activated pass through card reader in the registry for the VMware view client

  2. active "allow redirection of card reader" in the policy active directory

  3. customer connected to view, selected USB drive list, connected to the customer

  After that, the card reader will appear with a "generic smart card", but it does not actually work.

  We executed the diagnosis of the smart card and he pointed out that the drivers are ok and windows service is ok, but the map can not be found.

  PS: When we tried first, about 2 weeks ago it worked, but it has suddenly stopped working. (Needless to say that the virtual machines and the Clients were restarted several times).

  Check that you have not installed the "PCoIP smart card Redirection" option during the installation of the agent. If it is present, it will redirect calls made RDP client smart card. Because you use a 'local' to the desktop USB drive, you don't want to do.

• Impossible to connect with users using LDAP

  Hello guys

  We recently did a new install of 11.7 OBIEE

  When you configure the protocol ldap everything works fine, I can see the LDAP users and most of the users can connect to the front with the correct permissions.

  Some LDAP users are unable to log on for some strange reason, I don't know the user name and password of the user is correct because the same user can connect to our old environment but not our new.

  Someone knows this problem before?

  Concerning

  Benoit

  Have you tried with the user at the bottom and top case id?

• ACS 5.2 - authentication user 802. 1 x and MSCHAPv2 using LDAP Source identity

  Hello community,

  I use the ACS 5.2 as the solution of authentication in my network. I configured two situations: access with network access policies and peripheral Administration.

  Currently, I have a few configured devices: 1 ASA (using RADIUS), WLC-5508 (using RADIUS) 1, 1 2960 S (with GANYMEDE +). And I set up an external identity store, using LDAP (I can see and select all groups without problem).

  Everything works fine. My next step was to configure users to use 802. 1 x to authenticate using ACS with my LDAP database.

  Assuming that all configurations are correct on all computers (when I use an internal database works very well), these are the following newspapers/configurations in the ACS:

  

  

  

  

  At this point, we can see the error:

  22043 current identity store does not support the authentication method; He jumps.

  Header 1

  Request for access received RADIUS 11001 11017 RADIUS creates a new session Assess Service selection strategy 15004 Matched rule Access Service - access Police selected 15012 11507 extract EAP-response/identity 12500 prepared EAP-request with EAP - TLS with challenge 11006 returned Challenge RADIUS access Request for access received RADIUS 11001 11018 RADIUS re - use an existing session 12301 extract EAP-response/NAK asking instead to use PEAP 12300 prepared EAP-request with PEAP with challenge 11006 returned Challenge RADIUS access Request for access received RADIUS 11001 11018 RADIUS re - use an existing session 12302 extracted EAP-response containing PEAP challenge-response and accepting as negotiated PEAP 12318 has successfully PEAP version 0 12800 first extract TLS record; TLS handshake has begun. 12805 extracted TLS ClientHello message. 12806 prepared TLS ServerHello message. 12807 prepared the TLS certificate message. 12810 prepared TLS ServerDone message. prepared 12305 EAP-request another challenge PEAP 11006 returned Challenge RADIUS access Request for access received RADIUS 11001 11018 RADIUS re - use an existing session 12304 extract EAP-response containing PEAP stimulus / response 12318 has successfully PEAP version 0 12812 extracted TLS ClientKeyExchange message. 12804 message retrieved over TLS. 12801 prepared TLS ChangeCipherSpec message. 12802 prepared TLS completed message. 12816 TLS handshake succeeded.

  12310 full handshake PEAP completed successfully
  prepared 12305 EAP-request another challenge PEAP
  11006 returned Challenge RADIUS access
  Request for access received RADIUS 11001
  11018 RADIUS re - use an existing session
  12304 extract EAP-response containing PEAP stimulus / response

  12313 PEAP inner method started

  11521 prepared EAP-request/identity for inner EAP method
  prepared 12305 EAP-request another challenge PEAP
  11006 returned Challenge RADIUS access
  Request for access received RADIUS 11001
  11018 RADIUS re - use an existing session
  12304 extract EAP-response containing PEAP stimulus / response
  11522 extract EAP-Response/Identity for EAP method internal
  11806 prepared EAP-internal method call offering EAP-MSCHAP VERSION challenge
  prepared 12305 EAP-request another challenge PEAP
  11006 returned Challenge RADIUS access
  Request for access received RADIUS 11001
  11018 RADIUS re - use an existing session
  12304 extract EAP-response containing PEAP stimulus / response
  11808 extracted EAP-response containing EAP - MSCHAP VERSION challenge response to the internal method and accepting of EAP - MSCHAP VERSION such as negotiated

