OBIEE 11 g and in-memory options

Similar Questions

• What is the number of processors and maximum memory options in MSCONFIG?

  MSCONFIG (START)... Who can tell me what that? !!
   
  http://www.HTPC-reviews.com/wp-content/uploads/2012/08/speedup_windows7.jpg

  This photo... It's the MSCONFIG window

  64-bit Windows 7

  who can tell me what is 'exactly' the real role of:

  -Number of processors
  -Maximum memory

  because

  I have i7 with 8 processors and when I chose (number of processors) 8 processors, that nothing has changed! It's same as 0.
  and I have 6 GB of ram and when I chose (maximum memory) = 6 GB, nothing has changed, but became 5 GB in the Task Manager!

  What is - c!

  can someone help me please!

   
  Hello
   
  These options to limit the use of processors and memory to the specified value. If you want windows to use all available processors and memory, you must leave two options not controlled.
  When the number of processors option is set to zero, Windows will use all available processors.
  If you recently changed the processors, this may help: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/howto-get-windows-7-to-detect-your-new-multi-core/71519d51-f6cb-47df-b3ff-66c2928d6de4
   
   

  Hope this information is useful.

• Re: Satellite P200d-12U and 4GB memory upgrade

  Hello

  I was given a Satellite P200-12U with 2 GB of friend of a friend and asked to be upgraded to 4 GB.
  Have purchased and installed the memory, but noticed BIOS and still only registered WINDOWs 2GB.
  Then went into BIOS

  JASAA BIOS V1.40

  and I noticed that the options are usually very limited, and that memory is indicated but not selectable.

  Do I have reason to think that this machine is limited to 2 GB? And may refer the 4 GB to the shop?

  Thanks for any information.

  Hello

  Can you please send the exact model name?
  Subject and then validation you wrote about two different laptop models.

  Satellite P200D-12U or Satellite P200-12U?

• Reference Dell will not load xp. Info Tech 0x000000c2 (0 x 00000043, 0xDFB25000, 0 x 00000000, 0 x 00000000) tells me to disable the BIOS memory options

  Info Tech 0x000000c2 (0 x 00000043, 0xDFB25000, 0 x 00000000, 0 x 00000000) system search floppy witch, I did not. Cannot start in safe mode that is blue screen tells me to disable the BIOS memory options, but finding where to.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the full and exact error message on blue screen?

  In response to the questions above could help us help you better.

  If the system restarts after blue screen then use disable automatic restart on system failure option to stop automatic reboot.

  Here's how:

  1. turn on your computer and keep pressing the F8 key before Windows starts.
  2. now in the Advanced Boot Options, select disable automatic system failure reboot

• The Oracle 12 c memory option works with external tables?

  Hello

  Does anyone know if the external tables are also candidates for the benefit of the Oracle 12 c option in memory? I have read the documentation and white papers, and can't find any reference to external tables. If it is possible, we are very interested to know all about her, especially any limitation.

  Thank you.

  This is not the right forum for this question; This forum is for the memory of TimesTen database not Oracle database in memory option. These are completely different things.

  But it happens that I can tell you that no, external tables are not candidates for use with the In-Memory Option.

  Chris

• Does not start, need more and more memory, then crashes. It is SOLVED by deleting DB, panacea.dat, foldertree.json CAUSE global messages: uknown

  As a user of Thunderbird long term (currently version 38.2.0 on Win7 x 86 US) today, I caught myself (negatively) by the following problem: at the launch at the start of Thunderbird, the window will appear last closed (and for a short while, I see my files, etc., as left behind, during the last closure of Thunderbird), but then it turns into State "Not responding" (nothing works). When we look in the Task Manager, I see that Thunderbird seizes more and more memory, before this date - after a few seconds - crashing. I really hope that for some help fast, if possible (I desperately need a solution for e-mail job well - ideally the one I had, i.e. Thunderbird with my settings).

  What I tried:
  -Uninstall Thunderbird and install it again (did not help)
  -Uninstall Thunderbird and install an older version (I tried 38.1.0, 38.0.2, and 31.8.0 - nothing has worked)
  -from Thunderbird in SafeMode (same problem)
  -from Thunderbird in safe mode of Windows (same problem)
  -from Thunderbird in offline mode (did not help)

  My main question to know how to solve this problem, includes questions such as
  ? Should I try to delete some files of Thunderbird and try again (which ones?)?
  ? Can I use a command line "tricks" to get Thunderbird started?
  Etc.

