Objective auto rotation to focus what take pictures

Similar Questions

• camera not focus or take photos

  I had my camera for 2 years and had no problems.  Now it will not focus correctly when you use the LCD screen.  He also says that it is busy when I try to take a picture. Help! It will take pictures when I use the viewfinder.

  If the unit is in "One Shot" mode (it is by default, mode), then it also uses what is called the "Update priority".  This means that there _must_ confirm that he was able to reach the front focus it takes a picture.

  The other mode is called "AI Servo" who uses what is called the "release priority".  In this mode, the camera _will_ take a photo when you press the shutter button completely even if she was not able to focus (usually, this is not desired behavior, unless you know how to watch so he could confirm the update, but the sports photographers like this mode.)

  There is a mode of development called 'AI Focus' - it is not really a new way... that really means he'll try to evalutate if a subject is moving or not and then try to use the mode "One Shot" mode or "AI Servo" depending on whether the subject was stationary or moving.

  ALSO... the camera will only attempt to auto-focus is the switch AF/MF on your lens is in the position of the AF (autofocus).  If you switch to MF (focus manual), then the camera must take a picture immediately (even if she is not centered).

  Anyway... the camera can struggle to focus the light is low or if the topic lack of contrast (for example if you just point the camera on a clear blue sky, then he will really struggle focus - even a starry sky is a problem because the individual stars are simply not big enough and bright enough.)

  If your camera is having a problem AND you take a picture in low light or a topic which has no contrast (or both) then this isn't really a problem with the camera (even a perfect work machine would have problems in these situations).

  It could be useful that we could eliminate the possibility that the reason that the unit is struggling to focus is due to inadequate lighting.

  Can you take the camera one day sunny nice birght and try to focus on a subject well lit?  This would allow you to confirm or rule out the possibility that lighting is to blame.

  It is also possible that the lens is a problem.  What lens you use and you have more than one goal?

  If you have the standard "kit" lens that usually comes with a T3, it should be a lens EF-S 18-55mm f/3.5-5.6 IS II.  This lens is _not_ allow "full time" in manual focus.  This means that you should not try to focus of the lens, if the lens is in mode "AF".  Put the lens mode "MF".  Turn the ring on the front of the lens all the way one way (any way) until you have executed the update completely 'out' or ' bottom'.   Then switch the focus mode switch to "AF".  Pointing the camera at a subject and try to focus.  You * must * hear engines focus on the goal, as he tries to concentrate.  If you do not hear the engines of development, it could indicate a problem with the lens.   If, by chance, you get to possess either a lens 'USM' or the new 'STM' goal, these lenses have development engines that are extremely silent (espeically the 'STM' lenses) so you would have probably not heard the goal point.  But the version 'STM' of the lens EF-S 18-55mm lens is extremely new and as it seems that your unit is a few years old, you probably do not have the "VTS" version

  Usually if the camera or lens has malfunctioned, then the camera would display an error code.  It doesn't seem like it displays a code, which makes me suspect this is not the same as take a picture because it cannot lock the focus (but the focus mechanism correctly tries to focus).   That is why I am wonderng if the reason why it does not lock focus is due to insufficient light or due to an issue with insufficient contrast.

• My eos 500 d take pictures to less than the value of the manual and HAVE the value servo... Help!

  Hi all. my camera will not take photos more in automatic mode or manual mode unless I have it HAVE servo value. It will be always filming and take pictures of in this mode. the problem is the same with all lenses. Anyone have any ideas?

  Assuming that you test in Nice bright lighting, it is probably a failure of the lens, but there's a little more tests needed to be sure.  When the appliance is in mode "One Shot" (not in "AI Servo" mode) the camera also uses what is called the "Update priority".  This means that when you press the shutter button to take the picture, the 'priority' is on the guarantee that the camera was focused BEFORE it will allow the camera taking the picture.  If you pass in "AI Servo" mode, the camera switches to what is called the "release priority" (most popular with sports and action).  Priority of release explains that when you press the shutter button... the most important thing is that the camera taking the picture "right now" (if the camera had time to focus or not).

