obtain an expression of values missing error!

Similar Questions

• [Solved] 3 8 tab (TB3-850F) missing error 64 gb SD - SD Sandisk card, reinsert the device.

  I have a SanDisk Ultra 64 GB 48 Mbps MicroSD SDSQUNB UHS-I memory TF my said Tablet often missing and needs to be reinserted. I take out the card and was able to recover and it works for a while and later the error appears. Since then put the SD card, the Tablet sometimes turns off and won't turn on back in now the button for a few seconds. I am trying to use the SD card as internal storage.

  Is there a list of tested known working 64 gb SD cards for this Tablet?

  I would appreciate anyone using this exact model Tablet happy to let me know if they are successfully using a 64 GB SD card.

  I'm also confused because I bought this tablet it supports 64 GB cards according to the technical specifications that I saw on the Web site of the Lenovo Australia, but other pages to state that this tablet supports up to 32 GB cards.

  If the Sandisk card I have been tested to work, do you have suggestions on how to make it more reliable. I did a factory reset on the Tablet and he was always in trouble. My Tablet - hardware version is LenovoPad-TB3-850F, build number is 850F_S100025_160608_ROW-TB3. It is currently running 6 Android. I put the SD card in the SD Sandisk adapter and tried in my laptop and it works very well in my laptop (an old Acer laptop). Please let me know if you need further information.

  I just re-formatted the card to be used as a portable storage (not ideal but I can live with that) and will test it in the coming days.

  Edit: solved. See my post below.

  I bit the bullet and bought another brand 64 GB microSD card, and it works! -In short - use a Transcend brand card.

  For the record, my tablet is a Lenovo 3 8 ", TB3-850F tab; sold by Lenovo Australia such as tab 3 A8-50 with the number of product ZA170082AU. Android version 6.0, kernel 3.18.9, number of Build TB3-850F_S100025_160608_ROW. The TB3-850F_160412, Hardware version LenovoPad-TB3-850F software version.

  The adapters of SanDisk Ultra UHS - I 64 gb card, SDSQUNB part number - 064G - GN3MA, is not compatible with the Lenovo TB3-850F tablet.
  "Internal storage" map would work initially but after a short period, the missing error Sandisk SD card, reinsert the device. would appear. The card must be removed and then reinserted to work.
  As 'storage' map works initially but more later disappear, this time without error and require the withdrawal and rehabilitation at work.

  I tried reformatting the card on my laptop using a fat32 formatting tool, the Tablet would reformat the card once installed in any case if this step is not necessary.

  The adapters 'Premium' Transcend UHS - I 64 GB card, TS64GUSDU1 part number, has been installed and configured as "internal storage" and has worked well and remained functional after several power cycles, recharge and sleep/use of cycles.

  I hope this information helps someone.

• can't print emails from outlook express comes up with error line2253

  can't print emails from outlook express comes up with error

  line 2253

  See if this helps:

  www.oehelp.com/OETips.aspx#12

  You can print from IE?  OE uses the IE print engine, so test this.

  Steve

• How to fix Sqlite3.dll not found or missing errors?

  How to fix Sqlite3.dll not found or missing errors?

  Hello

  1. were there any changes (hardware or software) to the computer before the show?

  2. When you receive this error message?

  Follow the steps mentioned below and check if that helps.
  Method 1:
  You can perform a clean boot that allows to check if startup item or services to third-party application is causing a problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, be sure to start your computer in normal mode.

  Method 2:
  A few sqlite3.dll errors may be related to a virus or other infections of malware on the computer that has damaged the DLL file. Alternatively, you can run a Microsoft security scanner to make sure that the computer is free of infection by the virus:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note:  Before you perform security analysis, make a backup of important data.

• several errors at startup related to the file missing error rasman.dll

  several errors at startup related to the file missing error rasman.dll

  Hello

  1 did you changes to the computer before the show?
  2. What is the exact error message or error code?

  I suggest you perform the clean boot and check if that helps you.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135 
  Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual.

  It will be useful.

• Get a dvacore.dll is missing error

  Hello

  
  I am trying to change a sequence in Adobe Premiere Pro Audition.cc and I'm getting a dvlcore.dll is missing error and it asks me to reinstall the program. My question is could someone tell me what the problem is and what program (audion or creation) that I need to reinstall

  See you soon

  I think it's a dynamic link file, try reinstalling the PP and if this does not work, also reinstall to the.

• Passing parameters to the method call in expressions of value

  JDeveloper 11.1.2.1.0 does support the feature of passing parameters to method calls in expressions of value in JSF pages? AFAIK this is JSF 2 version it and it should support this feature. Unfortunately when I put in a JSF page the following tag
  < h:commandLink value = "#{row.employeeId}" action = "#{empBean.showDetails (row)}" / > "
  The page does not work. Any ideas on this point?
  