  Thanks for your help!

  I think I solved my problem: delete messages from global reach DB and panacea.dat foldertree.json helped - once Thunderbird started again interactively and now I can restore my data files/messages.

• Can not good press the mouse on the name of the file and get the option of e-mail

  Can not good press the mouse on the name of the file and get the option of e-mail

  Hello! If I understand your question, you want to right-click on a file and attach it in Mail. To do this, click on the file with two fingers on the touchpad, or control + click on the file, select 'Share', then 'mail '.

  I hope this helps!

• I tried to disable "remember passwords for sites" option, but when I exit Firefox and returned, the option is enabled. The solutions page do not help.

  It is a general problem I have with the saving options. It only started a few days ago.

  I lived it in 37.0.2 and 38.0.5.

  Help page https://support.mozilla.org/en-US/kb/how-to-fix-preferences-wont-save

  contains several solutions. I tried them all and they do not work.
  Please notify.

  The two suggested solutions were things that I had already tried without success.

  Finally, what works after much trial and error:
  1 back up all my favorites.
  2 uninstall Firefox.
  3 reinstall Firefox but important! not begin immediately after installation!
  4. run firefox.exe Pei from the command window.
  5. in the Profile Manager, delete all the existing profiles and create a new.
  6. start Firefox, import bookmarks and set the options.

  The options will now be saved!

• Can't see the cover and apple pay option?

  I restored my iPhone 6s of iphone6, after that I cannot see the option pay apple in my wallet but also can not see in the portfolio and apple pay option in the settings. But when I am trying to reset as a new iPhone I see these option as well as I can add debit card or credit card to pay for apple... Can help you with this question as soon as POSSIBLE please... ?... Looking forward to your help in this matter...

  Hello

  Tap the application portfolio and then slide up and down on your screen. You should see a circle with a higher right.

  Tap here then click Next and follow the instructions.

  Please click here > http://www.apple.com/apple-pay/

  Then scroll down to: Setup is simple with portfolio.

  You will see the circle with a sign + on the right.

• Using Firefox 15 windows 7 and Google search option, how can I have the search results bar open in a new tab?

  I tried the Google link in the other responses and selected the option 'open results in a new window. When I save the settings, I get an error message: "the/in-US/questions/764917 requested URL? s = open + google + search + bar + results + in + new + tab & r = 8 & as = s was not found on this server. »

  Both work thank you!

• Satellite L755 - 16L gives the blue screen and physical memory dump

  Please advice

  I bought my L755 - 16L in the month of August.
  Until last week it went very well.

  Last week I'm going to visit another country he only has the 240V voltage.
  Normally at home, I use 100V power supply for my laptop.
  After my return when I connect top of laptop and the go blue screen screen work and grant discharge mini information of physical memory.

  Usually, I unplug the charger after the judgment.
  The next day if I start the computer, the computer gives the blue screen and physical memory dump.
  If not unplug the charger after stop down and don't use the next day then no problem.
  Please advice what can I do to stop this problem.

  This is the report of errors in Event Viewer.

  "The system has rebooted without judgment properly first. "This error can be caused if the system unresponsive, crashed or unexpected power loss.
  System

  -Supplier

  [Name] Microsoft-Windows-Kernel-Power
  [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

  Event ID 41

  Version 2

  Level 1

  Task 63

  Opcode 0

  Keywords 0 x 8000000000000002

  -TimeCreated

  [SystemTime] 2011-11 - 27 T 10: 43:19.248036500Z

  EventRecordID 48763

  Correlation

  -Execution

  [ProcessID] 4
  [ThreadID] 8

  Channel system

  Computer toshiba-TOSH

  -Security

  [User name] S-1-5-18

  -EventData

  BugcheckCode 30
  BugcheckParameter1 0xffffffffc0000005
  BugcheckParameter2 0xfffff80003717ce5
  BugcheckParameter3 0x0
  BugcheckParameter4 0xffffffffffffffff
  Fake SleepInProgress
  PowerButtonTimestamp 0

  Hello

  In general the BSOD is the product of the problem of hardware or software problem. To check if it of software or hardware associated with deliver its necessary to reinstall the OS and check if the BSOD will appear using the new OS preinstalled.
  Of course, it s painful to do that because the recovery procedure would format the HARD drive and therefore the data backup is necessary!