  Once again, you must have enough light to test (outside on a day... that's fine).  Don't test it in dark situations - especially on the subjects of low contrast.

  Please turn on the camcorder in "live view" mode, with the target set to autofocus (AF/MF switch on the position of the AF).

  It to focus and take a picture?

  The reason I ask is because your camera has in fact two independent autofocus systems.  He uses a normal mode (looking in the viewfinder to frame the shot) and the other in "liveview" mode (when using the LCD screen on the back to the chassis so.).

  It is extremely unlikely that two development systems can fail (because they are independent of each other.  The camera uses one or the other, never both at the same time.)  If the camera cannot focus with ONE of these two methods point, then the problem is more likely to be objective.

  The camera sends signals to the intermediate target electronic contacts that you see at the back of the lens.  But the engines are actually inside the lens itself.  If the lens electronics or engine does not then the lens will not focus, and since you are in 'One Shot' with "Priority Focus" mode, the camera will refuse to take the picture because it cannot lock the focus.  BTW... If you pass the lens to position "MF", the camera will still be the shot because the camera is no longer trying to focus.

  If you have more than one objective... try using a different lens.

• RAZR camera take pictures upside

  I recently got a new phone after my broken screen and I tabled by Asurion warranty. With my new phone when I take photos, sometimes they appear backwards. Not always, but more often than otherwise. My original phone has never done that. Its quite annoying to have to go back to the photo subsequently almost every time and change and rotate. I know that the RAZR has the function appears on the right photos no matter how you take the photo holding the phone, but I guess that somewhere in the mine that the calibration so that this feature is disabled. That everybody knows or has an idea how to re - calibrate?

  Note: Regardless of how I want the phone when it arrives. No matter how it is on the screen at the same time, he returned it upside down after the pic appears.

  My phone occasionally and as derekv displayed, the only way to stop is turn off and on. My husband and I don't have home phones, so I do not turn off my phone overnight, but he takes over from one day to the next. I noticed that it works more fast and more fluid thereafter.

  I think this is a bug in the automatic rotation, because sometimes my screen did at that time not in camera mode; It gets stuck and won't turn. I try to keep my camera 8mp setting - I like the better image quality. I noticed that after an update, my phone reset the widescreen (6mp) setting and the problem is more pronounced with this setting. Another thing that happened when I take pictures of sky, or something in the sky, there as he does not know what the direction is supposed to be, then it throws the images upside down or sideways. Then, when you try to look at them, the auto rotate their turns the wrong way!

• I have an EOS 7 d, I need to be able to take pictures of the inside of homes. I am a real estate agent. So to get a p

  I have an EOS 7 d, I need to be able to take pictures of the inside of homes. I am a real estate agent. It is difficult to obtain an image of a small bedroom or bathroom.  What lens wide angle do you suggest. The price is a concern, I don't want to spend more than $500 I am an amateur photographer, I do everything on Auto.

  Thank you

• tm2t 1000 auto-rotation

  I had business with the help of HP since a month now on automatic rotation of the screen show.  I'm curious to know if it's really a defect or just a bad design.

  Problem #1:  When I flip the back cover in Tablet PC mode, I expect the screen to rotate automatically in portrait mode.  Mine does not work.  He remains in landscape.  I have to press the button on the cover to get it to run.

  Problem #2: In tablet mode, I prefer "secondary portrait".  In this way, the bezel (which is the heaviest part of the Tablet), is resting in my hand... which actually feel lighter.  By default, the first position is portrait primary school.  So, I went to control panel-> Tablet PC settings and clicked on the link "orientation."  In the options, I disabled the primary and secondary Landscape Portrait.  What I expected now, when I press the button, it alternates between standard landscape and portrait favorite.  Instead, it does not take into account these parameters and turns to all 4 positions.  So now, when I want to make the portrait, I have 3 times press the button to do it where I want.

  Problem #3: After I get to secondary portrait, if I plug in the device it in (all in tablet mode), he returned to primary landscape.  Again, I must press the button 3 times to get it to where I want to.  :-(

  I've been a user of Tablet for about a decade.  I recently replaced a version of Acer of 7 years.  The old Acer was so much more usable than this one.

