ObjectKeyAssignment@PersonWantsOrg is not met at the time of the request is approved (event: granted)

Similar Questions

• Tried to use iTunes to restore iPhone 5s, but the 17 error happens: "this device is not eligible for the requested build". No problem to enter the mode of recovery, apple server and the internet. Help?

  I tried to use iTunes to restore my iPhone 5s, but the 17 error happens: "this device is not eligible for the requested build". No problem to enter the recovery mode, connection to the apple Server (the software update download was complete) and internet connection. Help? I do an Apple store to restore?

  Error 17 refers to network problems. Take a look at these articles and try the suggestions:

  Solve the iOS update and restore error in iTunes - Apple Support

  Get help with iOS update or restore errors - Apple Support

• Ideas re: ' Connect-VIServer: could not connect using the requested protocol "failure

  I know, it's a matter of weakness, but I hit the wall on this one. I've even got desperate enough that bouncing private LuD, and I tried everything we discussed, but I'm still @ deadlocked.

  I developed and tested several scripts that I am finally ready to go with Prod.

  I get this error when I am trying to connect to Vcenter server or host of the cmndline of vitoolkit (and obviously in scripts).

  «Connect-VIServer: could not connect using the requested protocol.»

  I'm runing the vitoolkit FROM the server VCenter, so I wouldn't exepct the local to be a problem connection. I expect calls the ESX servers as questions) (we have several firewalls in the game). But even once, on-site I would not expect a problem.

  I checked my ports of VC and even more precisely called listener in the connect command, but it does not help.

  I tried to watch the ports through various lines of command, but I don't see anything.

  Any suggestions?

  Add - confirm: $false and it won't be quick.

  =====

  Carter Shanklin

  Read the PowerCLI Blog
  [Follow me on Twitter |] http://twitter.com/cshanklin]

• Failed to perform recovery of factory setting - error 0x8007045D Code / product key error - "ERROR!" We encountered a problem with the request for approval.

  Original title: product key error

  Hi all...

  I have ' tried to download the disc Image of Windows 7 (ISO file), but when I insert my product key, the system cannot check it.
  I use the laptop Sony Vaio VPC EG35EG with preinstalled Windows 7 Home Basic 64 bit inside.
  Now, after that there is error (I cannot yet perform plant pose recovery; always finished with error 0x8007045D Code), I need to install clean my laptop with the USB or DVD Installer key. But then, when I try to download it, my product key (I found it on the sticker at the bottom of the laptop) are not validated by microsoft. It is said:

  "ERROR!" We encountered a problem with the request for approval.

  What should I do now? Y does it can someone help me?
  Thank you.

  Consider the following text:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  also check:

  https://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• Output meter, at the request

  I would like to have a counter to a single output pulse whenever an incident occurs in a loop. My current solution (in pseudocode; I'm using LabWindows CVI on an RT target) looks like this:

  DAQmxCreateTask (...);
  
  DAQmxCreateCOPulseChanTime (...);
  
  While (true)
  
  {
  
    If (condition)
  
    {
  
      T1 = Timer();
  
      DAQmxStartTask (...);
  
      T2 = Timer();
  
      DAQmxErrChk (DAQmxWaitUntilTaskDone(*th,2));
  
      DAQmxErrChk (DAQmxStopTask(*th));
  
    }
  
  }
  
  DAQmxClearTask (...);

  Unfortunately, the time between t1 and t2 is at least 0.142ms and sometimes 2ms is there an elegant way to reduce this and do not have to call the StartTask again and again?

  Thank you

  Jonas

  You should get an improvement by committing to the task before your loop:

  ...
  
  DAQmxCreateCOPulseChanTime (...);
  
  DAQmxTaskControl (taskHandle, DAQmx_Val_Task_Commit);
  
  While (true)
  
  ...

  If this isn't good enough, you could try instead using a task of digital output (start the task before the loop, write twice inside the loop - high then low - whenever you need a pulse output).  If the pulse width needs any kind of accuracy at all you want to use the digital output task to trigger an output meter (start the meter before the loop task and configure it to be "redeclenchables" so you don't have to restart several times in the software).  I don't know whether or not it will actually run faster without benchmarking it.

  Best regards

• media center is not AutoSave at the request of programs

  What time for media center of regular program does nothing. need to start manually.

  Hi Webber,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, it seems that you are having problems with the recording in Windows Media Center.

  Your show might not have been recorded for various reasons. To check the history of recording to find out why the show could not have been saved, follow these steps:

  a: On the start screen, go to TV + movies , clickrecorded tv , click the view in the application and then click on story.

  b: To organize the list, click sort by Date sort by status and sort by title .

  c: Use the arrows on the screen to scroll through the list. The status for each show is listed next to the title of the following: Recorded, not recorded, Deleted, canceled, Preempted, partial or bad Tuner.

  d: For a more detailed explanation on the State of recording the show, click on the title of the show.

