OC C2D 3.0

Similar Questions

• Satellite A300-1ED - upgrade CPU of PDC to C2D

  Hi all
  Small question. I still have six months toshiba warranty on my A300-1ED. laptop is very good. Never fail. But it lacks performance so I want to upgrade my PDC T2390 to some C2D processor.
  Tell me what model of C2D my A300-1ED runs (card mother and bios)? T7500? T5750? Frequency FSB? 667 or 800?

  Someone at - he do it before?

  Thanks for all the tips!

  Hello

  First of all, you will lose the warranty if you would disassemble the laptop!
  This should be clear to you.

  Then there is no guarantee that your laptop would go well and stable after this upgrade the CPU.
  I m thinking about issues of compatibility between the processor and BIOS since the BIOS was pretested with the other processors.

  However, I have read some threads here on the CPU upgrade and some users do that
  Seems that some laptops run without any big problems after upgrade CPU, but I think it's not consistent for all series

  Perhaps this topic could be useful:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53802
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=205508

  Welcome them

• Z60m & c2d

  Correct me if I'm wrong.

  T60 and z60 are almost the same. There are with Core 2 duo procesors, or even simply dual core t60. So if I bought the t60 c2d anywhere, it should work with mine z60m?

  With all that said, you can throw in an a Z61m motherboard in your shell and then install a C2D processor.

  If it would be financially feasible is another thing, but it can be done.

• I want to install Server 2008 in c2d 2.6 ghz is possible

  Hello

  I want to install Server 2008 in c2d 2.6 ghz is possible

  Kind regards

  Patrice Hiren

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• CPU upgrade for dc7700 C2D 6300 to Pentium D 3.2 XE?

  Hello everyone, I recently bought a HP/Compaq dc7700 SFF with a processor intel Core 2 Duo E6300 1.86 GHz. I have a spare Intel Pentium D 940 Extreme Edition @ 3.20 GHz and I wonder if there is much exchange gain it in. The OS is win7 64 bit, 8 GB RAM. the two procs are LGA775 socket.

  Thanks in advance!

  Thanks for the replies. In the search further, it seems that the C2D E6300 offer performance equal to the old Pentium D 3.2 with less electricity and heat consumption, so I'll leave it as what.

  Thanks again.

• My Firefox (newest to date), every time when I start it becomes (not responding) above the bar and stands still for about 30-40 seconds, and then it starts, every time - that's why? (C2D t2500 L2 = 2 MB, ram 2 GB, Kaspersky, Win7Ult)

  No Crash at all, but the work too bug and very often goes unresponsive for a while even during countinual usage, and also, when browsing web pages with many images its RAM usage set to 1, 8 G and more (for example. Facebook, big albums) where is the problem with this 2 parts in stock, and what can I do such things for shelves

  For some ideas, see Firefox takes a long time to start and Firefox crashes or does not - how to fix .

  You can also go through troubleshoot and diagnose problems of Firefox, step by step.

• R61 C2D and Fedora 10 with the desktop effects

  Hello!

  I resized my boot partition in order to get Fedora 10 installed. Now I have a dual-boot machine.

  Does anyone know how to enable "desktop-effects"? If I let the screen turns white.

  Do I have to install the nvidia drivers? (packages available from lenovo?) I installed all the packages are from fedora. If the fingerprint sensor also does not work, but it's ok.

  Modell 8914-W29 with nVidia Quadro NVS 140 M (rev a1)

  xorg-X11-Server-Common-1.5.3-6.fc10.i386

  2.6.27.9 - 159.fc10.i686

  I solved it by myself:

  Take a look at

  http://www.ThinkWiki.org/wiki/NVidia_Quadro_NVS_140m

  and install the latest nvidia driver native, you can find here

  http://www.nvidia.com/object/UNIX.html

  Keep in mind that it requires gcc, kernel-devel and perhaps other RPM. The installation routine will complain if the requirements are not met.

  Installation (HS / NVIDIA...) must be in runlevel 3 (telinit 3) and it is necessary to repeat it after a new kernel is installed.

  And you're done!