  I deal with support and they seem to think that it is faulty hardware.  For some reason, the first time I sent it, they replaced the keyboard.  Seems random to me.  He always behaves in this way and they want to send me new.

  Can someone tell me if this is how your Tablet?  I'm curious to know if it is defective or general bad design.  My hunch is this one.

  The fixed!

  http://www.touchsmartdevzone.com/forum/thread/2919/for-HP-TouchSmart-TM2-only-fixes-and-updates/

  Bravo for the link above.  Here are the steps I took to make my portrait of auto rotation for secondary display:

  1. I uninstalled quick launch button software
  2 restarted
  3. I googled: HP QuickLaunch 6.40.12.2 L and found a direct link to an older version of the software.
  4 installed
  5 changed Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Hewlett - Packard HP Quick Launch Buttons\Schemes\Default\8526\Tablet_Docked_Display_Orientation = 2

  where

  0 - primary landscape
  1 - seconday portrait
  2 - seconday landscape
  3. primary portrait

  6 reboot

  Now my screen automatically rotates secondary portrait in tablet mode.

  WARNING!  As I test it... it seems that my screen rotation button no longer works.

  I'm perfectly content with that because I never want my primary landscape screen when it is a laptop and the secondary portrait in the form of tablets.  I can still rotate the screen preferably video editing if I had to.  According to the link, you may be able to keep the functionality of the button by just copying on a particular DLL from the older version of the app.  I can try it eventually.

• Z5 - accelerometer / auto rotation - does not work

  Hi all

  I hope you can help me with below the question.

  I'm a very happy new owner Xperia Z5 'almost'. After reading the forum for the last 4 weeks, I finally bought Xperia Z5 only 2 days ago. After moving to iPhone5, I was very pleased until what I figured out that accelerometer (and auto rotate) do any work.

  My investigation went as far as following:

  -in the Middle-> screen-> auto rotation is switched ON and despite the fact that it does not

  -in service mode * #* #7378423 #* #*-> Service tests-> accelerometer-> the "ball" in the image is ALWAYS on the left side (meaning: there is no way to move the ball to the right, regardless of how I move or rotate the phone, see pictures at the bottom of this post)

  -in Safe Mode - the question is the same

  -After repairing the phone via PC Companion - the question is the same

  -Gyro works very well

  I'm totally out of ideas now and are about to book a service at Sony (never had to do so fast that leaves a bad first impression, unfortunately).

  If any of you had a similar issue and have clues on how to fix it, please let me know.

  Thank you

  Sylwester

  

  

  

  Happy to help

  Thread locked.

• Photo auto rotation to importation into LR3?

  Hello!

  When you import directly from a card in LR3, vertical pictures are displayed correctly in the library, but JPEG files are not turned in the file system.

  This isn't a problem if you change with CS5, or export the photos. In these cases they are handled appropriately.

  However if you change by something else (in the filters of my Topaz case via Topaz Fusion Express), the pictures are not properly turned.

  Context: W7x64, LR3, cameras (EOS5D, G10) set for auto-rotation 'on '.

  Any idea on how to solve this problem?

  Thank you very much!

  Jean-Paul

  John Paul,

  JPAdans wrote:

  ... but the JPEGs are not turned in the file system. ...

  1. Are you talking about the JPEGs from the camera or those exported to LR?
  2. What do you mean by "in the file system" (explore thumbnails)?

  Gossweiler beat

  Switzerland

• Take pictures

  Can't find help to take pictures using my Apple Watch 2.2.1 running.

  You can't take pictures on the Apple Watch-it has no camera. However, you can take screenshots if that's what you mean: How to take a screenshot on your Apple Watch - Apple Support

• Why these intrusive permissions? (take pictures 'at any time'!)

  Why should a browser permission to take pictures of what my unit is to see "at any time"? I like Firefox, but I'm very unhappy about it.

  Hello, this is part of the camera api - Please also see the following article which explains the permissions: how Firefox for Android uses the requested permissions?

