Obtaining the value with the checkbox inside the IR

Similar Questions

• Passing the value with coma inside to another page

  Hi all, need your help.

  I have trouble to clarify how to pass value with coma to another page.

  For example, I have a P2_NAME field: with the current value: Test, name

  When I'm passing this on page 3 I get only from Test. I do not understand why, but I do not know how to deceive the APEX?

  var url = ' f? p = & APP_ID.:3: & SESSION.: NO::P2_NAME: "+ $v ('P3_NAME');

  Window.Open (url, "name", "height = 600, width = 800, toolbar = no, directories = no, status = no, menubar = no, scrollbars = no, resizable = no, modal = yes");

  Thank you very much

  Andrei

  Hello

  This might help

  2.5 understanding URL syntax

  List of values of the element used to define the session state in a URL.

  Item values cannot include settlers, but may contain commas with backslashes.

  To change a comma in a value element, place the characters with the backslashes. For example:

  \123,45\

  Kind regards
  Jari

• How can single checkbox can be selected in the table with Boolean checkboxes?

  I have a table editable ADF where an attribute is a Boolean checkbox... and stores the value with Y or N.
  
  Is there a way where the single checkbox must be selected at time of posting?
  
  For example, in the case its a table of responses to a choice unique to an application of Questionnaire, Question by adding new responses to the table..., the user inserts 3 rows (answers)... then the Boolean checkbox for only one of these 3 rows can be verified.
  
  Thank you
  DJ

  Since you have an attribute that has the "Y" or "n" for each line.
  When the user selects a line, you must deselect the other lines using the value change listener pro-grammatically.
  If the number of rows is large, it could be performance intensive.

  Thank you
  Nini

• Can I copy the contents of a form field to another field with toggle checkbox?

  Would it not possible to copy the contents of a form field to another field in the form once a checkbox is disabled?

  I have several form fields that require form-fill to enter their initials.  Rather than repeat this 20 - 30 times on a form, they would like to be able to write their initials somewhere and that their initials copy in another form with a checkbox Toggle field.

  So, I have a field called 'initial' and each of the original boxes are "init_entry1" "init_entry2" etc.

  The boxes for these areas are "check_entry1" "check_entry2" etc.

  This would be possible with scripts?  Or are there better ways to accomplish the initial AutoComplete with a checkbox toggle?

  You can use a code like this in the MouseUp event of your box:

  If (getField("Check_Box1").value! = "Off")

  getField("Text2").value = getField("Text1").value;

  else getField("Text2").value = "";

  Of course, you have to adapt the names of the fields.

• What are the possible values for a checkbox?

  I am filling a PDF with an asp.net web form. I get the filled text ok boxes, but I can't set the checkboxes. I'm testing to see if a web form checkbox is checked. If this is the case, I tried to put the value of pdf checkbox on 'on '. But this does not seem fair.

  Looks like my asp.net code:

  If CheckBox1.Checked then

  AF. SetField ("pdfbox1", "On")

  End If

  Any suggestions?

  Thank you

  The value is the value in the option "Export value", when the form is created. You can use the Acrobat JavaScript "exportValues" property to get the array of values to the same named boxes. And if you know the "trick" of the box, you can use the method "isBoxChecked" to check if a given 'widget' is checked. More information is contained in the Acrobat JavaScript documentation.

• Set the value of a checkbox in a column of a tree control

  Hello

  I couldn't ' find the feature set/get the value of a checkbox in a column of a tree control.

  Thank you for your help

  Bertrand

  Hi Bertrand, this discussion should help you in this task.

• In some emails that I get in Windows Mail I have little boxes with red x inside in the message body where a logo or a picture should be.

  In some e-mails I receive (Windows Mail), I have little boxes with red x inside in the message body where a logo or a picture should be. How can I get the logo to show?

  Tools | Options. On the reading tab, make sure that you do not read in plain text. On the Security tab, uncheck the box: «block images...» "

  If you still get the red X, it was how it was sent and there is nothing you can do on your end.

• Lightroom CC: Develop module: I see only a blue box with a cross inside. If I select before / after, I can only see the picture before and not after after is displayed as a blue box with a cross inside. I can make adjustments, but I don't see them because

  Adobe Lightroom CC:

  Develop a module:

  Instead of my photos were corrected, I see only a blue box with a cross inside.

  If I select before / after, I can only see the picture before and not after (the corrections).

  After appears as a blue box with a cross inside.

  I can make adjustments, but I do not see them because the image after is not visible, it is a blue box with a cross inside.

  Thanks in advance for your help.

  Disable the option of processor graphics use in the performance of the LR preferences section.

• VM have been storage vMotioned to another data store, and now I have 3 VM with white "!" inside a red square and I want to understand the cause of this.