• Cannot install Adobe Reader!

  Hello. I had to bring my Mac, but for now it only works on 10.5.8. I am trying to install Adobe Reader, but the new version does not work. I've done some looking to find a version that did, and they (Adobe) say that the X version work. Now when I try to download an older version of them, it does not work, giving me the error "following failed install step: run the script preinstall for payload.» This is for version XI, which should still work. When I try to use the Adobe Web site to download the older versions, the site goes down only to OS X 10.6.4. I found a site of Adobe for older versions which had version 10.1, but when I downloaded and installed, the installer wanted to select a player version to update. Of course, I didn't drive, so there is nothing to update.

  So I'm stuck. I can't find a version 9.4, Intel, or a reliable download for the 9.5. I would like to be able to download and work with PDF files, but for now, all I have found.

  Any help is appreciated.

  MBP mid 2009, Intel C2D

  Can try this...

  Adobe Reader 9.4.0 PPC

  9.5 9.4 needs to update.

• Apple mail opens at as slow startup

  10.11.4 OSX iMac late 2009 3.06 GHz C2D - Apple Mail opens at startup... have checked everything and can't find a reason.  It is a configuration of the mailbox complex with a lot of emails that was running on Yosemite.  You probably need to rebuild all this.  Thank you

  Open System Preferences > users and groups and select the login items tab.

  Delete the Mail from the login items list, then restart your Mac.

  Select the check box to the left of the mail, and then click the - (less) button. That will keep the at startup launch Mail app.

• Upgrade of the Os Mac mini 1.1

  I wonder - is this useful for rehabilitation of 10.6.8 to 10.7.5 my mac mini 1.1 I put to level with 2 GB of ram and cpu with c2d 2, 33Ghz? Will I feel a difference on 10.7.5?

  You can't go to Lion. The MacMini 1.1 is limited to Snow Leopard.

  The MacMini 2.1 is expandable to Lion.

• Satellite Pro A300 - how to fix Storage Manager?

  I accidentally deleted Intel Matrix Storage Event Monitor from my list of startup., it's a good utility, since it will inform me on the hard drive problems.

  I tried to uninstall and then reinstall the package Intel Matrix Storage Manager (downloaded drivers from Toshiba Support), but I have not had any results, do not have this program at startup.

  Can you give any suggestions, how to completely uninstall this package, so that I could perform the new installation of the package?

  My system:
  Toshiba Satellite Pro A300: C2D 8300, 4GB, 250 GB (a hard drive in the system), Intel mobile chipset P965. OS: Windows 7 64-bit.

  Thank you in advance!

  Hello

  Just a simple question: have you tried a system restore to an earlier point? This should bring back the Storage Manager.

  Check this box!

• Compaq Presario C700: Compaq Presario C700 maximum upgrades. CPU/SODIMM

  Hello

  Please answer suite

  1. how to get the maximum for components upgrades

  CPU / SODIMM given the configuration of the model Compaq Presario C797EE mentioned at the end.

  2. Why is there BIOS ver F.35 for Presario C700 when later offered is the worm F.34 bios on HP web. What is the difference. Where can I find both to be uploaded with the release notes. New BIOS on model C797EE allows processors support Intel Core 2 Duo X 9000 and PC6400 SODIMM for 8 GB?

  3. There is evidence of success update here. Only difference is its Compaq Presario C797EE but C771US not and was able to upgrade CPU Core 2 Duo T9300. Is it possible to upgrade series C700 (C797EE) to Intel C2d Extreme X 9000 processor. If this is not the case, what is the max for the chip set used in C797EE.

  4 NT are different for Intel T9300 and others by 35W 44W or any other factor, will they perform the upgrade, if yes then please provide last possible list compatible CPU my current chip-set

  Comparative analysis of the applications here are showing different results. Please see Sandra chipset readings compare to the results of CPU - Z.

  I will be grateful

  Thank you.

