OBIEE 11G - how to find automatically physical table using a report

Similar Questions

• How to find all the table names in all modules in EBS R12?

  How to find all the table names of all the modules in EBS R12?

  In addition, you can go to http://etrm.oracle.com, you select the version of the EBS, select "FND Data" or "S/n data", select the Type of the object TABLE and you will get all the tables of EBS in module.

• How to mark the physical tables as "cacheable"

  Hi all
  
  Can someone tell me please how to mark the physical tables as "cacheable".
  
  Thnaks a lot

  You can make cacheable table by clicking twice on the table or go to the properties of the table. You can designate specific time duration for the year, month, days need to keep cacheable. Remember do this on the base tables will affect all alias tables.

  Thank you
  Amol

• How the identity if one table used only by synonyms and not by any other subprogrammes in a schema?

  Hi people

  How the identity if one table used only by synonyms and not by any other subprogrammes within a schema. I see in the TOAD describe objects tab used by, but I would like to identify hundreds of table so I would like to know if there would be any SQL or Meta Data Tables?

  How the identity if one table used only by synonyms and not by any other subprogrammes within a schema. I see in the TOAD describe objects tab used by, but I would like to identify hundreds of table so I would like to know if there would be any SQL or Meta Data Tables?

  The ALL_DEPENDENCIES view has hierarchical information based on object_id

  The view object has the object_type.

  Create a hierarchical query on the first view and attach it to the second view.

  Or you can use the utldtree.sql file in the installation of the DB admin folder. Comments initially show you how a hierarchical query based on the object type.

• How to find if a table exists in a particular backup?

  Hi Experts,

  How to find if a particular table exists in a specific export dump file? and also is it possible to find the same RMAN backup?

  Thank you

  Hello

  Sorry, above is not possible. My bad,

  You can use below,

  Impdp directory = 'EXPDP"dumpfile = scott.dmp sqlfile = happy test.sql = metadata_only

  and the test.sql contain instructions ddl for tables in the dumpfile.

  Tested on 11.2.0.4

• How to find level locks table

  Oracle APPS R12
  
  Hi all
  
  How to determine the table level locks in oracle Apps R12. When I run my simultaneous program its taking too much time to complete, and two or three concurrent programs are running in parallel and taking the same base table data, so how to find the locks if it is on the table. Any help is highly appricatable.
  
  
  Thanks and greetings
  Srikkanth.M

  Hello

  How to determine the table level locks in oracle Apps R12.

  Please see old similar threads.

  Table locks
  http://forums.Oracle.com/forums/search.jspa?threadID=&q=table+locks&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

  When I run my simultaneous program its taking too much time to complete, and two or three concurrent programs are running in parallel and to the same base table data

  Are these concurrent programs custom or seeded? You're correctly concurrent managers? Please see these documents for more details.

  A comprehensive approach to the performance of Oracle Applications systems [ID 69565.1]
  What is the size of "Cache" recommended for a Manager Standard [ID 986228.1]
  Troubleshooting problems of performance in the Oracle Applications / E-Business Suite [ID 117648.1]

  Thank you
  Hussein

• How to find the ADF version used in a deployment archive?

  Hello
  
  When I get an ear/war file from a developer I want to deploy on a Weblogic Server it would be nice to be able to verify that the ADF version developers used is the same that is installed on the server.
  
  I tried to look at different deployment files but I can't find anything about it. Can anyone help?
  
  I can see the JSF version but noting on ADF.
  
  What about Peter

  I see your problem but do not see how you can get the information of just the EAR file as long as it is not put there by purpose. The required information is part of the jars that are installed on the servers. They are not part of the ear, but are only referenced.

  For the server side, I've written a web service that I install on each server (managed server that runs to the ADF, run time). This service at least tell me the version installed on the server. You can find the service including the source to my blog http://tompeez.wordpress.com/2012/02/05/adf-how-to-find-out-which-adf-version-is-installed-on-a-manged-weblogic-server/.

  There was a discussion on this forum and the ADFEMG google Group discuss how to know what the newer version (from sources of a project) was used to develop the App. Unfortunately, today you can't get a definitive answer to this. There is an ER out for it to allow in the future (http://java.net/jira/browse/ADFEMG-70).

  Timo

• How do I know a table used in the packeges or procedures

  Dear all
  How can I know that a table uses in any packege or procedure or function?
  I mean, let's say I have 10 packages, procedures of 10 and 5 functions.
  I need to know where the packages, procedures or functions using the EMP table.
  
  How can I search? Is there any command or I need to open all proceedings and then pick up one by one?

  Hello

  You can use the following sql query. USER_DEPENDENCIES / all_dependencies / dba_dependencies, these can also be used.

