-Objects of Application - components-level shared how the code ON_NEW_INSTANCE

Similar Questions

• How low-level format using the code debugging?

  original title: how to low-level format using the debug code? can someone give a code

  How low-level format using the code debugging? can someone give a code

  Hi microcontrol.

  ·          What is the number and the model of the hard disk that you use?

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

  The Microsoft article below may help if you use a disk Western Digital or Seagate.

  Using DEBUG to start formatting

  http://support.Microsoft.com/kb/60089

  I hope this helps!

  Halima S - Microsoft technical support.

• Among application components are missing from the Application directory, please reinstall the application.

  Among application components are missing from the Application directory, please reinstall the application.

  Hello

  Please use clean tool to uninstall the application-

  https://helpx.Adobe.com/creative-cloud/KB/CC-cleaner-tool-installation-problems.html

  see the help document for install it again-

  https://helpx.Adobe.com/creative-cloud/help/manage-apps-services-desktop.html

  You can also check I get a message "among application components are missing from the application directory, please reinstall the application. .

  I hope this helps!

• Photoshop CS5, I get the message: some application components are missing from the Application directory, please reinstall the application.

  Trying to open Photoshop CS5 I get the following Message: among application components are missing from the Application directory, please reinstall the application.

  Can I get these downloaded components that my optical drive is broken.

  Download the CS5 products

• jdev11 - how the code filter additional liaison with radio buttons?

  Using JDev 11.1.1.0.2, ADF BC for model, ADF Faces JSF to view, deploy to WebLogic 10.3 appserver, database Oracle 11
  
  I asked for help (a do my work ask), that I'm the only developer JDev in our shop, and I looked at this problem too long and now have obscured the problem. I don't really want the answer (rather the skills needed to solve this problem), but it will ;-)
  
  Installation program:
  ExecwithParam base where the logic is stored in the AppModule. At this point, there is only a single binding TechID variable, which is passed to four of your different and updates the where clause and calls on each VO of the AppModule executeQuery. Works great so far!
  
  Need:
  Add additional time based filter: Group of buttons on the Radio for the last 30 days, 60 days, 90 days, choose a date. If choosing a date is sΘlectionnΘe, then the user selects a date with a date picker, and all records by this date are used.
  
  Support:
  There is a date variable in each query, and a common type of DATE filterDate may be added to each to filter with somedatefield > =: filterDate in each VO
  
  Thoughts:
  I like to break things in simple parts, so how about starting just the radio button.
  My thinking goes like this:
  Add another variable of filterDate liaison to each of your. Add this to the App Module.
  
  So, how can I set up a radio button so that I can get the value of the selected and then button that convert a SYSDATE - value and which use th e App Module logic? I continue to think of the big picture end of case and forget everthing. I know that's not difficult, but just ask me for some advice.
  
  At one point, I was thinking to add a clove of support to the option button, then wasn't sure if it was the best way and don't know how I would get the value in the AppModule. Part of the problem is that I came across a mental block. If I add the components that aren't linked data, as a selector of dates, or checkboxes, radio buttons, etc.. How can I get the values in the AppModule? I've seen many examples of data to related components, but do not know how to mix and match the binding with just a rich component controls base such as an input control. (This may better ask in a different thread).
  
  Finally, what of the big picture, the part about the addition of the datePicker - of ideas?
  
  Like cable TV, characters hosted - the kind that are related in my case the code! (Reference of American humor, must be familiar with USA cable TV channel (I'm addicted to the show House))
  
  Thank you, Ken

  Ken,

  A small correction to your last sentence - you don't want to refer to the support of the AM bean - you want to refer to the AM of the bean to support.

  If you want a very simple way: find the service for your AM method in the data control palette, drag-and - drop it on your page as a button JSPX. JDeveloper will automatically add a binding for the action in the pagedef. Then, double-click the button that results and create a new method of bean of support for her (in front of JDev, don't remember what we call the dialog box) - given the option, say JDev to put the code to link to you - then the resulting method should have the code that calls the method via the definition of the page. Simply add a bit of extra code to determine and set the date.

  John

• Can someone help me understand how the code should look like this?

  I keep looking for forums and I can't figure out if I need an instance name, a frame name, convert to symbol, graphics or video clip. All that I want is the images I have to move and stop as this graph on this website. If anyone can help to provide the code, it would be greatly appreciated!