  VM have been storage vMotioned to another data store, and now I have 3 VM with white "!" inside a red square and I want to understand the cause of this.

  Can you try to make a vmotion host and see if it gets resolved? If not, can you close the virtual machine and start again? I have seen this problem before and a stop and start resolved.

• How to compare the new values with the old values in triggers.

  Dear all,
  
  Please tell me how to compare the new values with the old values in triggers.

  Hi, the employee example is in the document. You'd better read yourself.

  CREATE OR REPLACE TRIGGER Print_salary_changes
    BEFORE DELETE OR INSERT OR UPDATE ON Emp_tab
    FOR EACH ROW
  WHEN (new.Empno > 0)
  DECLARE
      sal_diff number;
  BEGIN
      sal_diff  := :new.sal  - :old.sal;
      dbms_output.put('Old salary: ' || :old.sal);
      dbms_output.put('  New salary: ' || :new.sal);
      dbms_output.put_line('  Difference ' || sal_diff);
  END;
  /
  

• How to disable certain fields in the form of a calculation with a checkbox for the fields.

  How to disable certain fields in the form of a calculation with a checkbox for the fields.

  In Canada, we have taxes

  I create a form that allows them to calculate a total

  

  I need to be able to turn off all of those taxes to participate in the calculation and to their field visible should be 0

  I was thinking about using a check box (when the checkbox is enabled (Yes) the tax is calculated, unchecked (Off) the tax is not calculated and visible field should show 0 or anything...)

  I really need help on this one, I am a complete newbie...

  Note that the second tax is calculated on the sum of what the first tax Add (tax first is pan-Canadian tax (all provinces).

  The second tax is never only use (Quebec only (in addition to one Canadian)

  Sometimes to sell outside Canada - no tax at all is calculated...

  What should I do?

  Yes, it's just the JS...

• Replace the Null values with zero in MDB

  Hello
  
  How can I replace Null values with zero in MDB. I tried NVL (column_name, 0), he said: syntax error.
  
  Thanks for your time and your help.

  Hello

  In the layer of Buisenss you always use IFNULL (column, 0)

  Concerning
  Adil

  Published by: adil.harrab on April 8, 2011 17:33

• Need to null values with the values of filling the date before weekend/holidays

  I have a table with a Date column, column Type and rate column.
  
  The problem is when the weekends and holidays, column Type and rate column are null.
  
  I need all null values with the values of Type and fill rate before that date is the weekend and public holidays.
  
  Example:
  
  I have:
  
  RATE OF TYPE DATE
  07/01/2010 4510 PM 3.71
  07/01/2010 CETE28 4.59
  07/01/2010 TIIE28 4.95
  07/02/2010 4510 PM 3.82
  07/02/2010 CETE28 4.63
  07/02/2010 TIIE28 5.11
  * NULL NULL 07/03/2010 *.
  * NULL NULL 07/04/2010 *.
  07/05/2010 4510 PM 3.91
  07/05/2010 CETE28 4.74
  07/05/2010 TIIE28 5.25
  
  Will be:
  
  RATE OF TYPE DATE
  07/01/2010 4510 PM 3.71
  07/01/2010 CETE28 4.59
  07/01/2010 TIIE28 4.95
  07/02/2010 4510 PM 3.82
  07/02/2010 CETE28 4.63
  07/02/2010 TIIE28 5.11
  * 07/03/2010 4510 PM 3.82*
  * 07/03/2010 CETE28 4.63*
  * 07/03/2010 TIIE28 5.11*
  * 07/04/2010 4510 PM 3.82*
  * 07/04/2010 CETE28 4.63*
  * 07/04/2010 TIIE28 5.11*
  07/05/2010 4510 PM 3.91
  07/05/2010 CETE28 4.74
  07/05/2010 TIIE28 5.25
  
  What could I do?

  Hello

  You can use the analytic LAST_VALUE function to get the last day of work before each date into your table. It will be the same as the current day for every day of work.
  Do it a self-join to combine each current line (c) with the last day of work (l):

  WITH     got_last_work_day     AS
  (
       SELECT     dt, type, rate
       ,     LAST_VALUE ( CASE
                      WHEN  type  IS NOT NULL
                      THEN  dt
                     END
                     IGNORE NULLS
                    ) OVER (ORDER BY dt)     AS last_work_day
       FROM     table_x
  )
  SELECT       c.dt, l.type, l.rate
  FROM       got_last_work_day     c
  JOIN       got_last_work_day     l  ON       (    c.dt          = l.dt
                           AND  c.type          = l.type
                           )
                         OR     (    c.last_work_day     = l.dt
                           AND  c.type          IS NULL
                           )
  ORDER BY  c.dt
  ,       l.type
  ;
  

  Among other things, I guess that the type is NULL if (and only if) the line represents a holiday or weekend, and that the combination (dt, type) is uniuqe.