  Thank you to everyone.

  Hello

  The functionality you need is defined in JSR 245.
  If you need to wait for it to become part of the standard, it will be included in JEE6
  I don't know if 11.1.2.1.0 uses JEE6 standard...
  You can try this other thing,
  http://www.coderanch.com/t/213290/JSF/Java/why-JSF-calls-method-parameter

• ORA-12705: invalid parameter or unknown NLS value specified error in PL/SQL

  Everything works well, SQL * PLUS, shape and reports, but my PL/SQL Developer has stopped working.
  It is throwing this error when I try to connect.
  
  ORA-12705: invalid parameter or unknown NLS value specified error in PL/SQL developer
  
  
  How to fix this help please.

  First: most of the questions for Oracle products have a response depending on the version. In Oracle 11 g or 10g Oracle change the structure of their branch in the registry for example.

  Secondly, it seems that the registry is a little messy.
  Oracle for Windows identifies the part of the registry to use by reading the file
  % ORACLE_HOME%\bin\oracle. Key

  Probably with PL/SQL Developer, like PL/SQL Developer needs an Oracle customer, she will too.
  Of course, if this key points to a branch with NLS_LANG value NA this will result in questions, because this is not a valid value.
  %ORACLE_HOME%\Bin will usually be in your path

  ---------
  Sybrand Bakker
  Senior Oracle DBA

• Best way to express Boolean values in a table?

  Hello

  I'm looking for the best way to express Boolean values in a table. Is there a better way than this one?

  Men	Women	Children
  Yes	Yes	NO.
  NO.	Yes	NO.

  Or I guess I could draw that checked sign for Yes and X sign for no.? Or is there anywhere I can download those?

  Thank you!

  That would you say a solid bullet for YES, hollow for no-much easier to see the difference at a glance.

• VCAC 6.0: stuck in a loop of redirection? On the APP THE Catalina.out log shows 'value of invalid condition' and 'the validated expression is false': these errors are put in correspondence in time with the attempt to log on

  I try to connect to the basic vcac device by opening a browser for https:// < VCAC-applicance name >.companyname.com/shell-ui-app/ and I have connection with [email protected] and the password I know is good

  But what I get is just a ' send' button in the Northwest corner of the screen and I can't click on it. continues to change the text after the URL in the address bar and the "donut" (hourglass) keeps spinning

  the address in the url box is redirected to the device of the identity

  I restarted windows server running IAAS, the paralytic of identity and the VAPP VCAC 'CORE' and I always put the question in all the browsers I'm looking for

  That is likely to be a problem of synchronization (NTP) time of 98%. Ensure common NTP, then go a little further and make sure that all the hosts as the vCAC bits are running on are also synchronized.

  Grant

• Reach target FIFO / missing error methods

  In my project, there are two FPGA vi and 4 pairs (reading and writing) of FIFO extended target that are used to pass data between the two vi.

  A vi FPGA (named rs232.vi) writes the data it obtains from a port RS232 to READ FIFO; also, it reads data ENTRY FIFO and transmits to the ports.

  The second vi FPGA (named griffin commands.vi) writes data to WRITE FIFOs and reads data from READ FIFOs. There is no other vi in the project.

  When I try to run either of the vi, I get an error about missing methods to FIFOs. For example, when I run rs232.vi, I get an error requiring a reading memory FIFO so that the read method (see the image named side rs232) and who should write FIFOs have Scripture metod presend on the vi block diagram. However, these 'missing' methods are present in the second FPGA (as I described above). The same type of error appears when I run the second.vi.

  Why the compiler can't see I have all the methods; However, they are in 2 separate vi? How can I avoid this error?

  SophieJS wrote:

  Why is - a VI is not the top level vi?

  It would be nice too, as long as one of them call each other. I don't see in your screenshot, however.

• Expression of the Groovy error after migration to 12.1.3.0.0 12.2.1.0.0

  I have a variable binding in a ViewCriteria, who worked at jdev12c (12.1.3.0.0).