  Best,

  Brett

  http://byluisvenegas.com/zines/ey-magateen/ey-magateen-5/

  this.addEventListener (MouseEvent.MOUSE_OVER, stopF);

  this.addEventListener (MouseEvent.MOUSE_OUT, playF);

  function stopF(e:MouseEvent):void {}

  This.Stop ();

  }

  function playF(e:MouseEvent):void {}

  This.Play ();

  }

• How the code select and move drawing

  Hello

  I create a table using flex.

  I was wondering how to make to move objects already on the scene.

  For example, after a rectangular shape is emerging, I want it to be moved by the mouse (press on and drag)

  I would appreciate if you can give some advice.

  Best

  Hi ChaChaYa,

  You can mark the correct answer. If someone looking for the same, it will help

  Thank you

  Vikram

• (Word2007 and Acrobat Reader 9.3) software applications do not respond (show the codes of errors/etc) ONE of my user accounts (running Vista Home Premium 64); will work perfectly on all the other (total of 3) user accounts.

  8.3 and word2007 Acrobat (version family and student) does not not in one of my user accounts - no problem in others; downloaded Acrobat 9.3; problem persists in Acrobat; Failed to get support for Word as they know is no longer my (expired) product key. Any method to repair/restore/reinstall to only the affected user account.

  Hi Chuck41,

  Since both applications work correctly on some other user accounts except the account of a user that can occur if this user account is damaged.
  You will need to create a new user account and then transfer the file and the settings of the user account damaged to the new user account.

  For more information please visit the link below.
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How the code orientation for flash pro mobile app?

  Hello

  I would like to know how to do coding for orientation and text slides up/down of mobile app created with flash professional.

  Thank you

  AFM

  Flash for Mobile orientation is in the descriptor XML apps. It has always been relatively the same since the beginning. This is a simple article about it:

  http://www.Adobe.com/devnet/flash/articles/screen_orientation_apis.html

  In what concerns the text by dragging upwards or downwards, in Flash it will always be the same. Position x / y and move it along the same x / y, the same things you've always done. Nothing is different from the original Flash about the scene as much as goes mobile.

• How the code root_go toAndPlay in AS3

  got a site that was in AS2 to AS3 is a code, I have a problem with and don't can't find the answer for, I got a movieclip in frame 1 of the original AS2 script. The clip at the end I had an action in the last frame of the mc _root.gotoAndPlay("home"), who, after the clipended, sent the main timeline to the hosting structure.

  I have the movieclip even in the main storyline in the resumption of the AS3 and want to know how to get the same result in AS3?

  ??

  rderd

  Try: MovieClip (this.root) .gotoAndPlay ('home');

  There is a better way to practice to do which involves no calls of root/parent, and someone can jump in to offer.  For now, the above offer is the quick solution and dirty that mimics the AS2 approach you described and answers the title question.

• Windows Update, the components are configured incorrectly, the code; C00D11C6

  I don't know, just a beginner?

  Assuming that your problem has not been resolved (or your question has not been answered to your satisfaction), please uncheck all my previous answers as RESPONSE then mark that other responses as RESPONSE unless & until your problems have been resolved.

  -Online Please do it now, before you respond to this message to avoid any confusion. Thank you.
  

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  I also cumulative updates for internet explorer 9... KB2647516 ON 15/02/12

  OK, but in your answer 16 March above, you said that KB2647516 was neither installed nor listed in installed updates...

  #5 everyone except KB2647516 & KB2633874...

  .. just like you did in response #2 in your last message, too:

  Q: neither KB2647516, nor KB2633874, nor KB2497640 is listed in the installed updates view, is that correct?
  A: I checked a couple of times, could not find these updates.

  At this point, I will transmit to Microsoft Support for all the help. Good luck (both you & technical support)!

   

• How the code just a logo image to straddle my head to my nav pane? See the example

  Hey guys!

  I am designing a Web page in which I would like to ride an organizations logo in the header navigation pane.

  I am using dreamweaver cs6 and get a result like the following webapge:http://sunridgechurch.org/

  I read there are several ways to do it but I would like to know the simplest method to achieve the result as in the example above and I'm sure many of you have experienced and ingenious designers would be the best references to ask!

  Thanks for your time!