  I don t think that the different input voltage might affect the functionality of the laptop computer because the laptop uses the universal adapter that supports entry 100V-240V.

  BSOD can be caused by faulty memory modules so I think that this test of memory could be useful also

• Camileo S10 - Arcsoft doesn't recognize not all files on SD card and internal memory

  I just bought a Camileo s10 camcoder.
  So far, I was pleased with the product until I connected it to my pc (vista compatible with recommendations).

  I installed the Arcsoft software, but I've never had any file import because * the program recognized the sd and internal memory as void * (I could read the files in the drive of the camera, as well as my pc card reader).

  I have used other similar suites with no luck. Then I tried to format sd hc 8 GB card and restore my files but unfortunately I noticed * video/foto files not recognized at the time, even from the camera *.

  Another concern is that I had a trailer (720 p) hd .mov file in my memory card and the camera could not see (+ I wanted to use the camcorder as a player HD plugged into my sony full hd tv +).

  I looked for answers almost anywhere, but so far I have had no response

  Hello nikfam,

  I also have a S10 Camielo, installed the software Arcsoft on Windows Vista and I am able to see images and mov files if I connect the cam via usb cable or if I insert the sd card into the card reader.
  He shows me the internal memory and the data stored on the card (Class6) 8 GB SDHC.

  Maybe you need a card with a higher class. Where did you try to format the sd card? On the inside of the camera or on your pc?
  Please take a look at the right format.

  Have you tried another usb port? If you use a hub, check that there is enough power.
  I downloaded both trailers 720 p and saved on my sd card but my S10 couldn t see too.

  welcome them

• Analyze both sides (front and back) missing option

  I have an e-all-in-one printer HP Officejet Pro 8600 - N911a (CM749A).

  On Windows 7, the HP scanning software has an option to scan both sides (duplex), when you use the automatic document feeder.

  But I am a Mac user and in the scanner HP for Mac software, this option is missing. Why?

  It is really useful. I wish I had this option on Mac. Or is it there? Thank you.

  

  Hello

  Duplex (two sided) is compatible with OS X using the scanner HP for OSX software

  If you haven't done so already, download the full driver HP package for the HP Officjet 8600-hp.com

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107214-1&cc=us&DLC=en&LC=en&OS=219&product=4323648&sw_lang=

  When you install, in the first few install screens and the Installation Options screen, be sure to select "Software recommended by HP" - then the HP scanning software will settle.

  (Note - Minimum install is the default, and this only installs the utility driver printing and files to support ICA scanning Preview/ImageCapture, that do not support the two faces of scanning).

  After installing sw, go to Applications / Hewlett Packard folder and launch application from HP.

  Open the< to="" view="" the="" detailed="" dialog="" box="" view.=""  choose="" document="" as="" the="" "type"="" and="" you'll="" see="" the="" option="" to="" select="" 'scan="" both="" sides="" of="" pages'="" at="" the="" bottom="" of="" the="" dialog="">

  works for me, hope this helps

• The Hibernate and stand by options appear is no longer in the shutdown options

  original title: on my turn out of the computer screen the options used to be Hibernate, standby, turn off and restart. The Hibernate and stand by options are not there any longer.where are they?

  the standby and hibernation options are dimmed, not black.

  the standby and hibernation options are dimmed, not black.

  This could be the result of a simple adjustment in your power configuration settings. Follow instructions on the link below to diagnose the problem.

  http://www.PCWorld.com/article/205562/no_sleep_no_standby_no_hibernation.html

• As of today, I entered a withdrawal check in Microsoft Money and used the option print. It doesn't then gives the option 'Print cheques' as he has always in the past. How do I print the failure?

  Today, I went in a transaction of withdrawal in Microsoft Money 2005 and used the option 'print '. It does not have the option 'Print cheques' as he has always in the past. How to print the check now?

  Support for MS Money ended on January 31, 2011...

  01/31/2011: the end is near! If you have not already meditated it, now may be a good time to start... (01-jan - 11 & ff)
  http://social.Microsoft.com/forums/en/money/thread/2a40ad46-2258-4637-8941-9a1dc9a624aa

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You will find support remaining (as it is) for MS Money in this forum: http://social.microsoft.com/Forums/en/money/threads