• Checkboxes inside the tree

  Is it possible to add checkboxes inside the tree as elements. Can someone please provide an example of code for this?

  Hello

  See http://www.sephiroth.it/file_detail.php?id=151 . I think it's fault that you need.

• How to group and summarize the values with a vertical drop of 100?

  Dear gurus
  How to group and summarize the values with a vertical drop of 100 as the data indicated below:
  
  Cas_Cod_ Cas_Amt_ Description
  300 1000A
  301 200 B
  302 350 C
  400 500 A
  401 100 B
  402 25
  
  Now the data should be grouped like this
  A (300,400) = 1500
  (301,401) B = 300
  C (302,402) = 375
  
  Make sure that I don't have a column as description in my table to group data on description, its here just to give u an example.

  Hello

  using mod for hundreds:

  with x as
  (
    select 300 code, 1000 amt, 'A' descr from dual union all
    select 301 code, 200 amt, 'B' descr from dual union all
    select 302 code, 350 amt, 'C' descr from dual union all
    select 400 code, 500 amt, 'A' descr from dual union all
    select 401 code, 100 amt, 'B' descr from dual union all
    select 402 code, 25 amt, 'C' descr from dual
    )
     select mod(code,100) code, sum (amt)
      from x
     group by mod(code,100);
  

  Using the mod you get the rest of a division, so mod (300,100) = 0, mod (301,100) = 1, etc.

  Herald tiomela
  http://htendam.WordPress.com

• Values with the HTML not getting informed when using AJAX in the APEX

  Hello
  
  I use AJAX to fill some values in a tabular report.
  
  I have a java script of this form (I took this example Denes http://apex.oracle.com/pls/otn/f?p=31517:241:1400877312570049) example
  
  

  < script language = "JavaScript" type = "text/javascript" >
  
  function f_set_multi_items_tabular (pValue, bow) {}
  get var = new htmldb_Get (null, html_GetElement('pFlowId').value,
  = Set_Multi_Items_Tabular', 0);
  {if (pValue)}
  Get.Add ('TEMPORARY_APPLICATION_ITEM', pValue)
  Get.Add ('T_ROWNUM', Prow)
  } else {}
  Get.Add ('TEMPORARY_APPLICATION_ITEM', 'null')
  }
  
  gReturn = get.get ('XML');
  
  {if (gReturn)}
  var l_Count = gReturn.getElementsByTagName("item").length;
  for (var i = 0; i < l_Count; i ++) {}
  var l_Opt_Xml = gReturn.getElementsByTagName ("item");
  var l_ID = l_Opt_Xml.getAttribute ('id');
  var l_El = html_GetElement (l_ID);
  {if (l_Opt_Xml.firstChild)}
  var l_Value = l_Opt_Xml.firstChild.nodeValue;
  } else {}
  var l_Value = ";
  }
  
  {if (l_El)}
  If (l_El.tagName == 'INPUT') {}
  l_El.value = l_Value;
  } Else if (l_El.tagName == 'SPAN' & & l_El.className == 'Raptor') {}
  l_El.parentNode.innerHTML = l_Value;
  l_El.parentNode.ID = l_ID;
  } else {}
  l_El.innerHTML = l_Value;
  }
  }
  }
  }
  get = null;
  }
  
  < /script >
  
  And I the process of application as follows
  

  BEGIN
  OWA_UTIL.mime_header ("text/xml", FALSE);
  HTP.p ('Cache-Control: non-cache');
  HTP.p ('Pragma: non-cache');
  OWA_UTIL.http_header_close;
  HTP.prn ("< body >");
  HTP.prn ("< desc > This XML genericly defines several elements < / desc > '");
  HTP.prn ("< item id =" f05_000 "|: T_ROWNUM |" "> ' |: TEMPORARY_APPLICATION_ITEM |") ("< / item > ');
  HTP.prn ("< / body >");
  END;

  If I have: TEMPORARY_APPLICATION_ITEM as "Vikas" gets it displays correctly, but if I "& lt;" b & gt; Vikas & lt; b & gt;' it shows null. If she tags HTML function l_Opt_Xml.firstChild.nodeValue does not correctly work.

  Please tell me what modiifcation can I use in the l_Opt_Xml.firstChild.nodeValue function to get values with HTML tags also to are displayed.
  
  Thank you
  Vikas

  Vikas,

  Try to escape special characters:

  htf.escape_sc(:TEMPORARY_APPLICATION_ITEM)
  

  Kind regards
  Dan