  -Charania Designs

  They use position: absolute in css of the

  that contains the image, which is the best way to do it. Absolute positioning removes such content from the normal flow of the site and the place on top the rest content.

  It is also the best way to completely break your Web site if you do not fully understand.

  This is a case where the position: absolute has been used properly, for a start-stop on the page element. The rest of this design is managed with static which is the default value of positioning (Nothing written for position: in the css), floats, margins, and padding.

• How the code 2 buttons with mouse events

  I'm trying to code two buttons, both with the mouse to the bottom of the events, but to perform different functions. When I coded the script, I got the following error message:

  1021: duplicate function definition.

  Use different function names.

• Missing application components

  I am a fairly new user of CC. I mostly used Lightroom but start Photoshop a couple of times, but not for a few months. Yesterday I hit command-E from Lightroom on my Mac to use content-aware fill in Photoshop, but got a box saying "among application components are missing from the Application directory, please reinstall the application. I found that if I just waited a long time (like five minutes or more), a box eventually jump to the top that says "the file could not change because Adobe Photoshop CC could not be launched." But I also found that if I run Photoshop by double-clicking it in the Finder, it would begin end and would load the photo that I tried to work.

  So I used the application creative cloud to uninstall and reinstall Photoshop. It twice and always well behaved. Then I did a search and found a help page says Adobe to remove the locale folder and reinstall. I deleted the locale folder, but when I went back to Creative cloud I could not uninstall nor reinstall Photoshop like application CC says "Waiting." "Apart from Photoshop. I waited for half an hour and nothing happened. Then I discovered a uninstall application in the directory Photoshop CC so I tried to uninstall. Now the app CC said something else (I don't remember exactly what I had to get back to work) but I can not yet either uninstall or install Photoshop. I tried to close the CC application but when I restart it the situation is the same. I also tried to disconnect, but nothing happens.

  Any suggestions? I use the latest version of El Capitan.

  I found a solution!

  OS X has what is called a launch Services database. I think he's new in the latest version or two. It is supposed to make it easier for an application to launch another application, without using the Finder (I'm hardly an expert - I just did some research after I fell my landline). Unfortunately the data base can be screwed up. You can tell if it is messed up by right clicking on a document and then selecting 'open with... ». If multiple versions of an application are listed (for example, multiple versions of Photoshop when right-clicking on a file jpeg or Preview), then your database needs to repair.

  In any case, I used 3 CleanMyMac to repair the launch services database, and the problem disappeared.

  I have no idea how the database is corrupt or why uninstall and reinstall Photoshop does not she, but everything works fine now.

  Thanks to those who have tried to help.

  Jim

• Definition of Variables of severity of the code in the State

  HI -.

  Maybe it's somewhere in the docs, but I have not found.

  I have two Linux boxes that run a set overlapping process. One is the master, the other is a failover. What is currently the captain should be run all three processes, the other should be run only two. Because I'm not sure at any time which machine is going to be the master, I don't want to have two separate rules for watching these machines. I have the updated AppMonitor in place on the two processes at all three to the search. I can now determine the processes that are running on each machine:

  AppMonitor #InstancesFound = procA_on_machine1 where monitoredHost.name like machine1% and Application like '% procedure % '.

  AppMonitor #InstancesFound = procA_on_machine2 where monitoredHost.name like computer2% and Application like '% procedure % '.

  etc.

  Let's say that machine1 is the failover box and it runs only a process that is supposed to work. I want to set a Variable of severity level to Computer1 and another for the name of the process that is not running so that I can build an e-mail message that makes sense given the current state machines.

  So, how do I do (can I?) set a Variable of severity of the Groovy in the state code?

  Thank you

  -Craig

  You can define groovy expressions separated by a severity level, independent of the code of the state variables.

  for example

  the name of the expression: currentActiveNode

  expression:

  AppMonitor #InstancesFound = procA_on_machine1 where monitoredHost.name like machine1% and Application like '% procedure % ' #.

  If (procA_on_machine1 > 0) {return "Computer1"} else {return "Computer2"}

  the name of the expression: currentPassiveNode

  expression:

  AppMonitor #InstancesFound = procA_on_machine1 where monitoredHost.name like machine1% and Application like '% procedure % ' #.

  If (procA_on_machine1 > 0) {return "Computer2"} else {return "Computer1"}

  (Not really sure that the exact data you need, just an example)