  Evaluate the politics of identity

  15006 set default mapping rule

  15013 selected identity store-

  22043 current identity store does not support the authentication method; He jumps.
  22056 object was not found in the identity of the point of sale.
  22058 advanced option that is configured for a unknown user is used.
  22061 the option 'Refuse' Advanced is set in the case of a request for authentication has failed.
  11815 inner EAP-MSCHAP VERSION authentication failed
  11520 prepared EAP-failure of the inner EAP method
  22028 authentication failed and advanced options are ignored.
  prepared 12305 EAP-request another challenge PEAP
  11006 returned Challenge RADIUS access
  Request for access received RADIUS 11001
  11018 RADIUS re - use an existing session
  12304 extract EAP-response containing PEAP stimulus / response

  Authentication PEAP 12307 failure

  11504 prepared EAP-failure

  11003 returned RADIUS Access-Reject

  So, what can be the cause? Compatibility with LDAP?

  Plinio,

  Watch this doc,

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/eap_pap_phase.html#wp1014889

  There is a table which indicates that LDAP is not a database compatible with our EAP type (MSCHAP VERSION-2).

  LDAP, you can use with TLS, PEAP-GTC, and EAP-FAST-GTC.

  TLS uses certificates on both sides, suplicant, and server authentication server.

  * GCT if I'm not mistaken is a WBS system to use with the EAP protocol.

  Authentication Protocol EAP compatibility of database user and table B-5

  Identity store	EAP - MD5	EAP-TLS 1	PEAP-EAP-MSCHAPv2	EAP-FAST MSCHAPv2	PEAP-GTC	EAP-FAST-GTC
  ACS	Yes	Yes2	Yes	Yes	Yes	Yes
  Windows AD	NO.	Yes	Yes	Yes	Yes	Yes
  LDAP	NO.	Yes	NO.	NO.	Yes	Yes
  RSA identity store	NO.	NO.	NO.	NO.	Yes	Yes

  Identity of DEPARTMENT store

  NO.

  NO.

  NO.

  NO.

  Yes

  Yes

• AnyConnect user using the user certificate authentication and LDAP authentication

  Hello

  I'm trying to implement the Anyconnect VPN for my office. Now, I want the user to authenticate the user certificate based (which is install user local system are we) CN value and LDAP authentication. A help how to achieve this requirement. We install Certificate ROOT and INTERMEDIATE Godaddy and even already installed ASA. Also, we have the user certificate installed on each system user to authenticate the user.

  Any help please.

  Hi subhasisdutta,

  This link will certainly help you with the configuration:

  http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

  Hope this info helps!

  Note If you help!

  -JP-

• Double authentication using LDAP and RSA

  I would use LDAP and RSA (double authentication) for my SSL VPN clients.  Can I authenticated users if my logon page requires users to enter a second username.  If I have the configuration so that they have to enter their username once, no authentication attempt is passed on to the authentication servers.  I'm under debug on LDAP and RADIUS (for RSA), which is what I know that authentication is never over if they are to enter their user name once on the login page.

  If I don't specify "use-primary-username" at the end of the 'secondary-authentication-server-group' command, users must enter their username twice and the authentication is successful.

  Does anyone know how to configure the ASA so that they have to enter their username once while using the LDAP (as principal) and RSA (RADIUS) (secondary)?

  Thanks in advance.

  Matt

  Hi Matt,

  I just tried on 8.3 (2) and it works as expected. I suspect that you are running in this bug:

  CSCte66568    Double authentication broken in 8.2.2 during use-primary-username is CONF.

  If you are running 8.2, upgrade to 8.2 (3) and you shoud be fine.

  HTH

  Herbert

• For Cloud SGD LDAP authentication for users and administrators

  Hello.

  I recently completed the installation of my new cloud of SGD 12.1.0.3 on Linux 6.4 (on a virtual machine).

  My question is if it is possible (and how) to enable authentication for new administrator SGD through LDAP accounts?

  We have already our VM hosts configured to allow LDAP authentication to theirs, but how to configure WHO to enable LDAP authentication even as users of server?  Because users are in LDAP, they do not have a local account on the servers, and we do not necessarily want users of WHO in order to connect the servers anyway.

  One of the objectives to use LDAP is that we want to allow users to have only to change their domain/LDAP password and everything else is updated.

  I see that when an account is created in the OMS, the user is created in the repository of OMS database.  I really want to restrict not know them to log directly in the database, but do how this is possible.  Can we still use pupbld for this?  Probably not...

  I read the book below the Oracle documentation, but it is for SGD 11.1 and I'm under 12.1.

  But the same year, he was not very descriptive about how to set up.

  It sounds almost as if you had to take the decision to use LDAP for the installation of beginning of WHO.