  Select * from all_dependencies where referenced_name = 'your_table_name '.

  Thank you
  PAL

• How to merge 3 different tables using ADF BC?

  Hello
  
  I have 3 tables (i.e. employee location, Dept)
  
  First of all I must merge employee and Dept as "* EmployeeDept *" table with the primary key (EmployeeID) and then I should merge "* EmployeeDept *" with Dept table with the primary key (DeptID) from the Dept table.»»
  I tried "* ViewLink *"I am however able to merge two tables (employee and Dept) as "EmployeeDept", no idea how to merge the third table (Dept) with her. "
  
  Help, please.
  
  Thanks in advance

  Either by the method described by Shay or build you a new vo, select expert mode for the query and write the select statement. In this case, the data cannot be modified.

  Timo

• How to find the security protocol used by a site in firefox to version 24.6.0

  I'm unable to find the security protocol used by the site, either SSL or TLS 1.0 or 1.2.

  I see my answer above is marked as useless, so I guess it doesn't help for Firefox 24.

  You should be able to see which version of the TLS Protocol and encryption to agree to the current use of press.
  You can use the above posted extension or check in the Security tab of the Web Console (Firefox/tools > Web Developer).
  24 Firefox supports only TLS 1.0 (security.tls.version.max = 1), so that only leaves you with Protocol to guess.

  • http://KB.mozillazine.org/security.TLS.version. *
  • 0 means SSL 3.0, TLS 1.0 means 1, 2 means TLS 1.1, 3 means TLS 1.2 etc..

  In Firefox 24 you have the Security tab in "tools > Page Info > Security" to see what level of encryption is used, and you do not see what costume of encryption is used.
  To find you would have to disable any combination of encryption algorithm by setting the Pref security.ssls false and allow both until you get a secure connection.

• How to find out really currently used physical memory and swap space of hard disk to the virtual computer running?

  Suppose that I'm leaving WinXP hostOS a guestOS. Then a part of this guestOS remain in physical memory and another part is deployed on hard drive in the swap file resp swap partition.

  First question: the complete *.vmdk loaded into memory/swap space or only the part that is currently required?

  Perhaps only a *.vmdk 800 MB / 3GB is really responsible. But these 800 MB could be extended to 2 GB, because the content of these 800 MB is not compressed during load or guestOS drivers allocate additional memory.

  *. VMDK size seems so NO indicator for the actual amount of used memory / swap.

  How will I know how much physical (a) memory and (b) the hard disk swap space EXACTLY is currently occupied by a certain virtual machine running?

  Matt

  mattad wrote:

  First question: the complete *.vmdk loaded into memory/swap space or only the part that is currently required?

  The vmdk is not loaded into memory, because it is the drive of the virtual machine.

  *. VMDK size seems so NO indicator for the actual amount of used memory / swap.

  Yes, of course not. The memory used by the client is not related to the size of hard but the RAM assigned in the options of hardware reviews.

  How will I know how much physical (a) memory and (b) the hard disk swap space EXACTLY is currently occupied by a certain virtual machine running?

  Open the Task Manager and find a task vmware - vmx.exe or vmware-vmx - debug.exe.

  The swap file should be used if you have chosen to allow that VMware Workstation is authorized to Exchange. The file where swaps to door expansion .vmem Workstation. Search folder of comments.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• How to find the physical corruption

  
  Hello

  I backup sed post order for physical corruption in my database as follows.

  backup validate check logical database;
  
  

  After his command, I asked v$ database_block_corruption.

  12:04:47 SQL> select * from v$database_block_corruption;
       FILE#     BLOCK#     BLOCKS CORRUPTION_CHANGE# CORRUPTIO
  ---------- ---------- ---------- ------------------ ---------
           1      11477          2          228760588 LOGICAL
           1      11514          1          228760329 LOGICAL
  12:05:09 SQL>
  
  

  I'm looking for if it is a physical corruption of logical corruption?

  I also used the dbv command to check my system datafile (file # 1). And the output is as foolows

  D:\>dbv file=D:\ORACLE\ORADATA\OPERA\SYSTEM01.DBf
  DBVERIFY: Release 10.2.0.4.0 - Production on Mon Nov 18 11:56:23 2013
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  DBVERIFY - Verification starting : FILE = D:\ORACLE\ORADATA\OPERA\SYSTEM01.DBf
  DBV-00200: Block, DBA 4205781, already marked corrupt
  DBV-00200: Block, DBA 4205782, already marked corrupt
  DBV-00200: Block, DBA 4205818, already marked corrupt
  