  Here are the reasons why a show can't save:

  • There was a conflict with another record with a higher priority. You can see more information about priorities earlier in this topic.

  • A tuner was not available when the show had to register.

  • There is no available disk space and no records could be removed to create more space to record. To learn how to delete records, see management of recorded TV shows: frequently asked questions .

  • There are no offers updated Guide for scheduled recording. Make sure that the latest Guide data is downloaded Windows Media Center. For more information, see troubleshooting problems Guide download .

  • Restrictions that were set by the broadcaster or the creator of prohibited content the show being recorded.

  • The show was previously saved. Windows Media Center does not record a show of a series if she has already recorded or deleted in the last eight weeks.

  • You have reached the limit of how many records are kept for a series. Remove the other records for the series or increase the limit of records how can be kept for a series. To learn how to manage your recordings, seemanagement of recorded TV shows: frequently asked questions .

  • The TV station changed the hourly number or channel for a specific network or the show didn't air.

  • There was no TV signal because the channel was not available, the TV signal has been disconnected or the tuner has been disabled.

  • Your computer is turned off or lost power during the time that the show was scheduled to record. Your computer must be on or standby mode, hibernation or Away to record a program successfully.

  • If you have a set - top box, the infrared (IR) cable may have been disconnected, including preventedWindows Media Center from changing the channel to start the recording.

  For more information, access the link which is mainly used for Windows Vista but that applies both to Windows 7 below.

  A problem of recording TV on your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-recording-TV-on-your-computer

  Answer to us if you are having problems with Windows Media Center or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Apply ViewCriteria not added to the request

  JDeveloper 11.1.2.2

  I have a ViewCriteria which is supposed to be applied to a ViewObject, but I get an error "attempt to define a parameter name that does not intervene in the sql code.  I know that the ViewCriteria is applied, but for some reason, the 'criteria' in the ViewCriteria are not added to the query that is sent to the database.

  Here's the method where the error occurs:

  public List<SelectItem> getCategorySelectItems()
      {
          categorySelectItems = new ArrayList<SelectItem>();
          
          BindingContainer bindings = ADFUtils.getBindingContainer();
          DCIteratorBinding dcIteratorBinding = (DCIteratorBinding) bindings.get(ITERATOR_NAME_CATEGORY_SITEID_PHASEID);
          MytrainCategoriesVOImpl mytrainCategoriesVO = (MytrainCategoriesVOImpl) dcIteratorBinding.getViewObject();
          
          mytrainCategoriesVO.setbind_SiteId(GuidoUtils.getSelectedSiteId());        
          mytrainCategoriesVO.setbind_PhaseId(selectedPhaseId);
          
          ViewCriteriaManager vcm = mytrainCategoriesVO.getViewCriteriaManager();
          String[] vcs = vcm.getApplyViewCriteriaNames();
          for(String vcname : vcs){
              logger.finer("Applied ViewCriteria: " + vcname);
          }
          
          mytrainCategoriesVO.executeQuery();
          
          while(mytrainCategoriesVO.hasNext())
          {
              MytrainCategoriesVORowImpl mytrainCategoriesVORow = (MytrainCategoriesVORowImpl) mytrainCategoriesVO.next();
              SelectItem newSelectItem = new SelectItem(mytrainCategoriesVORow.getCategoryId(), mytrainCategoriesVORow.getTitle());
              categorySelectItems.add(newSelectItem);
          }
          
          return categorySelectItems;
      }
  

  The debugging part where I write on the getApplyViewCriteriaNames() shows that the criteria of the "site_id" and "phase_id" applies, but does not query SQL that is sent to the server contain the ' where phase_id =: bind_PhaseId "section, even if the query contains the" where site_id =: bind_SiteId "section.

  Any ideas why it would apply a ViewCriteria, and not the other, even if the ViewCriteriaManager said that the two criteria are applied?

  One problem I have seeIs you do all this in the view controller, while you should do it in the model layer. Depending on how the view criteria is build (ignore nulls, required binding variable) the sql generator fails to messages of where clause.

  What might happen is that one of your bind variables are set to null without your knowledge. To be sure that your variables are set correctly, you must save the message to the executeQuery method. an example on how to do this can be found here http://wp.me/pcBZk-2d

  Third method exports the query and its parameters.

  Timo

• Purchase order number do not go with the request while showing on the form?