  I hope not, and I do not remember that as an option that I have installed the SGD.

  Configuration of Oracle Enterprise repository to use external authentication tools - 11 g Release 1 (11.1.1.7)

  Yes, you can still integrate with LDAP.   Please see the documentation here

  http://docs.Oracle.com/CD/E24628_01/doc.121/e36415/sec_features.htm#CJAGHGAH

  EM use WLS for authentication, so everything that is supported by this version of WLS will work.  Documentation received instructions for OAM/OID/HAD and Active Directory are specified.

  Users can be changed to type external if they are already created in the repository with the appropriate connection name.   Otherwise, new users can be created.

  Also be sure to examine the external roles option, which allows you to map a LDAP group to an external role in EM by using the same name and automatically assigning the privileges required by this group.

• Use an authentication process after with LDAP

  I am new to APEX decently and have implemented the LDAP authentication for my application. It works as expected.  However, because of our training guidelines, no one can access the application without the proper training.  I have a table in the database for users who will be managed by the owner of the system once the development is complete and each user has an ACTIVE field which can be displayed/hidden.  I need a procedure after authentication which checks the field ASSETS in the table USE to ensure that it returns TRUE before give us them access to the application.  Any help would be greatly appreciated!

  Request Express 4.2.1.00.08

  DECLARE

  number of l_is_active;

  l_return boolean;

  BEGIN

  Select count (*)

  in l_is_active

  the user

  where ldap_id =: P101_USER_ID

  and active = 't';

  IF l_is_active > 0 THEN

  l_return: = TRUE;

  ON THE OTHER

  l_return: = FALSE;

  END IF;

  END;

  Hello

  It is certainly possible to put this code in the audit function, but the result may not be what you expect. This function runs on every request, as an additional Sentinel who checks whether the session can be used by the APEX. If it returns false, APEX creates a new session and redirects you to the page of invalid session (i.e. the connection). I think that it is better to create a permission based on the above query and activate this permission at the application level (in the security of the application tab). If authorization fails after the connection, APEX permission error message displays, where you can explain why access is not allowed.

  Kind regards

  Christian

• Security using ldap and the RPD users

  Hello
  
  I need 5 dummy users in RPD. I don't want to give them adminstrator privileges because they are not allowed to see everything in my dashboard. My authentication works by using an LDAP server, is it possible that I can leave these fake users login as well as those on the LDAP server?

  I don't think it's possible to use the default Server BI and LDAP authentication. You can still have multiple LDAP servers for authentication. You can ask 5 service accounts to be created in the LDAP for OBIEE Protocol and assign privileges accordingly so they see only needed dashboards.

  Please allow the useful points,

  Thank you
  -Laurence.

• Change the role of the user once authenticated LDAP authentication

  Hi forum,
  
  I do know that if it is possible, I have not found a solution so far
  
  I have a simple web application with LDAP authentication. We would like to use LDAP for authentication and store the information of user roles in the database. After authentication, LDAP assigns the role of "guest" to the user and the home page (the only page available for this role) is displayed.
  
  In this home page, the user must select a profile (the same user can have multiple profiles) in a list retrieved from the database. The profile of each user has an associated role. After selection, we want to change the role of the user "guest" to the role associated with the selected profile.
  
  I don't think that implementation of a custom plug-in fits my needs because the role assignment requires the participation of the user.
  
  Any suggestions?
  
  Thanks in advance,
  
  Tatiana.

  Hello

  Well, the problem is that you need to change the subject of the user authenticated, who's a JAAS thing to do. The only way this can work is indeed use a custom LoginModule and then access the user object to add a security principal that represents the role you want to add.

  Frank

• El Capitan LDAP authentication

  I am trying to setup on El Capitan Macbook LDAP authentication. I've prepared OpenLDAP server on the Linux host with the necessary users. This LDAP was added in the directory as LDAPv3 with set of mappings of RFC2307 utility.

  Computer can connect to LDAP, because green circle seen in there:

  Users and groups > connection options > network server account > hostname of the LDAP server

  The problem is that the user is unable to connect by using LDAP. No matter what I go to the login prompt (including complete DN), I can see say journal entry:

  SecurityAgent: Unknown user 'adrian' connection attempt SPENT for the audit.

  How can I review more about connection?

  So that the own Apple Open Directory is based on OpenLDAP, it is not the same. Not only do you have conveniently add additional entries to OpenLDAP i.e. Apple own LDAP schema, but you also need to configure Kerberos on the Linux server as well as Open Directory uses a combination of LDAP and Kerberos for authentication.