  This variable has an expression like this:

  adf.object.applicationModule.parametros.get("NOMBRE_INFORME")
  

  When I upgrade to the new version 12.2.1.0.0. I get this error:

  groovy.lang.MissingPropertyException: No such property: applicationModule for class: oracle.jbo.common.VariableImpl$VariableExprValueSupplier
    at oracle.jbo.script.InternalSecurityPolicyEnforcer.checkProperty(InternalSecurityPolicyEnforcer.java:209)
    at oracle.jbo.script.InternalSecurityPolicyEnforcer.checkProperty(InternalSecurityPolicyEnforcer.java:179)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:497)
    at org.codehaus.groovy.reflection.CachedMethod.invoke(CachedMethod.java:90)
    at groovy.lang.MetaMethod.doMethodInvoke(MetaMethod.java:324)
    at org.codehaus.groovy.runtime.callsite.StaticMetaMethodSite.invoke(StaticMetaMethodSite.java:43)
    at org.codehaus.groovy.runtime.callsite.StaticMetaMethodSite.call(StaticMetaMethodSite.java:88)
    at org.codehaus.groovy.runtime.callsite.CallSiteArray.defaultCall(CallSiteArray.java:45)
    at org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:108)
    at org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:124)
    at com_edisa_libra_informes_ejecutor_informes_model_adfbc_views_GiInfUsuariosGuardadosDefView_DynamicCodeSource.pTipoDespliegueInforme_expression_Variable(com_edisa_libra_informes_ejecutor_informes_model_adfbc_views_GiInfUsuariosGuardadosDefView_DynamicCodeSource.groovy:8)
  

  How can I get bindvariable ApplicationModule?

  JDeveloper 12.2.1.0.0

  Finally, the error was the transientExpression a attribute trustMode = "not reliable."

  Migration process modify this attribute to untrusted value sometimes. There's a bug in there.

• Missing error profile

  Firefox does not load. Error is "profile is missing or incomplete. I tried Firefox in removing and reinstalling. Same mistake. Where is my profile and how to fix it?

  Try to remove the profiles.ini file to force Firefox to create a new default profile.

  • http://KB.mozillazine.org/profiles.ini_file
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Bootmgr missing errors illustrated the reinstallation of Vista

  Hi, (this is my first post)

  I noticed that my pc was running long-legged I ve tried everything and I had nothing to lose so I if I could start a clean condition, I had the Vista repair disks that I created using vista Toshiba disc creator, I used them and he said that he failed or something and the pc crashed everything. Now when booting via disk HARD I received this
  "bootmgr missing".

  So I tried to boot in the disks that I created with the software of Toshiba and I received the same error, I have no Vista installation DVD and I'm lost.
  What should do?

  Any help would be appreciated.

  Can you start installation of HARD drive?
  It is described under http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

• Printhead HP 6500, missing error message

  I bought a 6500 all in one printer a year ago in March. The printer has not been used much, a few pages a day. Several months ago the printer started to display the error message "Missing Printhead' and wouldn't work at all." I followed the instructions to remove and clean the cartridges and print heads. Still have the same error message. Talked to HP support a couple of times, without success, it is. Apparently. the printhead of 6500 is not something supported, I was told that HP is not in stock this point and so I can't replace it. The proposed solution was to "buy a new printer. At best, I find that this is an unacceptable solution. If someone has solved this problem or is my 6500 relegated to the trash with HP printer support image of?

  After the replacement of a set of ink cartridges, I got two errors - error the printhead and the ink system failure error. So what I've done for my 6500 wireless when I received the error "print head seems to be missing or corrupt"

  I removed my ink cartridges, then I removed the print head itself. It was very dirty. I went to wash the whole in the sink. Then I put it in front of my hair dryer for about 20 minutes, allowing the air to dry completely.

  In the meantime, I looked inside the printer housing and saw on the right side (where the print head and print cartridges reside) sink much ink seems to have been a leak or possibly be thrown everywhere during the printers cleaning print head adjustment or everything what he continues to do all the time when nobody is there.

  Ink has been around in there. I removed the small sponge and took tips and paper towels and just kept wiping everything in there.

  20 minutes later, I placed the print head and cartridges back inside. Bugger, I always received the printhead error message... don't leave yet, there is more to my story... I then take a look at electronic ribbon cables all seemed to be free of any tears or cuts. But I decided to try it on the print head and the cable against the back to slide a thin stalk behind them tear their to the printer just a bit so that they would make a better contact. The side which is sticky I wasn't behind the sticky in this procedure, just at the edge of the top and SDÉS I could. You may damage the ribbon cable if try to do more than just a little bit of pressure.

  Once I turned the printer back on, it gave me an error that I had forgotten to put in the ink cartridges.

  I then unplugged the printer, replaced the cartridges and then plugged in and the printer is powered on.

  WAIT he went through a process of preparation, then an alignment process and 10 minutes later there was no error Printhead and ink system error more. It has been proerly of work for a few days and I think it's fixed!

  

  I hope this helps someone, anyone, as I know I paid a bit for my 6500, and was very disappointed when mistakes happened because I don't use a lot of the printer and I've always kept what it takes. I was just happy to make it work again.

  One thing that I hate this all-in-one printer is the fact that if you get errors of impression that the stupid thing will not even let all other functions work. No analysis, no sending of faxes. It was very agrvating!