  Current configuration of the system:

  identified by different applications

  CPU - Z:

  Chipset: Mobile Intel (r) 965 Express Chipset Family

  CPU: Intel (r) Core (TM) 2 Duo CPU T5750 @ 2.00 GHz

  Socket P (478)

  Memory: DDR2

  Format of SO-DIMM

  Size 2048 MB

  Bandwidth Max PC2-5300 (333 MHz)

  DMI BIOS

  vendor Hewlett-Packard

  Hello, just let everyone know that my upgrade worked.

  -Processor

  Updated for intel T9300 as reference. probably could support the x 9000, but it was much more expensive is not a value

  -Memory:

  I was skeptical with past more than 4 GB, however, currently functioning 6 GB (2 X 4). foung are not accidents of errors due to modules. Works perfectly.

  . After these updates, I installed small SSD, which added to the startup that gave more boost to the system.

  . Replaced the DVD with Caddy drive through visruth, installed with 1 TB

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/dimension-of-DVD-CD-used-in-Compaq-Presario-C700/m-p/4926179

  . Replaced with 12 cells battery

  Conclusion:

  This unit of 8 years demonstrated startup, transformation and loading speeds that could be compared to couple of old machines, 6 GB working memory space that can accommodate witout heavy programs using the file (actually disabled) Exchange and on the storage of Tera bytes to store every necessary thing making the year becomes mordern General phone use. Only thing that is not dealing with it is the graphics card. Besides that all is well, infact it runs more more fees than before.

  Thanks for your advice

• Satellite A200 - slow flash cards

  I have a Toshiba A200 1s 5 laptop with Vista Home Premium pre-installed. C2D [email protected], 2 GB of RAM.

  The problem is that the utility flash cards is very slow. It takes a long time from when I press the FN button until the cards appear. In addition, the slow short utility. Sometimes it won't appear even. I understand that you really need these flash cards to use the function keys without which they will not work.

  Are there any known issues with this utility or do I just try put it back? I have this problem since I bought the laptop and I never have a relocation or recovery. Thus, all the software that came with it are original.

  Excuse my bad English.

  Hello

  We know that the previous version is quite slow. Toshiba has offered the new version and now it works quickly. Please remove preinstalled value-added Package and install the latest version you will find on the download page of Toshiba.

  Good bye

• MacBook 2006 does not recognize the Canvio Stor.e

  Hello world!

  I bought this external HDD Stor.e Canvio (2 TB usb2/3),
  The problem is that it only appears not on the macbook in 2006 (2 GB ram 2 GHz c2d OSX 10.4) I bought it for.

  But:
  The HARD drive is perfectly recognized by my macbook pro.
  Other external hard drives are recognized by the macbook (2006), no problem here (even usb powered works of readers, the canvio has its own power plug). The canvio is formatted in Mac OS.

  Clearly, I do not understand the problem, it should work.
  And the 2006 is compatible if I read the news of the canvio box.

  No idea how to run is more than welcome.

  Thank you!

  PS: latest news, the canvio appeared on the 2006 once or twice, but I don't know what was 'different' these times.

  Hello

  First of all it s not the HARD problem because this HARD disk drive works fine in the other computer (Macbook).

  This HARD drive supports the USB 3.0 standard but it s compatible with the USB 2.0 standard.
  The point is that the USB 3.0 offers 900mA. The USB 2.0 port common supports only 500mA.

  I think the problem is the low power supplied by Macbook s USB port. In this case, you must use a USB Y cable in order to connect the HARD drive to 2 USB 2.0 ports.

  Not sure if it will really solve your problem, but I think that this should be verified

• The Satellite A100 processor upgrade

  Supports the Chipset I945PM C2D T7200/400/600 processors based on the Intel site (http://ark.intel.com/chipset.aspx?familyID=22817 - compatible products).
  but I can't find any information on the compatibility of the BIOS.

  What processors are compatible with the latest version of BIOS for A100?

  Hello

  These information are not available on the Toshiba page.
  But there are different A100 with different hardware components.
  You can check some A100 with different processors, and then you will know what the processors supported for you would be.

  But there is a weak kind of risk for all other processors. If you need only test this
  But note; stronger central units could affect the functionality of a laptop because of the higher heat dissipation.