  In my view, it is possible to do all the extra steps to get a Linux server to fully act as the equivalent of an Open Directory server, but that you're barely at half way.

  See - http://deepport.net/archives/setting-up-a-linux-server-for-os-x-clients/

  and - http://www.torriefamily.org/~torriem/wiki/computer_stuff:opendir_and_ldap

  These articles do not cover Kerberos, but perhaps of additional useful information for the previous link.

  See - http://blog.michael.kuron-germany.de/2009/04/building-your-own-opendirectory-ser ver-on-linux /

  and - http://cs.unk.edu/~zhengaw/projects/openldap-server/

• Fabric connecting LDAP authentication

  Hi guys,.

  I am running 2.0(2q) UCSM

  I was wondering if there was a way of configuring LDAP authentication by logging in via SSH to the FIs?

  I installed all group mappings and adds users to these groups without any problems, but I can't seem to figure out how to get LDAP for authentication when you use a session SSH on the FI.

  Someone at - he put in place before?

  Thank you

  Doug,

  Are you sure you are using the correct syntax when connecting via CLI?

  If AD authentication works through the GUI, it should work in CLI.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/CLI/config/Guide/2.0/b_UCSM_CLI_Configuration_Guide_2_0.PDF

  

  Kind regards

  Robert

• Local use and authentication AD with ACS 5.6

  I have an ACS 5.6 unit configured to use AD authentication for my default network access and rules. It works very well.

  I tried to implement some features, put them in a group and give only locally defined ACS to users access to these devices.

  Problem, after you have created the local accounts on ACS creates a group of local identity, and trying to authenticate with a camera, I always get "object not found in the identity store.

  Is there a way to have the hybrid authentication like that? How do we?

  Hi Colin,

  One thing that comes to mind is "sequence of identity store. Ensure that you have "internal users" listed in there otherwise that demand would never be mapped against the internal users.

  I also want to double check the source of identity under default device admin or any service that you created. Ensure that internal users.

  Take a look at the document below for more details on the identity store sequence.

  https://supportforums.Cisco.com/document/103901/ACS-5x-identity-store-se...

  Kind regards

  Kanwal

  Note: Please check if they are useful.

• LDAP authentication on vty router login

  I'm trying to deploy authentication ldap (AD MS) for a connection vty router. I used the manual like this - http://www.cisco.com/en/US/docs/ios-xml/ios/sec_usr_ldap/configuration/15-2mt/sec_conf_ldap.html

  But my scenario was unlucky

  My config is...

  _____

  AAA new-model

  !

  !

  AAA server ldap ad1 group

  test server

  !

  AAA authentication login default group local ad1

  AAA authorization exec default authenticated if

  !

  jump...

  !

  map1 LDAP attribute-map

  user name of card type sAMAccountName

  !

  test LDAP server

  IPv4 172.16.107.145

  attribute map map1

  Retransmission Timeout 20

  bind authenticates root-dn CN = Administrator, CN = users, DC = fabrikam, dc = com password 7 02050D 480809

  base-dn CN = users, DC = fabrikam, dc = com

  _____

  instead of "ldap attribute-map map1" I tried to use "search user-object-type-filter name. No effect

  I used wireshark for sniffer of cisco to AD packages. No package at the port of AD (389 or 3268) have been captured.

  I used the ldap debugging all the

  This is the output

  * Jun 9 19:38:45.414: LDAP: LDAP: AAA Queuing 117 of treatment application

  * Jun 9 19:38:45.414: LDAP: received the queue event, new demand for AAA

  * Jun 9 19:38:45.414: LDAP: LDAP authentication request

  * Jun 9 19:38:45.414: LDAP: no attributes to check username mental health

  * Jun 9 19:38:45.414: LDAP: name of user/password validation test failed!

  * Jun 9 19:38:45.414: LDAP: LDAP not suport interactive logon

  Note the last string. Is that what it means I can't use ldap for this?

  What I've done wrong?

  I am grateful for!

  LDAP on IOS support is limited to the VPN authentication and unfortunately cannot be used for authentication of the Admin (exec).

  CSCug65194    Document nonsupport LDAP for authentication of connection

  AAA does not support using a LDAP method for interactive logon authentication. Customers can configure 'aaa authentication login default group ldap', but when an interactive session (Terminal) attempts to authenticate via the LDAP protocol, the

  following message is syslogged:

  "LDAP: LDAP does not support interactive logon [sic]."

  This is due to the aaa/ldap/src/ldap_main.c of next record ldap_authen_req():

  If (intf & intf-> ATS) {}

  LDAP_EVENT ("LDAP don't suport interactive logon");

  ldap_method_failover (proto_req);

  Jatin kone
  -Does the rate of useful messages-