• Cannot take pictures iPhone 5s and hidden folders

  Husband has iPhone 5s, and it cannot take any more pictures with a storage in full.  Sometimes he wanted to completely import/erase photos off phone, sometimes import but not erase.  Apparently (according to iTunes when connected), it has an insane amount of photos stored on the phone SOMEWHERE, but his camera is COMPLETELY EMPTY! When you connect to the computer again, and she asks if we want to import photos, we say Yes (just for fun now), and he says there is still no new pictures to import. (for a good reason because he can't take pictures and the film file is empty).

  How to access or import these photos hidden this iTunes dashboard says that he has, then he can use his camera again? They must be stored somewhere on the motherboard right?  BTW his iPhone isn't a year old, but either.  Never had this problem before with sound or all other iPhones, so we are baffled.  It won't restore to factory settings due to other information that he does not want to lose in the process, even if we backed the phone up to iCloud and computer via iTunes.  ANY SUGGESTIONS PLEASE? DOES ANYONE ELSE HAVE THIS PROBLEM?

  Thank you!

  iPhone 5 s

  The images are probably corrupt and occupation of space while not clearly rendered like pictures and available in the Photos app

  This article can help

  1. What is others and what I can do about it - CSA

• ThinkPad Yoga 14 (20FY) - can not auto-rotation, Missing in Action Center - WIndows 10

  I just did a clean install of Windows on my Thinkpad Yoga 14 10. I tried to install all the drivers that I could. The only thing missing for the laptop, it's that I can't auto-rotation in tablet mode. Auto-rotation setting is missing from the center of the action and enter the display settings is not an option to allow auto-rotation. I also tried enabling the sensor, the sensor monitoring service and Service of sensor data with no luck. What are the conditions to get this working?

  Thank you!

  I finally got it to work. After some intense searching, I found the driver that I had to install. It ends up being the Intel integrated sensor Solution. Installation of the package has work as well as the addition of a "sensors" section in device with drivers HID sensor Manager.

  http://support.Lenovo.com/us/en/downloads/ds112057

  It's weird that the driver does not show in the ThinkPad Yoga 14 drivers page.

• Camera will not take pictures!

  My camera is not let me take pictures at all, when I press the capture button, it just says: ' picture failed. I think that it because of the retro camera app that I downloaded just before the 2.1 update. I can put the camera app retro as my default camera app, but I don't know how to reverse the trend. I deleted the Retro Cam application, but I can still take pictures with the regular camera on my phone app. Someone at - he a starter or a solution to this problem?, your answer would be greatly appreciated. Thank you, Melvin.

  thestrokes89 wrote:
  My camera is not let me take pictures at all, when I press the capture button, it just says: ' picture failed. I think that it because of the retro camera app that I downloaded just before the 2.1 update. I can put the camera app retro as my default camera app, but I don't know how to reverse the trend. I deleted the Retro Cam application, but I can still take pictures with the regular camera on my phone app. Someone at - he a starter or a solution to this problem?, your answer would be greatly appreciated. Thank you, Melvin.
  

  After you remove the app do you turn off the phone and power then turn it back on. After back what happens. We have seen that the apps are still not working after upgrade and reset it will probably set but let just first try the camera application.

• How can I TAKE pictures on my laptop...?

  How to make a new photos on my new laptop.  I don't know where to go. I don't know what to do.

  the answers here are not useful.

  WHERE I'M GOING AND HOW I'M TAKING NEW PHOTOS ON MY LAPTOP?

  Your laptop would both have a camera installed in it AND have installed the software which can take pictures.  Many laptops come with cameras, but most do not come with software to take pictures but are equipped with videoconferencing software instead.

• How can I take pictures with a regular usb camera and labwindows

  How can I take pictures with a regular usb camera and labwindows

  Hello

  What do you mean "ordinary USB camera? It's a Vision camera with a communication based on the API Vision camera or a 3rd party (such as a webcam)?

  In the latter case, you may need to consult the documentation of the manufacturer, it should be sent with her library (C DLL, ActiveX automation, .NET assembly) with functions to communicate with drivers.

  Best regards