  Hi all
  
  I create a purchase order and save my work. I know, that this base table is po_headers_all
  When I po since the request form, shows. but with the next request, there is no record
  
  Select * from po_headers_all where po_header_id = 1704;
  
  Note: po is just save but not submit it for approval.
  
  Thank you
  Yoann

  Maybe you wondering about the wrong column?

  Try:

  Select * from po_headers_all where segment1 = "1704";

• Create the request for approval to remove the user operation with IOM api-11 g Release2

  Hello
  
  How do I create an approval request for an API using operation user remove? Can someone guide me? Any help is greatly appreciated...
  
  
  ARO
  Aliye

  You must use the new API set to create the request. OIM 11 g R2 supports model not application so your code will be changed.

  Examples: http://docs.oracle.com/cd/E27559_01/doc.1112/e28183/oim_up.htm#BABGBEHG

• Table of IOM which shows the relationship between the request and approver

  Hello
  
  I have a few users who belong to the group "admin".
  
  Any request for a particular resource goes to this group for approval.
  
  I tried most of the tables in oim 11g r2 to find a relationship between the request and the approver group.
  
  The demand table has information about the request but no relationship with regard to the approver. Approver as a group, I need to know the status of name and the Group (pending, approved, rejected) request.
  
  Please could you all expert let me know the table I can find information on these...
  
  Thank you

  Search in the SOA tables

  WFTASK

• Homepage is CNN. When Firefox is launched, says TAB not FOUND. The requested object does not exist on this server. The link you followed is that is exceeded in

  Cannot get to CNN.com at all. I can get to CNN.com if I use IE. This problem just started. I have already removed/reinstalled Firefox today. He worked for a while and then when I restart/shutdown, the problem is back.

  I called AT & T even if they are not my provider & CSR said someone else had called today and said they had the same problem. AT & T wouldn't let me speak to technical support. I called my provider and they do not help because I could get on the Internet.

  All of a sudden, when I went down to the current provider w / my phone, I restarted my PC (for the umpteenth time) and VOILA! My problem is solved. Someone did something, but I'll never know.

  Thanks for the help.

• When click on my icon of firefox, I get "404 Not Found. The requested URL was not found on this server"worked fine until yesterday.

  I don't know what other information you give. I can't go to my start page for firefox. Firefox has not been deleted. I downloaded and reinstalled several times and still get the same message when I try to open it.

  The local part (en-US) seems to be missing from the URL:

  • http://start.Mozilla.org/en-us/Firefox?client=Firefox-a & rls = org.mozilla:-org.mozilla

  The current versions of Firefox use the build-in on: home page to home as shown above, so you can change the home page to this URL.

• Performance diagnosis is not available in the Windows Server 2008 Event Viewer

  In Event Viewer, I can see the Microsoft-Windows-Diagnostics-Performance/operational under Windows 7 but I couldn't get under another computer running Windows 2008. Is it possible to allow that?

  Hello

  Your Windows is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Why still not appear in the request manager to download?

  I have access to other programs, but still isn't available for download... What is the dealeo?  The App Manager update itself so I am running the latest version.

  I am running Windows 7 64 bit.

  Thank you

  Chris

  Still installs with Premiere Pro.

  http://forums.Adobe.com/message/4397326

• Windows connection problems and "Windows could not log in the Windows Event Service.

  September 14, 2014, I installed the hotfix for Windows (KB2590550).

  When I try to log on to a standard user account (not Admin), I would get an error that might say something like "Windows could not connect to the Windows Service Service event".  I click OK and then get a totally blank screen showing on the arrow of the mouse (which can be moved).

  Around this same time, when I was able to connect, I got a "not genuine Windows" pop up.  My windows 7 came factory-installed by Dell (Dec. 2011) and I got no re-imaging, re - install or repair since I got the computer.  I've also been running Symantec Endpoint Protection (version DoD) for 2011 as well.

  When I login as administrator (different account), I get an error "Failed to connect to the Windows Event Service" or something like it in a control bar bubble popup.

  I studied the Knowledge Base, and he said to apply the patch to KB2590550.

  Since then, the question is still common and works (sometimes) when I reset the password for the standard user.  In addition, all updates of the operating system, patches, etc. have failed since then.

  Now, I get occasional blue screens immediately as windows starts to load (just after the initial windows graphics) which triggers a reboot.

  Service Pack 1 is installed.

  Help, please!

  Hello

  Thank you for the update on the issue.

  If the problem still persists I suggest to run the SFC scan to check the integrity of the system and see what it finds.

   

  The sfc/scannow (System File Checker) command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  We can check & repair missing and corrupt files by the following article in the Microsoft Knowledge Base.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:

  sfc/scannow

  
  

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Get back to us with the result of the analysis so that we can offer you additional troubleshooting steps.

  Kind regards.