  DBVERIFY - Verification complete
  Total Pages Examined         : 168960
  Total Pages Processed (Data) : 127180
  Total Pages Failing   (Data) : 0
  Total Pages Processed (Index): 25248
  Total Pages Failing   (Index): 0
  Total Pages Processed (Other): 2440
  Total Pages Processed (Seg)  : 0
  Total Pages Failing   (Seg)  : 0
  Total Pages Empty            : 14092
  Total Pages Marked Corrupt   : 3
  Total Pages Influx           : 0
  Highest block SCN            : 245793757 (0.245793757)
  
  

  As dbv always checks the physical corruption, but how can I make sure using RMAn that whatever physical corruption of only logical corruption? Thank you

  Alert log say something like the following

  Sat Sep 14 00:22:50 2013

  Errors in the d:\oracle\admin\opera\bdump\opera_p008_3916.trc file:

  ORA-01578: block ORACLE (corrupted file # 1, block # 11478) data

  ORA-01110: data file 1: ' D:\ORACLE\ORADATA\OPERA\SYSTEM01. DBF'

  ORA-10564: tablespace SYSTEM

  ORA-01110: data file 1: ' D:\ORACLE\ORADATA\OPERA\SYSTEM01. DBF'

  "ORA-10561: TRANSACTION SUCCESSFUL DATA block type ' BLOCK ', object # 5121 data."

  ORA-00607: an internal error occurred in making a change to a data block

  [ORA-00600: internal error code, arguments: [kddummy_blkchk], [1], [11478], [6101], [], [], []]

  SAQ

  Hello

  DBVerify reports two logical corruptions and physical intra-block by default. A good starting point would be to go through the MOS score below to understand.

  Logical and physical block corruptions. Everything you wanted to know on this subject. (Doc ID 840978.1)

  Basically, you will not be able to read data in the blocks in physical corruption corrupt some time may be able to read the data into logical corruption.

  In addition, DBVerify report the errors of DBV-200/201 to logical corruption.

  HTH

  Abhishek

• How to find the physical hostname of the client used to connect to a linked view clone

  Our environment consists of Windows XP Professional workstations running the view client 4.0.  They are connecting to a connection manager view 4.0 that has a non-persistante linked server cloning pool, also the workstations XP Professional. We have two servers of connection manager, it allows direct connect.

  Is there a way to find the name of the physical device that they log in with?  I believe that when we use the Wyse terminals, the device name is passed to the NAME environment variable.  However when we use the view client, this value is set to "console" or "RDP - Tcp #1".

  I tried to test this with PCoIP and RDP, direct connection and pass through.

  Any ideas would be greatly appreciated.

  Thank you!

  What you will find, is the agent of view creates a number of user environment variables that give the details of the customer such as IP address, name and MAC address. What we have seen is that these variables are not necessarily available during logon, even if they are in 'HKCU\Volatile' If you want to take action based on an attribute of client device for things like mapping printers.

  Example of variables is:

  ViewClient_Broker_Remote_IP_Address=192.168.0.231
  ViewClient_Machine_Domain=appsense
  ViewClient_Machine_Name=APWAARC04
  ViewClient_MAC_Address=54-B3-80-DA-63-08
  ViewClient_Type=Windows
  

  --

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• How to find the child tables

  Hello
  
  y at - it (quesry) way to find the list of children tables for a given table.
  
  tried to interview user_constraints and USER_CONS_COLUMNS, but not be able to find a way.
  
  Thank you

  Hello

  You can use the query as follows - it will list the children tables and the FK name for table HR.JOBS:
  Select
  a.Owner, a.table_name, a.constraint_name
  sys.all_constraints a.,
  (select master, constraint_name from sys.all_constraints where owner = * 'HR' * and table_name = * "JOBS" * and constraint_type in ('P', 'U')) b
  where
  a.CONSTRAINT_TYPE = 'R' and a.r_constraint_name = b.constraint_name and a.r_owner = b.owner

  If you do not need name FK, then put separate:
  Select
  a.owner, separate a.table_name
  sys.all_constraints a.,
  (select master, constraint_name from sys.all_constraints where owner = 'HR' and table_name = 'JOBS' and constraint_type in ('P', 'U')) b
  where
  a.CONSTRAINT_TYPE = 'R' and a.r_constraint_name = b.constraint_name and a.r_owner = b.owner

  Philippe

• How to find all the pages using the table

  Hello
  Can someone help me find a list of the pages of the APEX in an application which, as based on a particular database table.
  Basically, I need to find the page names that should be changed to a change on the structure of the database tables.
  Thanks in advance
  Aali

  "Database object dependencies" APEX report can help too

  From the manufacturer of the APEX
  Home > Application Builder > Application 102 > Application reports > shared components > dependencies of objects in the database

  CITY